Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  mpc85xx: Add inline GPIO acessor functions
  powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
  powerpc/85xx: Fix P2020DS booting
  powerpc/85xx: Update USB device tree status based on pin settings
  fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
  powerpc/85xx: Add support for RMan LIODN initialization
  powerpc/85xx: Update device tree handling for SRIO
  powerpc/85xx: Update setting of SRIO LIODNs
  fm: Don't allow disabling of FM1-DTSEC1
  fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree

arch/powerpc/cpu/mpc85xx/fdt.c

@@ -537,6 +537,27 @@ void fdt_fixup_fman_firmware(void *blob)
 #define fdt_fixup_fman_firmware(x)
 #endif
 
+#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+static void fdt_fixup_usb(void *fdt)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+	int off;
+
+	off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
+	if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
+				FSL_CORENET_RCWSR11_EC1_FM1_USB1)
+		fdt_status_disabled(fdt, off);
+
+	off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
+	if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
+				FSL_CORENET_RCWSR11_EC2_USB2)
+		fdt_status_disabled(fdt, off);
+}
+#else
+#define fdt_fixup_usb(x)
+#endif
+
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	int off;
@@ -641,6 +662,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 	do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 			"clock_freq", gd->bus_clk, 1);
+
+	fdt_fixup_usb(blob);
 }
 
 /*

arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c

@@ -504,9 +504,6 @@ void fsl_serdes_init(void)
 	const char *srds_lpd_arg;
 	size_t arglen;
 #endif
-#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
-	enum srds_prtcl device;
-#endif
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001
 	int need_serdes_a001;	/* TRUE == need work-around for SERDES A001 */
 #endif
@@ -787,11 +784,4 @@ void fsl_serdes_init(void)
 			     SRDS_RSTCTL_SDPD);
 	}
 #endif
-
-#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
-	for (device = XAUI_FM1; device <= XAUI_FM2; device++) {
-		if (is_serdes_configured(device))
-			__serdes_reset_rx(srds_regs, cfg, device);
-	}
-#endif
 }

arch/powerpc/cpu/mpc85xx/liodn.c

@@ -40,6 +40,21 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset)
 	return liodn_bases[dpaa_dev].num_ids;
 }
 
+static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++) {
+		unsigned long reg_off = tbl[i].reg_offset[0];
+		out_be32((u32 *)reg_off, tbl[i].id[0]);
+
+		if (tbl[i].num_ids == 2) {
+			reg_off = tbl[i].reg_offset[1];
+			out_be32((u32 *)reg_off, tbl[i].id[1]);
+		}
+	}
+}
+
 static void set_liodn(struct liodn_id_table *tbl, int size)
 {
 	int i;
@@ -133,11 +148,42 @@ static void setup_raide_liodn_base(void)
 }
 #endif
 
+#ifdef CONFIG_SYS_DPAA_RMAN
+static void set_rman_liodn(struct liodn_id_table *tbl, int size)
+{
+	int i;
+	struct ccsr_rman *rman = (void *)CONFIG_SYS_FSL_CORENET_RMAN_ADDR;
+
+	for (i = 0; i < size; i++) {
+		/* write the RMan block number */
+		out_be32(&rman->mmitar, i);
+		/* write the liodn offset corresponding to the block */
+		out_be32((u32 *)(tbl[i].reg_offset), tbl[i].id[0]);
+	}
+}
+
+static void setup_rman_liodn_base(struct liodn_id_table *tbl, int size)
+{
+	int i;
+	struct ccsr_rman *rman = (void *)CONFIG_SYS_FSL_CORENET_RMAN_ADDR;
+	u32 base = liodn_bases[FSL_HW_PORTAL_RMAN].id[0];
+
+	out_be32(&rman->mmliodnbr, base);
+
+	/* update liodn offset */
+	for (i = 0; i < size; i++)
+		tbl[i].id[0] += base;
+}
+#endif
+
 void set_liodns(void)
 {
 	/* setup general liodn offsets */
 	set_liodn(liodn_tbl, liodn_tbl_sz);
 
+	/* setup SRIO port liodns */
+	set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz);
+
 	/* setup SEC block liodn bases & offsets if we have one */
 	if (IS_E_PROCESSOR(get_svr())) {
 		set_liodn(sec_liodn_tbl, sec_liodn_tbl_sz);
@@ -164,6 +210,42 @@ void set_liodns(void)
 	set_liodn(raide_liodn_tbl, raide_liodn_tbl_sz);
 	setup_raide_liodn_base();
 #endif
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+	/* setup RMan liodn offsets */
+	set_rman_liodn(rman_liodn_tbl, rman_liodn_tbl_sz);
+	/* setup RMan liodn base */
+	setup_rman_liodn_base(rman_liodn_tbl, rman_liodn_tbl_sz);
+#endif
+}
+
+static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
+{
+	int i, srio_off;
+
+	/* search for srio node, if doesn't exist just return - nothing todo */
+	srio_off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio");
+	if (srio_off < 0)
+		return ;
+
+	for (i = 0; i < srio_liodn_tbl_sz; i++) {
+		int off, portid = tbl[i].portid;
+
+		off = fdt_node_offset_by_prop_value(blob, srio_off,
+			 "cell-index", &portid, 4);
+		if (off >= 0) {
+			off = fdt_setprop(blob, off, "fsl,liodn",
+				&tbl[i].id[0],
+				sizeof(u32) * tbl[i].num_ids);
+			if (off > 0)
+				printf("WARNING unable to set fsl,liodn for "
+					"fsl,srio port %d: %s\n",
+					portid, fdt_strerror(off));
+		} else {
+			debug("WARNING: couldn't set fsl,liodn for srio: %s.\n",
+				fdt_strerror(off));
+		}
+	}
 }
 
 static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
@@ -195,6 +277,8 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
 
 void fdt_fixup_liodn(void *blob)
 {
+	fdt_fixup_srio_liodn(blob, srio_liodn_tbl);
+
 	fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz);
 #ifdef CONFIG_SYS_DPAA_FMAN
 	fdt_fixup_liodn_tbl(blob, fman1_liodn_tbl, fman1_liodn_tbl_sz);
@@ -207,4 +291,8 @@ void fdt_fixup_liodn(void *blob)
 #ifdef CONFIG_SYS_FSL_RAID_ENGINE
 	fdt_fixup_liodn_tbl(blob, raide_liodn_tbl, raide_liodn_tbl_sz);
 #endif
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+	fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
+#endif
 }

arch/powerpc/cpu/mpc85xx/p2041_ids.c

@@ -40,6 +40,12 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 };
 #endif
 
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_2(1, 199, 200),
+	SET_SRIO_LIODN_2(2, 201, 202),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
 struct liodn_id_table liodn_tbl[] = {
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	SET_QMAN_LIODN(31),
@@ -98,6 +104,17 @@ struct liodn_id_table sec_liodn_tbl[] = {
 };
 int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
 
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 6),
+	SET_RMAN_LIODN(1, 7),
+	SET_RMAN_LIODN(2, 8),
+	SET_RMAN_LIODN(3, 9),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
 struct liodn_id_table liodn_bases[] = {
 	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(64, 100),
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -106,4 +123,7 @@ struct liodn_id_table liodn_bases[] = {
 #ifdef CONFIG_SYS_DPAA_PME
 	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(136, 172),
 #endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(80),
+#endif
 };

arch/powerpc/cpu/mpc85xx/p3041_ids.c

@@ -40,6 +40,12 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 };
 #endif
 
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_2(1, 199, 200),
+	SET_SRIO_LIODN_2(2, 201, 202),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
 struct liodn_id_table liodn_tbl[] = {
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	SET_QMAN_LIODN(31),
@@ -97,6 +103,17 @@ struct liodn_id_table sec_liodn_tbl[] = {
 };
 int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
 
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 6),
+	SET_RMAN_LIODN(1, 7),
+	SET_RMAN_LIODN(2, 8),
+	SET_RMAN_LIODN(3, 9),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
 struct liodn_id_table liodn_bases[] = {
 	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(64, 100),
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -105,4 +122,7 @@ struct liodn_id_table liodn_bases[] = {
 #ifdef CONFIG_SYS_DPAA_PME
 	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(136, 172),
 #endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(80),
+#endif
 };

arch/powerpc/cpu/mpc85xx/p3060_ids.c

@@ -40,6 +40,12 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 };
 #endif
 
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_1(1, 198),
+	SET_SRIO_LIODN_1(2, 199),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
 struct liodn_id_table liodn_tbl[] = {
 	SET_USB_LIODN(1, "fsl-usb2-mph", 127),
 	SET_USB_LIODN(2, "fsl-usb2-dr", 157),
@@ -50,9 +56,7 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_DMA_LIODN(1, 196),
 	SET_DMA_LIODN(2, 197),
 
-	SET_GUTS_LIODN("fsl,rapidio-delta", 198, rio1liodnr, 0),
-	SET_GUTS_LIODN(NULL, 199, rio2liodnr, 0),
-	SET_GUTS_LIODN(NULL, 200, rmuliodnr, 0),
+	SET_GUTS_LIODN("fsl,srio-rmu", 200, rmuliodnr, 0xd3000),
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	SET_QMAN_LIODN(31),

arch/powerpc/cpu/mpc85xx/p4080_ids.c

@@ -40,6 +40,12 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 };
 #endif
 
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_1(1, 198),
+	SET_SRIO_LIODN_1(2, 199),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
 struct liodn_id_table liodn_tbl[] = {
 	SET_USB_LIODN(1, "fsl-usb2-mph", 127),
 	SET_USB_LIODN(2, "fsl-usb2-dr", 157),
@@ -53,9 +59,7 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_DMA_LIODN(1, 196),
 	SET_DMA_LIODN(2, 197),
 
-	SET_GUTS_LIODN("fsl,rapidio-delta", 198, rio1liodnr, 0),
-	SET_GUTS_LIODN(NULL, 199, rio2liodnr, 0),
-	SET_GUTS_LIODN(NULL, 200, rmuliodnr, 0),
+	SET_GUTS_LIODN("fsl,srio-rmu", 200, rmuliodnr, 0xd3000),
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	SET_QMAN_LIODN(31),

arch/powerpc/cpu/mpc85xx/p5020_ids.c

@@ -40,6 +40,12 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 };
 #endif
 
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_2(1, 199, 200),
+	SET_SRIO_LIODN_2(2, 201, 202),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
 struct liodn_id_table liodn_tbl[] = {
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	SET_QMAN_LIODN(31),
@@ -107,6 +113,17 @@ struct liodn_id_table raide_liodn_tbl[] = {
 int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
 #endif
 
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 6),
+	SET_RMAN_LIODN(1, 7),
+	SET_RMAN_LIODN(2, 8),
+	SET_RMAN_LIODN(3, 9),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
 struct liodn_id_table liodn_bases[] = {
 	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(64, 100),
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -118,4 +135,7 @@ struct liodn_id_table liodn_bases[] = {
 #ifdef CONFIG_SYS_FSL_RAID_ENGINE
 	[FSL_HW_PORTAL_RAID_ENGINE]  = SET_LIODN_BASE_1(47),
 #endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(80),
+#endif
 };

arch/powerpc/cpu/mpc85xx/portals.c

@@ -245,6 +245,12 @@ void fdt_fixup_qportals(void *blob)
 				goto err;
 		}
 #endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+		err = fdt_qportal(blob, off, i, "rman@0",
+				  FSL_HW_PORTAL_RMAN, 1);
+		if (err < 0)
+			goto err;
+#endif
 
 err:
 		if (err < 0) {

arch/powerpc/cpu/mpc8xxx/fdt.c

@@ -275,21 +275,73 @@ int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
 }
 
 #ifdef CONFIG_SYS_SRIO
+static inline void ft_disable_srio_port(void *blob, int srio_off, int port)
+{
+	int off = fdt_node_offset_by_prop_value(blob, srio_off,
+			"cell-index", &port, 4);
+	if (off >= 0) {
+		off = fdt_setprop_string(blob, off, "status", "disabled");
+		if (off > 0)
+			printf("WARNING unable to set status for fsl,srio "
+				"port %d: %s\n", port, fdt_strerror(off));
+	}
+}
+
+static inline void ft_disable_rman(void *blob)
+{
+	int off = fdt_node_offset_by_compatible(blob, -1, "fsl,rman");
+	if (off >= 0) {
+		off = fdt_setprop_string(blob, off, "status", "disabled");
+		if (off > 0)
+			printf("WARNING unable to set status for fsl,rman %s\n",
+				fdt_strerror(off));
+	}
+}
+
+static inline void ft_disable_rmu(void *blob)
+{
+	int off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio-rmu");
+	if (off >= 0) {
+		off = fdt_setprop_string(blob, off, "status", "disabled");
+		if (off > 0)
+			printf("WARNING unable to set status for "
+				"fsl,srio-rmu %s\n", fdt_strerror(off));
+	}
+}
+
 void ft_srio_setup(void *blob)
 {
+	int srio1_used = 0, srio2_used = 0;
+	int srio_off;
+
+	/* search for srio node, if doesn't exist just return - nothing todo */
+	srio_off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio");
+	if (srio_off < 0)
+		return ;
+
 #ifdef CONFIG_SRIO1
-	if (!is_serdes_configured(SRIO1)) {
-		fdt_del_node_and_alias(blob, "rio0");
-	}
-#else
-	fdt_del_node_and_alias(blob, "rio0");
+	if (is_serdes_configured(SRIO1))
+		srio1_used = 1;
 #endif
 #ifdef CONFIG_SRIO2
-	if (!is_serdes_configured(SRIO2)) {
-		fdt_del_node_and_alias(blob, "rio1");
-	}
-#else
-	fdt_del_node_and_alias(blob, "rio1");
+	if (is_serdes_configured(SRIO2))
+		srio2_used = 1;
 #endif
+
+	/* mark port1 disabled */
+	if (!srio1_used)
+		ft_disable_srio_port(blob, srio_off, 1);
+
+	/* mark port2 disabled */
+	if (!srio2_used)
+		ft_disable_srio_port(blob, srio_off, 2);
+
+	/* if both ports not used, disable controller, rmu and rman */
+	if (!srio1_used && !srio2_used) {
+		fdt_setprop_string(blob, srio_off, "status", "disabled");
+
+		ft_disable_rman(blob);
+		ft_disable_rmu(blob);
+	}
 }
 #endif

arch/powerpc/include/asm/fsl_liodn.h

@@ -25,6 +25,26 @@
 
 #include <asm/types.h>
 
+struct srio_liodn_id_table {
+	u32 id[2];
+	unsigned long reg_offset[2];
+	u8 num_ids;
+	u8 portid;
+};
+#define SET_SRIO_LIODN_1(port, idA) \
+	{ .id = { idA }, .num_ids = 1, .portid = port, \
+	  .reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
+		+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
+	}
+
+#define SET_SRIO_LIODN_2(port, idA, idB) \
+	{ .id = { idA, idB }, .num_ids = 2, .portid = port, \
+	  .reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
+		+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
+	  .reg_offset[1] = offsetof(ccsr_gur_t, rio##port##maintliodnr) \
+		+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
+	}
+
 struct liodn_id_table {
 	const char * compat;
 	u32 id[2];
@@ -155,10 +175,20 @@ extern void fdt_fixup_liodn(void *blob);
 	offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg0) + \
 	CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)
 
+#define SET_RMAN_LIODN(ibNum, liodn) \
+	SET_LIODN_ENTRY_1("fsl,rman-inbound-block", liodn, \
+		offsetof(struct ccsr_rman, mmitdr) + \
+		CONFIG_SYS_FSL_CORENET_RMAN_OFFSET, \
+		CONFIG_SYS_FSL_CORENET_RMAN_OFFSET + ibNum * 0x1000)
+
 extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
 extern struct liodn_id_table raide_liodn_tbl[];
 extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
+extern struct srio_liodn_id_table srio_liodn_tbl[];
+extern struct liodn_id_table rman_liodn_tbl[];
 extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
 extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
+extern int srio_liodn_tbl_sz;
+extern int rman_liodn_tbl_sz;
 
 #endif

arch/powerpc/include/asm/fsl_portals.h

@@ -38,6 +38,10 @@ enum fsl_dpaa_dev {
 #ifdef CONFIG_SYS_FSL_RAID_ENGINE
 	FSL_HW_PORTAL_RAID_ENGINE,
 #endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	FSL_HW_PORTAL_RMAN,
+#endif
+
 };
 
 struct qportal_info {

arch/powerpc/include/asm/immap_85xx.h

@@ -2339,6 +2339,16 @@ struct ccsr_raide {
 };
 #endif
 
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct ccsr_rman {
+	u8	res0[0xf64];
+	u32	mmliodnbr;	/* Message Manager LIODN Base Register */
+	u32	mmitar;		/* RMAN Inbound Translation Address Register */
+	u32	mmitdr;		/* RMAN Inbound Translation Data Register */
+	u8	res4[0x1f090];
+};
+#endif
+
 #ifdef CONFIG_FSL_CORENET
 #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET	0x0000
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
@@ -2354,6 +2364,7 @@ struct ccsr_raide {
 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET		0x114000
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0x130000
+#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET	0x1e0000
 #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET		0x200000
 #define CONFIG_SYS_MPC85xx_PCIE2_OFFSET		0x201000
 #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET		0x202000
@@ -2442,6 +2453,8 @@ struct ccsr_raide {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET)
 #define CONFIG_SYS_FSL_RAID_ENGINE_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_RMAN_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RMAN_OFFSET)
 #define CONFIG_SYS_MPC85xx_GUTS_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
 #define CONFIG_SYS_FSL_CORENET_CCM_ADDR \

arch/powerpc/include/asm/mpc85xx_gpio.h

@@ -0,0 +1,123 @@
+/*
+ * Copyright 2010 eXMeritus, A Boeing Company
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef POWERPC_ASM_MPC85XX_GPIO_H_
+#define POWERPC_ASM_MPC85XX_GPIO_H_
+
+# include <asm/immap_85xx.h>
+
+/*
+ * The following internal functions are an MPC85XX-specific GPIO API which
+ * allows setting and querying multiple GPIOs in a single operation.
+ *
+ * All of these look relatively large, but the arguments are almost always
+ * constants, so they compile down to just a few instructions and a
+ * memory-mapped IO operation or two.
+ */
+static inline void mpc85xx_gpio_set(unsigned int mask,
+		unsigned int dir, unsigned int val)
+{
+	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00);
+
+	/* First mask off the unwanted parts of "dir" and "val" */
+	dir &= mask;
+	val &= mask;
+
+	/* Now read in the values we're supposed to preserve */
+	dir |= (in_be32(&gpio->gpdir) & ~mask);
+	val |= (in_be32(&gpio->gpdat) & ~mask);
+
+	/*
+	 * Poke the new output values first, then set the direction.  This
+	 * helps to avoid transient data when switching from input to output
+	 * and vice versa.
+	 */
+	out_be32(&gpio->gpdat, val);
+	out_be32(&gpio->gpdir, dir);
+}
+
+static inline void mpc85xx_gpio_set_in(unsigned int gpios)
+{
+	mpc85xx_gpio_set(gpios, 0x00000000, 0x00000000);
+}
+
+static inline void mpc85xx_gpio_set_low(unsigned int gpios)
+{
+	mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0x00000000);
+}
+
+static inline void mpc85xx_gpio_set_high(unsigned int gpios)
+{
+	mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0xFFFFFFFF);
+}
+
+static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
+{
+	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00);
+
+	/* Read the requested values */
+	return in_be32(&gpio->gpdat) & mask;
+}
+
+/*
+ * These implement the generic Linux GPIO API on top of the other functions
+ * in this header.
+ */
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Compatibility shim */
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	/* Compatibility shim */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	mpc85xx_gpio_set_in(1U << gpio);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	mpc85xx_gpio_set_low(1U << gpio);
+	return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return !!mpc85xx_gpio_get(1U << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (value)
+		mpc85xx_gpio_set_high(1U << gpio);
+	else
+		mpc85xx_gpio_set_low(1U << gpio);
+}
+
+static inline int gpio_is_valid(int gpio)
+{
+	return (gpio >= 0) && (gpio < 32);
+}
+
+#endif /* not POWERPC_ASM_MPC85XX_GPIO_H_ */

board/freescale/corenet_ds/eth_hydra.c

@@ -70,6 +70,7 @@
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
+#include <fdt_support.h>
 #include <asm/fsl_dtsec.h>
 
 #include "../common/ngpixis.h"
@@ -199,25 +200,6 @@ static int hydra_mdio_init(char *realbusname, char *fakebusname)
 	return mdio_register(bus);
 }
 
-/*
- * Given an alias or a path for a node, set the status of that node.
- *
- * If 'alias' is not a valid alias, then it is treated as a full path to the
- * node.  No error checking is performed.
- *
- * This function is normally called to set the status for a virtual MDIO node.
- */
-static void fdt_set_node_status(void *fdt, const char *alias,
-				const char *status)
-{
-	const char *path = fdt_get_alias(fdt, alias);
-
-	if (!path)
-		path = alias;
-
-	do_fixup_by_path(fdt, path, "status", status, strlen(status) + 1, 1);
-}
-
 /*
  * Given an alias or a path for a node, set the mux value of that node.
  *
@@ -372,14 +354,14 @@ void fdt_fixup_board_enet(void *fdt)
 		case PHY_INTERFACE_MODE_SGMII:
 			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
 			if (lane >= 0) {
-				fdt_set_node_status(fdt, "emi1_sgmii", "okay");
+				fdt_status_okay_by_alias(fdt, "emi1_sgmii");
 				/* Also set the MUX value */
 				fdt_set_mdio_mux(fdt, "emi1_sgmii",
 						 mdio_mux[i].val);
 			}
 			break;
 		case PHY_INTERFACE_MODE_RGMII:
-			fdt_set_node_status(fdt, "emi1_rgmii", "okay");
+			fdt_status_okay_by_alias(fdt, "emi1_rgmii");
 			break;
 		default:
 			break;
@@ -388,7 +370,7 @@ void fdt_fixup_board_enet(void *fdt)
 
 	lane = serdes_get_first_lane(XAUI_FM1);
 	if (lane >= 0)
-		fdt_set_node_status(fdt, "emi2_xgmii", "okay");
+		fdt_status_okay_by_alias(fdt, "emi2_xgmii");
 #endif
 }
 

board/freescale/corenet_ds/eth_p4080.c

@@ -93,21 +93,43 @@ struct mii_dev *mii_dev_for_muxval(u32 muxval)
 	return bus;
 }
 
-#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
+#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) && defined(CONFIG_PHY_TERANETICS)
 int board_phy_config(struct phy_device *phydev)
 {
-	/*
-	 * If this is the 10G PHY, and we switched it to fiber,
-	 * we need to reset the serdes link for SERDES9
-	 */
-	if ((phydev->port == PORT_FIBRE) && (phydev->drv->uid == 0x00a19410)) {
+	if (phydev->drv->uid == PHY_UID_TN2020) {
+		unsigned long timeout = 1 * 1000; /* 1 seconds */
 		enum srds_prtcl device;
 
+		/*
+		 * Wait for the XAUI to come out of reset.  This is when it
+		 * starts transmitting alignment signals.
+		 */
+		while (--timeout) {
+			int reg = phy_read(phydev, MDIO_MMD_PHYXS, MDIO_CTRL1);
+			if (reg < 0) {
+				printf("TN2020: Error reading from PHY at "
+				       "address %u\n", phydev->addr);
+				break;
+			}
+			/*
+			 * Note that we've never actually seen
+			 * MDIO_CTRL1_RESET set to 1.
+			 */
+			if ((reg & MDIO_CTRL1_RESET) == 0)
+				break;
+			udelay(1000);
+		}
+
+		if (!timeout) {
+			printf("TN2020: Timeout waiting for PHY at address %u "
+			       " to reset.\n", phydev->addr);
+		}
+
 		switch (phydev->addr) {
-		case 4:
+		case CONFIG_SYS_FM1_10GEC1_PHY_ADDR:
 			device = XAUI_FM1;
 			break;
-		case 0:
+		case CONFIG_SYS_FM2_10GEC1_PHY_ADDR:
 			device = XAUI_FM2;
 			break;
 		default:
@@ -199,22 +221,6 @@ static int p4080ds_mdio_init(char *realbusname, u32 muxval)
 	return mdio_register(bus);
 }
 
-/*
- * Sets the specified node's status to the value contained in "status"
- * If the first character of the specified path is "/" then we use
- * alias as a path.  Otherwise, we look for an alias of that name
- */
-static void fdt_set_node_status(void *fdt, const char *alias,
-			const char *status)
-{
-	const char *path = fdt_get_alias(fdt, alias);
-
-	if (!path)
-		path = alias;
-
-	do_fixup_by_path(fdt, path, "status", status, strlen(status) + 1, 1);
-}
-
 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
 				enum fm_port port, int offset)
 {
@@ -255,28 +261,28 @@ void fdt_fixup_board_enet(void *fdt)
 	 */
 
 	/* We've got six MDIO nodes that may or may not need to exist */
-	fdt_set_node_status(fdt, "emi1_slot3", "disabled");
-	fdt_set_node_status(fdt, "emi1_slot4", "disabled");
-	fdt_set_node_status(fdt, "emi1_slot5", "disabled");
-	fdt_set_node_status(fdt, "emi2_slot4", "disabled");
-	fdt_set_node_status(fdt, "emi2_slot5", "disabled");
+	fdt_status_disabled_by_alias(fdt, "emi1_slot3");
+	fdt_status_disabled_by_alias(fdt, "emi1_slot4");
+	fdt_status_disabled_by_alias(fdt, "emi1_slot5");
+	fdt_status_disabled_by_alias(fdt, "emi2_slot4");
+	fdt_status_disabled_by_alias(fdt, "emi2_slot5");
 
 	for (i = 0; i < NUM_FM_PORTS; i++) {
 		switch (mdio_mux[i]) {
 		case EMI1_SLOT3:
-			fdt_set_node_status(fdt, "emi1_slot3", "okay");
+			fdt_status_okay_by_alias(fdt, "emi1_slot3");
 			break;
 		case EMI1_SLOT4:
-			fdt_set_node_status(fdt, "emi1_slot4", "okay");
+			fdt_status_okay_by_alias(fdt, "emi1_slot4");
 			break;
 		case EMI1_SLOT5:
-			fdt_set_node_status(fdt, "emi1_slot5", "okay");
+			fdt_status_okay_by_alias(fdt, "emi1_slot5");
 			break;
 		case EMI2_SLOT4:
-			fdt_set_node_status(fdt, "emi2_slot4", "okay");
+			fdt_status_okay_by_alias(fdt, "emi2_slot4");
 			break;
 		case EMI2_SLOT5:
-			fdt_set_node_status(fdt, "emi2_slot5", "okay");
+			fdt_status_okay_by_alias(fdt, "emi2_slot5");
 			break;
 		}
 	}

board/freescale/p2020ds/ddr.c

@@ -57,6 +57,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 {
 	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
 	ulong ddr_freq;
+	int i;
 
 	if (ctrl_num) {
 		printf("Wrong parameter for controller number %d", ctrl_num);
@@ -65,6 +66,17 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	if (!pdimm->n_ranks)
 		return;
 
+	/*
+	 * set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
+	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
+	 */
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		popts->cs_local_opts[i].odt_rd_cfg = 0;
+		popts->cs_local_opts[i].odt_wr_cfg = 1;
+	}
+
 	pbsp = dimm0;
 
 	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr

common/fdt_support.c

@@ -2,7 +2,7 @@
  * (C) Copyright 2007
  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
  *
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -1259,6 +1259,64 @@ unsigned int fdt_create_phandle(void *fdt, int nodeoffset)
 	return phandle;
 }
 
+/*
+ * fdt_set_node_status: Set status for the given node
+ *
+ * @fdt: ptr to device tree
+ * @nodeoffset: node to update
+ * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED,
+ *	    FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE
+ * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE
+ */
+int fdt_set_node_status(void *fdt, int nodeoffset,
+			enum fdt_status status, unsigned int error_code)
+{
+	char buf[16];
+	int ret = 0;
+
+	if (nodeoffset < 0)
+		return nodeoffset;
+
+	switch (status) {
+	case FDT_STATUS_OKAY:
+		ret = fdt_setprop_string(fdt, nodeoffset, "status", "okay");
+		break;
+	case FDT_STATUS_DISABLED:
+		ret = fdt_setprop_string(fdt, nodeoffset, "status", "disabled");
+		break;
+	case FDT_STATUS_FAIL:
+		ret = fdt_setprop_string(fdt, nodeoffset, "status", "fail");
+		break;
+	case FDT_STATUS_FAIL_ERROR_CODE:
+		sprintf(buf, "fail-%d", error_code);
+		ret = fdt_setprop_string(fdt, nodeoffset, "status", buf);
+		break;
+	default:
+		printf("Invalid fdt status: %x\n", status);
+		ret = -1;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * fdt_set_status_by_alias: Set status for the given node given an alias
+ *
+ * @fdt: ptr to device tree
+ * @alias: alias of node to update
+ * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED,
+ *	    FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE
+ * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE
+ */
+int fdt_set_status_by_alias(void *fdt, const char* alias,
+			    enum fdt_status status, unsigned int error_code)
+{
+	int offset = fdt_path_offset(fdt, alias);
+
+	return fdt_set_node_status(fdt, offset, status, error_code);
+}
+
 #if defined(CONFIG_VIDEO)
 int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
 {

drivers/net/fm/init.c

@@ -183,6 +183,8 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 {
 	int off, ph;
 	phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
+	u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
+				CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
 
 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
 
@@ -195,9 +197,13 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 	/* board code might have caused offset to change */
 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
 
-	/* disable both the mac node and the node that has a handle to it */
-	fdt_setprop_string(blob, off, "status", "disabled");
+	/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
+	if (paddr != dtsec1_addr) {
+		/* disable the mac node */
+		fdt_setprop_string(blob, off, "status", "disabled");
+	}
 
+	/* disable the node point to the mac */
 	ph = fdt_get_phandle(blob, off);
 	do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
 		"status", "disabled", strlen("disabled") + 1, 1);

drivers/net/fm/p1023.c

@@ -39,6 +39,11 @@ static int is_device_disabled(enum fm_port port)
 void fman_disable_port(enum fm_port port)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* don't allow disabling of DTSEC1 as its needed for MDIO */
+	if (port == FM1_DTSEC1)
+		return;
+
 	setbits_be32(&gur->devdisr, port_to_devdisr[port]);
 }
 

drivers/net/fm/p3060.c

@@ -45,6 +45,11 @@ static int is_device_disabled(enum fm_port port)
 void fman_disable_port(enum fm_port port)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* don't allow disabling of DTSEC1 as its needed for MDIO */
+	if (port == FM1_DTSEC1)
+		return;
+
 	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
 }
 

drivers/net/fm/p4080.c

@@ -47,6 +47,11 @@ static int is_device_disabled(enum fm_port port)
 void fman_disable_port(enum fm_port port)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* don't allow disabling of DTSEC1 as its needed for MDIO */
+	if (port == FM1_DTSEC1)
+		return;
+
 	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
 }
 

drivers/net/fm/p5020.c

@@ -43,6 +43,11 @@ static int is_device_disabled(enum fm_port port)
 void fman_disable_port(enum fm_port port)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* don't allow disabling of DTSEC1 as its needed for MDIO */
+	if (port == FM1_DTSEC1)
+		return;
+
 	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
 }
 

drivers/net/phy/teranetics.c

@@ -95,7 +95,7 @@ int tn2020_startup(struct phy_device *phydev)
 
 struct phy_driver tn2020_driver = {
 	.name = "Teranetics TN2020",
-	.uid = 0x00a19410,
+	.uid = PHY_UID_TN2020,
 	.mask = 0xfffffff0,
 	.features = PHY_10G_FEATURES,
 	.mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |

include/configs/P2041RDB.h

@@ -66,6 +66,7 @@
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1			/* SRIO port 1 */
 #define CONFIG_SRIO2			/* SRIO port 2 */
+#define CONFIG_SYS_DPAA_RMAN		/* RMan */
 
 #define CONFIG_FSL_LAW			/* Use common FSL init code */
 

include/configs/P3041DS.h

@@ -35,6 +35,7 @@
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE3
 #define CONFIG_PCIE4
+#define CONFIG_SYS_DPAA_RMAN
 
 #define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
 

include/configs/P5020DS.h

@@ -36,6 +36,7 @@
 #define CONFIG_PCIE3
 #define CONFIG_PCIE4
 #define CONFIG_SYS_FSL_RAID_ENGINE
+#define CONFIG_SYS_DPAA_RMAN
 
 #define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
 

include/fdt_support.h

@@ -104,5 +104,33 @@ int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
 			      u64 addr);
 u64 fdt_get_base_address(void *fdt, int node);
 
+enum fdt_status {
+	FDT_STATUS_OKAY,
+	FDT_STATUS_DISABLED,
+	FDT_STATUS_FAIL,
+	FDT_STATUS_FAIL_ERROR_CODE,
+};
+int fdt_set_node_status(void *fdt, int nodeoffset,
+			enum fdt_status status, unsigned int error_code);
+static inline int fdt_status_okay(void *fdt, int nodeoffset)
+{
+	return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
+}
+static inline int fdt_status_disabled(void *fdt, int nodeoffset)
+{
+	return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
+}
+
+int fdt_set_status_by_alias(void *fdt, const char* alias,
+			    enum fdt_status status, unsigned int error_code);
+static inline int fdt_status_okay_by_alias(void *fdt, const char* alias)
+{
+	return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
+}
+static inline int fdt_status_disabled_by_alias(void *fdt, const char* alias)
+{
+	return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
+}
+
 #endif /* ifdef CONFIG_OF_LIBFDT */
 #endif /* ifndef __FDT_SUPPORT_H */

include/phy.h

@@ -226,4 +226,8 @@ int phy_natsemi_init(void);
 int phy_realtek_init(void);
 int phy_teranetics_init(void);
 int phy_vitesse_init(void);
+
+/* PHY UIDs for various PHYs that are referenced in external code */
+#define PHY_UID_TN2020	0x00a19410
+
 #endif