pci_ftpci100: Implementation FTPCI100 PCI driver

FTPCI100 is a SoC PCI componenet of Faraday company.
Which is usually built into SoC chips for providing
embedded PCI functions.

Signed-off-by: Gavin Guo <gavinguo@andestech.com>
Signed-off-by: Macpaul Lin <macpaul@andestech.com>

drivers/pci/Makefile

@@ -27,6 +27,7 @@ LIB	:= $(obj)libpci.o
 
 COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
 COBJS-$(CONFIG_PCI) += pci.o pci_auto.o pci_indirect.o
+COBJS-$(CONFIG_FTPCI100) += pci_ftpci100.o
 COBJS-$(CONFIG_IXP_PCI) += pci_ixp.o
 COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o
 COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o

drivers/pci/pci_ftpci100.c

@@ -0,0 +1,330 @@
+/*
+ * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <pci.h>
+
+#include <asm/io.h>
+#include <asm/types.h> /* u32, u16.... used by pci.h */
+
+#include "pci_ftpci100.h"
+
+struct ftpci100_data {
+	unsigned int reg_base;
+	unsigned int io_base;
+	unsigned int mem_base;
+	unsigned int mmio_base;
+	unsigned int ndevs;
+};
+
+static struct pci_config devs[FTPCI100_MAX_FUNCTIONS];
+static struct pci_controller local_hose;
+
+static void setup_pci_bar(unsigned int bus, unsigned int dev, unsigned func,
+		unsigned char header, struct ftpci100_data *priv)
+{
+	struct pci_controller *hose = (struct pci_controller *)&local_hose;
+	unsigned int i, tmp32, bar_no, iovsmem = 1;
+	pci_dev_t dev_nu;
+
+	/* A device is present, add an entry to the array */
+	devs[priv->ndevs].bus = bus;
+	devs[priv->ndevs].dev = dev;
+	devs[priv->ndevs].func = func;
+
+	dev_nu = PCI_BDF(bus, dev, func);
+
+	if ((header & 0x7f) == 0x01)
+		/* PCI-PCI Bridge */
+		bar_no = 2;
+	else
+		bar_no = 6;
+
+	/* Allocate address spaces by configuring BARs */
+	for (i = 0; i < bar_no; i++) {
+		pci_hose_write_config_dword(hose, dev_nu,
+					PCI_BASE_ADDRESS_0 + i * 4, 0xffffffff);
+		pci_hose_read_config_dword(hose, dev_nu,
+					PCI_BASE_ADDRESS_0 + i * 4, &tmp32);
+
+		if (tmp32 == 0x0)
+			continue;
+
+		/* IO space */
+		if (tmp32 & 0x1) {
+			iovsmem = 0;
+			unsigned int size_mask = ~(tmp32 & 0xfffffffc);
+
+			if (priv->io_base & size_mask)
+				priv->io_base = (priv->io_base & ~size_mask) + \
+						 size_mask + 1;
+
+			devs[priv->ndevs].bar[i].addr = priv->io_base;
+			devs[priv->ndevs].bar[i].size = size_mask + 1;
+
+			pci_hose_write_config_dword(hose, dev_nu,
+					PCI_BASE_ADDRESS_0 + i * 4,
+					priv->io_base);
+
+			debug("Allocated IO address 0x%X-" \
+				"0x%X for Bus %d, Device %d, Function %d\n",
+				priv->io_base,
+				priv->io_base + size_mask, bus, dev, func);
+
+			priv->io_base += size_mask + 1;
+		} else {
+			/* Memory space */
+			unsigned int is_64bit = ((tmp32 & 0x6) == 0x4);
+			unsigned int is_pref = tmp32 & 0x8;
+			unsigned int size_mask = ~(tmp32 & 0xfffffff0);
+			unsigned int alloc_base;
+			unsigned int *addr_mem_base;
+
+			if (is_pref)
+				addr_mem_base = &priv->mem_base;
+			else
+				addr_mem_base = &priv->mmio_base;
+
+			alloc_base = *addr_mem_base;
+
+			if (alloc_base & size_mask)
+				alloc_base = (alloc_base & ~size_mask) \
+						+ size_mask + 1;
+
+			pci_hose_write_config_dword(hose, dev_nu,
+					PCI_BASE_ADDRESS_0 + i * 4, alloc_base);
+
+			debug("Allocated %s address 0x%X-" \
+				"0x%X for Bus %d, Device %d, Function %d\n",
+				is_pref ? "MEM" : "MMIO", alloc_base,
+				alloc_base + size_mask, bus, dev, func);
+
+			devs[priv->ndevs].bar[i].addr = alloc_base;
+			devs[priv->ndevs].bar[i].size = size_mask + 1;
+
+			debug("BAR address  BAR size\n");
+			debug("%010x  %08d\n",
+				devs[priv->ndevs].bar[0].addr,
+				devs[priv->ndevs].bar[0].size);
+
+			alloc_base += size_mask + 1;
+			*addr_mem_base = alloc_base;
+
+			if (is_64bit) {
+				i++;
+				pci_hose_write_config_dword(hose, dev_nu,
+					PCI_BASE_ADDRESS_0 + i * 4, 0x0);
+			}
+		}
+	}
+
+	/* Enable Bus Master, Memory Space, and IO Space */
+	pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32);
+	pci_hose_write_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, 0x08);
+	pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32);
+
+	pci_hose_read_config_dword(hose, dev_nu, PCI_COMMAND, &tmp32);
+
+	tmp32 &= 0xffff;
+
+	if (iovsmem == 0)
+		tmp32 |= 0x5;
+	else
+		tmp32 |= 0x6;
+
+	pci_hose_write_config_dword(hose, dev_nu, PCI_COMMAND, tmp32);
+}
+
+static void pci_bus_scan(struct ftpci100_data *priv)
+{
+	struct pci_controller *hose = (struct pci_controller *)&local_hose;
+	unsigned int bus, dev, func;
+	pci_dev_t dev_nu;
+	unsigned int data32;
+	unsigned int tmp;
+	unsigned char header;
+	unsigned char int_pin;
+	unsigned int niobars;
+	unsigned int nmbars;
+
+	priv->ndevs = 1;
+
+	nmbars = 0;
+	niobars = 0;
+
+	for (bus = 0; bus < MAX_BUS_NUM; bus++)
+		for (dev = 0; dev < MAX_DEV_NUM; dev++)
+			for (func = 0; func < MAX_FUN_NUM; func++) {
+				dev_nu = PCI_BDF(bus, dev, func);
+				pci_hose_read_config_dword(hose, dev_nu,
+							PCI_VENDOR_ID, &data32);
+
+				/*
+				 * some broken boards return 0 or ~0,
+				 * if a slot is empty.
+				 */
+				if (data32 == 0xffffffff ||
+					data32 == 0x00000000 ||
+					data32 == 0x0000ffff ||
+					data32 == 0xffff0000)
+					continue;
+
+				pci_hose_read_config_dword(hose, dev_nu,
+							PCI_HEADER_TYPE, &tmp);
+				header = (unsigned char)tmp;
+				setup_pci_bar(bus, dev, func, header, priv);
+
+				devs[priv->ndevs].v_id = (u16)(data32 & \
+								0x0000ffff);
+
+				devs[priv->ndevs].d_id = (u16)((data32 & \
+							0xffff0000) >> 16);
+
+				/* Figure out what INTX# line the card uses */
+				pci_hose_read_config_byte(hose, dev_nu,
+						PCI_INTERRUPT_PIN, &int_pin);
+
+				/* assign the appropriate irq line */
+				if (int_pin > PCI_IRQ_LINES) {
+					printf("more irq lines than expect\n");
+				} else if (int_pin != 0) {
+					/* This device uses an interrupt line */
+					devs[priv->ndevs].pin = int_pin;
+				}
+
+				pci_hose_read_config_dword(hose, dev_nu,
+						PCI_CLASS_DEVICE, &data32);
+
+				debug("%06d  %03d  %03d  " \
+					"%04d  %08x  %08x  " \
+					"%03d  %08x  %06d  %08x\n",
+					priv->ndevs, devs[priv->ndevs].bus,
+					devs[priv->ndevs].dev,
+					devs[priv->ndevs].func,
+					devs[priv->ndevs].d_id,
+					devs[priv->ndevs].v_id,
+					devs[priv->ndevs].pin,
+					devs[priv->ndevs].bar[0].addr,
+					devs[priv->ndevs].bar[0].size,
+					data32 >> 8);
+
+				priv->ndevs++;
+			}
+}
+
+static void ftpci_preinit(struct ftpci100_data *priv)
+{
+	struct ftpci100_ahbc *ftpci100;
+	struct pci_controller *hose = (struct pci_controller *)&local_hose;
+	u32 pci_config_addr;
+	u32 pci_config_data;
+
+	priv->reg_base = CONFIG_FTPCI100_BASE;
+	priv->io_base = CONFIG_FTPCI100_BASE + CONFIG_FTPCI100_IO_SIZE;
+	priv->mmio_base = CONFIG_FTPCI100_MEM_BASE;
+	priv->mem_base = CONFIG_FTPCI100_MEM_BASE + CONFIG_FTPCI100_MEM_SIZE;
+
+	ftpci100 = (struct ftpci100_ahbc *)priv->reg_base;
+
+	pci_config_addr = (u32) &ftpci100->conf;
+	pci_config_data = (u32) &ftpci100->data;
+
+	/* print device name */
+	printf("FTPCI100\n");
+
+	/* dump basic configuration */
+	debug("%s: Config addr is %08X, data port is %08X\n",
+		__func__, pci_config_addr, pci_config_data);
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + 0,
+		CONFIG_PCI_MEM_BUS,
+		CONFIG_PCI_MEM_PHYS,
+		CONFIG_PCI_MEM_SIZE,
+		PCI_REGION_MEM);
+	hose->region_count++;
+
+	/* PCI IO space */
+	pci_set_region(hose->regions + 1,
+		CONFIG_PCI_IO_BUS,
+		CONFIG_PCI_IO_PHYS,
+		CONFIG_PCI_IO_SIZE,
+		PCI_REGION_IO);
+	hose->region_count++;
+
+#if defined(CONFIG_PCI_SYS_BUS)
+	/* PCI System Memory space */
+	pci_set_region(hose->regions + 2,
+		CONFIG_PCI_SYS_BUS,
+		CONFIG_PCI_SYS_PHYS,
+		CONFIG_PCI_SYS_SIZE,
+		PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+	hose->region_count++;
+#endif
+
+	/* setup indirect read/write function */
+	pci_setup_indirect(hose, pci_config_addr, pci_config_data);
+
+	/* register hose */
+	pci_register_hose(hose);
+}
+
+void pci_ftpci_init(void)
+{
+	struct ftpci100_data *priv = NULL;
+	struct pci_controller *hose = (struct pci_controller *)&local_hose;
+	pci_dev_t bridge_num;
+
+	struct pci_device_id bridge_ids[] = {
+		{FTPCI100_BRIDGE_VENDORID, FTPCI100_BRIDGE_DEVICEID},
+		{0, 0}
+	};
+
+	priv = malloc(sizeof(struct ftpci100_data));
+
+	if (!priv) {
+		printf("%s(): failed to malloc priv\n", __func__);
+		return;
+	}
+
+	memset(priv, 0, sizeof(struct ftpci100_data));
+
+	ftpci_preinit(priv);
+
+	debug("Device  bus  dev  func  deviceID  vendorID  pin  address" \
+		"   size    class\n");
+
+	pci_bus_scan(priv);
+
+	/*
+	 * Setup the PCI Bridge Window to 1GB,
+	 * it will cause USB OHCI Host controller Unrecoverable Error
+	 * if it is not set.
+	 */
+	bridge_num = pci_find_devices(bridge_ids, 0);
+	if (bridge_num == -1) {
+		printf("PCI Bridge not found\n");
+		return;
+	}
+	pci_hose_write_config_dword(hose, bridge_num, PCI_MEM_BASE_SIZE1,
+					FTPCI100_BASE_ADR_SIZE(1024));
+}

drivers/pci/pci_ftpci100.h

@@ -0,0 +1,94 @@
+/*
+ * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
+ *
+ * Copyright (C) 2010 Andes Technology Corporation
+ * Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __FTPCI100_H
+#define __FTPCI100_H
+
+/* AHB Control Registers */
+struct ftpci100_ahbc {
+	unsigned int iosize;		/* 0x00 - I/O Space Size Signal */
+	unsigned int prot;		/* 0x04 - AHB Protection */
+	unsigned int rsved[8];		/* 0x08-0x24 - Reserved */
+	unsigned int conf;		/* 0x28 - PCI Configuration */
+	unsigned int data;		/* 0x2c - PCI Configuration DATA */
+};
+
+/*
+ * FTPCI100_IOSIZE_REG's constant definitions
+ */
+#define FTPCI100_BASE_IO_SIZE(x)	(ffs(x) - 1)	/* 1M - 2048M */
+
+/*
+ * PCI Configuration Register
+ */
+#define PCI_INT_MASK			0x4c
+#define PCI_MEM_BASE_SIZE1		0x50
+#define PCI_MEM_BASE_SIZE2		0x54
+#define PCI_MEM_BASE_SIZE3		0x58
+
+/*
+ * PCI_INT_MASK's bit definitions
+ */
+#define PCI_INTA_ENABLE			(1 << 22)
+#define PCI_INTB_ENABLE			(1 << 23)
+#define PCI_INTC_ENABLE			(1 << 24)
+#define PCI_INTD_ENABLE			(1 << 25)
+
+/*
+ * PCI_MEM_BASE_SIZE1's constant definitions
+ */
+#define FTPCI100_BASE_ADR_SIZE(x)	((ffs(x) - 1) << 16)	/* 1M - 2048M */
+
+#define FTPCI100_MAX_FUNCTIONS		20
+#define PCI_IRQ_LINES			4
+
+#define MAX_BUS_NUM			256
+#define MAX_DEV_NUM			32
+#define MAX_FUN_NUM			8
+
+#define PCI_MAX_BAR_PER_FUNC		6
+
+/*
+ * PCI_MEM_SIZE
+ */
+#define FTPCI100_MEM_SIZE(x)		(ffs(x) << 24)
+
+/* This definition is used by pci_ftpci_init() */
+#define FTPCI100_BRIDGE_VENDORID		0x159b
+#define FTPCI100_BRIDGE_DEVICEID		0x4321
+
+struct pcibar {
+	unsigned int size;
+	unsigned int addr;
+};
+
+struct pci_config {
+	unsigned int bus;
+	unsigned int dev;				/* device */
+	unsigned int func;
+	unsigned int pin;
+	unsigned short v_id;				/* vendor id */
+	unsigned short d_id;				/* device id */
+	struct pcibar bar[PCI_MAX_BAR_PER_FUNC + 1];
+};
+
+#endif