[PATCH] Update AMCC Luan 440SP eval board support

The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
inititializition. This includes DDR auto calibration and support
for different DIMM modules, instead of the fixed setup used in
the earlier version.

This patch also enables the cache in FLASH for the startup
phase of U-Boot (while running from FLASH). After relocating to
SDRAM the cache is disabled again. This will speed up the boot
process, especially the SDRAM setup, since there are some loops
for memory testing (auto calibration).

Signed-off-by: Stefan Roese <sr@denx.de>

board/amcc/luan/init.S

@@ -1,73 +1,31 @@
 /*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
 
 #include <ppc_asm.tmpl>
 #include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
 
 /**************************************************************************
  * TLB TABLE
@@ -80,53 +38,37 @@
  *
  *************************************************************************/
 
-    .section .bootpg,"ax"
-    .globl tlbtab
+	.section .bootpg,"ax"
+	.globl tlbtab
 
 tlbtab:
-    tlbtab_start
-
-#if (CFG_LARGE_FLASH == 0xffc00000)	/* if booting from large flash */
-    /* large flash */
-    tlbentry( 0xffc00000,         SZ_1M, 0xffc00000,          1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-    tlbentry( 0xffd00000,         SZ_1M, 0xffd00000,          1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-    tlbentry( 0xffe00000,         SZ_1M, 0xffe00000,          1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-    tlbentry( 0xfff00000,         SZ_1M, 0xfff00000,          1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-
-    tlbentry( 0xff800000,         SZ_1M, 0xff800000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-    tlbentry( 0xff900000,         SZ_1M, 0xff900000,          1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
-#else					/* else booting from small flash */
-    tlbentry( 0xffe00000,         SZ_1M, 0xffe00000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-    tlbentry( 0xfff00000,         SZ_1M, 0xfff00000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-
-    tlbentry( 0xff800000,         SZ_1M, 0xff800000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-    tlbentry( 0xff900000,         SZ_1M, 0xff900000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-    tlbentry( 0xffa00000,         SZ_1M, 0xffa00000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-    tlbentry( 0xffb00000,         SZ_1M, 0xffb00000,          1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#endif
-
-    tlbentry( CFG_EPLD_BASE,    SZ_256K, 0xff000000,          1, AC_R|AC_W|SA_G|SA_I )
-
-#if (CFG_SRAM_BASE != 0)		/* if SRAM up high and SDRAM at zero */
-    tlbentry( 0x00000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-#elif (CFG_SMALL_FLASH == 0xff900000)	/* else SRAM at 0 */
-    tlbentry( 0x00000000,   SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#elif (CFG_SMALL_FLASH == 0xfff00000)
-    tlbentry( 0x00000000,   SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
-#else
-    #error DONT KNOW SRAM LOCATION
-#endif
-
-    /* internal ram (l2 cache) */
-    tlbentry( CFG_ISRAM_BASE,    SZ_256K, 0x80000000,      0, AC_R|AC_W|AC_X|SA_I )
-
-    /* peripherals at f0000000 */
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I )
-
-    /* PCI */
-#if (CONFIG_COMMANDS & CFG_CMD_PCI)
-    tlbentry( CFG_PCI_BASE,    SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I )
-#endif
-    tlbtab_end
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+	tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G)
+
+	tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR(2) detection
+	 * routine.
+	 */
+
+	/* internal ram (l2 cache) */
+	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
+
+	/* peripherals at f0000000 */
+	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
+
+	/* PCI */
+	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
+	tlbtab_end

board/amcc/luan/luan.c

@@ -105,105 +105,6 @@ int checkboard(void)
 }
 
 
-/*************************************************************************
- *  long int fixed_sdram()
- *
- ************************************************************************/
-static long int fixed_sdram(void)
-{					/* DDR2 init from BDI2000 script */
-	mtdcr( 0x10, 0x00000021 );	/* MCIF0_MCOPT2 - zero DCEN bit */
-	mtdcr( 0x11, 0x84000000 );
-	mtdcr( 0x10, 0x00000020 );	/* MCIF0_MCOPT1 - no ECC, 64 bits, 4 banks, DDR2 */
-	mtdcr( 0x11, 0x2D122000 );
-	mtdcr( 0x10, 0x00000026 );	/* MCIF0_CODT  - die termination on */
-	mtdcr( 0x11, 0x00800026 );
-	mtdcr( 0x10, 0x00000081 );	/* MCIF0_WRDTR - Write DQS Adv 90 + Fractional DQS Delay */
-	mtdcr( 0x11, 0x82000800 );
-	mtdcr( 0x10, 0x00000080 );	/* MCIF0_CLKTR - advance addr clock by 180 deg */
-	mtdcr( 0x11, 0x80000000 );
-	mtdcr( 0x10, 0x00000040 );	/* MCIF0_MB0CF - turn on CS0, N x 10 coll */
-	mtdcr( 0x11, 0x00000201 );
-	mtdcr( 0x10, 0x00000044 );	/* MCIF0_MB1CF - turn on CS0, N x 10 coll */
-	mtdcr( 0x11, 0x00000201 );
-	mtdcr( 0x10, 0x00000030 );	/* MCIF0_RTR   - refresh every 7.8125uS */
-	mtdcr( 0x11, 0x08200000 );
-	mtdcr( 0x10, 0x00000085 );	/* MCIF0_SDTR1 - timing register 1 */
-	mtdcr( 0x11, 0x80201000 );
-	mtdcr( 0x10, 0x00000086 );	/* MCIF0_SDTR2 - timing register 2 */
-	mtdcr( 0x11, 0x42103242 );
-	mtdcr( 0x10, 0x00000087 );	/* MCIF0_SDTR3 - timing register 3 */
-	mtdcr( 0x11, 0x0C100D14 );
-	mtdcr( 0x10, 0x00000088 );	/* MCIF0_MMODE - CAS is 4 cycles */
-	mtdcr( 0x11, 0x00000642 );
-	mtdcr( 0x10, 0x00000089 );	/* MCIF0_MEMODE - diff DQS disabled */
-	mtdcr( 0x11, 0x00000400 );	/*		  ODT term disabled */
-
-	mtdcr( 0x10, 0x00000050 );	/* MCIF0_INITPLR0 - NOP */
-	mtdcr( 0x11, 0x81b80000 );
-	mtdcr( 0x10, 0x00000051 );	/* MCIF0_INITPLR1 - PRE */
-	mtdcr( 0x11, 0x82100400 );
-	mtdcr( 0x10, 0x00000052 );	/* MCIF0_INITPLR2 - EMR2 */
-	mtdcr( 0x11, 0x80820000 );
-	mtdcr( 0x10, 0x00000053 );	/* MCIF0_INITPLR3 - EMR3 */
-	mtdcr( 0x11, 0x80830000 );
-	mtdcr( 0x10, 0x00000054 );	/* MCIF0_INITPLR4 - EMR DLL ENABLE */
-	mtdcr( 0x11, 0x80810000 );
-	mtdcr( 0x10, 0x00000055 );	/* MCIF0_INITPLR5 - MR DLL RESET */
-	mtdcr( 0x11, 0x80800542 );
-	mtdcr( 0x10, 0x00000056 );	/* MCIF0_INITPLR6 - PRE */
-	mtdcr( 0x11, 0x82100400 );
-	mtdcr( 0x10, 0x00000057 );	/* MCIF0_INITPLR7 - refresh */
-	mtdcr( 0x11, 0x99080000 );
-	mtdcr( 0x10, 0x00000058 );	/* MCIF0_INITPLR8 */
-	mtdcr( 0x11, 0x99080000 );
-	mtdcr( 0x10, 0x00000059 );	/* MCIF0_INITPLR9 */
-	mtdcr( 0x11, 0x99080000 );
-	mtdcr( 0x10, 0x0000005A );	/* MCIF0_INITPLR10 */
-	mtdcr( 0x11, 0x99080000 );
-	mtdcr( 0x10, 0x0000005B );	/* MCIF0_INITPLR11 - MR */
-	mtdcr( 0x11, 0x80800442 );
-	mtdcr( 0x10, 0x0000005C );	/* MCIF0_INITPLR12 - EMR OCD Default */
-	mtdcr( 0x11, 0x80810380 );
-	mtdcr( 0x10, 0x0000005D );	/* MCIF0_INITPLR13 - EMR OCD exit */
-	mtdcr( 0x11, 0x80810000 );
-	udelay( 10*1000 );
-
-	mtdcr( 0x10, 0x00000021 );	/* MCIF0_MCOPT2 - execute preloaded init */
-	mtdcr( 0x11, 0x28000000 );	/*		  set DC_EN */
-	udelay( 100*1000 );
-
-	mtdcr( 0x40, 0x0000F800 );	/* MQ0_B0BAS: base addr 00000000 / 256MB */
-	mtdcr( 0x41, 0x1000F800 );	/* MQ0_B1BAS: base addr 10000000 / 256MB */
-
-	mtdcr( 0x10, 0x00000078 );	/* MCIF0_RDCC - auto set read stage */
-	mtdcr( 0x11, 0x00000000 );
-	mtdcr( 0x10, 0x00000070 );	/* MCIF0_RQDC - read DQS delay control */
-	mtdcr( 0x11, 0x8000003A );	/*		enabled, frac DQS delay */
-	mtdcr( 0x10, 0x00000074 );	/* MCIF0_RFDC - two clock feedback delay */
-	mtdcr( 0x11, 0x00000200 );
-
-	return  512 << 20;
-}
-
-
-/*************************************************************************
- *  long int initdram
- *
- ************************************************************************/
-long int initdram( int board_type )
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram (0);
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-	return  dram_size;
-}
-
-
 /*************************************************************************
  *  int testdram()
  *

board/amcc/luan/u-boot.lds

@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/luan/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)

cpu/ppc4xx/start.S

@@ -1361,7 +1361,7 @@ ppcSync:
 relocate_code:
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_440SPE)
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	/*
 	 * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
 	 * to speed up the boot process. Now this cache needs to be disabled.

include/configs/luan.h

@@ -37,8 +37,9 @@
 #define CONFIG_440		1
 #define CONFIG_SYS_CLK_FREQ	33333333 /* external freq to pll	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
+#define CONFIG_ADD_RAM_INFO	1	/* Print additional info	*/
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -132,10 +133,9 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#undef  CONFIG_SPD_EEPROM		/* SPD EEPROM init doesn't support DDR2 */
-#define SPD_EEPROM_ADDRESS {0x52,0x53}	/* I2C SPD addresses */
-#define IIC0_DIMM0_ADDR         0x52
-#define IIC0_DIMM1_ADDR         0x53
+#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS	{0x53, 0x52}	/* SPD i2c spd addresses*/
+#undef CONFIG_DDR_ECC			/* no ECC support for now	*/
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -206,11 +206,6 @@
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 #define CONFIG_NET_MULTI		/* needed for NetConsole	*/
 
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
 #ifdef DEBUG
 #define CONFIG_PANIC_HANG
 #else
@@ -219,9 +214,7 @@
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL		|	\
 				CFG_CMD_ASKENV		|	\
-			        CFG_CMD_CACHE		|	\
 				CFG_CMD_DHCP		|	\
-				CFG_CMD_DIAG		|	\
 				CFG_CMD_ELF		|	\
 				CFG_CMD_EEPROM		|	\
 				CFG_CMD_I2C		|	\
@@ -232,7 +225,6 @@
 				CFG_CMD_PCI		|	\
 				CFG_CMD_PING		|	\
 				CFG_CMD_REGINFO		|	\
-				CFG_CMD_SETGETDCR	|	\
 				CFG_CMD_SDRAM		|	\
 				0)