common/lcd.c: remove global lcd_base

lcd_base is available as gd->fb_base as well, there is no need
to keep a seperate copy.

For completeness the ack of Bo Shen is for the atmel part.
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stelian Pop <stelian@popies.net>
Cc: Tom Warren <twarren@nvidia.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
[agust: also fix cm_t35 board while rebasing]
Signed-off-by: Anatolij Gustschin <agust@denx.de>

board/cm_t35/display.c

@@ -381,8 +381,6 @@ static enum display_type env_parse_displaytype(char *displaytype)
 	return NONE;
 }
 
-void *lcd_base;
-
 void lcd_ctrl_init(void *lcdbase)
 {
 	struct prcm *prcm = (struct prcm *)PRCM_BASE;

board/mcc200/lcd.c

@@ -68,10 +68,6 @@ vidinfo_t panel_info = {
 	LCD_WIDTH, LCD_HEIGHT, LCD_BPP
 };
 
-/*
- * Frame buffer memory information
- */
-void *lcd_base;			/* Start of framebuffer memory  */
 
 /*
  *  The device we use to communicate with PSoC
@@ -147,12 +143,12 @@ void lcd_enable (void)
 
 #if !defined(SWAPPED_LCD)
 	for (i=0; i<fb_size; i++) {
-		serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]);
+		serial_putc_raw_dev(PSOC_PSC, ((char *)gd->fb_base)[i]);
 	}
 #else
     {
 	int x, y, pwidth;
-	char *p = (char *)lcd_base;
+	char *p = (char *)gd->fb_base;
 
 	pwidth = ((panel_info.vl_col+7) >> 3);
 	for (y=0; y<panel_info.vl_row; y++) {

common/lcd.c

@@ -109,6 +109,7 @@ static short console_col;
 static short console_row;
 
 static void *lcd_console_address;
+static void *lcd_base;			/* Start of framebuffer memory	*/
 
 static char lcd_flush_dcache;	/* 1 to flush dcache after each lcd update */
 

drivers/video/atmel_hlcdfb.c

@@ -29,8 +29,6 @@
 #include <lcd.h>
 #include <atmel_hlcdc.h>
 
-void *lcd_base;				/* Start of framebuffer memory	*/
-
 /* configurable parameters */
 #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
 #define ATMEL_LCDC_DMA_BURST_LEN	8

drivers/video/atmel_lcdfb.c

@@ -29,8 +29,6 @@
 #include <lcd.h>
 #include <atmel_lcdc.h>
 
-void *lcd_base;				/* Start of framebuffer memory	*/
-
 /* configurable parameters */
 #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
 #define ATMEL_LCDC_DMA_BURST_LEN	8

drivers/video/exynos_fb.c

@@ -33,7 +33,7 @@
 
 #include "exynos_fb.h"
 
-void *lcd_base;
+DECLARE_GLOBAL_DATA_PTR;
 
 static unsigned int panel_width, panel_height;
 
@@ -44,11 +44,9 @@ static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
 
 	fb_size = vid->vl_row * vid->vl_col * (NBITS(vid->vl_bpix) >> 3);
 
-	lcd_base = lcdbase;
-
 	palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
 
-	exynos_fimd_lcd_init_mem((unsigned long)lcd_base,
+	exynos_fimd_lcd_init_mem((unsigned long)lcdbase,
 			(unsigned long)fb_size, palette_size);
 }
 
@@ -140,7 +138,7 @@ void lcd_ctrl_init(void *lcdbase)
 void lcd_enable(void)
 {
 	if (panel_info.logo_on) {
-		memset(lcd_base, 0, panel_width * panel_height *
+		memset((void *) gd->fb_base, 0, panel_width * panel_height *
 				(NBITS(panel_info.vl_bpix) >> 3));
 #ifdef CONFIG_CMD_BMP
 		draw_logo();

drivers/video/mpc8xx_lcd.c

@@ -255,14 +255,6 @@ vidinfo_t panel_info = {
 #endif
 /*----------------------------------------------------------------------*/
 
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base;			/* Start of framebuffer memory	*/
-
-/************************************************************************/
-
 void lcd_ctrl_init (void *lcdbase);
 void lcd_enable (void);
 #if LCD_BPP == LCD_COLOR8
@@ -392,8 +384,8 @@ void lcd_ctrl_init (void *lcdbase)
 	 * BIG NOTE:  This has to be modified to load A and B depending
 	 * upon the split mode of the LCD.
 	 */
-	lcdp->lcd_lcfaa = (ulong)lcd_base;
-	lcdp->lcd_lcfba = (ulong)lcd_base;
+	lcdp->lcd_lcfaa = (ulong)lcdbase;
+	lcdp->lcd_lcfba = (ulong)lcdbase;
 
 	/* MORE HACKS...This must be updated according to 823 manual
 	 * for different panels.

drivers/video/pxa_lcd.c

@@ -332,8 +332,6 @@ void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue);
 void lcd_ctrl_init	(void *lcdbase);
 void lcd_enable	(void);
 
-void *lcd_base;			/* Start of framebuffer memory	*/
-
 static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
 static void pxafb_setup_gpio (vidinfo_t *vid);
 static void pxafb_enable_controller (vidinfo_t *vid);

drivers/video/tegra.c

@@ -60,8 +60,6 @@ enum {
 	LCD_MAX_LOG2_BPP	= 4,		/* 2^4 = 16 bpp */
 };
 
-void *lcd_base;			/* Start of framebuffer memory	*/
-
 vidinfo_t panel_info = {
 	/* Insert a value here so that we don't end up in the BSS */
 	.vl_col = -1,
@@ -90,8 +88,6 @@ void lcd_ctrl_init(void *lcdbase)
 
 	assert(disp_config);
 
-	lcd_base = (void *)disp_config->frame_buffer;
-
 	/* Make sure that we can acommodate the selected LCD */
 	assert(disp_config->width <= LCD_MAX_WIDTH);
 	assert(disp_config->height <= LCD_MAX_HEIGHT);
@@ -112,7 +108,7 @@ void lcd_ctrl_init(void *lcdbase)
 	/* Enable flushing after LCD writes if requested */
 	lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
 
-	debug("LCD frame buffer at %p\n", lcd_base);
+	debug("LCD frame buffer at %08X\n", disp_config->frame_buffer);
 }
 
 ulong calc_fbsize(void)

include/lcd.h

@@ -33,11 +33,6 @@ extern char lcd_is_enabled;
 
 extern int lcd_line_length;
 
-/*
- * Frame buffer memory information
- */
-extern void *lcd_base;			/* Start of framebuffer memory	*/
-
 extern struct vidinfo panel_info;
 
 extern void lcd_ctrl_init (void *lcdbase);