Merge remote branch 'origin/master' into next

CHANGELOG

@@ -1,3 +1,103 @@
+commit 060f28532b09dd3d2c78423bdd809ac768a27629
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Mar 25 14:07:23 2010 +0100
+
+    cmd_usb.c: print debug messages only when DEBUG is defined
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a574cff121b1479c8e962b7a2a29310020387260
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Mar 24 12:19:19 2010 +0100
+
+    ml300: remove support for broken, orphaned board
+
+    The ml300 board has a number of issues, but nobody cares about this
+    long-orphaned board any more.  Remove it.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+    Acked-by: Michal Simek <monstr@monstr.eu>
+
+commit 04387d24a17b1ee13024dd4779da4b84d47c65cc
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Mar 27 23:37:46 2010 +0100
+
+    mkimage: fix Segmentation Fault when run without "-n name" option
+
+    The restructuring of the mkimage command in commit 89a4d6b1 ("tools:
+    mkimage: split code into core, default and FIT image specific")
+    introduced a bug that caused mkimage to segfault when run without
+    "-n name" option.  Initialize the imagename entry to prevent that.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c40c94a3d20a8616264c2dfcda85279185d69aeb
+Author: Renato Andreola <renato.andreola@imagos.it>
+Date:	Wed Mar 24 23:00:47 2010 +0800
+
+    cfi_flash: precision and underflow problem in tout calculation
+
+    With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
+
+    Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
+    Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+    Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c550afada5fcad426aa6a219a329feb9eedae8b2
+Author: Rupjyoti Sarmah <rsarmah@appliedmicro.com>
+Date:	Wed Mar 24 16:52:02 2010 +0530
+
+    ppc4xx fix unstable 440EPx bootstrap options
+
+    440EPx fixed bootstrap options A, B, D, and E sets PLL FWDVA to a value = 1.
+    This results in the PLLOUTB being greater than the CPU clock frequency
+    resulting unstable 440EPx operation resulting in various software hang
+    conditions.
+
+    This patch reprograms the FWDVA satisfying the requirement of setting FWDVB
+    to a value greater than 1 while using one of the four deafult bootstrap options.
+
+    Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com>
+    Acked-by : Victor Gallardo <vgallardo@appliedmicro.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fb508b8b39a52a4063d098f5a9b4355bc5b30c14
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date:	Wed Mar 24 10:16:20 2010 +0100
+
+    at91: Get rid of some warnings when building for otc570
+
+    The soft-i2c code for AT91 defines I2C_SOFT_DECLARATIONS
+    for direct access by dereferencing a pio pointer.
+    The OTC570 platform uses the AT91 gpio API so it does not
+    need the pio variable.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+
+commit acb13868936a28502782a16e1edaec378e494a29
+Author: Alessandro Rubini <rubini@unipv.it>
+Date:	Sat Mar 13 17:44:08 2010 +0100
+
+    lcd: make 16bpp work
+
+    Support for 16bpp was supposed to be in the code but was not working.
+    This makes it work and has been tested in the nhk8815 board.
+
+    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+    Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 152dda3d94e97ede7af3f9560a59a659384d4585
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Mar 22 23:25:00 2010 +0100
+
+    Prepare v2010.03-rc2
+
+    Update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit d650da2dd4af99967aabc43cccbd8f160eb4cea6
 Author: Matthias Kaehlcke <matthias@kaehlcke.net>
 Date:	Tue Mar 9 22:13:33 2010 +0100

MAKEALL

@@ -236,7 +236,6 @@ LIST_4xx="		\
 	MIP405		\
 	MIP405T		\
 	ML2		\
-	ml300		\
 	ml507		\
 	ml507_flash	\
 	neo		\

Makefile

@@ -24,7 +24,7 @@
 VERSION = 2010
 PATCHLEVEL = 03
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -1415,9 +1415,6 @@ MIP405T_config:	unconfig
 ML2_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
 
-ml300_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
-
 ml507_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507

board/xilinx/ml300/Makefile

@@ -1,70 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-$(shell mkdir -p $(obj)../xilinx_iic)
-endif
-
-INCS		:= -I../common -I../xilinx_enet -I../xilinx_iic
-CFLAGS		+= $(INCS)
-HOSTCFLAGS	+= $(INCS)
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o \
-	  serial.o \
-	  ../xilinx_enet/emac_adapter.o  ../xilinx_enet/xemac.o \
-	  ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
-	  ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
-	  ../xilinx_enet/xemac_intr_dma.o ../xilinx_iic/iic_adapter.o \
-	  ../xilinx_iic/xiic_l.o ../common/xipif_v1_23_b.o \
-	  ../common/xbasic_types.o ../common/xdma_channel.o \
-	  ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
-	  ../common/xversion.o \
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################

board/xilinx/ml300/config.mk

@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0x04000000
-
-# Use board specific linker script
-LDSCRIPT := $(SRCTREE)/board/xilinx/ml300/u-boot.lds

board/xilinx/ml300/init.S

@@ -1,44 +0,0 @@
-/*
- * init.S: Stubs for U-Boot initialization
- *
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- *     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx hardware products are not intended for use in life support
- *     appliances, devices, or systems. Use in such applications is
- *     expressly prohibited.
- *
- *
- *     (c) Copyright 2002-2004 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-	.globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
-	blr

board/xilinx/ml300/ml300.c

@@ -1,128 +0,0 @@
-/*
- * ml300.c: U-Boot platform support for Xilinx ML300 board
- *
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- *     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx hardware products are not intended for use in life support
- *     appliances, devices, or systems. Use in such applications is
- *     expressly prohibited.
- *
- *
- *     (c) Copyright 2002-2004 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-extern void convert_env(void);
-#endif
-
-int
-board_pre_init(void)
-{
-	return 0;
-}
-
-int
-checkboard(void)
-{
-	char tmp[64];		/* long enough for environment variables */
-	char *s, *e;
-	int i = getenv_r("L", tmp, sizeof (tmp));
-
-	if (i < 0) {
-		printf("### No HW ID - assuming ML300");
-	} else {
-		for (e = tmp; *e; ++e) {
-			if (*e == ' ')
-				break;
-		}
-
-		printf("### Board Serial# is ");
-
-		for (s = tmp; s < e; ++s) {
-			putc(*s);
-		}
-
-	}
-	putc('\n');
-
-	return (0);
-}
-
-phys_size_t
-initdram(int board_type)
-{
-	return 128 * 1024 * 1024;
-}
-
-int
-testdram(void)
-{
-	printf("test: xxx MB - ok\n");
-
-	return (0);
-}
-
-/* implement functions originally in cpu/ppc4xx/speed.c */
-void
-get_sys_info(sys_info_t * sysInfo)
-{
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-
-	/* only correct if the PLB and OPB run at the same frequency */
-	sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3;
-}
-
-ulong
-get_PCI_freq(void)
-{
-	ulong val;
-	PPC4xx_SYS_INFO sys_info;
-
-	get_sys_info(&sys_info);
-	val = sys_info.freqPCI;
-	return val;
-}
-
-#ifdef CONFIG_MISC_INIT_R
-
-int
-misc_init_r()
-{
-	/* convert env name and value to u-boot standard */
-	convert_env();
-	return 0;
-}
-
-#endif

board/xilinx/ml300/serial.c

@@ -1,154 +0,0 @@
-/*
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
- *     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx hardware products are not intended for use in life support
- *     appliances, devices, or systems. Use in such applications is
- *     expressly prohibited.
- *
- *
- *     (c) Copyright 2002-2004 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <config.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define USE_CHAN1 \
-	((defined XPAR_UARTNS550_0_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN1))
-#define USE_CHAN2 \
-	((defined XPAR_UARTNS550_1_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN2))
-
-#if USE_CHAN1
-#include <ns16550.h>
-#endif
-
-#if USE_CHAN1
-const NS16550_t COM_PORTS[] = { (NS16550_t) (XPAR_UARTNS550_0_BASEADDR + 3)
-#if USE_CHAN2
-	    , (NS16550_t) (XPAR_UARTNS550_1_BASEADDR + 3)
-#endif
-};
-#endif
-
-int
-serial_init(void)
-{
-#if USE_CHAN1
-	int clock_divisor;
-
-	clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	(void) NS16550_init(COM_PORTS[0], clock_divisor);
-#if USE_CHAN2
-	clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	(void) NS16550_init(COM_PORTS[1], clock_divisor);
-#endif
-#endif
-	return 0;
-
-}
-
-void
-serial_putc(const char c)
-{
-	if (c == '\n')
-		NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
-
-	NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
-}
-
-int
-serial_getc(void)
-{
-	return NS16550_getc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-int
-serial_tstc(void)
-{
-	return NS16550_tstc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
-}
-
-void
-serial_setbrg(void)
-{
-#if USE_CHAN1
-	int clock_divisor;
-
-	clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	NS16550_reinit(COM_PORTS[0], clock_divisor);
-#if USE_CHAN2
-	clock_divisor = XPAR_UARTNS550_1_CLOCK_FREQ_HZ / 16 / gd->baudrate;
-	NS16550_reinit(COM_PORTS[1], clock_divisor);
-#endif
-#endif
-}
-
-void
-serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
-#if defined(CONFIG_CMD_KGDB)
-void
-kgdb_serial_init(void)
-{
-}
-
-void
-putDebugChar(int c)
-{
-	serial_putc(c);
-}
-
-void
-putDebugStr(const char *str)
-{
-	serial_puts(str);
-}
-
-int
-getDebugChar(void)
-{
-	return serial_getc();
-}
-
-void
-kgdb_interruptible(int yes)
-{
-	return;
-}
-#endif

board/xilinx/ml300/u-boot.lds

@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-ENTRY(_start)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-/*
-    cpu/ppc4xx/start.o	(.text)
-    board/xilinx/ml300/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/4xx_uart.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    drivers/net/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-*/
-/*    . = env_offset;*/
-/*    common/env_embedded.o(.text)*/
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.eh_frame)
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}

board/xilinx/ml300/u-boot.lds.debug

@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}

board/xilinx/ml300/xparameters.h

@@ -1,196 +0,0 @@
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 6.2 EDK_Gm.11
-* DO NOT EDIT.
-*
-* Copyright (c) 2003 Xilinx, Inc.  All rights reserved.
-*
-* Description: Driver parameters
-*
-*******************************************************************/
-
-/******************************************************************/
-
-/* U-Boot Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_XPCI_NUM_INSTANCES 1
-#define XPAR_XPCI_CLOCK_HZ 33333333
-#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
-#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
-#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
-#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
-#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
-#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
-#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
-#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
-#define XPAR_XGPIO_NUM_INSTANCES 2
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 2
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
-#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
-#define XPAR_OPB_UART16550_1_DEVICE_ID 1
-
-/******************************************************************/
-
-#define XPAR_XSPI_NUM_INSTANCES 1
-#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
-#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
-#define XPAR_OPB_SPI_0_DEVICE_ID 0
-#define XPAR_OPB_SPI_0_FIFO_EXIST 1
-#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
-#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
-#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
-#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
-#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
-#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
-#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
-#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
-#define XPAR_DCR_INTC_0_DEVICE_ID 0
-#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
-
-/******************************************************************/
-
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
-#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
-#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
-#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
-#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
-#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
-#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
-#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
-#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
-#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
-#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
-#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 8
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/

board/xilinx/xilinx_iic/iic_adapter.c

@@ -1,529 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-
-#include <config.h>
-#include <common.h>
-#include <environment.h>
-#include <net.h>
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#include <i2c.h>
-#include "xiic_l.h"
-
-#define IIC_DELAY     5000
-
-static u8 envStep = 0;		/* 0 means crc has not been read */
-const u8 hex[] = "0123456789ABCDEF"; /* lookup table for ML300 CRC */
-
-/************************************************************************
- * Use Xilinx provided driver to send data to EEPROM using iic bus.
- */
-static void
-send(u32 adr, u8 * data, u32 len)
-{
-	u8 sendBuf[34];		/* first 2-bit is address and others are data */
-	u32 pos, wlen;
-	u32 ret;
-
-	wlen = 32;
-	for (pos = 0; pos < len; pos += 32) {
-		if ((len - pos) < 32)
-			wlen = len - pos;
-
-		/* Put address and data bits together */
-		sendBuf[0] = (u8) ((adr + pos) >> 8);
-		sendBuf[1] = (u8) (adr + pos);
-		memcpy(&sendBuf[2], &data[pos], wlen);
-
-		/* Send to EEPROM through iic bus */
-		ret = XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1,
-				sendBuf, wlen + 2);
-
-		udelay(IIC_DELAY);
-	}
-}
-
-/************************************************************************
- * Use Xilinx provided driver to read data from EEPROM using the iic bus.
- */
-static void
-receive(u32 adr, u8 * data, u32 len)
-{
-	u8 address[2];
-	u32 ret;
-
-	address[0] = (u8) (adr >> 8);
-	address[1] = (u8) adr;
-
-	/* Provide EEPROM address */
-	ret =
-	    XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, address,
-		      2);
-	/* Receive data from EEPROM */
-	ret =
-	    XIic_Recv(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, data, len);
-}
-
-/************************************************************************
- * Convert a hexadecimal string to its equivalent integer value.
- */
-static u8
-axtoi(u8 * hexStg)
-{
-	u8 n;			/* position in string */
-	u8 m;			/* position in digit[] to shift */
-	u8 count;		/* loop index */
-	u8 intValue;		/* integer value of hex string */
-	u8 digit[2];		/* hold values to convert */
-
-	for (n = 0; n < 2; n++) {
-		if (hexStg[n] == '\0')
-			break;
-		if (hexStg[n] > 0x29 && hexStg[n] < 0x40)
-			digit[n] = hexStg[n] & 0x0f;
-		else if (hexStg[n] >= 'a' && hexStg[n] <= 'f')
-			digit[n] = (hexStg[n] & 0x0f) + 9;
-		else if (hexStg[n] >= 'A' && hexStg[n] <= 'F')
-			digit[n] = (hexStg[n] & 0x0f) + 9;
-		else
-			break;
-	}
-
-	intValue = 0;
-	count = n;
-	m = n - 1;
-	n = 0;
-	while (n < count) {
-		intValue = intValue | (digit[n] << (m << 2));
-		m--;		/* adjust the position to set */
-		n++;		/* next digit to process */
-	}
-
-	return (intValue);
-}
-
-/************************************************************************
- * Convert an integer string to its equivalent value.
- */
-static u8
-atoi(uchar * string)
-{
-	u8 res = 0;
-	while (*string >= '0' && *string <= '9') {
-		res *= 10;
-		res += *string - '0';
-		string++;
-	}
-
-	return res;
-}
-
-/************************************************************************
- * Key-value pairs are separated by "=" sign.
- */
-static void
-findKey(uchar * buffer, int *loc, u8 len)
-{
-	u32 i;
-
-	for (i = 0; i < len; i++)
-		if (buffer[i] == '=') {
-			*loc = i;
-			return;
-		}
-
-	/* return -1 is no "=" sign found */
-	*loc = -1;
-}
-
-/************************************************************************
- * Compute a new ML300 CRC when user calls the saveenv command.
- * Also update EEPROM with new CRC value.
- */
-static u8
-update_crc(u32 len, uchar * data)
-{
-	uchar temp[6] = { 'C', '=', 0x00, 0x00, 0x00, 0x00 };
-	u32 crc;		/* new crc value */
-	u32 i;
-
-	crc = 0;
-
-	/* calculate new CRC */
-	for (i = 0; i < len; i++)
-		crc += data[i];
-
-	/* CRC includes key for check sum */
-	crc += 'C' + '=';
-
-	/* compose new CRC to be updated */
-	temp[2] = hex[(crc >> 4) & 0xf];
-	temp[3] = hex[crc & 0xf];
-
-	/* check to see if env size exceeded */
-	if (len + 6 > ENV_SIZE) {
-		printf("ERROR: not enough space to store CRC on EEPROM");
-		return 1;
-	}
-
-	memcpy(data + len, temp, 6);
-	return 0;
-}
-
-/************************************************************************
- * Read out ML300 CRC and compare it with a runtime calculated ML300 CRC.
- * If equal, then pass back a u-boot CRC value, otherwise pass back
- * junk to indicate CRC error.
-*/
-static void
-read_crc(uchar * buffer, int len)
-{
-	u32 addr, n;
-	u32 crc;		/* runtime crc */
-	u8 old[2] = { 0xff, 0xff };	/* current CRC in EEPROM */
-	u8 stop;		/* indication of end of env data */
-	u8 pre;			/* previous EEPROM data bit */
-	int i, loc;
-
-	addr = CONFIG_ENV_OFFSET;	/* start from first env address */
-	n = 0;
-	pre = 1;
-	stop = 1;
-	crc = 0;
-
-	/* calculate runtime CRC according to ML300 and read back
-	   old CRC stored in the EEPROM */
-	while (n < CONFIG_ENV_SIZE) {
-		receive(addr, buffer, len);
-
-		/* found two null chars, end of env */
-		if ((pre || buffer[0]) == 0)
-			break;
-
-		findKey(buffer, &loc, len);
-
-		/* found old check sum, read and store old CRC */
-		if ((loc == 0 && pre == 'C')
-		    || (loc > 0 && buffer[loc - 1] == 'C'))
-			receive(addr + loc + 1, old, 2);
-
-		pre = buffer[len - 1];
-
-		/* calculate runtime ML300 CRC */
-		crc += buffer[0];
-		i = 1;
-		do {
-			crc += buffer[i];
-			stop = buffer[i] || buffer[i - 1];
-			i++;
-		} while (stop && (i < len));
-
-		if (stop == 0)
-			break;
-
-		n += len;
-		addr += len;
-	}
-
-	/* exclude old CRC from runtime calculation */
-	crc -= (old[0] + old[1]);
-
-	/* match CRC values, send back u-boot CRC */
-	if ((old[0] == hex[(crc >> 4) & 0xf])
-	    && (old[1] == hex[crc & 0xf])) {
-		crc = 0;
-		n = 0;
-		addr =
-		    CONFIG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
-								     data);
-		/* calculate u-boot crc */
-		while (n < ENV_SIZE) {
-			receive(addr, buffer, len);
-			crc = crc32(crc, buffer, len);
-			n += len;
-			addr += len;
-		}
-
-		memcpy(buffer, &crc, 4);
-	}
-}
-
-/************************************************************************
- * Convert IP address to hexadecimals.
- */
-static void
-ip_ml300(uchar * s, uchar * res)
-{
-	char temp[2];
-	u8 i;
-
-	res[0] = 0x00;
-
-	for (i = 0; i < 4; i++) {
-		sprintf(temp, "%02x", atoi(s));
-		s = (uchar *)strchr((char *)s, '.') + 1;
-		strcat((char *)res, temp);
-	}
-}
-
-/************************************************************************
- * Change 0xff (255), a dummy null char to 0x00.
- */
-static void
-change_null(uchar * s)
-{
-	if (s != NULL) {
-		change_null((uchar *)strchr((char *)s + 1, 255));
-		*(strchr((char *)s, 255)) = '\0';
-	}
-}
-
-/************************************************************************
- * Update environment variable name and values to u-boot standard.
- */
-void
-convert_env(void)
-{
-	char *s;		/* pointer to env value */
-	char temp[20];		/* temp storage for addresses */
-
-	/* E -> ethaddr */
-	s = getenv("E");
-	if (s != NULL) {
-		sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
-			s[0], s[1],  s[ 2], s[ 3],
-			s[4], s[5],  s[ 6], s[ 7],
-			s[8], s[9],  s[10], s[11] );
-		setenv("ethaddr", temp);
-		setenv("E", NULL);
-	}
-
-	/* L -> serial# */
-	s = getenv("L");
-	if (s != NULL) {
-		setenv("serial#", s);
-		setenv("L", NULL);
-	}
-
-	/* I -> ipaddr */
-	s = getenv("I");
-	if (s != NULL) {
-		sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
-			axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
-		setenv("ipaddr", temp);
-		setenv("I", NULL);
-	}
-
-	/* S -> serverip */
-	s = getenv("S");
-	if (s != NULL) {
-		sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
-			axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
-		setenv("serverip", temp);
-		setenv("S", NULL);
-	}
-
-	/* A -> bootargs */
-	s = getenv("A");
-	if (s != NULL) {
-		setenv("bootargs", s);
-		setenv("A", NULL);
-	}
-
-	/* F -> bootfile */
-	s = getenv("F");
-	if (s != NULL) {
-		setenv("bootfile", s);
-		setenv("F", NULL);
-	}
-
-	/* M -> bootcmd */
-	s = getenv("M");
-	if (s != NULL) {
-		setenv("bootcmd", s);
-		setenv("M", NULL);
-	}
-
-	/* Don't include C (CRC) */
-	setenv("C", NULL);
-}
-
-/************************************************************************
- * Save user modified environment values back to EEPROM.
- */
-static void
-save_env(void)
-{
-	char eprom[ENV_SIZE];	/* buffer to be written back to EEPROM */
-	char *s, temp[20];
-	char ff[] = { 0xff, 0x00 };	/* dummy null value */
-	u32 len;		/* length of env to be written to EEPROM */
-
-	eprom[0] = 0x00;
-
-	/* ethaddr -> E */
-	s = getenv("ethaddr");
-	if (s != NULL) {
-		strcat(eprom, "E=");
-		sprintf(temp, "%c%c%c%c%c%c%c%c%c%c%c%c",
-			*s, *(s + 1), *(s + 3), *(s + 4), *(s + 6), *(s + 7),
-			*(s + 9), *(s + 10), *(s + 12), *(s + 13), *(s + 15),
-			*(s + 16));
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* serial# -> L */
-	s = getenv("serial#");
-	if (s != NULL) {
-		strcat(eprom, "L=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* ipaddr -> I */
-	s = getenv("ipaddr");
-	if (s != NULL) {
-		strcat(eprom, "I=");
-		ip_ml300((uchar *)s, (uchar *)temp);
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* serverip -> S */
-	s = getenv("serverip");
-	if (s != NULL) {
-		strcat(eprom, "S=");
-		ip_ml300((uchar *)s, (uchar *)temp);
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* bootargs -> A */
-	s = getenv("bootargs");
-	if (s != NULL) {
-		strcat(eprom, "A=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* bootfile -> F */
-	s = getenv("bootfile");
-	if (s != NULL) {
-		strcat(eprom, "F=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* bootcmd -> M */
-	s = getenv("bootcmd");
-	if (s != NULL) {
-		strcat(eprom, "M=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	len = strlen(eprom);	/* find env length without crc */
-	change_null((uchar *)eprom);	/* change 0xff to 0x00 */
-
-	/* update EEPROM env values if there is enough space */
-	if (update_crc(len, (uchar *)eprom) == 0)
-		send(CONFIG_ENV_OFFSET, (uchar *)eprom, len + 6);
-}
-
-/************************************************************************
- * U-boot call for EEPROM read associated activities.
- */
-int
-i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-
-	if (envStep == 0) {
-		/* first read call is for crc */
-		read_crc(buffer, len);
-		++envStep;
-		return 0;
-	} else if (envStep == 1) {
-		/* then read out EEPROM content for runtime u-boot CRC calculation */
-		receive(addr, buffer, len);
-
-		if (addr + len - CONFIG_ENV_OFFSET == CONFIG_ENV_SIZE)
-			/* end of runtime crc read */
-			++envStep;
-		return 0;
-	}
-
-	if (len < 2) {
-		/* when call getenv_r */
-		receive(addr, buffer, len);
-	} else if (addr + len < CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) {
-		/* calling env_relocate(), but don't read out
-		   crc value from EEPROM */
-		receive(addr, buffer + 4, len);
-	} else {
-		receive(addr, buffer + 4, len - 4);
-	}
-
-	return 0;
-
-}
-
-/************************************************************************
- * U-boot call for EEPROM write acativities.
- */
-int
-i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	/* save env on last page write called by u-boot */
-	if (addr + len >= CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-		save_env();
-
-	return 0;
-}
-
-/************************************************************************
- * Dummy function.
- */
-int
-i2c_probe(uchar chip)
-{
-	return 1;
-}
-
-#endif

common/cmd_usb.c

@@ -601,7 +601,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 					ok++;
 					if (devno)
 						printf("\n");
-					printf("print_part of %x\n", devno);
+					debug("print_part of %x\n", devno);
 					print_part(stor_dev);
 				}
 			}
@@ -610,7 +610,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			stor_dev = usb_stor_get_dev(devno);
 			if (stor_dev->type != DEV_TYPE_UNKNOWN) {
 				ok++;
-				printf("print_part of %x\n", devno);
+				debug("print_part of %x\n", devno);
 				print_part(stor_dev);
 			}
 		}

common/lcd.c

@@ -63,7 +63,7 @@
 /************************************************************************/
 #ifdef CONFIG_LCD_LOGO
 # include <bmp_logo.h>		/* Get logo data, width and height	*/
-# if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
+# if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) && (LCD_BPP != LCD_COLOR16)
 #  error Default Color Map overlaps with Logo Color Map
 # endif
 #endif
@@ -218,8 +218,12 @@ static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
 
 	for (row=0;  row < VIDEO_FONT_HEIGHT;  ++row, dest += lcd_line_length)  {
 		uchar *s = str;
-		uchar *d = dest;
 		int i;
+#if LCD_BPP == LCD_COLOR16
+		ushort *d = (ushort *)dest;
+#else
+		uchar *d = dest;
+#endif
 
 #if LCD_BPP == LCD_MONOCHROME
 		uchar rest = *d & -(1 << (8-off));
@@ -244,7 +248,7 @@ static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
 				bits <<= 1;
 			}
 #elif LCD_BPP == LCD_COLOR16
-			for (c=0; c<16; ++c) {
+			for (c=0; c<8; ++c) {
 				*d++ = (bits & 0x80) ?
 						lcd_color_fg : lcd_color_bg;
 				bits <<= 1;
@@ -521,6 +525,13 @@ void bitmap_plot (int x, int y)
 		cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
 #elif defined(CONFIG_ATMEL_LCD)
 		cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
+#else
+		/*
+		 * default case: generic system with no cmap (most likely 16bpp)
+		 * We set cmap to the source palette, so no change is done.
+		 * This avoids even more ifdef in the next stanza
+		 */
+		cmap = bmp_logo_palette;
 #endif
 
 		WATCHDOG_RESET();
@@ -559,10 +570,15 @@ void bitmap_plot (int x, int y)
 		}
 	}
 	else { /* true color mode */
+		u16 col16;
 		fb16 = (ushort *)(lcd_base + y * lcd_line_length + x);
 		for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
 			for (j=0; j<BMP_LOGO_WIDTH; j++) {
-				fb16[j] = bmp_logo_palette[(bmap[j])];
+				col16 = bmp_logo_palette[(bmap[j]-16)];
+				fb16[j] =
+					((col16 & 0x000F) << 1) |
+					((col16 & 0x00F0) << 3) |
+					((col16 & 0x0F00) << 4);
 				}
 			bmap += BMP_LOGO_WIDTH;
 			fb16 += panel_info.vl_col;

cpu/ppc4xx/cpu_init.c

@@ -111,17 +111,72 @@ void reconfigure_pll(u32 new_cpu_freq)
 			mtcpr(CPR0_SPCID, reg);
 			reset_needed = 1;
 		}
+	}
+
+	/* Get current value of FWDVA.*/
+	mfcpr(CPR0_PLLD, reg);
+	temp = (reg & PLLD_FWDVA_MASK) >> 16;
 
-		/* Set reload inhibit so configuration will persist across
-		 * processor resets */
+	/*
+	 * Check to see if FWDVA has been set to value of 1. if it has we must
+	 * modify it.
+	 */
+	if (temp == 1) {
+		mfcpr(CPR0_PLLD, reg);
+		/* Get current value of fbdv.  */
+		temp = (reg & PLLD_FBDV_MASK) >> 24;
+		fbdv = temp ? temp : 32;
+		/* Get current value of lfbdv. */
+		temp = (reg & PLLD_LFBDV_MASK);
+		lfbdv = temp ? temp : 64;
+		/*
+		 * Load register that contains current boot strapping option.
+		 */
+		mfcpr(CPR0_ICFG, reg);
+		/* Shift strapping option into low 3 bits.*/
+		reg = (reg >> 28);
+
+		if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
+		    (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
+			/*
+			 * Get current value of FWDVA. Assign current FWDVA to
+			 * new FWDVB.
+			 */
+			mfcpr(CPR0_PLLD, reg);
+			target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
+			fwdvb = target_fwdvb ? target_fwdvb : 8;
+			/*
+			 * Get current value of FWDVB. Assign current FWDVB to
+			 * new FWDVA.
+			 */
+			target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
+			fwdva = target_fwdva ? target_fwdva : 16;
+			/*
+			 * Update CPR0_PLLD with switched FWDVA and FWDVB.
+			 */
+			reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+				PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+			reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
+				((fwdvb == 8 ? 0 : fwdvb) << 8) |
+				((fbdv == 32 ? 0 : fbdv) << 24) |
+				(lfbdv == 64 ? 0 : lfbdv);
+			mtcpr(CPR0_PLLD, reg);
+			/* Acknowledge that a reset is required. */
+			reset_needed = 1;
+		}
+	}
+
+	if (reset_needed) {
+		/*
+		 * Set reload inhibit so configuration will persist across
+		 * processor resets
+		 */
 		mfcpr(CPR0_ICFG, reg);
 		reg &= ~CPR0_ICFG_RLI_MASK;
 		reg |= 1 << 31;
 		mtcpr(CPR0_ICFG, reg);
-	}
 
-	/* Reset processor if configuration changed */
-	if (reset_needed) {
+		/* Reset processor if configuration changed */
 		__asm__ __volatile__ ("sync; isync");
 		mtspr(SPRN_DBCR0, 0x20000000);
 	}

doc/README.ml300

@@ -1,128 +0,0 @@
-Xilinx ML300 platform
-=====================
-
-0. Introduction
----------------
-
-The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
-integrated AMCC PowerPC 405 core. The board is normally booted from
-System ACE CF. U-Boot is then run out of main memory.
-
-An FPGA is a configurable and thus very flexible device. To
-accommodate for this flexibility this port of U-Boot includes the
-required means to regenerate the drivers and configuration files if
-you decide to change the hardware design. The required steps are
-described below.
-
-
-1. Requirements
----------------
-
-To compile and run U-Boot on the Xilinx ML300 platform you need the
-following items.
-
-- A Xilinx ML300 platform (see http://www.xilinx.com/ml300)
-- EDK and ISE development tools (shipping with ML300)
-- Parallel4 cable (shipping with ML300)
-- The EDK reference design for ML300. You can get this as design #6 from
-  http://www.xilinx.com/ise/embedded/edk_examples.htm
-- A BOOTP/TFTP server
-
-
-2. Quick Start
---------------
-
-To compile and run U-Boot on ML300 follow the steps below. Make sure
-to consult the documentation for U-Boot, EDK, and the EDK reference
-design for ML300 if you have any questions.
-
-1. Implement the EDK reference design for ML300. You can use any of
-   the project files, for example from a xygwin shell:
-   $ xps -nw system_linux.xmp
-   XPS% run init_bram
-2. Configure and compile U-Boot. Change into the root directory of
-   U-Boot and run:
-   $ export CROSS_COMPILE=powerpc-eabi-
-   $ make ml300_config
-   $ make
-3. Set up the ML300, connect the Parallel4 and the serial cable. Start
-   a terminal on your host computer and set the communication
-   parameters to 9600,8N1,no handshake.
-4. Set up the BOOTP/TFTP server on your host machine. U-Boot is
-   preconfigured to use a fixed HW MAC address of 00:0A:35:00:22:01.
-5. Download the bitstream to the ML300.
-6. Use XMD to download and run U-Boot on the ML300:
-   $ xmd
-   XMD% ppcconnect
-   XMD% dow u-boot
-   XMD% run
-
-You can now make an ACE file out of bitstream and U-Boot:
-   $ xmd genace.tcl -jprog -board ml300 -hw  \
-     implementation/download.bit -elf u-boot -ace top.ace
-
-Put the ACE file onto the MicroDrive, for example into xilinx/myace,
-and reboot ML300.
-
-
-3. Generating a Custom BSP for U-Boot
--------------------------------------
-
-If you decide to change the EDK reference design for ML300 or if you
-build a new design from scratch either with the Base System Builder in
-XPS or all by hand you most likely will change the base addresses for
-the Uart and the Ethernet peripheral. If you do so you will have two
-options:
-
-1. Edit boards/xilinx/ml300/xparameters.h to reflect the changes you
-   made to your hardware.
-2. Use the MLD technology provided by Xilinx Platform Studio to make
-   the changes automatically. To do so go to the root directory of the
-   EDK reference design for ML300. Copy the Linux project file and the
-   Linux software configuration file:
-   $ cp system_linux.xmp system_uboot.xmp
-   $ cp system_linux.mss system_uboot.mss
-
-   Edit system_uboot.xmp and and have it point to system_uboot.mss for
-   the software configuration.
-
-   Then, copy the sw_services directory in
-   boards/xilinx/ml300/sw_services to the root directory of the EDK
-   reference design for ML300.
-   $ cp -R <uboot dir>/boards/xilinx/ml300/sw_services <edk dir>
-
-   Modify system_uboot.mss. Look for the Linux library definition
-   and change it to generate a BSP for U-Boot. An example, might look
-   like this:
-
-   BEGIN LIBRARY
-    PARAMETER LIBRARY_NAME = uboot
-    PARAMETER LIBRARY_VER = 1.00.a
-    PARAMETER CONNECTED_PERIPHS = (opb_uart16550_0,opb_ethernet_0)
-    PARAMETER TARGET_DIR = <uboot dir>
-   END
-
-   Now, you are ready to generate the Xilinx ML300 BSP for U-Boot:
-   $ xps -nw system_uboot.xmp
-   XPS% run libs
-
-   If all goes well the new configuration has been copied into the
-   right places within the U-Boot source tree. Recompile U-Boot and
-   run it on the ML300.
-
-
-4. ToDo
--------
-
-- Add support for all other peripherals on ML300.
-- Read the MAC address out of the IIC EEPROM.
-- Store the bootargs in the IIC EEPROM.
-
-
-5. References
--------------
-
-ML300:			http://www.xilinx.com/ml300
-EDK:			http://www.xilinx.com/edk
-ISE:			http://www.xilinx.com/ise
-Reference Design:	http://www.xilinx.com/ise/embedded/edk_examples.htm

drivers/mtd/cfi_flash.c

@@ -537,7 +537,10 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
 	ulong start;
 
 #if CONFIG_SYS_HZ != 1000
-	tout *= CONFIG_SYS_HZ/1000;
+	if ((ulong)CONFIG_SYS_HZ > 100000)
+		tout *= (ulong)CONFIG_SYS_HZ / 1000;  /* for a big HZ, avoid overflow */
+	else
+		tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000);
 #endif
 
 	/* Wait for command completion */

include/configs/ml300.h

@@ -1,181 +0,0 @@
-/*
- * ML300.h: ML300 specific config options
- *
- * http://www.xilinx.com/ml300
- *
- * Derived from : ML2.h
- *
- *     Author: Xilinx, Inc.
- *
- *
- *     This program is free software; you can redistribute it and/or modify it
- *     under the terms of the GNU General Public License as published by the
- *     Free Software Foundation; either version 2 of the License, or (at your
- *     option) any later version.
- *
- *
- *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
- *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
- *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
- *     OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
- *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
- *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
- *     FITNESS FOR A PARTICULAR PURPOSE.
- *
- *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
- *
- *     (c) Copyright 2002 Xilinx Inc.
- *     All rights reserved.
- *
- *
- *     You should have received a copy of the GNU General Public License along
- *     with this program; if not, write to the Free Software Foundation, Inc.,
- *     675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* #define DEBUG */
-/* #define ET_DEBUG 1 */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
-#define CONFIG_XILINX_405	1
-#define CONFIG_XILINX_ML300	1	/* ...on a Xilinx ML300 board	*/
-
-#define CONFIG_SYSTEMACE	1
-#define CONFIG_DOS_PARTITION	1
-#define CONFIG_SYS_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
-#define CONFIG_SYS_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
-
-#define CONFIG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
-
-/* following are used only if env is in EEPROM */
-#ifdef	CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
-#define CONFIG_MISC_INIT_R	1	/* used to call out convert_env() */
-#define CONFIG_ENV_OVERWRITE	1	/* allow users to update ethaddr and serial# */
-#endif
-
-#include "../board/xilinx/ml300/xparameters.h"
-
-#define CONFIG_SYS_NO_FLASH		1	/* no flash */
-#define CONFIG_ENV_SIZE		XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-
-#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command	*/
-
-#define CONFIG_BOOTARGS		"console=ttyS0,9600 ip=off " \
-				"root=/dev/xsysace/disc0/part3 rw"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_NET
-
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_IMLS
-
-
-/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
-/* 300000000 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt	*/
-
-#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size	*/
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_DUART_CHAN		0
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_INIT_CHAN1	 1
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MONITOR_BASE	0x04000000
-#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR	0x800000  /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_END	0x2000	  /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	128	  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot			*/
-
-#endif				/* __CONFIG_H */

include/configs/otc570.h

@@ -102,6 +102,7 @@
 	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
 	at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \
 }
+#define I2C_SOFT_DECLARATIONS
 /* Configure data pin as output */
 #define I2C_ACTIVE		at91_set_pio_output(AT91_PIO_PORTB, 4, 0)
 /* Configure data pin as input */

include/ppc440.h

@@ -68,6 +68,12 @@
 #define CPR0_SPCID	0x0120
 #define CPR0_ICFG	0x0140
 
+/* 440EPX boot strap options */
+#define BOOT_STRAP_OPTION_A	0x00000000
+#define BOOT_STRAP_OPTION_B	0x00000001
+#define BOOT_STRAP_OPTION_D	0x00000003
+#define BOOT_STRAP_OPTION_E	0x00000004
+
 /* 440gx sdr register definations */
 #define SDR0_SDSTP0	0x0020	    /* */
 #define SDR0_SDSTP1	0x0021	    /* */

tools/mkimage.c

@@ -37,6 +37,7 @@ struct mkimage_params params = {
 	.type = IH_TYPE_KERNEL,
 	.comp = IH_COMP_GZIP,
 	.dtc = MKIMAGE_DEFAULT_DTC_OPTIONS,
+	.imagename = "",
 };
 
 /*