iwl-shared.h 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361
  1. /******************************************************************************
  2. *
  3. * This file is provided under a dual BSD/GPLv2 license. When using or
  4. * redistributing this file, you may do so under either license.
  5. *
  6. * GPL LICENSE SUMMARY
  7. *
  8. * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of version 2 of the GNU General Public License as
  12. * published by the Free Software Foundation.
  13. *
  14. * This program is distributed in the hope that it will be useful, but
  15. * WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17. * General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22. * USA
  23. *
  24. * The full GNU General Public License is included in this distribution
  25. * in the file called LICENSE.GPL.
  26. *
  27. * Contact Information:
  28. * Intel Linux Wireless <ilw@linux.intel.com>
  29. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30. *
  31. * BSD LICENSE
  32. *
  33. * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
  34. * All rights reserved.
  35. *
  36. * Redistribution and use in source and binary forms, with or without
  37. * modification, are permitted provided that the following conditions
  38. * are met:
  39. *
  40. * * Redistributions of source code must retain the above copyright
  41. * notice, this list of conditions and the following disclaimer.
  42. * * Redistributions in binary form must reproduce the above copyright
  43. * notice, this list of conditions and the following disclaimer in
  44. * the documentation and/or other materials provided with the
  45. * distribution.
  46. * * Neither the name Intel Corporation nor the names of its
  47. * contributors may be used to endorse or promote products derived
  48. * from this software without specific prior written permission.
  49. *
  50. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53. * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54. * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55. * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56. * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57. * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58. * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59. * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60. * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61. *
  62. *****************************************************************************/
  63. #ifndef __iwl_shared_h__
  64. #define __iwl_shared_h__
  65. #include <linux/types.h>
  66. #include <linux/spinlock.h>
  67. #include <linux/mutex.h>
  68. #include <linux/gfp.h>
  69. #include "iwl-commands.h"
  70. /*This files includes all the types / functions that are exported by the
  71. * upper layer to the bus and transport layer */
  72. struct iwl_cfg;
  73. struct iwl_bus;
  74. struct iwl_priv;
  75. struct iwl_sensitivity_ranges;
  76. struct iwl_trans_ops;
  77. #define DRV_NAME "iwlagn"
  78. #define IWLWIFI_VERSION "in-tree:"
  79. #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
  80. #define DRV_AUTHOR "<ilw@linux.intel.com>"
  81. extern struct iwl_mod_params iwlagn_mod_params;
  82. /**
  83. * struct iwl_mod_params
  84. * @sw_crypto: using hardware encryption, default = 0
  85. * @num_of_queues: number of tx queue, HW dependent
  86. * @disable_11n: 11n capabilities enabled, default = 0
  87. * @amsdu_size_8K: enable 8K amsdu size, default = 1
  88. * @antenna: both antennas (use diversity), default = 0
  89. * @restart_fw: restart firmware, default = 1
  90. * @plcp_check: enable plcp health check, default = true
  91. * @ack_check: disable ack health check, default = false
  92. * @wd_disable: enable stuck queue check, default = false
  93. * @bt_coex_active: enable bt coex, default = true
  94. * @led_mode: system default, default = 0
  95. * @no_sleep_autoadjust: disable autoadjust, default = true
  96. * @power_save: disable power save, default = false
  97. * @power_level: power level, default = 1
  98. * @debug_level: levels are IWL_DL_*
  99. * @ant_coupling: antenna coupling in dB, default = 0
  100. * @bt_ch_announce: BT channel inhibition, default = enable
  101. * @wanted_ucode_alternative: ucode alternative to use, default = 1
  102. * @auto_agg: enable agg. without check, default = true
  103. */
  104. struct iwl_mod_params {
  105. int sw_crypto;
  106. int num_of_queues;
  107. int disable_11n;
  108. int amsdu_size_8K;
  109. int antenna;
  110. int restart_fw;
  111. bool plcp_check;
  112. bool ack_check;
  113. bool wd_disable;
  114. bool bt_coex_active;
  115. int led_mode;
  116. bool no_sleep_autoadjust;
  117. bool power_save;
  118. int power_level;
  119. u32 debug_level;
  120. int ant_coupling;
  121. bool bt_ch_announce;
  122. int wanted_ucode_alternative;
  123. bool auto_agg;
  124. };
  125. /**
  126. * struct iwl_hw_params
  127. * @max_txq_num: Max # Tx queues supported
  128. * @num_ampdu_queues: num of ampdu queues
  129. * @tx/rx_chains_num: Number of TX/RX chains
  130. * @valid_tx/rx_ant: usable antennas
  131. * @max_stations:
  132. * @ht40_channel: is 40MHz width possible in band 2.4
  133. * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
  134. * @sku:
  135. * @rx_page_order: Rx buffer page order
  136. * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
  137. * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
  138. * @sw_crypto: 0 for hw, 1 for sw
  139. * @max_xxx_size: for ucode uses
  140. * @ct_kill_threshold: temperature threshold
  141. * @calib_init_cfg: setup initial calibrations for the hw
  142. * @calib_rt_cfg: setup runtime calibrations for the hw
  143. * @struct iwl_sensitivity_ranges: range of sensitivity values
  144. */
  145. struct iwl_hw_params {
  146. u8 max_txq_num;
  147. u8 num_ampdu_queues;
  148. u8 tx_chains_num;
  149. u8 rx_chains_num;
  150. u8 valid_tx_ant;
  151. u8 valid_rx_ant;
  152. u8 max_stations;
  153. u8 ht40_channel;
  154. bool shadow_reg_enable;
  155. u16 beacon_time_tsf_bits;
  156. u16 sku;
  157. u32 rx_page_order;
  158. u32 max_inst_size;
  159. u32 max_data_size;
  160. u32 ct_kill_threshold; /* value in hw-dependent units */
  161. u32 ct_kill_exit_threshold; /* value in hw-dependent units */
  162. /* for 1000, 6000 series and up */
  163. u32 calib_init_cfg;
  164. u32 calib_rt_cfg;
  165. const struct iwl_sensitivity_ranges *sens;
  166. };
  167. /**
  168. * struct iwl_ht_agg - aggregation status while waiting for block-ack
  169. * @txq_id: Tx queue used for Tx attempt
  170. * @wait_for_ba: Expect block-ack before next Tx reply
  171. * @rate_n_flags: Rate at which Tx was attempted
  172. *
  173. * If REPLY_TX indicates that aggregation was attempted, driver must wait
  174. * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info
  175. * until block ack arrives.
  176. */
  177. struct iwl_ht_agg {
  178. u16 txq_id;
  179. u16 wait_for_ba;
  180. u32 rate_n_flags;
  181. #define IWL_AGG_OFF 0
  182. #define IWL_AGG_ON 1
  183. #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
  184. #define IWL_EMPTYING_HW_QUEUE_DELBA 3
  185. u8 state;
  186. u8 tx_fifo;
  187. };
  188. struct iwl_tid_data {
  189. u16 seq_number; /* agn only */
  190. u16 tfds_in_queue;
  191. struct iwl_ht_agg agg;
  192. };
  193. /**
  194. * struct iwl_shared - shared fields for all the layers of the driver
  195. *
  196. * @dbg_level_dev: dbg level set per device. Prevails on
  197. * iwlagn_mod_params.debug_level if set (!= 0)
  198. * @ucode_owner: IWL_OWNERSHIP_*
  199. * @cmd_queue: command queue number
  200. * @status: STATUS_*
  201. * @bus: pointer to the bus layer data
  202. * @priv: pointer to the upper layer data
  203. * @hw_params: see struct iwl_hw_params
  204. * @workqueue: the workqueue used by all the layers of the driver
  205. * @lock: protect general shared data
  206. * @sta_lock: protects the station table.
  207. * If lock and sta_lock are needed, lock must be acquired first.
  208. * @mutex:
  209. */
  210. struct iwl_shared {
  211. #ifdef CONFIG_IWLWIFI_DEBUG
  212. u32 dbg_level_dev;
  213. #endif /* CONFIG_IWLWIFI_DEBUG */
  214. #define IWL_OWNERSHIP_DRIVER 0
  215. #define IWL_OWNERSHIP_TM 1
  216. u8 ucode_owner;
  217. u8 cmd_queue;
  218. unsigned long status;
  219. bool wowlan;
  220. struct iwl_bus *bus;
  221. struct iwl_priv *priv;
  222. struct iwl_trans *trans;
  223. struct iwl_hw_params hw_params;
  224. struct workqueue_struct *workqueue;
  225. spinlock_t lock;
  226. spinlock_t sta_lock;
  227. struct mutex mutex;
  228. struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT];
  229. };
  230. /*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */
  231. #define priv(_m) ((_m)->shrd->priv)
  232. #define bus(_m) ((_m)->shrd->bus)
  233. #define trans(_m) ((_m)->shrd->trans)
  234. #define hw_params(_m) ((_m)->shrd->hw_params)
  235. #ifdef CONFIG_IWLWIFI_DEBUG
  236. /*
  237. * iwl_get_debug_level: Return active debug level for device
  238. *
  239. * Using sysfs it is possible to set per device debug level. This debug
  240. * level will be used if set, otherwise the global debug level which can be
  241. * set via module parameter is used.
  242. */
  243. static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
  244. {
  245. if (shrd->dbg_level_dev)
  246. return shrd->dbg_level_dev;
  247. else
  248. return iwlagn_mod_params.debug_level;
  249. }
  250. #else
  251. static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
  252. {
  253. return iwlagn_mod_params.debug_level;
  254. }
  255. #endif
  256. static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page)
  257. {
  258. free_pages(page, shrd->hw_params.rx_page_order);
  259. }
  260. struct iwl_rx_mem_buffer {
  261. dma_addr_t page_dma;
  262. struct page *page;
  263. struct list_head list;
  264. };
  265. #define rxb_addr(r) page_address(r->page)
  266. #ifdef CONFIG_PM
  267. int iwl_suspend(struct iwl_priv *priv);
  268. int iwl_resume(struct iwl_priv *priv);
  269. #endif /* !CONFIG_PM */
  270. int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
  271. struct iwl_cfg *cfg);
  272. void __devexit iwl_remove(struct iwl_priv * priv);
  273. /*****************************************************
  274. * DRIVER STATUS FUNCTIONS
  275. ******************************************************/
  276. #define STATUS_HCMD_ACTIVE 0 /* host command in progress */
  277. /* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
  278. #define STATUS_INT_ENABLED 2
  279. #define STATUS_RF_KILL_HW 3
  280. #define STATUS_CT_KILL 4
  281. #define STATUS_INIT 5
  282. #define STATUS_ALIVE 6
  283. #define STATUS_READY 7
  284. #define STATUS_TEMPERATURE 8
  285. #define STATUS_GEO_CONFIGURED 9
  286. #define STATUS_EXIT_PENDING 10
  287. #define STATUS_STATISTICS 12
  288. #define STATUS_SCANNING 13
  289. #define STATUS_SCAN_ABORTING 14
  290. #define STATUS_SCAN_HW 15
  291. #define STATUS_POWER_PMI 16
  292. #define STATUS_FW_ERROR 17
  293. #define STATUS_DEVICE_ENABLED 18
  294. #define STATUS_CHANNEL_SWITCH_PENDING 19
  295. static inline int iwl_is_ready(struct iwl_shared *shrd)
  296. {
  297. /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
  298. * set but EXIT_PENDING is not */
  299. return test_bit(STATUS_READY, &shrd->status) &&
  300. test_bit(STATUS_GEO_CONFIGURED, &shrd->status) &&
  301. !test_bit(STATUS_EXIT_PENDING, &shrd->status);
  302. }
  303. static inline int iwl_is_alive(struct iwl_shared *shrd)
  304. {
  305. return test_bit(STATUS_ALIVE, &shrd->status);
  306. }
  307. static inline int iwl_is_init(struct iwl_shared *shrd)
  308. {
  309. return test_bit(STATUS_INIT, &shrd->status);
  310. }
  311. static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd)
  312. {
  313. return test_bit(STATUS_RF_KILL_HW, &shrd->status);
  314. }
  315. static inline int iwl_is_rfkill(struct iwl_shared *shrd)
  316. {
  317. return iwl_is_rfkill_hw(shrd);
  318. }
  319. static inline int iwl_is_ctkill(struct iwl_shared *shrd)
  320. {
  321. return test_bit(STATUS_CT_KILL, &shrd->status);
  322. }
  323. static inline int iwl_is_ready_rf(struct iwl_shared *shrd)
  324. {
  325. if (iwl_is_rfkill(shrd))
  326. return 0;
  327. return iwl_is_ready(shrd);
  328. }
  329. #endif /* #__iwl_shared_h__ */