| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- /*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace. The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
- #ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H
- #define __ASM_GALILEO_BOARDS_MIPS_EV64120_H
- /*
- * GT64120 config space base address
- */
- extern unsigned long gt64120_base;
- #define GT64120_BASE (gt64120_base)
- /*
- * PCI Bus allocation
- */
- #define GT_PCI_MEM_BASE 0x12000000UL
- #define GT_PCI_MEM_SIZE 0x02000000UL
- #define GT_PCI_IO_BASE 0x10000000UL
- #define GT_PCI_IO_SIZE 0x02000000UL
- #define GT_ISA_IO_BASE PCI_IO_BASE
- /*
- * Duart I/O ports.
- */
- #define EV64120_COM1_BASE_ADDR (0x1d000000 + 0x20)
- #define EV64120_COM2_BASE_ADDR (0x1d000000 + 0x00)
- /*
- * EV64120 interrupt controller register base.
- */
- #define EV64120_ICTRL_REGS_BASE (KSEG1ADDR(0x1f000000))
- /*
- * EV64120 UART register base.
- */
- #define EV64120_UART0_REGS_BASE (KSEG1ADDR(EV64120_COM1_BASE_ADDR))
- #define EV64120_UART1_REGS_BASE (KSEG1ADDR(EV64120_COM2_BASE_ADDR))
- #define EV64120_BASE_BAUD ( 3686400 / 16 )
- #define EV64120_UART_IRQ 6
- /*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
- * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
- * boards, they all either come in on IntD or they all come in on IntA, they
- * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
- * "requested" interrupt numbers and go through the list whenever we get an
- * IntA/D.
- *
- * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
- * INTD is 11.
- */
- #define GT_TIMER 4
- #define GT_INTA 2
- #define GT_INTD 5
- #endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */
|
