mpc7448_hpc2.c 7.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308
  1. /*
  2. * mpc7448_hpc2.c
  3. *
  4. * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
  5. *
  6. * Author: Jacob Pan
  7. * jacob.pan@freescale.com
  8. * Author: Xianghua Xiao
  9. * x.xiao@freescale.com
  10. * Maintainer: Roy Zang <tie-fei.zang@freescale.com>
  11. * Add Flat Device Tree support fot mpc7448hpc2 board
  12. *
  13. * Copyright 2004-2006 Freescale Semiconductor, Inc.
  14. *
  15. * This program is free software; you can redistribute it and/or
  16. * modify it under the terms of the GNU General Public License
  17. * as published by the Free Software Foundation; either version
  18. * 2 of the License, or (at your option) any later version.
  19. */
  20. #include <linux/stddef.h>
  21. #include <linux/kernel.h>
  22. #include <linux/pci.h>
  23. #include <linux/kdev_t.h>
  24. #include <linux/console.h>
  25. #include <linux/delay.h>
  26. #include <linux/irq.h>
  27. #include <linux/ide.h>
  28. #include <linux/seq_file.h>
  29. #include <linux/root_dev.h>
  30. #include <linux/serial.h>
  31. #include <linux/tty.h>
  32. #include <linux/serial_core.h>
  33. #include <asm/system.h>
  34. #include <asm/time.h>
  35. #include <asm/machdep.h>
  36. #include <asm/prom.h>
  37. #include <asm/udbg.h>
  38. #include <asm/tsi108.h>
  39. #include <asm/pci-bridge.h>
  40. #include <asm/reg.h>
  41. #include <mm/mmu_decl.h>
  42. #include "mpc7448_hpc2.h"
  43. #include <asm/tsi108_irq.h>
  44. #include <asm/mpic.h>
  45. #undef DEBUG
  46. #ifdef DEBUG
  47. #define DBG(fmt...) do { printk(fmt); } while(0)
  48. #else
  49. #define DBG(fmt...) do { } while(0)
  50. #endif
  51. #ifndef CONFIG_PCI
  52. isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
  53. isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
  54. pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
  55. #endif
  56. extern int tsi108_setup_pci(struct device_node *dev);
  57. extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
  58. extern void tsi108_pci_int_init(void);
  59. extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
  60. int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
  61. {
  62. if (bus == 0 && PCI_SLOT(devfn) == 0)
  63. return PCIBIOS_DEVICE_NOT_FOUND;
  64. else
  65. return PCIBIOS_SUCCESSFUL;
  66. }
  67. /*
  68. * find pci slot by devfn in interrupt map of OF tree
  69. */
  70. u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn)
  71. {
  72. int i;
  73. unsigned int tmp;
  74. for (i = 0; i < 4; i++){
  75. tmp = interrupt_map[i*4*7];
  76. if ((tmp >> 11) == (devfn >> 3))
  77. return i;
  78. }
  79. return i;
  80. }
  81. /*
  82. * Scans the interrupt map for pci device
  83. */
  84. void mpc7448_hpc2_fixup_irq(struct pci_dev *dev)
  85. {
  86. struct pci_controller *hose;
  87. struct device_node *node;
  88. const unsigned int *interrupt;
  89. int busnr;
  90. int len;
  91. u8 slot;
  92. u8 pin;
  93. /* Lookup the hose */
  94. busnr = dev->bus->number;
  95. hose = pci_bus_to_hose(busnr);
  96. if (!hose)
  97. printk(KERN_ERR "No pci hose found\n");
  98. /* Check it has an OF node associated */
  99. node = (struct device_node *) hose->arch_data;
  100. if (!node)
  101. printk(KERN_ERR "No pci node found\n");
  102. interrupt = get_property(node, "interrupt-map", &len);
  103. slot = find_slot_by_devfn(interrupt, dev->devfn);
  104. pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
  105. if (pin == 0 || pin > 4)
  106. pin = 1;
  107. pin--;
  108. dev->irq = interrupt[slot*4*7 + pin*7 + 5];
  109. DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq);
  110. }
  111. /* temporary pci irq map fixup*/
  112. void __init mpc7448_hpc2_pcibios_fixup(void)
  113. {
  114. struct pci_dev *dev = NULL;
  115. for_each_pci_dev(dev) {
  116. mpc7448_hpc2_fixup_irq(dev);
  117. pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  118. }
  119. }
  120. static void __init mpc7448_hpc2_setup_arch(void)
  121. {
  122. struct device_node *cpu;
  123. struct device_node *np;
  124. if (ppc_md.progress)
  125. ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
  126. cpu = of_find_node_by_type(NULL, "cpu");
  127. if (cpu != 0) {
  128. const unsigned int *fp;
  129. fp = get_property(cpu, "clock-frequency", NULL);
  130. if (fp != 0)
  131. loops_per_jiffy = *fp / HZ;
  132. else
  133. loops_per_jiffy = 50000000 / HZ;
  134. of_node_put(cpu);
  135. }
  136. tsi108_csr_vir_base = get_vir_csrbase();
  137. #ifdef CONFIG_ROOT_NFS
  138. ROOT_DEV = Root_NFS;
  139. #else
  140. ROOT_DEV = Root_HDA1;
  141. #endif
  142. #ifdef CONFIG_BLK_DEV_INITRD
  143. ROOT_DEV = Root_RAM0;
  144. #endif
  145. /* setup PCI host bridge */
  146. #ifdef CONFIG_PCI
  147. for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
  148. tsi108_setup_pci(np);
  149. ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
  150. if (ppc_md.progress)
  151. ppc_md.progress("tsi108: resources set", 0x100);
  152. #endif
  153. printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
  154. printk(KERN_INFO
  155. "Jointly ported by Freescale and Tundra Semiconductor\n");
  156. printk(KERN_INFO
  157. "Enabling L2 cache then enabling the HID0 prefetch engine.\n");
  158. }
  159. /*
  160. * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come
  161. * from the four external INT pins, PCI interrupts are routed via
  162. * PCI interrupt control registers, it generates internal IRQ23
  163. *
  164. * Interrupt routing on the Taiga Board:
  165. * TSI108:PB_INT[0] -> CPU0:INT#
  166. * TSI108:PB_INT[1] -> CPU0:MCP#
  167. * TSI108:PB_INT[2] -> N/C
  168. * TSI108:PB_INT[3] -> N/C
  169. */
  170. static void __init mpc7448_hpc2_init_IRQ(void)
  171. {
  172. struct mpic *mpic;
  173. phys_addr_t mpic_paddr = 0;
  174. unsigned int cascade_pci_irq;
  175. struct device_node *tsi_pci;
  176. struct device_node *tsi_pic;
  177. tsi_pic = of_find_node_by_type(NULL, "open-pic");
  178. if (tsi_pic) {
  179. unsigned int size;
  180. const void *prop = get_property(tsi_pic, "reg", &size);
  181. mpic_paddr = of_translate_address(tsi_pic, prop);
  182. }
  183. if (mpic_paddr == 0) {
  184. printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
  185. return;
  186. }
  187. DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
  188. (u32) mpic_paddr);
  189. mpic = mpic_alloc(tsi_pic, mpic_paddr,
  190. MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
  191. MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
  192. 0, /* num_sources used */
  193. 0, /* num_sources used */
  194. "Tsi108_PIC");
  195. BUG_ON(mpic == NULL); /* XXXX */
  196. mpic_init(mpic);
  197. tsi_pci = of_find_node_by_type(NULL, "pci");
  198. if (tsi_pci == 0) {
  199. printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
  200. return;
  201. }
  202. cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
  203. set_irq_data(cascade_pci_irq, mpic);
  204. set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
  205. tsi108_pci_int_init();
  206. /* Configure MPIC outputs to CPU0 */
  207. tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
  208. of_node_put(tsi_pic);
  209. }
  210. void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
  211. {
  212. seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
  213. seq_printf(m, "machine\t\t: MPC7448hpc2\n");
  214. }
  215. void mpc7448_hpc2_restart(char *cmd)
  216. {
  217. local_irq_disable();
  218. /* Set exception prefix high - to the firmware */
  219. _nmask_and_or_msr(0, MSR_IP);
  220. for (;;) ; /* Spin until reset happens */
  221. }
  222. void mpc7448_hpc2_power_off(void)
  223. {
  224. local_irq_disable();
  225. for (;;) ; /* No way to shut power off with software */
  226. }
  227. void mpc7448_hpc2_halt(void)
  228. {
  229. mpc7448_hpc2_power_off();
  230. }
  231. /*
  232. * Called very early, device-tree isn't unflattened
  233. */
  234. static int __init mpc7448_hpc2_probe(void)
  235. {
  236. unsigned long root = of_get_flat_dt_root();
  237. if (!of_flat_dt_is_compatible(root, "mpc74xx"))
  238. return 0;
  239. return 1;
  240. }
  241. static int mpc7448_machine_check_exception(struct pt_regs *regs)
  242. {
  243. extern void tsi108_clear_pci_cfg_error(void);
  244. const struct exception_table_entry *entry;
  245. /* Are we prepared to handle this fault */
  246. if ((entry = search_exception_tables(regs->nip)) != NULL) {
  247. tsi108_clear_pci_cfg_error();
  248. regs->msr |= MSR_RI;
  249. regs->nip = entry->fixup;
  250. return 1;
  251. }
  252. return 0;
  253. }
  254. define_machine(mpc7448_hpc2){
  255. .name = "MPC7448 HPC2",
  256. .probe = mpc7448_hpc2_probe,
  257. .setup_arch = mpc7448_hpc2_setup_arch,
  258. .init_IRQ = mpc7448_hpc2_init_IRQ,
  259. .show_cpuinfo = mpc7448_hpc2_show_cpuinfo,
  260. .get_irq = mpic_get_irq,
  261. .pcibios_fixup = mpc7448_hpc2_pcibios_fixup,
  262. .restart = mpc7448_hpc2_restart,
  263. .calibrate_decr = generic_calibrate_decr,
  264. .machine_check_exception= mpc7448_machine_check_exception,
  265. .progress = udbg_progress,
  266. };