sbp2.h 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351
  1. /*
  2. * sbp2.h - Defines and prototypes for sbp2.c
  3. *
  4. * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
  5. * jamesg@filanet.com
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License as published by
  9. * the Free Software Foundation; either version 2 of the License, or
  10. * (at your option) any later version.
  11. *
  12. * This program is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15. * GNU General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software Foundation,
  19. * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20. */
  21. #ifndef SBP2_H
  22. #define SBP2_H
  23. #define SBP2_DEVICE_NAME "sbp2"
  24. /*
  25. * SBP-2 specific definitions
  26. */
  27. #define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
  28. #define ORB_DIRECTION_READ_FROM_MEDIA 0x1
  29. #define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
  30. #define ORB_SET_NULL_PTR(v) (((v) & 0x1) << 31)
  31. #define ORB_SET_NOTIFY(v) (((v) & 0x1) << 31)
  32. #define ORB_SET_RQ_FMT(v) (((v) & 0x3) << 29)
  33. #define ORB_SET_NODE_ID(v) (((v) & 0xffff) << 16)
  34. #define ORB_SET_STATUS_FIFO_HI(v, id) ((v) >> 32 | ORB_SET_NODE_ID(id))
  35. #define ORB_SET_STATUS_FIFO_LO(v) ((v) & 0xffffffff)
  36. #define ORB_SET_DATA_SIZE(v) ((v) & 0xffff)
  37. #define ORB_SET_PAGE_SIZE(v) (((v) & 0x7) << 16)
  38. #define ORB_SET_PAGE_TABLE_PRESENT(v) (((v) & 0x1) << 19)
  39. #define ORB_SET_MAX_PAYLOAD(v) (((v) & 0xf) << 20)
  40. #define ORB_SET_SPEED(v) (((v) & 0x7) << 24)
  41. #define ORB_SET_DIRECTION(v) (((v) & 0x1) << 27)
  42. struct sbp2_command_orb {
  43. u32 next_ORB_hi;
  44. u32 next_ORB_lo;
  45. u32 data_descriptor_hi;
  46. u32 data_descriptor_lo;
  47. u32 misc;
  48. u8 cdb[12];
  49. } __attribute__((packed));
  50. #define SBP2_LOGIN_REQUEST 0x0
  51. #define SBP2_QUERY_LOGINS_REQUEST 0x1
  52. #define SBP2_RECONNECT_REQUEST 0x3
  53. #define SBP2_SET_PASSWORD_REQUEST 0x4
  54. #define SBP2_LOGOUT_REQUEST 0x7
  55. #define SBP2_ABORT_TASK_REQUEST 0xb
  56. #define SBP2_ABORT_TASK_SET 0xc
  57. #define SBP2_LOGICAL_UNIT_RESET 0xe
  58. #define SBP2_TARGET_RESET_REQUEST 0xf
  59. #define ORB_SET_LUN(v) ((v) & 0xffff)
  60. #define ORB_SET_FUNCTION(v) (((v) & 0xf) << 16)
  61. #define ORB_SET_RECONNECT(v) (((v) & 0xf) << 20)
  62. #define ORB_SET_EXCLUSIVE(v) ((v) ? 1 << 28 : 0)
  63. #define ORB_SET_LOGIN_RESP_LENGTH(v) ((v) & 0xffff)
  64. #define ORB_SET_PASSWD_LENGTH(v) (((v) & 0xffff) << 16)
  65. struct sbp2_login_orb {
  66. u32 password_hi;
  67. u32 password_lo;
  68. u32 login_response_hi;
  69. u32 login_response_lo;
  70. u32 lun_misc;
  71. u32 passwd_resp_lengths;
  72. u32 status_fifo_hi;
  73. u32 status_fifo_lo;
  74. } __attribute__((packed));
  75. #define RESPONSE_GET_LOGIN_ID(v) ((v) & 0xffff)
  76. #define RESPONSE_GET_LENGTH(v) (((v) >> 16) & 0xffff)
  77. #define RESPONSE_GET_RECONNECT_HOLD(v) ((v) & 0xffff)
  78. struct sbp2_login_response {
  79. u32 length_login_ID;
  80. u32 command_block_agent_hi;
  81. u32 command_block_agent_lo;
  82. u32 reconnect_hold;
  83. } __attribute__((packed));
  84. #define ORB_SET_LOGIN_ID(v) ((v) & 0xffff)
  85. #define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
  86. struct sbp2_query_logins_orb {
  87. u32 reserved1;
  88. u32 reserved2;
  89. u32 query_response_hi;
  90. u32 query_response_lo;
  91. u32 lun_misc;
  92. u32 reserved_resp_length;
  93. u32 status_fifo_hi;
  94. u32 status_fifo_lo;
  95. } __attribute__((packed));
  96. #define RESPONSE_GET_MAX_LOGINS(v) ((v) & 0xffff)
  97. #define RESPONSE_GET_ACTIVE_LOGINS(v) ((RESPONSE_GET_LENGTH((v)) - 4) / 12)
  98. struct sbp2_query_logins_response {
  99. u32 length_max_logins;
  100. u32 misc_IDs;
  101. u32 initiator_misc_hi;
  102. u32 initiator_misc_lo;
  103. } __attribute__((packed));
  104. struct sbp2_reconnect_orb {
  105. u32 reserved1;
  106. u32 reserved2;
  107. u32 reserved3;
  108. u32 reserved4;
  109. u32 login_ID_misc;
  110. u32 reserved5;
  111. u32 status_fifo_hi;
  112. u32 status_fifo_lo;
  113. } __attribute__((packed));
  114. struct sbp2_logout_orb {
  115. u32 reserved1;
  116. u32 reserved2;
  117. u32 reserved3;
  118. u32 reserved4;
  119. u32 login_ID_misc;
  120. u32 reserved5;
  121. u32 status_fifo_hi;
  122. u32 status_fifo_lo;
  123. } __attribute__((packed));
  124. #define PAGE_TABLE_SET_SEGMENT_BASE_HI(v) ((v) & 0xffff)
  125. #define PAGE_TABLE_SET_SEGMENT_LENGTH(v) (((v) & 0xffff) << 16)
  126. struct sbp2_unrestricted_page_table {
  127. u32 length_segment_base_hi;
  128. u32 segment_base_lo;
  129. } __attribute__((packed));
  130. #define RESP_STATUS_REQUEST_COMPLETE 0x0
  131. #define RESP_STATUS_TRANSPORT_FAILURE 0x1
  132. #define RESP_STATUS_ILLEGAL_REQUEST 0x2
  133. #define RESP_STATUS_VENDOR_DEPENDENT 0x3
  134. #define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0
  135. #define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1
  136. #define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2
  137. #define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3
  138. #define SBP2_STATUS_ACCESS_DENIED 0x4
  139. #define SBP2_STATUS_LU_NOT_SUPPORTED 0x5
  140. #define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6
  141. #define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8
  142. #define SBP2_STATUS_FUNCTION_REJECTED 0x9
  143. #define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa
  144. #define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb
  145. #define SBP2_STATUS_REQUEST_ABORTED 0xc
  146. #define SBP2_STATUS_UNSPECIFIED_ERROR 0xff
  147. #define SFMT_CURRENT_ERROR 0x0
  148. #define SFMT_DEFERRED_ERROR 0x1
  149. #define SFMT_VENDOR_DEPENDENT_STATUS 0x3
  150. #define STATUS_GET_SRC(v) (((v) >> 30) & 0x3)
  151. #define STATUS_GET_RESP(v) (((v) >> 28) & 0x3)
  152. #define STATUS_GET_LEN(v) (((v) >> 24) & 0x7)
  153. #define STATUS_GET_SBP_STATUS(v) (((v) >> 16) & 0xff)
  154. #define STATUS_GET_ORB_OFFSET_HI(v) ((v) & 0x0000ffff)
  155. #define STATUS_TEST_DEAD(v) ((v) & 0x08000000)
  156. /* test 'resp' | 'dead' | 'sbp2_status' */
  157. #define STATUS_TEST_RDS(v) ((v) & 0x38ff0000)
  158. struct sbp2_status_block {
  159. u32 ORB_offset_hi_misc;
  160. u32 ORB_offset_lo;
  161. u8 command_set_dependent[24];
  162. } __attribute__((packed));
  163. /*
  164. * SBP2 related configuration ROM definitions
  165. */
  166. #define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
  167. #define SBP2_CSR_OFFSET_KEY 0x54
  168. #define SBP2_UNIT_SPEC_ID_KEY 0x12
  169. #define SBP2_UNIT_SW_VERSION_KEY 0x13
  170. #define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38
  171. #define SBP2_COMMAND_SET_KEY 0x39
  172. #define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a
  173. #define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14
  174. #define SBP2_FIRMWARE_REVISION_KEY 0x3c
  175. #define SBP2_AGENT_STATE_OFFSET 0x00ULL
  176. #define SBP2_AGENT_RESET_OFFSET 0x04ULL
  177. #define SBP2_ORB_POINTER_OFFSET 0x08ULL
  178. #define SBP2_DOORBELL_OFFSET 0x10ULL
  179. #define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL
  180. #define SBP2_UNSOLICITED_STATUS_VALUE 0xf
  181. #define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
  182. /* biggest possible value for Single Phase Retry count is 0xf */
  183. #define SBP2_BUSY_TIMEOUT_VALUE 0xf
  184. #define SBP2_AGENT_RESET_DATA 0xf
  185. #define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
  186. #define SBP2_SW_VERSION_ENTRY 0x00010483
  187. /*
  188. * SCSI specific definitions
  189. */
  190. #define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
  191. /* There is no real limitation of the queue depth (i.e. length of the linked
  192. * list of command ORBs) at the target. The chosen depth is merely an
  193. * implementation detail of the sbp2 driver. */
  194. #define SBP2_MAX_CMDS 8
  195. #define SBP2_SCSI_STATUS_GOOD 0x0
  196. #define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2
  197. #define SBP2_SCSI_STATUS_CONDITION_MET 0x4
  198. #define SBP2_SCSI_STATUS_BUSY 0x8
  199. #define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18
  200. #define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
  201. #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
  202. /*
  203. * Representations of commands and devices
  204. */
  205. enum sbp2_dma_types {
  206. CMD_DMA_NONE,
  207. CMD_DMA_PAGE,
  208. CMD_DMA_SINGLE
  209. };
  210. /* Per SCSI command */
  211. struct sbp2_command_info {
  212. struct list_head list;
  213. struct sbp2_command_orb command_orb;
  214. dma_addr_t command_orb_dma;
  215. struct scsi_cmnd *Current_SCpnt;
  216. void (*Current_done)(struct scsi_cmnd *);
  217. /* Also need s/g structure for each sbp2 command */
  218. struct sbp2_unrestricted_page_table
  219. scatter_gather_element[SG_ALL] __attribute__((aligned(8)));
  220. dma_addr_t sge_dma;
  221. void *sge_buffer;
  222. dma_addr_t cmd_dma;
  223. enum sbp2_dma_types dma_type;
  224. unsigned long dma_size;
  225. enum dma_data_direction dma_dir;
  226. };
  227. /* Per FireWire host */
  228. struct sbp2_fwhost_info {
  229. struct hpsb_host *host;
  230. struct list_head logical_units;
  231. };
  232. /* Per logical unit */
  233. struct sbp2_lu {
  234. /* Operation request blocks */
  235. struct sbp2_command_orb *last_orb;
  236. dma_addr_t last_orb_dma;
  237. struct sbp2_login_orb *login_orb;
  238. dma_addr_t login_orb_dma;
  239. struct sbp2_login_response *login_response;
  240. dma_addr_t login_response_dma;
  241. struct sbp2_query_logins_orb *query_logins_orb;
  242. dma_addr_t query_logins_orb_dma;
  243. struct sbp2_query_logins_response *query_logins_response;
  244. dma_addr_t query_logins_response_dma;
  245. struct sbp2_reconnect_orb *reconnect_orb;
  246. dma_addr_t reconnect_orb_dma;
  247. struct sbp2_logout_orb *logout_orb;
  248. dma_addr_t logout_orb_dma;
  249. struct sbp2_status_block status_block;
  250. /* How to talk to the unit */
  251. u64 management_agent_addr;
  252. u64 command_block_agent_addr;
  253. u32 speed_code;
  254. u32 max_payload_size;
  255. u16 lun;
  256. /* Address for the unit to write status blocks to */
  257. u64 status_fifo_addr;
  258. /* Waitqueue flag for logins, reconnects, logouts, query logins */
  259. unsigned int access_complete:1;
  260. /* Pool of command ORBs for this logical unit */
  261. spinlock_t cmd_orb_lock;
  262. struct list_head cmd_orb_inuse;
  263. struct list_head cmd_orb_completed;
  264. /* Backlink to FireWire host; list of units attached to the host */
  265. struct sbp2_fwhost_info *hi;
  266. struct list_head lu_list;
  267. /* IEEE 1394 core's device representations */
  268. struct node_entry *ne;
  269. struct unit_directory *ud;
  270. /* SCSI core's device representations */
  271. struct scsi_device *sdev;
  272. struct Scsi_Host *shost;
  273. /* Device specific workarounds/brokeness */
  274. unsigned workarounds;
  275. /* Connection state */
  276. atomic_t state;
  277. /* For deferred requests to the fetch agent */
  278. struct work_struct protocol_work;
  279. };
  280. /* For use in sbp2_lu.state */
  281. enum sbp2lu_state_types {
  282. SBP2LU_STATE_RUNNING, /* all normal */
  283. SBP2LU_STATE_IN_RESET, /* between bus reset and reconnect */
  284. SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */
  285. };
  286. /* For use in sbp2_lu.workarounds and in the corresponding
  287. * module load parameter */
  288. #define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
  289. #define SBP2_WORKAROUND_INQUIRY_36 0x2
  290. #define SBP2_WORKAROUND_MODE_SENSE_8 0x4
  291. #define SBP2_WORKAROUND_FIX_CAPACITY 0x8
  292. #define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
  293. #define SBP2_INQUIRY_DELAY 12
  294. #define SBP2_WORKAROUND_POWER_CONDITION 0x20
  295. #define SBP2_WORKAROUND_OVERRIDE 0x100
  296. #endif /* SBP2_H */