time.c 7.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329
  1. /*
  2. * Support for periodic interrupts (100 per second) and for getting
  3. * the current time from the RTC on Power Macintoshes.
  4. *
  5. * We use the decrementer register for our periodic interrupts.
  6. *
  7. * Paul Mackerras August 1996.
  8. * Copyright (C) 1996 Paul Mackerras.
  9. * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
  10. *
  11. */
  12. #include <linux/errno.h>
  13. #include <linux/sched.h>
  14. #include <linux/kernel.h>
  15. #include <linux/param.h>
  16. #include <linux/string.h>
  17. #include <linux/mm.h>
  18. #include <linux/init.h>
  19. #include <linux/time.h>
  20. #include <linux/adb.h>
  21. #include <linux/cuda.h>
  22. #include <linux/pmu.h>
  23. #include <linux/interrupt.h>
  24. #include <linux/hardirq.h>
  25. #include <linux/rtc.h>
  26. #include <asm/sections.h>
  27. #include <asm/prom.h>
  28. #include <asm/system.h>
  29. #include <asm/io.h>
  30. #include <asm/pgtable.h>
  31. #include <asm/machdep.h>
  32. #include <asm/time.h>
  33. #include <asm/nvram.h>
  34. #include <asm/smu.h>
  35. #undef DEBUG
  36. #ifdef DEBUG
  37. #define DBG(x...) printk(x)
  38. #else
  39. #define DBG(x...)
  40. #endif
  41. /* Apparently the RTC stores seconds since 1 Jan 1904 */
  42. #define RTC_OFFSET 2082844800
  43. /*
  44. * Calibrate the decrementer frequency with the VIA timer 1.
  45. */
  46. #define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
  47. /* VIA registers */
  48. #define RS 0x200 /* skip between registers */
  49. #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
  50. #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
  51. #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
  52. #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
  53. #define ACR (11*RS) /* Auxiliary control register */
  54. #define IFR (13*RS) /* Interrupt flag register */
  55. /* Bits in ACR */
  56. #define T1MODE 0xc0 /* Timer 1 mode */
  57. #define T1MODE_CONT 0x40 /* continuous interrupts */
  58. /* Bits in IFR and IER */
  59. #define T1_INT 0x40 /* Timer 1 interrupt */
  60. long __init pmac_time_init(void)
  61. {
  62. s32 delta = 0;
  63. #ifdef CONFIG_NVRAM
  64. int dst;
  65. delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
  66. delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
  67. delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
  68. if (delta & 0x00800000UL)
  69. delta |= 0xFF000000UL;
  70. dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
  71. printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
  72. dst ? "on" : "off");
  73. #endif
  74. return delta;
  75. }
  76. #if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
  77. static void to_rtc_time(unsigned long now, struct rtc_time *tm)
  78. {
  79. to_tm(now, tm);
  80. tm->tm_year -= 1900;
  81. tm->tm_mon -= 1;
  82. }
  83. #endif
  84. static unsigned long from_rtc_time(struct rtc_time *tm)
  85. {
  86. return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
  87. tm->tm_hour, tm->tm_min, tm->tm_sec);
  88. }
  89. #ifdef CONFIG_ADB_CUDA
  90. static unsigned long cuda_get_time(void)
  91. {
  92. struct adb_request req;
  93. unsigned int now;
  94. if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
  95. return 0;
  96. while (!req.complete)
  97. cuda_poll();
  98. if (req.reply_len != 7)
  99. printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
  100. req.reply_len);
  101. now = (req.reply[3] << 24) + (req.reply[4] << 16)
  102. + (req.reply[5] << 8) + req.reply[6];
  103. return ((unsigned long)now) - RTC_OFFSET;
  104. }
  105. #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm))
  106. static int cuda_set_rtc_time(struct rtc_time *tm)
  107. {
  108. unsigned int nowtime;
  109. struct adb_request req;
  110. nowtime = from_rtc_time(tm) + RTC_OFFSET;
  111. if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
  112. nowtime >> 24, nowtime >> 16, nowtime >> 8,
  113. nowtime) < 0)
  114. return -ENXIO;
  115. while (!req.complete)
  116. cuda_poll();
  117. if ((req.reply_len != 3) && (req.reply_len != 7))
  118. printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
  119. req.reply_len);
  120. return 0;
  121. }
  122. #else
  123. #define cuda_get_time() 0
  124. #define cuda_get_rtc_time(tm)
  125. #define cuda_set_rtc_time(tm) 0
  126. #endif
  127. #ifdef CONFIG_ADB_PMU
  128. static unsigned long pmu_get_time(void)
  129. {
  130. struct adb_request req;
  131. unsigned int now;
  132. if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
  133. return 0;
  134. pmu_wait_complete(&req);
  135. if (req.reply_len != 4)
  136. printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
  137. req.reply_len);
  138. now = (req.reply[0] << 24) + (req.reply[1] << 16)
  139. + (req.reply[2] << 8) + req.reply[3];
  140. return ((unsigned long)now) - RTC_OFFSET;
  141. }
  142. #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm))
  143. static int pmu_set_rtc_time(struct rtc_time *tm)
  144. {
  145. unsigned int nowtime;
  146. struct adb_request req;
  147. nowtime = from_rtc_time(tm) + RTC_OFFSET;
  148. if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
  149. nowtime >> 16, nowtime >> 8, nowtime) < 0)
  150. return -ENXIO;
  151. pmu_wait_complete(&req);
  152. if (req.reply_len != 0)
  153. printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
  154. req.reply_len);
  155. return 0;
  156. }
  157. #else
  158. #define pmu_get_time() 0
  159. #define pmu_get_rtc_time(tm)
  160. #define pmu_set_rtc_time(tm) 0
  161. #endif
  162. #ifdef CONFIG_PMAC_SMU
  163. static unsigned long smu_get_time(void)
  164. {
  165. struct rtc_time tm;
  166. if (smu_get_rtc_time(&tm, 1))
  167. return 0;
  168. return from_rtc_time(&tm);
  169. }
  170. #else
  171. #define smu_get_time() 0
  172. #define smu_get_rtc_time(tm, spin)
  173. #define smu_set_rtc_time(tm, spin) 0
  174. #endif
  175. /* Can't be __init, it's called when suspending and resuming */
  176. unsigned long pmac_get_boot_time(void)
  177. {
  178. /* Get the time from the RTC, used only at boot time */
  179. switch (sys_ctrler) {
  180. case SYS_CTRLER_CUDA:
  181. return cuda_get_time();
  182. case SYS_CTRLER_PMU:
  183. return pmu_get_time();
  184. case SYS_CTRLER_SMU:
  185. return smu_get_time();
  186. default:
  187. return 0;
  188. }
  189. }
  190. void pmac_get_rtc_time(struct rtc_time *tm)
  191. {
  192. /* Get the time from the RTC, used only at boot time */
  193. switch (sys_ctrler) {
  194. case SYS_CTRLER_CUDA:
  195. cuda_get_rtc_time(tm);
  196. break;
  197. case SYS_CTRLER_PMU:
  198. pmu_get_rtc_time(tm);
  199. break;
  200. case SYS_CTRLER_SMU:
  201. smu_get_rtc_time(tm, 1);
  202. break;
  203. default:
  204. ;
  205. }
  206. }
  207. int pmac_set_rtc_time(struct rtc_time *tm)
  208. {
  209. switch (sys_ctrler) {
  210. case SYS_CTRLER_CUDA:
  211. return cuda_set_rtc_time(tm);
  212. case SYS_CTRLER_PMU:
  213. return pmu_set_rtc_time(tm);
  214. case SYS_CTRLER_SMU:
  215. return smu_set_rtc_time(tm, 1);
  216. default:
  217. return -ENODEV;
  218. }
  219. }
  220. #ifdef CONFIG_PPC32
  221. /*
  222. * Calibrate the decrementer register using VIA timer 1.
  223. * This is used both on powermacs and CHRP machines.
  224. */
  225. int __init via_calibrate_decr(void)
  226. {
  227. struct device_node *vias;
  228. volatile unsigned char __iomem *via;
  229. int count = VIA_TIMER_FREQ_6 / 100;
  230. unsigned int dstart, dend;
  231. struct resource rsrc;
  232. vias = of_find_node_by_name(NULL, "via-cuda");
  233. if (vias == 0)
  234. vias = of_find_node_by_name(NULL, "via-pmu");
  235. if (vias == 0)
  236. vias = of_find_node_by_name(NULL, "via");
  237. if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
  238. return 0;
  239. via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
  240. if (via == NULL) {
  241. printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
  242. return 0;
  243. }
  244. /* set timer 1 for continuous interrupts */
  245. out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
  246. /* set the counter to a small value */
  247. out_8(&via[T1CH], 2);
  248. /* set the latch to `count' */
  249. out_8(&via[T1LL], count);
  250. out_8(&via[T1LH], count >> 8);
  251. /* wait until it hits 0 */
  252. while ((in_8(&via[IFR]) & T1_INT) == 0)
  253. ;
  254. dstart = get_dec();
  255. /* clear the interrupt & wait until it hits 0 again */
  256. in_8(&via[T1CL]);
  257. while ((in_8(&via[IFR]) & T1_INT) == 0)
  258. ;
  259. dend = get_dec();
  260. ppc_tb_freq = (dstart - dend) * 100 / 6;
  261. iounmap(via);
  262. return 1;
  263. }
  264. #endif
  265. /*
  266. * Query the OF and get the decr frequency.
  267. */
  268. void __init pmac_calibrate_decr(void)
  269. {
  270. generic_calibrate_decr();
  271. #ifdef CONFIG_PPC32
  272. /* We assume MacRISC2 machines have correct device-tree
  273. * calibration. That's better since the VIA itself seems
  274. * to be slightly off. --BenH
  275. */
  276. if (!machine_is_compatible("MacRISC2") &&
  277. !machine_is_compatible("MacRISC3") &&
  278. !machine_is_compatible("MacRISC4"))
  279. if (via_calibrate_decr())
  280. return;
  281. /* Special case: QuickSilver G4s seem to have a badly calibrated
  282. * timebase-frequency in OF, VIA is much better on these. We should
  283. * probably implement calibration based on the KL timer on these
  284. * machines anyway... -BenH
  285. */
  286. if (machine_is_compatible("PowerMac3,5"))
  287. if (via_calibrate_decr())
  288. return;
  289. #endif
  290. }