idle.c 3.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135
  1. /*
  2. * Idle daemon for PowerPC. Idle daemon will handle any action
  3. * that needs to be taken when the system becomes idle.
  4. *
  5. * Originally written by Cort Dougan (cort@cs.nmt.edu).
  6. * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
  7. * Paul Mackerras and others.
  8. *
  9. * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
  10. *
  11. * Additional shared processor, SMT, and firmware support
  12. * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
  13. *
  14. * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
  15. *
  16. * This program is free software; you can redistribute it and/or
  17. * modify it under the terms of the GNU General Public License
  18. * as published by the Free Software Foundation; either version
  19. * 2 of the License, or (at your option) any later version.
  20. */
  21. #include <linux/sched.h>
  22. #include <linux/kernel.h>
  23. #include <linux/smp.h>
  24. #include <linux/cpu.h>
  25. #include <linux/sysctl.h>
  26. #include <linux/tick.h>
  27. #include <asm/system.h>
  28. #include <asm/processor.h>
  29. #include <asm/cputable.h>
  30. #include <asm/time.h>
  31. #include <asm/machdep.h>
  32. #include <asm/smp.h>
  33. #ifdef CONFIG_HOTPLUG_CPU
  34. #define cpu_should_die() cpu_is_offline(smp_processor_id())
  35. #else
  36. #define cpu_should_die() 0
  37. #endif
  38. static int __init powersave_off(char *arg)
  39. {
  40. ppc_md.power_save = NULL;
  41. return 0;
  42. }
  43. __setup("powersave=off", powersave_off);
  44. /*
  45. * The body of the idle task.
  46. */
  47. void cpu_idle(void)
  48. {
  49. if (ppc_md.idle_loop)
  50. ppc_md.idle_loop(); /* doesn't return */
  51. set_thread_flag(TIF_POLLING_NRFLAG);
  52. while (1) {
  53. tick_nohz_stop_sched_tick(1);
  54. while (!need_resched() && !cpu_should_die()) {
  55. ppc64_runlatch_off();
  56. if (ppc_md.power_save) {
  57. clear_thread_flag(TIF_POLLING_NRFLAG);
  58. /*
  59. * smp_mb is so clearing of TIF_POLLING_NRFLAG
  60. * is ordered w.r.t. need_resched() test.
  61. */
  62. smp_mb();
  63. local_irq_disable();
  64. /* check again after disabling irqs */
  65. if (!need_resched() && !cpu_should_die())
  66. ppc_md.power_save();
  67. local_irq_enable();
  68. set_thread_flag(TIF_POLLING_NRFLAG);
  69. } else {
  70. /*
  71. * Go into low thread priority and possibly
  72. * low power mode.
  73. */
  74. HMT_low();
  75. HMT_very_low();
  76. }
  77. }
  78. HMT_medium();
  79. ppc64_runlatch_on();
  80. tick_nohz_restart_sched_tick();
  81. if (cpu_should_die())
  82. cpu_die();
  83. preempt_enable_no_resched();
  84. schedule();
  85. preempt_disable();
  86. }
  87. }
  88. int powersave_nap;
  89. #ifdef CONFIG_SYSCTL
  90. /*
  91. * Register the sysctl to set/clear powersave_nap.
  92. */
  93. static ctl_table powersave_nap_ctl_table[]={
  94. {
  95. .ctl_name = KERN_PPC_POWERSAVE_NAP,
  96. .procname = "powersave-nap",
  97. .data = &powersave_nap,
  98. .maxlen = sizeof(int),
  99. .mode = 0644,
  100. .proc_handler = &proc_dointvec,
  101. },
  102. {}
  103. };
  104. static ctl_table powersave_nap_sysctl_root[] = {
  105. {
  106. .ctl_name = CTL_KERN,
  107. .procname = "kernel",
  108. .mode = 0555,
  109. .child = powersave_nap_ctl_table,
  110. },
  111. {}
  112. };
  113. static int __init
  114. register_powersave_nap_sysctl(void)
  115. {
  116. register_sysctl_table(powersave_nap_sysctl_root);
  117. return 0;
  118. }
  119. __initcall(register_powersave_nap_sysctl);
  120. #endif