123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181 |
- /*
- * arch/arm/mach-ixp23xx/roadrunner.c
- *
- * RoadRunner board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/spinlock.h>
- #include <linux/sched.h>
- #include <linux/interrupt.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/bitops.h>
- #include <linux/ioport.h>
- #include <linux/serial_8250.h>
- #include <linux/serial_core.h>
- #include <linux/device.h>
- #include <linux/mm.h>
- #include <linux/pci.h>
- #include <linux/mtd/physmap.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
- #include <mach/hardware.h>
- #include <asm/mach-types.h>
- #include <asm/irq.h>
- #include <asm/system.h>
- #include <asm/tlbflush.h>
- #include <asm/pgtable.h>
- #include <asm/mach/map.h>
- #include <asm/mach/irq.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/pci.h>
- /*
- * Interrupt mapping
- */
- #define INTA IRQ_ROADRUNNER_PCI_INTA
- #define INTB IRQ_ROADRUNNER_PCI_INTB
- #define INTC IRQ_ROADRUNNER_PCI_INTC
- #define INTD IRQ_ROADRUNNER_PCI_INTD
- #define INTC_PIN IXP23XX_GPIO_PIN_11
- #define INTD_PIN IXP23XX_GPIO_PIN_12
- static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
- {
- static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
- static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
- static int usb_irq[] = {INTB, INTC, INTD, -1};
- static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
- static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
- switch(dev->bus->number) {
- case 0:
- switch(dev->devfn) {
- case 0x0: // PCI-PCI bridge
- break;
- case 0x8: // PCI Card Slot
- return pci_card_slot_irq[pin - 1];
- case 0x10: // PMC Slot
- return pmc_card_slot_irq[pin - 1];
- case 0x18: // PMC Slot Secondary Agent
- break;
- case 0x20: // IXP Processor
- break;
- default:
- return NO_IRQ;
- }
- break;
- case 1:
- switch(dev->devfn) {
- case 0x0: // IDE Controller
- return (pin == 1) ? INTC : -1;
- case 0x8: // USB fun 0
- case 0x9: // USB fun 1
- case 0xa: // USB fun 2
- return usb_irq[pin - 1];
- case 0x10: // Mini PCI 1
- return mini_pci_1_irq[pin-1];
- case 0x18: // Mini PCI 2
- return mini_pci_2_irq[pin-1];
- case 0x20: // MEM slot
- return (pin == 1) ? INTA : -1;
- default:
- return NO_IRQ;
- }
- break;
- default:
- return NO_IRQ;
- }
- return NO_IRQ;
- }
- static void __init roadrunner_pci_preinit(void)
- {
- set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
- set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
- ixp23xx_pci_preinit();
- }
- static struct hw_pci roadrunner_pci __initdata = {
- .nr_controllers = 1,
- .preinit = roadrunner_pci_preinit,
- .setup = ixp23xx_pci_setup,
- .scan = ixp23xx_pci_scan_bus,
- .map_irq = roadrunner_map_irq,
- };
- static int __init roadrunner_pci_init(void)
- {
- if (machine_is_roadrunner())
- pci_common_init(&roadrunner_pci);
- return 0;
- };
- subsys_initcall(roadrunner_pci_init);
- static struct physmap_flash_data roadrunner_flash_data = {
- .width = 2,
- };
- static struct resource roadrunner_flash_resource = {
- .start = 0x90000000,
- .end = 0x93ffffff,
- .flags = IORESOURCE_MEM,
- };
- static struct platform_device roadrunner_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &roadrunner_flash_data,
- },
- .num_resources = 1,
- .resource = &roadrunner_flash_resource,
- };
- static void __init roadrunner_init(void)
- {
- platform_device_register(&roadrunner_flash);
- /*
- * Mark flash as writeable
- */
- IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
- ixp23xx_sys_init();
- }
- MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
- /* Maintainer: Deepak Saxena */
- .phys_io = IXP23XX_PERIPHERAL_PHYS,
- .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
- .map_io = ixp23xx_map_io,
- .init_irq = ixp23xx_init_irq,
- .timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
- .init_machine = roadrunner_init,
- MACHINE_END
|