123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167 |
- /*
- * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
- */
- #ifndef __ASM_ARCH_EP93XX_REGS_H
- #define __ASM_ARCH_EP93XX_REGS_H
- /*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected. When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information. This document can be found at:
- *
- * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
- #define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
- #define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
- #define EP93XX_CS1_PHYS_BASE 0x10000000
- #define EP93XX_CS2_PHYS_BASE 0x20000000
- #define EP93XX_CS3_PHYS_BASE 0x30000000
- #define EP93XX_PCMCIA_PHYS_BASE 0x40000000
- #define EP93XX_CS6_PHYS_BASE 0x60000000
- #define EP93XX_CS7_PHYS_BASE 0x70000000
- #define EP93XX_SDCE0_PHYS_BASE 0xc0000000
- #define EP93XX_SDCE1_PHYS_BASE 0xd0000000
- #define EP93XX_SDCE2_PHYS_BASE 0xe0000000
- #define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
- #define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
- /*
- * EP93xx linux memory map:
- *
- * virt phys size
- * fe800000 5M per-platform mappings
- * fed00000 80800000 2M APB
- * fef00000 80000000 1M AHB
- */
- #define EP93XX_AHB_PHYS_BASE 0x80000000
- #define EP93XX_AHB_VIRT_BASE 0xfef00000
- #define EP93XX_AHB_SIZE 0x00100000
- #define EP93XX_APB_PHYS_BASE 0x80800000
- #define EP93XX_APB_VIRT_BASE 0xfed00000
- #define EP93XX_APB_SIZE 0x00200000
- /* AHB peripherals */
- #define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
- #define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
- #define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
- #define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
- #define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
- #define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
- #define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
- #define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
- #define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
- #define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
- #define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
- #define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
- #define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
- /* APB peripherals */
- #define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
- #define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
- #define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
- #define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
- #define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
- #define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
- #define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
- #define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
- #define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
- #define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
- #define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
- #define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
- #define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
- #define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
- #define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
- #define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
- #define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
- #define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
- #define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
- #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
- #define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
- #define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
- #define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
- #define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
- #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
- #define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
- #define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
- #define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
- #define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
- #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
- #define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
- #define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
- #define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
- #define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
- #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
- #define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
- #define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
- #define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
- #define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
- #define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
- #define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
- #define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
- #define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
- #define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
- #define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
- #define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
- #define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
- #define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
- #define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
- #define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
- #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
- #define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
- #define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
- #define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
- #define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
- #define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
- #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
- #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
- #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
- #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
- #define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
- #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
- #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
- #endif
|