mesh.c 29 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076
  1. /*
  2. * Copyright (c) 2008, 2009 open80211s Ltd.
  3. * Authors: Luis Carlos Cobo <luisca@cozybit.com>
  4. * Javier Cardona <javier@cozybit.com>
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License version 2 as
  8. * published by the Free Software Foundation.
  9. */
  10. #include <linux/slab.h>
  11. #include <asm/unaligned.h>
  12. #include "ieee80211_i.h"
  13. #include "mesh.h"
  14. static int mesh_allocated;
  15. static struct kmem_cache *rm_cache;
  16. bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
  17. {
  18. return (mgmt->u.action.u.mesh_action.action_code ==
  19. WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
  20. }
  21. void ieee80211s_init(void)
  22. {
  23. mesh_pathtbl_init();
  24. mesh_allocated = 1;
  25. rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
  26. 0, 0, NULL);
  27. }
  28. void ieee80211s_stop(void)
  29. {
  30. if (!mesh_allocated)
  31. return;
  32. mesh_pathtbl_unregister();
  33. kmem_cache_destroy(rm_cache);
  34. }
  35. static void ieee80211_mesh_housekeeping_timer(unsigned long data)
  36. {
  37. struct ieee80211_sub_if_data *sdata = (void *) data;
  38. struct ieee80211_local *local = sdata->local;
  39. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  40. set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
  41. ieee80211_queue_work(&local->hw, &sdata->work);
  42. }
  43. /**
  44. * mesh_matches_local - check if the config of a mesh point matches ours
  45. *
  46. * @sdata: local mesh subif
  47. * @ie: information elements of a management frame from the mesh peer
  48. *
  49. * This function checks if the mesh configuration of a mesh point matches the
  50. * local mesh configuration, i.e. if both nodes belong to the same mesh network.
  51. */
  52. bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
  53. struct ieee802_11_elems *ie)
  54. {
  55. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  56. struct ieee80211_local *local = sdata->local;
  57. u32 basic_rates = 0;
  58. struct cfg80211_chan_def sta_chan_def;
  59. /*
  60. * As support for each feature is added, check for matching
  61. * - On mesh config capabilities
  62. * - Power Save Support En
  63. * - Sync support enabled
  64. * - Sync support active
  65. * - Sync support required from peer
  66. * - MDA enabled
  67. * - Power management control on fc
  68. */
  69. if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
  70. memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
  71. (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
  72. (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
  73. (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
  74. (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
  75. (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
  76. return false;
  77. ieee80211_sta_get_rates(local, ie, ieee80211_get_sdata_band(sdata),
  78. &basic_rates);
  79. if (sdata->vif.bss_conf.basic_rates != basic_rates)
  80. return false;
  81. ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan,
  82. ie->ht_operation, &sta_chan_def);
  83. if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef,
  84. &sta_chan_def))
  85. return false;
  86. return true;
  87. }
  88. /**
  89. * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
  90. *
  91. * @ie: information elements of a management frame from the mesh peer
  92. */
  93. bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
  94. {
  95. return (ie->mesh_config->meshconf_cap &
  96. IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
  97. }
  98. /**
  99. * mesh_accept_plinks_update - update accepting_plink in local mesh beacons
  100. *
  101. * @sdata: mesh interface in which mesh beacons are going to be updated
  102. *
  103. * Returns: beacon changed flag if the beacon content changed.
  104. */
  105. u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
  106. {
  107. bool free_plinks;
  108. u32 changed = 0;
  109. /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
  110. * the mesh interface might be able to establish plinks with peers that
  111. * are already on the table but are not on PLINK_ESTAB state. However,
  112. * in general the mesh interface is not accepting peer link requests
  113. * from new peers, and that must be reflected in the beacon
  114. */
  115. free_plinks = mesh_plink_availables(sdata);
  116. if (free_plinks != sdata->u.mesh.accepting_plinks) {
  117. sdata->u.mesh.accepting_plinks = free_plinks;
  118. changed = BSS_CHANGED_BEACON;
  119. }
  120. return changed;
  121. }
  122. /*
  123. * mesh_sta_cleanup - clean up any mesh sta state
  124. *
  125. * @sta: mesh sta to clean up.
  126. */
  127. void mesh_sta_cleanup(struct sta_info *sta)
  128. {
  129. struct ieee80211_sub_if_data *sdata = sta->sdata;
  130. u32 changed;
  131. /*
  132. * maybe userspace handles peer allocation and peering, but in either
  133. * case the beacon is still generated by the kernel and we might need
  134. * an update.
  135. */
  136. changed = mesh_accept_plinks_update(sdata);
  137. if (!sdata->u.mesh.user_mpm) {
  138. changed |= mesh_plink_deactivate(sta);
  139. del_timer_sync(&sta->plink_timer);
  140. }
  141. if (changed)
  142. ieee80211_mbss_info_change_notify(sdata, changed);
  143. }
  144. int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
  145. {
  146. int i;
  147. sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
  148. if (!sdata->u.mesh.rmc)
  149. return -ENOMEM;
  150. sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
  151. for (i = 0; i < RMC_BUCKETS; i++)
  152. INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i]);
  153. return 0;
  154. }
  155. void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
  156. {
  157. struct mesh_rmc *rmc = sdata->u.mesh.rmc;
  158. struct rmc_entry *p, *n;
  159. int i;
  160. if (!sdata->u.mesh.rmc)
  161. return;
  162. for (i = 0; i < RMC_BUCKETS; i++) {
  163. list_for_each_entry_safe(p, n, &rmc->bucket[i], list) {
  164. list_del(&p->list);
  165. kmem_cache_free(rm_cache, p);
  166. }
  167. }
  168. kfree(rmc);
  169. sdata->u.mesh.rmc = NULL;
  170. }
  171. /**
  172. * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
  173. *
  174. * @sdata: interface
  175. * @sa: source address
  176. * @mesh_hdr: mesh_header
  177. *
  178. * Returns: 0 if the frame is not in the cache, nonzero otherwise.
  179. *
  180. * Checks using the source address and the mesh sequence number if we have
  181. * received this frame lately. If the frame is not in the cache, it is added to
  182. * it.
  183. */
  184. int mesh_rmc_check(struct ieee80211_sub_if_data *sdata,
  185. const u8 *sa, struct ieee80211s_hdr *mesh_hdr)
  186. {
  187. struct mesh_rmc *rmc = sdata->u.mesh.rmc;
  188. u32 seqnum = 0;
  189. int entries = 0;
  190. u8 idx;
  191. struct rmc_entry *p, *n;
  192. /* Don't care about endianness since only match matters */
  193. memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
  194. idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
  195. list_for_each_entry_safe(p, n, &rmc->bucket[idx], list) {
  196. ++entries;
  197. if (time_after(jiffies, p->exp_time) ||
  198. entries == RMC_QUEUE_MAX_LEN) {
  199. list_del(&p->list);
  200. kmem_cache_free(rm_cache, p);
  201. --entries;
  202. } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa))
  203. return -1;
  204. }
  205. p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
  206. if (!p)
  207. return 0;
  208. p->seqnum = seqnum;
  209. p->exp_time = jiffies + RMC_TIMEOUT;
  210. memcpy(p->sa, sa, ETH_ALEN);
  211. list_add(&p->list, &rmc->bucket[idx]);
  212. return 0;
  213. }
  214. int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
  215. struct sk_buff *skb)
  216. {
  217. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  218. u8 *pos, neighbors;
  219. u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
  220. if (skb_tailroom(skb) < 2 + meshconf_len)
  221. return -ENOMEM;
  222. pos = skb_put(skb, 2 + meshconf_len);
  223. *pos++ = WLAN_EID_MESH_CONFIG;
  224. *pos++ = meshconf_len;
  225. /* Active path selection protocol ID */
  226. *pos++ = ifmsh->mesh_pp_id;
  227. /* Active path selection metric ID */
  228. *pos++ = ifmsh->mesh_pm_id;
  229. /* Congestion control mode identifier */
  230. *pos++ = ifmsh->mesh_cc_id;
  231. /* Synchronization protocol identifier */
  232. *pos++ = ifmsh->mesh_sp_id;
  233. /* Authentication Protocol identifier */
  234. *pos++ = ifmsh->mesh_auth_id;
  235. /* Mesh Formation Info - number of neighbors */
  236. neighbors = atomic_read(&ifmsh->estab_plinks);
  237. neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS);
  238. *pos++ = neighbors << 1;
  239. /* Mesh capability */
  240. *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING;
  241. *pos |= ifmsh->accepting_plinks ?
  242. IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
  243. /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
  244. *pos |= ifmsh->ps_peers_deep_sleep ?
  245. IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
  246. *pos++ |= ifmsh->adjusting_tbtt ?
  247. IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
  248. *pos++ = 0x00;
  249. return 0;
  250. }
  251. int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
  252. {
  253. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  254. u8 *pos;
  255. if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
  256. return -ENOMEM;
  257. pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
  258. *pos++ = WLAN_EID_MESH_ID;
  259. *pos++ = ifmsh->mesh_id_len;
  260. if (ifmsh->mesh_id_len)
  261. memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
  262. return 0;
  263. }
  264. static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata,
  265. struct sk_buff *skb)
  266. {
  267. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  268. u8 *pos;
  269. /* see IEEE802.11-2012 13.14.6 */
  270. if (ifmsh->ps_peers_light_sleep == 0 &&
  271. ifmsh->ps_peers_deep_sleep == 0 &&
  272. ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
  273. return 0;
  274. if (skb_tailroom(skb) < 4)
  275. return -ENOMEM;
  276. pos = skb_put(skb, 2 + 2);
  277. *pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
  278. *pos++ = 2;
  279. put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
  280. return 0;
  281. }
  282. int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata,
  283. struct sk_buff *skb)
  284. {
  285. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  286. u8 offset, len;
  287. const u8 *data;
  288. if (!ifmsh->ie || !ifmsh->ie_len)
  289. return 0;
  290. /* fast-forward to vendor IEs */
  291. offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
  292. if (offset) {
  293. len = ifmsh->ie_len - offset;
  294. data = ifmsh->ie + offset;
  295. if (skb_tailroom(skb) < len)
  296. return -ENOMEM;
  297. memcpy(skb_put(skb, len), data, len);
  298. }
  299. return 0;
  300. }
  301. int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
  302. {
  303. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  304. u8 len = 0;
  305. const u8 *data;
  306. if (!ifmsh->ie || !ifmsh->ie_len)
  307. return 0;
  308. /* find RSN IE */
  309. data = ifmsh->ie;
  310. while (data < ifmsh->ie + ifmsh->ie_len) {
  311. if (*data == WLAN_EID_RSN) {
  312. len = data[1] + 2;
  313. break;
  314. }
  315. data++;
  316. }
  317. if (len) {
  318. if (skb_tailroom(skb) < len)
  319. return -ENOMEM;
  320. memcpy(skb_put(skb, len), data, len);
  321. }
  322. return 0;
  323. }
  324. static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata,
  325. struct sk_buff *skb)
  326. {
  327. struct ieee80211_chanctx_conf *chanctx_conf;
  328. struct ieee80211_channel *chan;
  329. u8 *pos;
  330. if (skb_tailroom(skb) < 3)
  331. return -ENOMEM;
  332. rcu_read_lock();
  333. chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
  334. if (WARN_ON(!chanctx_conf)) {
  335. rcu_read_unlock();
  336. return -EINVAL;
  337. }
  338. chan = chanctx_conf->def.chan;
  339. rcu_read_unlock();
  340. pos = skb_put(skb, 2 + 1);
  341. *pos++ = WLAN_EID_DS_PARAMS;
  342. *pos++ = 1;
  343. *pos++ = ieee80211_frequency_to_channel(chan->center_freq);
  344. return 0;
  345. }
  346. int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
  347. struct sk_buff *skb)
  348. {
  349. struct ieee80211_local *local = sdata->local;
  350. enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
  351. struct ieee80211_supported_band *sband;
  352. u8 *pos;
  353. sband = local->hw.wiphy->bands[band];
  354. if (!sband->ht_cap.ht_supported ||
  355. sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
  356. return 0;
  357. if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
  358. return -ENOMEM;
  359. pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
  360. ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
  361. return 0;
  362. }
  363. int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
  364. struct sk_buff *skb)
  365. {
  366. struct ieee80211_local *local = sdata->local;
  367. struct ieee80211_chanctx_conf *chanctx_conf;
  368. struct ieee80211_channel *channel;
  369. enum nl80211_channel_type channel_type =
  370. cfg80211_get_chandef_type(&sdata->vif.bss_conf.chandef);
  371. struct ieee80211_supported_band *sband;
  372. struct ieee80211_sta_ht_cap *ht_cap;
  373. u8 *pos;
  374. rcu_read_lock();
  375. chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
  376. if (WARN_ON(!chanctx_conf)) {
  377. rcu_read_unlock();
  378. return -EINVAL;
  379. }
  380. channel = chanctx_conf->def.chan;
  381. rcu_read_unlock();
  382. sband = local->hw.wiphy->bands[channel->band];
  383. ht_cap = &sband->ht_cap;
  384. if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT)
  385. return 0;
  386. if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation))
  387. return -ENOMEM;
  388. pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
  389. ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef,
  390. sdata->vif.bss_conf.ht_operation_mode);
  391. return 0;
  392. }
  393. static void ieee80211_mesh_path_timer(unsigned long data)
  394. {
  395. struct ieee80211_sub_if_data *sdata =
  396. (struct ieee80211_sub_if_data *) data;
  397. ieee80211_queue_work(&sdata->local->hw, &sdata->work);
  398. }
  399. static void ieee80211_mesh_path_root_timer(unsigned long data)
  400. {
  401. struct ieee80211_sub_if_data *sdata =
  402. (struct ieee80211_sub_if_data *) data;
  403. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  404. set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
  405. ieee80211_queue_work(&sdata->local->hw, &sdata->work);
  406. }
  407. void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
  408. {
  409. if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
  410. set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
  411. else {
  412. clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
  413. /* stop running timer */
  414. del_timer_sync(&ifmsh->mesh_path_root_timer);
  415. }
  416. }
  417. /**
  418. * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
  419. * @hdr: 802.11 frame header
  420. * @fc: frame control field
  421. * @meshda: destination address in the mesh
  422. * @meshsa: source address address in the mesh. Same as TA, as frame is
  423. * locally originated.
  424. *
  425. * Return the length of the 802.11 (does not include a mesh control header)
  426. */
  427. int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
  428. const u8 *meshda, const u8 *meshsa)
  429. {
  430. if (is_multicast_ether_addr(meshda)) {
  431. *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
  432. /* DA TA SA */
  433. memcpy(hdr->addr1, meshda, ETH_ALEN);
  434. memcpy(hdr->addr2, meshsa, ETH_ALEN);
  435. memcpy(hdr->addr3, meshsa, ETH_ALEN);
  436. return 24;
  437. } else {
  438. *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
  439. /* RA TA DA SA */
  440. memset(hdr->addr1, 0, ETH_ALEN); /* RA is resolved later */
  441. memcpy(hdr->addr2, meshsa, ETH_ALEN);
  442. memcpy(hdr->addr3, meshda, ETH_ALEN);
  443. memcpy(hdr->addr4, meshsa, ETH_ALEN);
  444. return 30;
  445. }
  446. }
  447. /**
  448. * ieee80211_new_mesh_header - create a new mesh header
  449. * @sdata: mesh interface to be used
  450. * @meshhdr: uninitialized mesh header
  451. * @addr4or5: 1st address in the ae header, which may correspond to address 4
  452. * (if addr6 is NULL) or address 5 (if addr6 is present). It may
  453. * be NULL.
  454. * @addr6: 2nd address in the ae header, which corresponds to addr6 of the
  455. * mesh frame
  456. *
  457. * Return the header length.
  458. */
  459. int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata,
  460. struct ieee80211s_hdr *meshhdr,
  461. const char *addr4or5, const char *addr6)
  462. {
  463. if (WARN_ON(!addr4or5 && addr6))
  464. return 0;
  465. memset(meshhdr, 0, sizeof(*meshhdr));
  466. meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
  467. /* FIXME: racy -- TX on multiple queues can be concurrent */
  468. put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
  469. sdata->u.mesh.mesh_seqnum++;
  470. if (addr4or5 && !addr6) {
  471. meshhdr->flags |= MESH_FLAGS_AE_A4;
  472. memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
  473. return 2 * ETH_ALEN;
  474. } else if (addr4or5 && addr6) {
  475. meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
  476. memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
  477. memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
  478. return 3 * ETH_ALEN;
  479. }
  480. return ETH_ALEN;
  481. }
  482. static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata)
  483. {
  484. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  485. u32 changed;
  486. ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ);
  487. mesh_path_expire(sdata);
  488. changed = mesh_accept_plinks_update(sdata);
  489. ieee80211_mbss_info_change_notify(sdata, changed);
  490. mod_timer(&ifmsh->housekeeping_timer,
  491. round_jiffies(jiffies +
  492. IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
  493. }
  494. static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
  495. {
  496. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  497. u32 interval;
  498. mesh_path_tx_root_frame(sdata);
  499. if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
  500. interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
  501. else
  502. interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
  503. mod_timer(&ifmsh->mesh_path_root_timer,
  504. round_jiffies(TU_TO_EXP_TIME(interval)));
  505. }
  506. static int
  507. ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
  508. {
  509. struct beacon_data *bcn;
  510. int head_len, tail_len;
  511. struct sk_buff *skb;
  512. struct ieee80211_mgmt *mgmt;
  513. struct ieee80211_chanctx_conf *chanctx_conf;
  514. enum ieee80211_band band;
  515. u8 *pos;
  516. struct ieee80211_sub_if_data *sdata;
  517. int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) +
  518. sizeof(mgmt->u.beacon);
  519. sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh);
  520. rcu_read_lock();
  521. chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
  522. band = chanctx_conf->def.chan->band;
  523. rcu_read_unlock();
  524. head_len = hdr_len +
  525. 2 + /* NULL SSID */
  526. 2 + 8 + /* supported rates */
  527. 2 + 3; /* DS params */
  528. tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
  529. 2 + sizeof(struct ieee80211_ht_cap) +
  530. 2 + sizeof(struct ieee80211_ht_operation) +
  531. 2 + ifmsh->mesh_id_len +
  532. 2 + sizeof(struct ieee80211_meshconf_ie) +
  533. 2 + sizeof(__le16) + /* awake window */
  534. ifmsh->ie_len;
  535. bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL);
  536. /* need an skb for IE builders to operate on */
  537. skb = dev_alloc_skb(max(head_len, tail_len));
  538. if (!bcn || !skb)
  539. goto out_free;
  540. /*
  541. * pointers go into the block we allocated,
  542. * memory is | beacon_data | head | tail |
  543. */
  544. bcn->head = ((u8 *) bcn) + sizeof(*bcn);
  545. /* fill in the head */
  546. mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len);
  547. memset(mgmt, 0, hdr_len);
  548. mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
  549. IEEE80211_STYPE_BEACON);
  550. eth_broadcast_addr(mgmt->da);
  551. memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
  552. memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
  553. ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
  554. mgmt->u.beacon.beacon_int =
  555. cpu_to_le16(sdata->vif.bss_conf.beacon_int);
  556. mgmt->u.beacon.capab_info |= cpu_to_le16(
  557. sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0);
  558. pos = skb_put(skb, 2);
  559. *pos++ = WLAN_EID_SSID;
  560. *pos++ = 0x0;
  561. if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
  562. mesh_add_ds_params_ie(sdata, skb))
  563. goto out_free;
  564. bcn->head_len = skb->len;
  565. memcpy(bcn->head, skb->data, bcn->head_len);
  566. /* now the tail */
  567. skb_trim(skb, 0);
  568. bcn->tail = bcn->head + bcn->head_len;
  569. if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
  570. mesh_add_rsn_ie(sdata, skb) ||
  571. mesh_add_ht_cap_ie(sdata, skb) ||
  572. mesh_add_ht_oper_ie(sdata, skb) ||
  573. mesh_add_meshid_ie(sdata, skb) ||
  574. mesh_add_meshconf_ie(sdata, skb) ||
  575. mesh_add_awake_window_ie(sdata, skb) ||
  576. mesh_add_vendor_ies(sdata, skb))
  577. goto out_free;
  578. bcn->tail_len = skb->len;
  579. memcpy(bcn->tail, skb->data, bcn->tail_len);
  580. dev_kfree_skb(skb);
  581. rcu_assign_pointer(ifmsh->beacon, bcn);
  582. return 0;
  583. out_free:
  584. kfree(bcn);
  585. dev_kfree_skb(skb);
  586. return -ENOMEM;
  587. }
  588. static int
  589. ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata)
  590. {
  591. struct beacon_data *old_bcn;
  592. int ret;
  593. old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon,
  594. lockdep_is_held(&sdata->wdev.mtx));
  595. ret = ieee80211_mesh_build_beacon(&sdata->u.mesh);
  596. if (ret)
  597. /* just reuse old beacon */
  598. return ret;
  599. if (old_bcn)
  600. kfree_rcu(old_bcn, rcu_head);
  601. return 0;
  602. }
  603. void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata,
  604. u32 changed)
  605. {
  606. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  607. unsigned long bits = changed;
  608. u32 bit;
  609. if (!bits)
  610. return;
  611. /* if we race with running work, worst case this work becomes a noop */
  612. for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE)
  613. set_bit(bit, &ifmsh->mbss_changed);
  614. set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags);
  615. ieee80211_queue_work(&sdata->local->hw, &sdata->work);
  616. }
  617. int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
  618. {
  619. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  620. struct ieee80211_local *local = sdata->local;
  621. u32 changed = BSS_CHANGED_BEACON |
  622. BSS_CHANGED_BEACON_ENABLED |
  623. BSS_CHANGED_HT |
  624. BSS_CHANGED_BASIC_RATES |
  625. BSS_CHANGED_BEACON_INT;
  626. local->fif_other_bss++;
  627. /* mesh ifaces must set allmulti to forward mcast traffic */
  628. atomic_inc(&local->iff_allmultis);
  629. ieee80211_configure_filter(local);
  630. ifmsh->mesh_cc_id = 0; /* Disabled */
  631. /* register sync ops from extensible synchronization framework */
  632. ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
  633. ifmsh->adjusting_tbtt = false;
  634. ifmsh->sync_offset_clockdrift_max = 0;
  635. set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
  636. ieee80211_mesh_root_setup(ifmsh);
  637. ieee80211_queue_work(&local->hw, &sdata->work);
  638. sdata->vif.bss_conf.ht_operation_mode =
  639. ifmsh->mshcfg.ht_opmode;
  640. sdata->vif.bss_conf.enable_beacon = true;
  641. changed |= ieee80211_mps_local_status_update(sdata);
  642. if (ieee80211_mesh_build_beacon(ifmsh)) {
  643. ieee80211_stop_mesh(sdata);
  644. return -ENOMEM;
  645. }
  646. ieee80211_bss_info_change_notify(sdata, changed);
  647. netif_carrier_on(sdata->dev);
  648. return 0;
  649. }
  650. void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
  651. {
  652. struct ieee80211_local *local = sdata->local;
  653. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  654. struct beacon_data *bcn;
  655. netif_carrier_off(sdata->dev);
  656. /* stop the beacon */
  657. ifmsh->mesh_id_len = 0;
  658. sdata->vif.bss_conf.enable_beacon = false;
  659. clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
  660. ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
  661. bcn = rcu_dereference_protected(ifmsh->beacon,
  662. lockdep_is_held(&sdata->wdev.mtx));
  663. rcu_assign_pointer(ifmsh->beacon, NULL);
  664. kfree_rcu(bcn, rcu_head);
  665. /* flush STAs and mpaths on this iface */
  666. sta_info_flush(sdata);
  667. mesh_path_flush_by_iface(sdata);
  668. /* free all potentially still buffered group-addressed frames */
  669. local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
  670. skb_queue_purge(&ifmsh->ps.bc_buf);
  671. del_timer_sync(&sdata->u.mesh.housekeeping_timer);
  672. del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
  673. del_timer_sync(&sdata->u.mesh.mesh_path_timer);
  674. /* clear any mesh work (for next join) we may have accrued */
  675. ifmsh->wrkq_flags = 0;
  676. ifmsh->mbss_changed = 0;
  677. local->fif_other_bss--;
  678. atomic_dec(&local->iff_allmultis);
  679. ieee80211_configure_filter(local);
  680. }
  681. static void
  682. ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata,
  683. struct ieee80211_mgmt *mgmt, size_t len)
  684. {
  685. struct ieee80211_local *local = sdata->local;
  686. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  687. struct sk_buff *presp;
  688. struct beacon_data *bcn;
  689. struct ieee80211_mgmt *hdr;
  690. struct ieee802_11_elems elems;
  691. size_t baselen;
  692. u8 *pos;
  693. pos = mgmt->u.probe_req.variable;
  694. baselen = (u8 *) pos - (u8 *) mgmt;
  695. if (baselen > len)
  696. return;
  697. ieee802_11_parse_elems(pos, len - baselen, false, &elems);
  698. /* 802.11-2012 10.1.4.3.2 */
  699. if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
  700. !is_broadcast_ether_addr(mgmt->da)) ||
  701. elems.ssid_len != 0)
  702. return;
  703. if (elems.mesh_id_len != 0 &&
  704. (elems.mesh_id_len != ifmsh->mesh_id_len ||
  705. memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len)))
  706. return;
  707. rcu_read_lock();
  708. bcn = rcu_dereference(ifmsh->beacon);
  709. if (!bcn)
  710. goto out;
  711. presp = dev_alloc_skb(local->tx_headroom +
  712. bcn->head_len + bcn->tail_len);
  713. if (!presp)
  714. goto out;
  715. skb_reserve(presp, local->tx_headroom);
  716. memcpy(skb_put(presp, bcn->head_len), bcn->head, bcn->head_len);
  717. memcpy(skb_put(presp, bcn->tail_len), bcn->tail, bcn->tail_len);
  718. hdr = (struct ieee80211_mgmt *) presp->data;
  719. hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
  720. IEEE80211_STYPE_PROBE_RESP);
  721. memcpy(hdr->da, mgmt->sa, ETH_ALEN);
  722. IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
  723. ieee80211_tx_skb(sdata, presp);
  724. out:
  725. rcu_read_unlock();
  726. }
  727. static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
  728. u16 stype,
  729. struct ieee80211_mgmt *mgmt,
  730. size_t len,
  731. struct ieee80211_rx_status *rx_status)
  732. {
  733. struct ieee80211_local *local = sdata->local;
  734. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  735. struct ieee802_11_elems elems;
  736. struct ieee80211_channel *channel;
  737. size_t baselen;
  738. int freq;
  739. enum ieee80211_band band = rx_status->band;
  740. /* ignore ProbeResp to foreign address */
  741. if (stype == IEEE80211_STYPE_PROBE_RESP &&
  742. !ether_addr_equal(mgmt->da, sdata->vif.addr))
  743. return;
  744. baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
  745. if (baselen > len)
  746. return;
  747. ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
  748. false, &elems);
  749. /* ignore non-mesh or secure / unsecure mismatch */
  750. if ((!elems.mesh_id || !elems.mesh_config) ||
  751. (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) ||
  752. (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE))
  753. return;
  754. if (elems.ds_params)
  755. freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
  756. else
  757. freq = rx_status->freq;
  758. channel = ieee80211_get_channel(local->hw.wiphy, freq);
  759. if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
  760. return;
  761. if (mesh_matches_local(sdata, &elems))
  762. mesh_neighbour_update(sdata, mgmt->sa, &elems);
  763. if (ifmsh->sync_ops)
  764. ifmsh->sync_ops->rx_bcn_presp(sdata,
  765. stype, mgmt, &elems, rx_status);
  766. }
  767. static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
  768. struct ieee80211_mgmt *mgmt,
  769. size_t len,
  770. struct ieee80211_rx_status *rx_status)
  771. {
  772. switch (mgmt->u.action.category) {
  773. case WLAN_CATEGORY_SELF_PROTECTED:
  774. switch (mgmt->u.action.u.self_prot.action_code) {
  775. case WLAN_SP_MESH_PEERING_OPEN:
  776. case WLAN_SP_MESH_PEERING_CLOSE:
  777. case WLAN_SP_MESH_PEERING_CONFIRM:
  778. mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
  779. break;
  780. }
  781. break;
  782. case WLAN_CATEGORY_MESH_ACTION:
  783. if (mesh_action_is_path_sel(mgmt))
  784. mesh_rx_path_sel_frame(sdata, mgmt, len);
  785. break;
  786. }
  787. }
  788. void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
  789. struct sk_buff *skb)
  790. {
  791. struct ieee80211_rx_status *rx_status;
  792. struct ieee80211_mgmt *mgmt;
  793. u16 stype;
  794. sdata_lock(sdata);
  795. /* mesh already went down */
  796. if (!sdata->wdev.mesh_id_len)
  797. goto out;
  798. rx_status = IEEE80211_SKB_RXCB(skb);
  799. mgmt = (struct ieee80211_mgmt *) skb->data;
  800. stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
  801. switch (stype) {
  802. case IEEE80211_STYPE_PROBE_RESP:
  803. case IEEE80211_STYPE_BEACON:
  804. ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
  805. rx_status);
  806. break;
  807. case IEEE80211_STYPE_PROBE_REQ:
  808. ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len);
  809. break;
  810. case IEEE80211_STYPE_ACTION:
  811. ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
  812. break;
  813. }
  814. out:
  815. sdata_unlock(sdata);
  816. }
  817. static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata)
  818. {
  819. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  820. u32 bit, changed = 0;
  821. for_each_set_bit(bit, &ifmsh->mbss_changed,
  822. sizeof(changed) * BITS_PER_BYTE) {
  823. clear_bit(bit, &ifmsh->mbss_changed);
  824. changed |= BIT(bit);
  825. }
  826. if (sdata->vif.bss_conf.enable_beacon &&
  827. (changed & (BSS_CHANGED_BEACON |
  828. BSS_CHANGED_HT |
  829. BSS_CHANGED_BASIC_RATES |
  830. BSS_CHANGED_BEACON_INT)))
  831. if (ieee80211_mesh_rebuild_beacon(sdata))
  832. return;
  833. ieee80211_bss_info_change_notify(sdata, changed);
  834. }
  835. void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
  836. {
  837. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  838. sdata_lock(sdata);
  839. /* mesh already went down */
  840. if (!sdata->wdev.mesh_id_len)
  841. goto out;
  842. if (ifmsh->preq_queue_len &&
  843. time_after(jiffies,
  844. ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
  845. mesh_path_start_discovery(sdata);
  846. if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
  847. mesh_mpath_table_grow();
  848. if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags))
  849. mesh_mpp_table_grow();
  850. if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
  851. ieee80211_mesh_housekeeping(sdata);
  852. if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
  853. ieee80211_mesh_rootpath(sdata);
  854. if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags))
  855. mesh_sync_adjust_tbtt(sdata);
  856. if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags))
  857. mesh_bss_info_changed(sdata);
  858. out:
  859. sdata_unlock(sdata);
  860. }
  861. void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
  862. {
  863. struct ieee80211_sub_if_data *sdata;
  864. rcu_read_lock();
  865. list_for_each_entry_rcu(sdata, &local->interfaces, list)
  866. if (ieee80211_vif_is_mesh(&sdata->vif) &&
  867. ieee80211_sdata_running(sdata))
  868. ieee80211_queue_work(&local->hw, &sdata->work);
  869. rcu_read_unlock();
  870. }
  871. void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
  872. {
  873. struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  874. static u8 zero_addr[ETH_ALEN] = {};
  875. setup_timer(&ifmsh->housekeeping_timer,
  876. ieee80211_mesh_housekeeping_timer,
  877. (unsigned long) sdata);
  878. ifmsh->accepting_plinks = true;
  879. ifmsh->preq_id = 0;
  880. ifmsh->sn = 0;
  881. ifmsh->num_gates = 0;
  882. atomic_set(&ifmsh->mpaths, 0);
  883. mesh_rmc_init(sdata);
  884. ifmsh->last_preq = jiffies;
  885. ifmsh->next_perr = jiffies;
  886. /* Allocate all mesh structures when creating the first mesh interface. */
  887. if (!mesh_allocated)
  888. ieee80211s_init();
  889. setup_timer(&ifmsh->mesh_path_timer,
  890. ieee80211_mesh_path_timer,
  891. (unsigned long) sdata);
  892. setup_timer(&ifmsh->mesh_path_root_timer,
  893. ieee80211_mesh_path_root_timer,
  894. (unsigned long) sdata);
  895. INIT_LIST_HEAD(&ifmsh->preq_queue.list);
  896. skb_queue_head_init(&ifmsh->ps.bc_buf);
  897. spin_lock_init(&ifmsh->mesh_preq_queue_lock);
  898. spin_lock_init(&ifmsh->sync_offset_lock);
  899. RCU_INIT_POINTER(ifmsh->beacon, NULL);
  900. sdata->vif.bss_conf.bssid = zero_addr;
  901. }