| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105 |
- config B43LEGACY
- tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
- select SSB
- select FW_LOADER
- select HW_RANDOM
- ---help---
- b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
- BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
- Linksys WPC54G V1 PCMCIA devices.
- Newer 802.11g and 802.11a devices need b43.
- It is safe to include both b43 and b43legacy as the underlying glue
- layer will automatically load the correct version for your device.
- This driver uses V3 firmware, which must be installed separately using
- b43-fwcutter.
- This driver can be built as a module (recommended) that will be
- called "b43legacy". If unsure, say M.
- # Auto-select SSB PCI-HOST support, if possible
- config B43LEGACY_PCI_AUTOSELECT
- bool
- depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
- select SSB_PCIHOST
- default y
- # Auto-select SSB PCICORE driver, if possible
- config B43LEGACY_PCICORE_AUTOSELECT
- bool
- depends on B43LEGACY && SSB_DRIVER_PCICORE_POSSIBLE
- select SSB_DRIVER_PCICORE
- default y
- # LED support
- # This config option automatically enables b43legacy LEDS support,
- # if it's possible.
- config B43LEGACY_LEDS
- bool
- depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY)
- default y
- # RFKILL support
- # This config option automatically enables b43legacy RFKILL support,
- # if it's possible.
- config B43LEGACY_RFKILL
- bool
- depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43LEGACY)
- default y
- config B43LEGACY_DEBUG
- bool "Broadcom 43xx-legacy debugging"
- depends on B43LEGACY
- default y
- ---help---
- Say Y, because this information will help you get the driver running.
- This option generates a minimum of log output.
- config B43LEGACY_DMA
- bool
- depends on B43LEGACY
- config B43LEGACY_PIO
- bool
- depends on B43LEGACY
- choice
- prompt "Broadcom 43xx-legacy data transfer mode"
- depends on B43LEGACY
- default B43LEGACY_DMA_AND_PIO_MODE
- config B43LEGACY_DMA_AND_PIO_MODE
- bool "DMA + PIO"
- select B43LEGACY_DMA
- select B43LEGACY_PIO
- ---help---
- Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
- data transfer modes. The mode actually used is selectable through
- the module parameter "pio". With pio=0 as a module parameter, the
- default DMA is used, otherwise PIO is used.
- If unsure, choose this option.
- config B43LEGACY_DMA_MODE
- bool "DMA (Direct Memory Access) only"
- select B43LEGACY_DMA
- ---help---
- Only include Direct Memory Access (DMA).
- This reduces the size of the driver module, by omitting the PIO code.
- config B43LEGACY_PIO_MODE
- bool "PIO (Programmed I/O) only"
- select B43LEGACY_PIO
- ---help---
- Only include Programmed I/O (PIO).
- This reduces the size of the driver module, by omitting the DMA code.
- Please note that PIO transfers are slow (compared to DMA).
- Also note that not all devices of the b43legacy series support PIO.
- You should use PIO only if DMA does not work for you.
- endchoice
|
