bnx2x_cmn.h 36 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480
  1. /* bnx2x_cmn.h: Broadcom Everest network driver.
  2. *
  3. * Copyright (c) 2007-2011 Broadcom Corporation
  4. *
  5. * This program is free software; you can redistribute it and/or modify
  6. * it under the terms of the GNU General Public License as published by
  7. * the Free Software Foundation.
  8. *
  9. * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  10. * Written by: Eliezer Tamir
  11. * Based on code from Michael Chan's bnx2 driver
  12. * UDP CSUM errata workaround by Arik Gendelman
  13. * Slowpath and fastpath rework by Vladislav Zolotarov
  14. * Statistics and Link management by Yitchak Gertner
  15. *
  16. */
  17. #ifndef BNX2X_CMN_H
  18. #define BNX2X_CMN_H
  19. #include <linux/types.h>
  20. #include <linux/pci.h>
  21. #include <linux/netdevice.h>
  22. #include "bnx2x.h"
  23. /* This is used as a replacement for an MCP if it's not present */
  24. extern int load_count[2][3]; /* per-path: 0-common, 1-port0, 2-port1 */
  25. extern int num_queues;
  26. /************************ Macros ********************************/
  27. #define BNX2X_PCI_FREE(x, y, size) \
  28. do { \
  29. if (x) { \
  30. dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \
  31. x = NULL; \
  32. y = 0; \
  33. } \
  34. } while (0)
  35. #define BNX2X_FREE(x) \
  36. do { \
  37. if (x) { \
  38. kfree((void *)x); \
  39. x = NULL; \
  40. } \
  41. } while (0)
  42. #define BNX2X_PCI_ALLOC(x, y, size) \
  43. do { \
  44. x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
  45. if (x == NULL) \
  46. goto alloc_mem_err; \
  47. memset((void *)x, 0, size); \
  48. } while (0)
  49. #define BNX2X_ALLOC(x, size) \
  50. do { \
  51. x = kzalloc(size, GFP_KERNEL); \
  52. if (x == NULL) \
  53. goto alloc_mem_err; \
  54. } while (0)
  55. /*********************** Interfaces ****************************
  56. * Functions that need to be implemented by each driver version
  57. */
  58. /* Init */
  59. /**
  60. * bnx2x_send_unload_req - request unload mode from the MCP.
  61. *
  62. * @bp: driver handle
  63. * @unload_mode: requested function's unload mode
  64. *
  65. * Return unload mode returned by the MCP: COMMON, PORT or FUNC.
  66. */
  67. u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode);
  68. /**
  69. * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
  70. *
  71. * @bp: driver handle
  72. */
  73. void bnx2x_send_unload_done(struct bnx2x *bp);
  74. /**
  75. * bnx2x_config_rss_pf - configure RSS parameters.
  76. *
  77. * @bp: driver handle
  78. * @ind_table: indirection table to configure
  79. * @config_hash: re-configure RSS hash keys configuration
  80. */
  81. int bnx2x_config_rss_pf(struct bnx2x *bp, u8 *ind_table, bool config_hash);
  82. /**
  83. * bnx2x__init_func_obj - init function object
  84. *
  85. * @bp: driver handle
  86. *
  87. * Initializes the Function Object with the appropriate
  88. * parameters which include a function slow path driver
  89. * interface.
  90. */
  91. void bnx2x__init_func_obj(struct bnx2x *bp);
  92. /**
  93. * bnx2x_setup_queue - setup eth queue.
  94. *
  95. * @bp: driver handle
  96. * @fp: pointer to the fastpath structure
  97. * @leading: boolean
  98. *
  99. */
  100. int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
  101. bool leading);
  102. /**
  103. * bnx2x_setup_leading - bring up a leading eth queue.
  104. *
  105. * @bp: driver handle
  106. */
  107. int bnx2x_setup_leading(struct bnx2x *bp);
  108. /**
  109. * bnx2x_fw_command - send the MCP a request
  110. *
  111. * @bp: driver handle
  112. * @command: request
  113. * @param: request's parameter
  114. *
  115. * block until there is a reply
  116. */
  117. u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param);
  118. /**
  119. * bnx2x_initial_phy_init - initialize link parameters structure variables.
  120. *
  121. * @bp: driver handle
  122. * @load_mode: current mode
  123. */
  124. u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode);
  125. /**
  126. * bnx2x_link_set - configure hw according to link parameters structure.
  127. *
  128. * @bp: driver handle
  129. */
  130. void bnx2x_link_set(struct bnx2x *bp);
  131. /**
  132. * bnx2x_link_test - query link status.
  133. *
  134. * @bp: driver handle
  135. * @is_serdes: bool
  136. *
  137. * Returns 0 if link is UP.
  138. */
  139. u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes);
  140. /**
  141. * bnx2x_drv_pulse - write driver pulse to shmem
  142. *
  143. * @bp: driver handle
  144. *
  145. * writes the value in bp->fw_drv_pulse_wr_seq to drv_pulse mbox
  146. * in the shmem.
  147. */
  148. void bnx2x_drv_pulse(struct bnx2x *bp);
  149. /**
  150. * bnx2x_igu_ack_sb - update IGU with current SB value
  151. *
  152. * @bp: driver handle
  153. * @igu_sb_id: SB id
  154. * @segment: SB segment
  155. * @index: SB index
  156. * @op: SB operation
  157. * @update: is HW update required
  158. */
  159. void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
  160. u16 index, u8 op, u8 update);
  161. /* Disable transactions from chip to host */
  162. void bnx2x_pf_disable(struct bnx2x *bp);
  163. /**
  164. * bnx2x__link_status_update - handles link status change.
  165. *
  166. * @bp: driver handle
  167. */
  168. void bnx2x__link_status_update(struct bnx2x *bp);
  169. /**
  170. * bnx2x_link_report - report link status to upper layer.
  171. *
  172. * @bp: driver handle
  173. */
  174. void bnx2x_link_report(struct bnx2x *bp);
  175. /* None-atomic version of bnx2x_link_report() */
  176. void __bnx2x_link_report(struct bnx2x *bp);
  177. /**
  178. * bnx2x_get_mf_speed - calculate MF speed.
  179. *
  180. * @bp: driver handle
  181. *
  182. * Takes into account current linespeed and MF configuration.
  183. */
  184. u16 bnx2x_get_mf_speed(struct bnx2x *bp);
  185. /**
  186. * bnx2x_msix_sp_int - MSI-X slowpath interrupt handler
  187. *
  188. * @irq: irq number
  189. * @dev_instance: private instance
  190. */
  191. irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance);
  192. /**
  193. * bnx2x_interrupt - non MSI-X interrupt handler
  194. *
  195. * @irq: irq number
  196. * @dev_instance: private instance
  197. */
  198. irqreturn_t bnx2x_interrupt(int irq, void *dev_instance);
  199. #ifdef BCM_CNIC
  200. /**
  201. * bnx2x_cnic_notify - send command to cnic driver
  202. *
  203. * @bp: driver handle
  204. * @cmd: command
  205. */
  206. int bnx2x_cnic_notify(struct bnx2x *bp, int cmd);
  207. /**
  208. * bnx2x_setup_cnic_irq_info - provides cnic with IRQ information
  209. *
  210. * @bp: driver handle
  211. */
  212. void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
  213. #endif
  214. /**
  215. * bnx2x_int_enable - enable HW interrupts.
  216. *
  217. * @bp: driver handle
  218. */
  219. void bnx2x_int_enable(struct bnx2x *bp);
  220. /**
  221. * bnx2x_int_disable_sync - disable interrupts.
  222. *
  223. * @bp: driver handle
  224. * @disable_hw: true, disable HW interrupts.
  225. *
  226. * This function ensures that there are no
  227. * ISRs or SP DPCs (sp_task) are running after it returns.
  228. */
  229. void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw);
  230. /**
  231. * bnx2x_nic_init - init driver internals.
  232. *
  233. * @bp: driver handle
  234. * @load_code: COMMON, PORT or FUNCTION
  235. *
  236. * Initializes:
  237. * - rings
  238. * - status blocks
  239. * - etc.
  240. */
  241. void bnx2x_nic_init(struct bnx2x *bp, u32 load_code);
  242. /**
  243. * bnx2x_alloc_mem - allocate driver's memory.
  244. *
  245. * @bp: driver handle
  246. */
  247. int bnx2x_alloc_mem(struct bnx2x *bp);
  248. /**
  249. * bnx2x_free_mem - release driver's memory.
  250. *
  251. * @bp: driver handle
  252. */
  253. void bnx2x_free_mem(struct bnx2x *bp);
  254. /**
  255. * bnx2x_set_num_queues - set number of queues according to mode.
  256. *
  257. * @bp: driver handle
  258. */
  259. void bnx2x_set_num_queues(struct bnx2x *bp);
  260. /**
  261. * bnx2x_chip_cleanup - cleanup chip internals.
  262. *
  263. * @bp: driver handle
  264. * @unload_mode: COMMON, PORT, FUNCTION
  265. *
  266. * - Cleanup MAC configuration.
  267. * - Closes clients.
  268. * - etc.
  269. */
  270. void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode);
  271. /**
  272. * bnx2x_acquire_hw_lock - acquire HW lock.
  273. *
  274. * @bp: driver handle
  275. * @resource: resource bit which was locked
  276. */
  277. int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource);
  278. /**
  279. * bnx2x_release_hw_lock - release HW lock.
  280. *
  281. * @bp: driver handle
  282. * @resource: resource bit which was locked
  283. */
  284. int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource);
  285. /**
  286. * bnx2x_release_leader_lock - release recovery leader lock
  287. *
  288. * @bp: driver handle
  289. */
  290. int bnx2x_release_leader_lock(struct bnx2x *bp);
  291. /**
  292. * bnx2x_set_eth_mac - configure eth MAC address in the HW
  293. *
  294. * @bp: driver handle
  295. * @set: set or clear
  296. *
  297. * Configures according to the value in netdev->dev_addr.
  298. */
  299. int bnx2x_set_eth_mac(struct bnx2x *bp, bool set);
  300. /**
  301. * bnx2x_set_rx_mode - set MAC filtering configurations.
  302. *
  303. * @dev: netdevice
  304. *
  305. * called with netif_tx_lock from dev_mcast.c
  306. * If bp->state is OPEN, should be called with
  307. * netif_addr_lock_bh()
  308. */
  309. void bnx2x_set_rx_mode(struct net_device *dev);
  310. /**
  311. * bnx2x_set_storm_rx_mode - configure MAC filtering rules in a FW.
  312. *
  313. * @bp: driver handle
  314. *
  315. * If bp->state is OPEN, should be called with
  316. * netif_addr_lock_bh().
  317. */
  318. void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
  319. /**
  320. * bnx2x_set_q_rx_mode - configures rx_mode for a single queue.
  321. *
  322. * @bp: driver handle
  323. * @cl_id: client id
  324. * @rx_mode_flags: rx mode configuration
  325. * @rx_accept_flags: rx accept configuration
  326. * @tx_accept_flags: tx accept configuration (tx switch)
  327. * @ramrod_flags: ramrod configuration
  328. */
  329. void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id,
  330. unsigned long rx_mode_flags,
  331. unsigned long rx_accept_flags,
  332. unsigned long tx_accept_flags,
  333. unsigned long ramrod_flags);
  334. /* Parity errors related */
  335. void bnx2x_inc_load_cnt(struct bnx2x *bp);
  336. u32 bnx2x_dec_load_cnt(struct bnx2x *bp);
  337. bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print);
  338. bool bnx2x_reset_is_done(struct bnx2x *bp, int engine);
  339. void bnx2x_set_reset_in_progress(struct bnx2x *bp);
  340. void bnx2x_set_reset_global(struct bnx2x *bp);
  341. void bnx2x_disable_close_the_gate(struct bnx2x *bp);
  342. /**
  343. * bnx2x_sp_event - handle ramrods completion.
  344. *
  345. * @fp: fastpath handle for the event
  346. * @rr_cqe: eth_rx_cqe
  347. */
  348. void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe);
  349. /**
  350. * bnx2x_ilt_set_info - prepare ILT configurations.
  351. *
  352. * @bp: driver handle
  353. */
  354. void bnx2x_ilt_set_info(struct bnx2x *bp);
  355. /**
  356. * bnx2x_dcbx_init - initialize dcbx protocol.
  357. *
  358. * @bp: driver handle
  359. */
  360. void bnx2x_dcbx_init(struct bnx2x *bp);
  361. /**
  362. * bnx2x_set_power_state - set power state to the requested value.
  363. *
  364. * @bp: driver handle
  365. * @state: required state D0 or D3hot
  366. *
  367. * Currently only D0 and D3hot are supported.
  368. */
  369. int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state);
  370. /**
  371. * bnx2x_update_max_mf_config - update MAX part of MF configuration in HW.
  372. *
  373. * @bp: driver handle
  374. * @value: new value
  375. */
  376. void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value);
  377. /* Error handling */
  378. void bnx2x_panic_dump(struct bnx2x *bp);
  379. void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl);
  380. /* dev_close main block */
  381. int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode);
  382. /* dev_open main block */
  383. int bnx2x_nic_load(struct bnx2x *bp, int load_mode);
  384. /* hard_xmit callback */
  385. netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev);
  386. /* setup_tc callback */
  387. int bnx2x_setup_tc(struct net_device *dev, u8 num_tc);
  388. /* select_queue callback */
  389. u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb);
  390. /* reload helper */
  391. int bnx2x_reload_if_running(struct net_device *dev);
  392. int bnx2x_change_mac_addr(struct net_device *dev, void *p);
  393. /* NAPI poll Rx part */
  394. int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget);
  395. void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp,
  396. u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod);
  397. /* NAPI poll Tx part */
  398. int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata);
  399. /* suspend/resume callbacks */
  400. int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state);
  401. int bnx2x_resume(struct pci_dev *pdev);
  402. /* Release IRQ vectors */
  403. void bnx2x_free_irq(struct bnx2x *bp);
  404. void bnx2x_free_fp_mem(struct bnx2x *bp);
  405. int bnx2x_alloc_fp_mem(struct bnx2x *bp);
  406. void bnx2x_init_rx_rings(struct bnx2x *bp);
  407. void bnx2x_free_skbs(struct bnx2x *bp);
  408. void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw);
  409. void bnx2x_netif_start(struct bnx2x *bp);
  410. /**
  411. * bnx2x_enable_msix - set msix configuration.
  412. *
  413. * @bp: driver handle
  414. *
  415. * fills msix_table, requests vectors, updates num_queues
  416. * according to number of available vectors.
  417. */
  418. int bnx2x_enable_msix(struct bnx2x *bp);
  419. /**
  420. * bnx2x_enable_msi - request msi mode from OS, updated internals accordingly
  421. *
  422. * @bp: driver handle
  423. */
  424. int bnx2x_enable_msi(struct bnx2x *bp);
  425. /**
  426. * bnx2x_poll - NAPI callback
  427. *
  428. * @napi: napi structure
  429. * @budget:
  430. *
  431. */
  432. int bnx2x_poll(struct napi_struct *napi, int budget);
  433. /**
  434. * bnx2x_alloc_mem_bp - allocate memories outsize main driver structure
  435. *
  436. * @bp: driver handle
  437. */
  438. int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp);
  439. /**
  440. * bnx2x_free_mem_bp - release memories outsize main driver structure
  441. *
  442. * @bp: driver handle
  443. */
  444. void bnx2x_free_mem_bp(struct bnx2x *bp);
  445. /**
  446. * bnx2x_change_mtu - change mtu netdev callback
  447. *
  448. * @dev: net device
  449. * @new_mtu: requested mtu
  450. *
  451. */
  452. int bnx2x_change_mtu(struct net_device *dev, int new_mtu);
  453. u32 bnx2x_fix_features(struct net_device *dev, u32 features);
  454. int bnx2x_set_features(struct net_device *dev, u32 features);
  455. /**
  456. * bnx2x_tx_timeout - tx timeout netdev callback
  457. *
  458. * @dev: net device
  459. */
  460. void bnx2x_tx_timeout(struct net_device *dev);
  461. /*********************** Inlines **********************************/
  462. /*********************** Fast path ********************************/
  463. static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
  464. {
  465. barrier(); /* status block is written to by the chip */
  466. fp->fp_hc_idx = fp->sb_running_index[SM_RX_ID];
  467. }
  468. static inline void bnx2x_update_rx_prod_gen(struct bnx2x *bp,
  469. struct bnx2x_fastpath *fp, u16 bd_prod,
  470. u16 rx_comp_prod, u16 rx_sge_prod, u32 start)
  471. {
  472. struct ustorm_eth_rx_producers rx_prods = {0};
  473. u32 i;
  474. /* Update producers */
  475. rx_prods.bd_prod = bd_prod;
  476. rx_prods.cqe_prod = rx_comp_prod;
  477. rx_prods.sge_prod = rx_sge_prod;
  478. /*
  479. * Make sure that the BD and SGE data is updated before updating the
  480. * producers since FW might read the BD/SGE right after the producer
  481. * is updated.
  482. * This is only applicable for weak-ordered memory model archs such
  483. * as IA-64. The following barrier is also mandatory since FW will
  484. * assumes BDs must have buffers.
  485. */
  486. wmb();
  487. for (i = 0; i < sizeof(rx_prods)/4; i++)
  488. REG_WR(bp, start + i*4, ((u32 *)&rx_prods)[i]);
  489. mmiowb(); /* keep prod updates ordered */
  490. DP(NETIF_MSG_RX_STATUS,
  491. "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n",
  492. fp->index, bd_prod, rx_comp_prod, rx_sge_prod);
  493. }
  494. static inline void bnx2x_igu_ack_sb_gen(struct bnx2x *bp, u8 igu_sb_id,
  495. u8 segment, u16 index, u8 op,
  496. u8 update, u32 igu_addr)
  497. {
  498. struct igu_regular cmd_data = {0};
  499. cmd_data.sb_id_and_flags =
  500. ((index << IGU_REGULAR_SB_INDEX_SHIFT) |
  501. (segment << IGU_REGULAR_SEGMENT_ACCESS_SHIFT) |
  502. (update << IGU_REGULAR_BUPDATE_SHIFT) |
  503. (op << IGU_REGULAR_ENABLE_INT_SHIFT));
  504. DP(NETIF_MSG_HW, "write 0x%08x to IGU addr 0x%x\n",
  505. cmd_data.sb_id_and_flags, igu_addr);
  506. REG_WR(bp, igu_addr, cmd_data.sb_id_and_flags);
  507. /* Make sure that ACK is written */
  508. mmiowb();
  509. barrier();
  510. }
  511. static inline void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func,
  512. u8 idu_sb_id, bool is_Pf)
  513. {
  514. u32 data, ctl, cnt = 100;
  515. u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
  516. u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
  517. u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4;
  518. u32 sb_bit = 1 << (idu_sb_id%32);
  519. u32 func_encode = func |
  520. ((is_Pf == true ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT);
  521. u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
  522. /* Not supported in BC mode */
  523. if (CHIP_INT_MODE_IS_BC(bp))
  524. return;
  525. data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup
  526. << IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
  527. IGU_REGULAR_CLEANUP_SET |
  528. IGU_REGULAR_BCLEANUP;
  529. ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT |
  530. func_encode << IGU_CTRL_REG_FID_SHIFT |
  531. IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT;
  532. DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
  533. data, igu_addr_data);
  534. REG_WR(bp, igu_addr_data, data);
  535. mmiowb();
  536. barrier();
  537. DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
  538. ctl, igu_addr_ctl);
  539. REG_WR(bp, igu_addr_ctl, ctl);
  540. mmiowb();
  541. barrier();
  542. /* wait for clean up to finish */
  543. while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt)
  544. msleep(20);
  545. if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) {
  546. DP(NETIF_MSG_HW, "Unable to finish IGU cleanup: "
  547. "idu_sb_id %d offset %d bit %d (cnt %d)\n",
  548. idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt);
  549. }
  550. }
  551. static inline void bnx2x_hc_ack_sb(struct bnx2x *bp, u8 sb_id,
  552. u8 storm, u16 index, u8 op, u8 update)
  553. {
  554. u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
  555. COMMAND_REG_INT_ACK);
  556. struct igu_ack_register igu_ack;
  557. igu_ack.status_block_index = index;
  558. igu_ack.sb_id_and_flags =
  559. ((sb_id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) |
  560. (storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) |
  561. (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
  562. (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
  563. DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
  564. (*(u32 *)&igu_ack), hc_addr);
  565. REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
  566. /* Make sure that ACK is written */
  567. mmiowb();
  568. barrier();
  569. }
  570. static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 storm,
  571. u16 index, u8 op, u8 update)
  572. {
  573. if (bp->common.int_block == INT_BLOCK_HC)
  574. bnx2x_hc_ack_sb(bp, igu_sb_id, storm, index, op, update);
  575. else {
  576. u8 segment;
  577. if (CHIP_INT_MODE_IS_BC(bp))
  578. segment = storm;
  579. else if (igu_sb_id != bp->igu_dsb_id)
  580. segment = IGU_SEG_ACCESS_DEF;
  581. else if (storm == ATTENTION_ID)
  582. segment = IGU_SEG_ACCESS_ATTN;
  583. else
  584. segment = IGU_SEG_ACCESS_DEF;
  585. bnx2x_igu_ack_sb(bp, igu_sb_id, segment, index, op, update);
  586. }
  587. }
  588. static inline u16 bnx2x_hc_ack_int(struct bnx2x *bp)
  589. {
  590. u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
  591. COMMAND_REG_SIMD_MASK);
  592. u32 result = REG_RD(bp, hc_addr);
  593. DP(BNX2X_MSG_OFF, "read 0x%08x from HC addr 0x%x\n",
  594. result, hc_addr);
  595. barrier();
  596. return result;
  597. }
  598. static inline u16 bnx2x_igu_ack_int(struct bnx2x *bp)
  599. {
  600. u32 igu_addr = (BAR_IGU_INTMEM + IGU_REG_SISR_MDPC_WMASK_LSB_UPPER*8);
  601. u32 result = REG_RD(bp, igu_addr);
  602. DP(NETIF_MSG_HW, "read 0x%08x from IGU addr 0x%x\n",
  603. result, igu_addr);
  604. barrier();
  605. return result;
  606. }
  607. static inline u16 bnx2x_ack_int(struct bnx2x *bp)
  608. {
  609. barrier();
  610. if (bp->common.int_block == INT_BLOCK_HC)
  611. return bnx2x_hc_ack_int(bp);
  612. else
  613. return bnx2x_igu_ack_int(bp);
  614. }
  615. static inline int bnx2x_has_tx_work_unload(struct bnx2x_fp_txdata *txdata)
  616. {
  617. /* Tell compiler that consumer and producer can change */
  618. barrier();
  619. return txdata->tx_pkt_prod != txdata->tx_pkt_cons;
  620. }
  621. static inline u16 bnx2x_tx_avail(struct bnx2x *bp,
  622. struct bnx2x_fp_txdata *txdata)
  623. {
  624. s16 used;
  625. u16 prod;
  626. u16 cons;
  627. prod = txdata->tx_bd_prod;
  628. cons = txdata->tx_bd_cons;
  629. /* NUM_TX_RINGS = number of "next-page" entries
  630. It will be used as a threshold */
  631. used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS;
  632. #ifdef BNX2X_STOP_ON_ERROR
  633. WARN_ON(used < 0);
  634. WARN_ON(used > bp->tx_ring_size);
  635. WARN_ON((bp->tx_ring_size - used) > MAX_TX_AVAIL);
  636. #endif
  637. return (s16)(bp->tx_ring_size) - used;
  638. }
  639. static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata)
  640. {
  641. u16 hw_cons;
  642. /* Tell compiler that status block fields can change */
  643. barrier();
  644. hw_cons = le16_to_cpu(*txdata->tx_cons_sb);
  645. return hw_cons != txdata->tx_pkt_cons;
  646. }
  647. static inline bool bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
  648. {
  649. u8 cos;
  650. for_each_cos_in_tx_queue(fp, cos)
  651. if (bnx2x_tx_queue_has_work(&fp->txdata[cos]))
  652. return true;
  653. return false;
  654. }
  655. static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
  656. {
  657. u16 rx_cons_sb;
  658. /* Tell compiler that status block fields can change */
  659. barrier();
  660. rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
  661. if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
  662. rx_cons_sb++;
  663. return (fp->rx_comp_cons != rx_cons_sb);
  664. }
  665. /**
  666. * bnx2x_tx_disable - disables tx from stack point of view
  667. *
  668. * @bp: driver handle
  669. */
  670. static inline void bnx2x_tx_disable(struct bnx2x *bp)
  671. {
  672. netif_tx_disable(bp->dev);
  673. netif_carrier_off(bp->dev);
  674. }
  675. static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
  676. struct bnx2x_fastpath *fp, u16 index)
  677. {
  678. struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
  679. struct page *page = sw_buf->page;
  680. struct eth_rx_sge *sge = &fp->rx_sge_ring[index];
  681. /* Skip "next page" elements */
  682. if (!page)
  683. return;
  684. dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(sw_buf, mapping),
  685. SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE);
  686. __free_pages(page, PAGES_PER_SGE_SHIFT);
  687. sw_buf->page = NULL;
  688. sge->addr_hi = 0;
  689. sge->addr_lo = 0;
  690. }
  691. static inline void bnx2x_add_all_napi(struct bnx2x *bp)
  692. {
  693. int i;
  694. /* Add NAPI objects */
  695. for_each_rx_queue(bp, i)
  696. netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
  697. bnx2x_poll, BNX2X_NAPI_WEIGHT);
  698. }
  699. static inline void bnx2x_del_all_napi(struct bnx2x *bp)
  700. {
  701. int i;
  702. for_each_rx_queue(bp, i)
  703. netif_napi_del(&bnx2x_fp(bp, i, napi));
  704. }
  705. static inline void bnx2x_disable_msi(struct bnx2x *bp)
  706. {
  707. if (bp->flags & USING_MSIX_FLAG) {
  708. pci_disable_msix(bp->pdev);
  709. bp->flags &= ~USING_MSIX_FLAG;
  710. } else if (bp->flags & USING_MSI_FLAG) {
  711. pci_disable_msi(bp->pdev);
  712. bp->flags &= ~USING_MSI_FLAG;
  713. }
  714. }
  715. static inline int bnx2x_calc_num_queues(struct bnx2x *bp)
  716. {
  717. return num_queues ?
  718. min_t(int, num_queues, BNX2X_MAX_QUEUES(bp)) :
  719. min_t(int, num_online_cpus(), BNX2X_MAX_QUEUES(bp));
  720. }
  721. static inline void bnx2x_clear_sge_mask_next_elems(struct bnx2x_fastpath *fp)
  722. {
  723. int i, j;
  724. for (i = 1; i <= NUM_RX_SGE_PAGES; i++) {
  725. int idx = RX_SGE_CNT * i - 1;
  726. for (j = 0; j < 2; j++) {
  727. BIT_VEC64_CLEAR_BIT(fp->sge_mask, idx);
  728. idx--;
  729. }
  730. }
  731. }
  732. static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
  733. {
  734. /* Set the mask to all 1-s: it's faster to compare to 0 than to 0xf-s */
  735. memset(fp->sge_mask, 0xff,
  736. (NUM_RX_SGE >> BIT_VEC64_ELEM_SHIFT)*sizeof(u64));
  737. /* Clear the two last indices in the page to 1:
  738. these are the indices that correspond to the "next" element,
  739. hence will never be indicated and should be removed from
  740. the calculations. */
  741. bnx2x_clear_sge_mask_next_elems(fp);
  742. }
  743. static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp,
  744. struct bnx2x_fastpath *fp, u16 index)
  745. {
  746. struct page *page = alloc_pages(GFP_ATOMIC, PAGES_PER_SGE_SHIFT);
  747. struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
  748. struct eth_rx_sge *sge = &fp->rx_sge_ring[index];
  749. dma_addr_t mapping;
  750. if (unlikely(page == NULL))
  751. return -ENOMEM;
  752. mapping = dma_map_page(&bp->pdev->dev, page, 0,
  753. SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE);
  754. if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
  755. __free_pages(page, PAGES_PER_SGE_SHIFT);
  756. return -ENOMEM;
  757. }
  758. sw_buf->page = page;
  759. dma_unmap_addr_set(sw_buf, mapping, mapping);
  760. sge->addr_hi = cpu_to_le32(U64_HI(mapping));
  761. sge->addr_lo = cpu_to_le32(U64_LO(mapping));
  762. return 0;
  763. }
  764. static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
  765. struct bnx2x_fastpath *fp, u16 index)
  766. {
  767. struct sk_buff *skb;
  768. struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[index];
  769. struct eth_rx_bd *rx_bd = &fp->rx_desc_ring[index];
  770. dma_addr_t mapping;
  771. skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size);
  772. if (unlikely(skb == NULL))
  773. return -ENOMEM;
  774. mapping = dma_map_single(&bp->pdev->dev, skb->data, fp->rx_buf_size,
  775. DMA_FROM_DEVICE);
  776. if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
  777. dev_kfree_skb_any(skb);
  778. return -ENOMEM;
  779. }
  780. rx_buf->skb = skb;
  781. dma_unmap_addr_set(rx_buf, mapping, mapping);
  782. rx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
  783. rx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
  784. return 0;
  785. }
  786. /* note that we are not allocating a new skb,
  787. * we are just moving one from cons to prod
  788. * we are not creating a new mapping,
  789. * so there is no need to check for dma_mapping_error().
  790. */
  791. static inline void bnx2x_reuse_rx_skb(struct bnx2x_fastpath *fp,
  792. u16 cons, u16 prod)
  793. {
  794. struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons];
  795. struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod];
  796. struct eth_rx_bd *cons_bd = &fp->rx_desc_ring[cons];
  797. struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod];
  798. dma_unmap_addr_set(prod_rx_buf, mapping,
  799. dma_unmap_addr(cons_rx_buf, mapping));
  800. prod_rx_buf->skb = cons_rx_buf->skb;
  801. *prod_bd = *cons_bd;
  802. }
  803. /************************* Init ******************************************/
  804. /**
  805. * bnx2x_func_start - init function
  806. *
  807. * @bp: driver handle
  808. *
  809. * Must be called before sending CLIENT_SETUP for the first client.
  810. */
  811. static inline int bnx2x_func_start(struct bnx2x *bp)
  812. {
  813. struct bnx2x_func_state_params func_params = {0};
  814. struct bnx2x_func_start_params *start_params =
  815. &func_params.params.start;
  816. /* Prepare parameters for function state transitions */
  817. __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
  818. func_params.f_obj = &bp->func_obj;
  819. func_params.cmd = BNX2X_F_CMD_START;
  820. /* Function parameters */
  821. start_params->mf_mode = bp->mf_mode;
  822. start_params->sd_vlan_tag = bp->mf_ov;
  823. if (CHIP_IS_E1x(bp))
  824. start_params->network_cos_mode = OVERRIDE_COS;
  825. else
  826. start_params->network_cos_mode = STATIC_COS;
  827. return bnx2x_func_state_change(bp, &func_params);
  828. }
  829. /**
  830. * bnx2x_set_fw_mac_addr - fill in a MAC address in FW format
  831. *
  832. * @fw_hi: pointer to upper part
  833. * @fw_mid: pointer to middle part
  834. * @fw_lo: pointer to lower part
  835. * @mac: pointer to MAC address
  836. */
  837. static inline void bnx2x_set_fw_mac_addr(u16 *fw_hi, u16 *fw_mid, u16 *fw_lo,
  838. u8 *mac)
  839. {
  840. ((u8 *)fw_hi)[0] = mac[1];
  841. ((u8 *)fw_hi)[1] = mac[0];
  842. ((u8 *)fw_mid)[0] = mac[3];
  843. ((u8 *)fw_mid)[1] = mac[2];
  844. ((u8 *)fw_lo)[0] = mac[5];
  845. ((u8 *)fw_lo)[1] = mac[4];
  846. }
  847. static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
  848. struct bnx2x_fastpath *fp, int last)
  849. {
  850. int i;
  851. if (fp->disable_tpa)
  852. return;
  853. for (i = 0; i < last; i++)
  854. bnx2x_free_rx_sge(bp, fp, i);
  855. }
  856. static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
  857. struct bnx2x_fastpath *fp, int last)
  858. {
  859. int i;
  860. for (i = 0; i < last; i++) {
  861. struct bnx2x_agg_info *tpa_info = &fp->tpa_info[i];
  862. struct sw_rx_bd *first_buf = &tpa_info->first_buf;
  863. struct sk_buff *skb = first_buf->skb;
  864. if (skb == NULL) {
  865. DP(NETIF_MSG_IFDOWN, "tpa bin %d empty on free\n", i);
  866. continue;
  867. }
  868. if (tpa_info->tpa_state == BNX2X_TPA_START)
  869. dma_unmap_single(&bp->pdev->dev,
  870. dma_unmap_addr(first_buf, mapping),
  871. fp->rx_buf_size, DMA_FROM_DEVICE);
  872. dev_kfree_skb(skb);
  873. first_buf->skb = NULL;
  874. }
  875. }
  876. static inline void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata)
  877. {
  878. int i;
  879. for (i = 1; i <= NUM_TX_RINGS; i++) {
  880. struct eth_tx_next_bd *tx_next_bd =
  881. &txdata->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
  882. tx_next_bd->addr_hi =
  883. cpu_to_le32(U64_HI(txdata->tx_desc_mapping +
  884. BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
  885. tx_next_bd->addr_lo =
  886. cpu_to_le32(U64_LO(txdata->tx_desc_mapping +
  887. BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
  888. }
  889. SET_FLAG(txdata->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
  890. txdata->tx_db.data.zero_fill1 = 0;
  891. txdata->tx_db.data.prod = 0;
  892. txdata->tx_pkt_prod = 0;
  893. txdata->tx_pkt_cons = 0;
  894. txdata->tx_bd_prod = 0;
  895. txdata->tx_bd_cons = 0;
  896. txdata->tx_pkt = 0;
  897. }
  898. static inline void bnx2x_init_tx_rings(struct bnx2x *bp)
  899. {
  900. int i;
  901. u8 cos;
  902. for_each_tx_queue(bp, i)
  903. for_each_cos_in_tx_queue(&bp->fp[i], cos)
  904. bnx2x_init_tx_ring_one(&bp->fp[i].txdata[cos]);
  905. }
  906. static inline void bnx2x_set_next_page_rx_bd(struct bnx2x_fastpath *fp)
  907. {
  908. int i;
  909. for (i = 1; i <= NUM_RX_RINGS; i++) {
  910. struct eth_rx_bd *rx_bd;
  911. rx_bd = &fp->rx_desc_ring[RX_DESC_CNT * i - 2];
  912. rx_bd->addr_hi =
  913. cpu_to_le32(U64_HI(fp->rx_desc_mapping +
  914. BCM_PAGE_SIZE*(i % NUM_RX_RINGS)));
  915. rx_bd->addr_lo =
  916. cpu_to_le32(U64_LO(fp->rx_desc_mapping +
  917. BCM_PAGE_SIZE*(i % NUM_RX_RINGS)));
  918. }
  919. }
  920. static inline void bnx2x_set_next_page_sgl(struct bnx2x_fastpath *fp)
  921. {
  922. int i;
  923. for (i = 1; i <= NUM_RX_SGE_PAGES; i++) {
  924. struct eth_rx_sge *sge;
  925. sge = &fp->rx_sge_ring[RX_SGE_CNT * i - 2];
  926. sge->addr_hi =
  927. cpu_to_le32(U64_HI(fp->rx_sge_mapping +
  928. BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES)));
  929. sge->addr_lo =
  930. cpu_to_le32(U64_LO(fp->rx_sge_mapping +
  931. BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES)));
  932. }
  933. }
  934. static inline void bnx2x_set_next_page_rx_cq(struct bnx2x_fastpath *fp)
  935. {
  936. int i;
  937. for (i = 1; i <= NUM_RCQ_RINGS; i++) {
  938. struct eth_rx_cqe_next_page *nextpg;
  939. nextpg = (struct eth_rx_cqe_next_page *)
  940. &fp->rx_comp_ring[RCQ_DESC_CNT * i - 1];
  941. nextpg->addr_hi =
  942. cpu_to_le32(U64_HI(fp->rx_comp_mapping +
  943. BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS)));
  944. nextpg->addr_lo =
  945. cpu_to_le32(U64_LO(fp->rx_comp_mapping +
  946. BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS)));
  947. }
  948. }
  949. /* Returns the number of actually allocated BDs */
  950. static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
  951. int rx_ring_size)
  952. {
  953. struct bnx2x *bp = fp->bp;
  954. u16 ring_prod, cqe_ring_prod;
  955. int i;
  956. fp->rx_comp_cons = 0;
  957. cqe_ring_prod = ring_prod = 0;
  958. /* This routine is called only during fo init so
  959. * fp->eth_q_stats.rx_skb_alloc_failed = 0
  960. */
  961. for (i = 0; i < rx_ring_size; i++) {
  962. if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
  963. fp->eth_q_stats.rx_skb_alloc_failed++;
  964. continue;
  965. }
  966. ring_prod = NEXT_RX_IDX(ring_prod);
  967. cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
  968. WARN_ON(ring_prod <= (i - fp->eth_q_stats.rx_skb_alloc_failed));
  969. }
  970. if (fp->eth_q_stats.rx_skb_alloc_failed)
  971. BNX2X_ERR("was only able to allocate "
  972. "%d rx skbs on queue[%d]\n",
  973. (i - fp->eth_q_stats.rx_skb_alloc_failed), fp->index);
  974. fp->rx_bd_prod = ring_prod;
  975. /* Limit the CQE producer by the CQE ring size */
  976. fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT,
  977. cqe_ring_prod);
  978. fp->rx_pkt = fp->rx_calls = 0;
  979. return i - fp->eth_q_stats.rx_skb_alloc_failed;
  980. }
  981. /* Statistics ID are global per chip/path, while Client IDs for E1x are per
  982. * port.
  983. */
  984. static inline u8 bnx2x_stats_id(struct bnx2x_fastpath *fp)
  985. {
  986. if (!CHIP_IS_E1x(fp->bp))
  987. return fp->cl_id;
  988. else
  989. return fp->cl_id + BP_PORT(fp->bp) * FP_SB_MAX_E1x;
  990. }
  991. static inline void bnx2x_init_vlan_mac_fp_objs(struct bnx2x_fastpath *fp,
  992. bnx2x_obj_type obj_type)
  993. {
  994. struct bnx2x *bp = fp->bp;
  995. /* Configure classification DBs */
  996. bnx2x_init_mac_obj(bp, &fp->mac_obj, fp->cl_id, fp->cid,
  997. BP_FUNC(bp), bnx2x_sp(bp, mac_rdata),
  998. bnx2x_sp_mapping(bp, mac_rdata),
  999. BNX2X_FILTER_MAC_PENDING,
  1000. &bp->sp_state, obj_type,
  1001. &bp->macs_pool);
  1002. }
  1003. /**
  1004. * bnx2x_get_path_func_num - get number of active functions
  1005. *
  1006. * @bp: driver handle
  1007. *
  1008. * Calculates the number of active (not hidden) functions on the
  1009. * current path.
  1010. */
  1011. static inline u8 bnx2x_get_path_func_num(struct bnx2x *bp)
  1012. {
  1013. u8 func_num = 0, i;
  1014. /* 57710 has only one function per-port */
  1015. if (CHIP_IS_E1(bp))
  1016. return 1;
  1017. /* Calculate a number of functions enabled on the current
  1018. * PATH/PORT.
  1019. */
  1020. if (CHIP_REV_IS_SLOW(bp)) {
  1021. if (IS_MF(bp))
  1022. func_num = 4;
  1023. else
  1024. func_num = 2;
  1025. } else {
  1026. for (i = 0; i < E1H_FUNC_MAX / 2; i++) {
  1027. u32 func_config =
  1028. MF_CFG_RD(bp,
  1029. func_mf_config[BP_PORT(bp) + 2 * i].
  1030. config);
  1031. func_num +=
  1032. ((func_config & FUNC_MF_CFG_FUNC_HIDE) ? 0 : 1);
  1033. }
  1034. }
  1035. WARN_ON(!func_num);
  1036. return func_num;
  1037. }
  1038. static inline void bnx2x_init_bp_objs(struct bnx2x *bp)
  1039. {
  1040. /* RX_MODE controlling object */
  1041. bnx2x_init_rx_mode_obj(bp, &bp->rx_mode_obj);
  1042. /* multicast configuration controlling object */
  1043. bnx2x_init_mcast_obj(bp, &bp->mcast_obj, bp->fp->cl_id, bp->fp->cid,
  1044. BP_FUNC(bp), BP_FUNC(bp),
  1045. bnx2x_sp(bp, mcast_rdata),
  1046. bnx2x_sp_mapping(bp, mcast_rdata),
  1047. BNX2X_FILTER_MCAST_PENDING, &bp->sp_state,
  1048. BNX2X_OBJ_TYPE_RX);
  1049. /* Setup CAM credit pools */
  1050. bnx2x_init_mac_credit_pool(bp, &bp->macs_pool, BP_FUNC(bp),
  1051. bnx2x_get_path_func_num(bp));
  1052. /* RSS configuration object */
  1053. bnx2x_init_rss_config_obj(bp, &bp->rss_conf_obj, bp->fp->cl_id,
  1054. bp->fp->cid, BP_FUNC(bp), BP_FUNC(bp),
  1055. bnx2x_sp(bp, rss_rdata),
  1056. bnx2x_sp_mapping(bp, rss_rdata),
  1057. BNX2X_FILTER_RSS_CONF_PENDING, &bp->sp_state,
  1058. BNX2X_OBJ_TYPE_RX);
  1059. }
  1060. static inline u8 bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
  1061. {
  1062. if (CHIP_IS_E1x(fp->bp))
  1063. return fp->cl_id + BP_PORT(fp->bp) * ETH_MAX_RX_CLIENTS_E1H;
  1064. else
  1065. return fp->cl_id;
  1066. }
  1067. static inline u32 bnx2x_rx_ustorm_prods_offset(struct bnx2x_fastpath *fp)
  1068. {
  1069. struct bnx2x *bp = fp->bp;
  1070. if (!CHIP_IS_E1x(bp))
  1071. return USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
  1072. else
  1073. return USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), fp->cl_id);
  1074. }
  1075. static inline void bnx2x_init_txdata(struct bnx2x *bp,
  1076. struct bnx2x_fp_txdata *txdata, u32 cid, int txq_index,
  1077. __le16 *tx_cons_sb)
  1078. {
  1079. txdata->cid = cid;
  1080. txdata->txq_index = txq_index;
  1081. txdata->tx_cons_sb = tx_cons_sb;
  1082. DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d",
  1083. txdata->cid, txdata->txq_index);
  1084. }
  1085. #ifdef BCM_CNIC
  1086. static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx)
  1087. {
  1088. return bp->cnic_base_cl_id + cl_idx +
  1089. (bp->pf_num >> 1) * NON_ETH_CONTEXT_USE;
  1090. }
  1091. static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp)
  1092. {
  1093. /* the 'first' id is allocated for the cnic */
  1094. return bp->base_fw_ndsb;
  1095. }
  1096. static inline u8 bnx2x_cnic_igu_sb_id(struct bnx2x *bp)
  1097. {
  1098. return bp->igu_base_sb;
  1099. }
  1100. static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
  1101. {
  1102. struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
  1103. unsigned long q_type = 0;
  1104. bnx2x_fcoe(bp, cl_id) = bnx2x_cnic_eth_cl_id(bp,
  1105. BNX2X_FCOE_ETH_CL_ID_IDX);
  1106. /** Current BNX2X_FCOE_ETH_CID deffinition implies not more than
  1107. * 16 ETH clients per function when CNIC is enabled!
  1108. *
  1109. * Fix it ASAP!!!
  1110. */
  1111. bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID;
  1112. bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID;
  1113. bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id;
  1114. bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX;
  1115. bnx2x_init_txdata(bp, &bnx2x_fcoe(bp, txdata[0]),
  1116. fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX);
  1117. DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)", fp->index);
  1118. /* qZone id equals to FW (per path) client id */
  1119. bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);
  1120. /* init shortcut */
  1121. bnx2x_fcoe(bp, ustorm_rx_prods_offset) =
  1122. bnx2x_rx_ustorm_prods_offset(fp);
  1123. /* Configure Queue State object */
  1124. __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type);
  1125. __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type);
  1126. /* No multi-CoS for FCoE L2 client */
  1127. BUG_ON(fp->max_cos != 1);
  1128. bnx2x_init_queue_obj(bp, &fp->q_obj, fp->cl_id, &fp->cid, 1,
  1129. BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
  1130. bnx2x_sp_mapping(bp, q_rdata), q_type);
  1131. DP(NETIF_MSG_IFUP, "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d "
  1132. "igu_sb %d\n",
  1133. fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
  1134. fp->igu_sb_id);
  1135. }
  1136. #endif
  1137. static inline int bnx2x_clean_tx_queue(struct bnx2x *bp,
  1138. struct bnx2x_fp_txdata *txdata)
  1139. {
  1140. int cnt = 1000;
  1141. while (bnx2x_has_tx_work_unload(txdata)) {
  1142. if (!cnt) {
  1143. BNX2X_ERR("timeout waiting for queue[%d]: "
  1144. "txdata->tx_pkt_prod(%d) != txdata->tx_pkt_cons(%d)\n",
  1145. txdata->txq_index, txdata->tx_pkt_prod,
  1146. txdata->tx_pkt_cons);
  1147. #ifdef BNX2X_STOP_ON_ERROR
  1148. bnx2x_panic();
  1149. return -EBUSY;
  1150. #else
  1151. break;
  1152. #endif
  1153. }
  1154. cnt--;
  1155. usleep_range(1000, 1000);
  1156. }
  1157. return 0;
  1158. }
  1159. int bnx2x_get_link_cfg_idx(struct bnx2x *bp);
  1160. static inline void __storm_memset_struct(struct bnx2x *bp,
  1161. u32 addr, size_t size, u32 *data)
  1162. {
  1163. int i;
  1164. for (i = 0; i < size/4; i++)
  1165. REG_WR(bp, addr + (i * 4), data[i]);
  1166. }
  1167. static inline void storm_memset_func_cfg(struct bnx2x *bp,
  1168. struct tstorm_eth_function_common_config *tcfg,
  1169. u16 abs_fid)
  1170. {
  1171. size_t size = sizeof(struct tstorm_eth_function_common_config);
  1172. u32 addr = BAR_TSTRORM_INTMEM +
  1173. TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid);
  1174. __storm_memset_struct(bp, addr, size, (u32 *)tcfg);
  1175. }
  1176. static inline void storm_memset_cmng(struct bnx2x *bp,
  1177. struct cmng_struct_per_port *cmng,
  1178. u8 port)
  1179. {
  1180. size_t size = sizeof(struct cmng_struct_per_port);
  1181. u32 addr = BAR_XSTRORM_INTMEM +
  1182. XSTORM_CMNG_PER_PORT_VARS_OFFSET(port);
  1183. __storm_memset_struct(bp, addr, size, (u32 *)cmng);
  1184. }
  1185. /**
  1186. * bnx2x_wait_sp_comp - wait for the outstanding SP commands.
  1187. *
  1188. * @bp: driver handle
  1189. * @mask: bits that need to be cleared
  1190. */
  1191. static inline bool bnx2x_wait_sp_comp(struct bnx2x *bp, unsigned long mask)
  1192. {
  1193. int tout = 5000; /* Wait for 5 secs tops */
  1194. while (tout--) {
  1195. smp_mb();
  1196. netif_addr_lock_bh(bp->dev);
  1197. if (!(bp->sp_state & mask)) {
  1198. netif_addr_unlock_bh(bp->dev);
  1199. return true;
  1200. }
  1201. netif_addr_unlock_bh(bp->dev);
  1202. usleep_range(1000, 1000);
  1203. }
  1204. smp_mb();
  1205. netif_addr_lock_bh(bp->dev);
  1206. if (bp->sp_state & mask) {
  1207. BNX2X_ERR("Filtering completion timed out. sp_state 0x%lx, "
  1208. "mask 0x%lx\n", bp->sp_state, mask);
  1209. netif_addr_unlock_bh(bp->dev);
  1210. return false;
  1211. }
  1212. netif_addr_unlock_bh(bp->dev);
  1213. return true;
  1214. }
  1215. /**
  1216. * bnx2x_set_ctx_validation - set CDU context validation values
  1217. *
  1218. * @bp: driver handle
  1219. * @cxt: context of the connection on the host memory
  1220. * @cid: SW CID of the connection to be configured
  1221. */
  1222. void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt,
  1223. u32 cid);
  1224. void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id,
  1225. u8 sb_index, u8 disable, u16 usec);
  1226. void bnx2x_acquire_phy_lock(struct bnx2x *bp);
  1227. void bnx2x_release_phy_lock(struct bnx2x *bp);
  1228. /**
  1229. * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration.
  1230. *
  1231. * @bp: driver handle
  1232. * @mf_cfg: MF configuration
  1233. *
  1234. */
  1235. static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg)
  1236. {
  1237. u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
  1238. FUNC_MF_CFG_MAX_BW_SHIFT;
  1239. if (!max_cfg) {
  1240. BNX2X_ERR("Illegal configuration detected for Max BW - "
  1241. "using 100 instead\n");
  1242. max_cfg = 100;
  1243. }
  1244. return max_cfg;
  1245. }
  1246. #endif /* BNX2X_CMN_H */