phy-mxs-usb.c 5.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217
  1. /*
  2. * Copyright 2012 Freescale Semiconductor, Inc.
  3. * Copyright (C) 2012 Marek Vasut <marex@denx.de>
  4. * on behalf of DENX Software Engineering GmbH
  5. *
  6. * The code contained herein is licensed under the GNU General Public
  7. * License. You may obtain a copy of the GNU General Public License
  8. * Version 2 or later at the following locations:
  9. *
  10. * http://www.opensource.org/licenses/gpl-license.html
  11. * http://www.gnu.org/copyleft/gpl.html
  12. */
  13. #include <linux/module.h>
  14. #include <linux/kernel.h>
  15. #include <linux/platform_device.h>
  16. #include <linux/clk.h>
  17. #include <linux/usb/otg.h>
  18. #include <linux/stmp_device.h>
  19. #include <linux/delay.h>
  20. #include <linux/err.h>
  21. #include <linux/io.h>
  22. #define DRIVER_NAME "mxs_phy"
  23. #define HW_USBPHY_PWD 0x00
  24. #define HW_USBPHY_CTRL 0x30
  25. #define HW_USBPHY_CTRL_SET 0x34
  26. #define HW_USBPHY_CTRL_CLR 0x38
  27. #define BM_USBPHY_CTRL_SFTRST BIT(31)
  28. #define BM_USBPHY_CTRL_CLKGATE BIT(30)
  29. #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
  30. #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
  31. #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
  32. struct mxs_phy {
  33. struct usb_phy phy;
  34. struct clk *clk;
  35. };
  36. #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
  37. static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
  38. {
  39. int ret;
  40. void __iomem *base = mxs_phy->phy.io_priv;
  41. ret = stmp_reset_block(base + HW_USBPHY_CTRL);
  42. if (ret)
  43. return ret;
  44. /* Power up the PHY */
  45. writel(0, base + HW_USBPHY_PWD);
  46. /* enable FS/LS device */
  47. writel(BM_USBPHY_CTRL_ENUTMILEVEL2 |
  48. BM_USBPHY_CTRL_ENUTMILEVEL3,
  49. base + HW_USBPHY_CTRL_SET);
  50. return 0;
  51. }
  52. static int mxs_phy_init(struct usb_phy *phy)
  53. {
  54. struct mxs_phy *mxs_phy = to_mxs_phy(phy);
  55. clk_prepare_enable(mxs_phy->clk);
  56. return mxs_phy_hw_init(mxs_phy);
  57. }
  58. static void mxs_phy_shutdown(struct usb_phy *phy)
  59. {
  60. struct mxs_phy *mxs_phy = to_mxs_phy(phy);
  61. writel(BM_USBPHY_CTRL_CLKGATE,
  62. phy->io_priv + HW_USBPHY_CTRL_SET);
  63. clk_disable_unprepare(mxs_phy->clk);
  64. }
  65. static int mxs_phy_suspend(struct usb_phy *x, int suspend)
  66. {
  67. struct mxs_phy *mxs_phy = to_mxs_phy(x);
  68. if (suspend) {
  69. writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
  70. writel(BM_USBPHY_CTRL_CLKGATE,
  71. x->io_priv + HW_USBPHY_CTRL_SET);
  72. clk_disable_unprepare(mxs_phy->clk);
  73. } else {
  74. clk_prepare_enable(mxs_phy->clk);
  75. writel(BM_USBPHY_CTRL_CLKGATE,
  76. x->io_priv + HW_USBPHY_CTRL_CLR);
  77. writel(0, x->io_priv + HW_USBPHY_PWD);
  78. }
  79. return 0;
  80. }
  81. static int mxs_phy_on_connect(struct usb_phy *phy,
  82. enum usb_device_speed speed)
  83. {
  84. dev_dbg(phy->dev, "%s speed device has connected\n",
  85. (speed == USB_SPEED_HIGH) ? "high" : "non-high");
  86. if (speed == USB_SPEED_HIGH)
  87. writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
  88. phy->io_priv + HW_USBPHY_CTRL_SET);
  89. return 0;
  90. }
  91. static int mxs_phy_on_disconnect(struct usb_phy *phy,
  92. enum usb_device_speed speed)
  93. {
  94. dev_dbg(phy->dev, "%s speed device has disconnected\n",
  95. (speed == USB_SPEED_HIGH) ? "high" : "non-high");
  96. if (speed == USB_SPEED_HIGH)
  97. writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
  98. phy->io_priv + HW_USBPHY_CTRL_CLR);
  99. return 0;
  100. }
  101. static int mxs_phy_probe(struct platform_device *pdev)
  102. {
  103. struct resource *res;
  104. void __iomem *base;
  105. struct clk *clk;
  106. struct mxs_phy *mxs_phy;
  107. int ret;
  108. res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  109. base = devm_ioremap_resource(&pdev->dev, res);
  110. if (IS_ERR(base))
  111. return PTR_ERR(base);
  112. clk = devm_clk_get(&pdev->dev, NULL);
  113. if (IS_ERR(clk)) {
  114. dev_err(&pdev->dev,
  115. "can't get the clock, err=%ld", PTR_ERR(clk));
  116. return PTR_ERR(clk);
  117. }
  118. mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
  119. if (!mxs_phy) {
  120. dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
  121. return -ENOMEM;
  122. }
  123. mxs_phy->phy.io_priv = base;
  124. mxs_phy->phy.dev = &pdev->dev;
  125. mxs_phy->phy.label = DRIVER_NAME;
  126. mxs_phy->phy.init = mxs_phy_init;
  127. mxs_phy->phy.shutdown = mxs_phy_shutdown;
  128. mxs_phy->phy.set_suspend = mxs_phy_suspend;
  129. mxs_phy->phy.notify_connect = mxs_phy_on_connect;
  130. mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
  131. mxs_phy->phy.type = USB_PHY_TYPE_USB2;
  132. ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
  133. mxs_phy->clk = clk;
  134. platform_set_drvdata(pdev, &mxs_phy->phy);
  135. ret = usb_add_phy_dev(&mxs_phy->phy);
  136. if (ret)
  137. return ret;
  138. return 0;
  139. }
  140. static int mxs_phy_remove(struct platform_device *pdev)
  141. {
  142. struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
  143. usb_remove_phy(&mxs_phy->phy);
  144. return 0;
  145. }
  146. static const struct of_device_id mxs_phy_dt_ids[] = {
  147. { .compatible = "fsl,imx23-usbphy", },
  148. { /* sentinel */ }
  149. };
  150. MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
  151. static struct platform_driver mxs_phy_driver = {
  152. .probe = mxs_phy_probe,
  153. .remove = mxs_phy_remove,
  154. .driver = {
  155. .name = DRIVER_NAME,
  156. .owner = THIS_MODULE,
  157. .of_match_table = mxs_phy_dt_ids,
  158. },
  159. };
  160. static int __init mxs_phy_module_init(void)
  161. {
  162. return platform_driver_register(&mxs_phy_driver);
  163. }
  164. postcore_initcall(mxs_phy_module_init);
  165. static void __exit mxs_phy_module_exit(void)
  166. {
  167. platform_driver_unregister(&mxs_phy_driver);
  168. }
  169. module_exit(mxs_phy_module_exit);
  170. MODULE_ALIAS("platform:mxs-usb-phy");
  171. MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
  172. MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
  173. MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
  174. MODULE_LICENSE("GPL");