of_serial.c 6.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283
  1. /*
  2. * Serial Port driver for Open Firmware platform devices
  3. *
  4. * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
  5. *
  6. * This program is free software; you can redistribute it and/or
  7. * modify it under the terms of the GNU General Public License
  8. * as published by the Free Software Foundation; either version
  9. * 2 of the License, or (at your option) any later version.
  10. *
  11. */
  12. #include <linux/init.h>
  13. #include <linux/module.h>
  14. #include <linux/slab.h>
  15. #include <linux/delay.h>
  16. #include <linux/serial_core.h>
  17. #include <linux/serial_reg.h>
  18. #include <linux/of_address.h>
  19. #include <linux/of_irq.h>
  20. #include <linux/of_platform.h>
  21. #include <linux/nwpserial.h>
  22. #include <linux/clk.h>
  23. #include "8250/8250.h"
  24. struct of_serial_info {
  25. struct clk *clk;
  26. int type;
  27. int line;
  28. };
  29. #ifdef CONFIG_ARCH_TEGRA
  30. void tegra_serial_handle_break(struct uart_port *p)
  31. {
  32. unsigned int status, tmout = 10000;
  33. do {
  34. status = p->serial_in(p, UART_LSR);
  35. if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
  36. status = p->serial_in(p, UART_RX);
  37. else
  38. break;
  39. if (--tmout == 0)
  40. break;
  41. udelay(1);
  42. } while (1);
  43. }
  44. #else
  45. static inline void tegra_serial_handle_break(struct uart_port *port)
  46. {
  47. }
  48. #endif
  49. /*
  50. * Fill a struct uart_port for a given device node
  51. */
  52. static int of_platform_serial_setup(struct platform_device *ofdev,
  53. int type, struct uart_port *port,
  54. struct of_serial_info *info)
  55. {
  56. struct resource resource;
  57. struct device_node *np = ofdev->dev.of_node;
  58. u32 clk, spd, prop;
  59. int ret;
  60. memset(port, 0, sizeof *port);
  61. if (of_property_read_u32(np, "clock-frequency", &clk)) {
  62. /* Get clk rate through clk driver if present */
  63. info->clk = clk_get(&ofdev->dev, NULL);
  64. if (IS_ERR(info->clk)) {
  65. dev_warn(&ofdev->dev,
  66. "clk or clock-frequency not defined\n");
  67. return PTR_ERR(info->clk);
  68. }
  69. clk_prepare_enable(info->clk);
  70. clk = clk_get_rate(info->clk);
  71. }
  72. /* If current-speed was set, then try not to change it. */
  73. if (of_property_read_u32(np, "current-speed", &spd) == 0)
  74. port->custom_divisor = clk / (16 * spd);
  75. ret = of_address_to_resource(np, 0, &resource);
  76. if (ret) {
  77. dev_warn(&ofdev->dev, "invalid address\n");
  78. goto out;
  79. }
  80. spin_lock_init(&port->lock);
  81. port->mapbase = resource.start;
  82. /* Check for shifted address mapping */
  83. if (of_property_read_u32(np, "reg-offset", &prop) == 0)
  84. port->mapbase += prop;
  85. /* Check for registers offset within the devices address range */
  86. if (of_property_read_u32(np, "reg-shift", &prop) == 0)
  87. port->regshift = prop;
  88. /* Check for fifo size */
  89. if (of_property_read_u32(np, "fifo-size", &prop) == 0)
  90. port->fifosize = prop;
  91. port->irq = irq_of_parse_and_map(np, 0);
  92. port->iotype = UPIO_MEM;
  93. if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
  94. switch (prop) {
  95. case 1:
  96. port->iotype = UPIO_MEM;
  97. break;
  98. case 4:
  99. port->iotype = UPIO_MEM32;
  100. break;
  101. default:
  102. dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
  103. prop);
  104. ret = -EINVAL;
  105. goto out;
  106. }
  107. }
  108. port->type = type;
  109. port->uartclk = clk;
  110. port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
  111. | UPF_FIXED_PORT | UPF_FIXED_TYPE;
  112. if (of_find_property(np, "no-loopback-test", NULL))
  113. port->flags |= UPF_SKIP_TEST;
  114. port->dev = &ofdev->dev;
  115. if (type == PORT_TEGRA)
  116. port->handle_break = tegra_serial_handle_break;
  117. return 0;
  118. out:
  119. if (info->clk)
  120. clk_disable_unprepare(info->clk);
  121. return ret;
  122. }
  123. /*
  124. * Try to register a serial port
  125. */
  126. static struct of_device_id of_platform_serial_table[];
  127. static int of_platform_serial_probe(struct platform_device *ofdev)
  128. {
  129. const struct of_device_id *match;
  130. struct of_serial_info *info;
  131. struct uart_port port;
  132. int port_type;
  133. int ret;
  134. match = of_match_device(of_platform_serial_table, &ofdev->dev);
  135. if (!match)
  136. return -EINVAL;
  137. if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
  138. return -EBUSY;
  139. info = kmalloc(sizeof(*info), GFP_KERNEL);
  140. if (info == NULL)
  141. return -ENOMEM;
  142. port_type = (unsigned long)match->data;
  143. ret = of_platform_serial_setup(ofdev, port_type, &port, info);
  144. if (ret)
  145. goto out;
  146. switch (port_type) {
  147. #ifdef CONFIG_SERIAL_8250
  148. case PORT_8250 ... PORT_MAX_8250:
  149. {
  150. struct uart_8250_port port8250;
  151. memset(&port8250, 0, sizeof(port8250));
  152. port8250.port = port;
  153. if (port.fifosize)
  154. port8250.capabilities = UART_CAP_FIFO;
  155. if (of_property_read_bool(ofdev->dev.of_node,
  156. "auto-flow-control"))
  157. port8250.capabilities |= UART_CAP_AFE;
  158. ret = serial8250_register_8250_port(&port8250);
  159. break;
  160. }
  161. #endif
  162. #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
  163. case PORT_NWPSERIAL:
  164. ret = nwpserial_register_port(&port);
  165. break;
  166. #endif
  167. default:
  168. /* need to add code for these */
  169. case PORT_UNKNOWN:
  170. dev_info(&ofdev->dev, "Unknown serial port found, ignored\n");
  171. ret = -ENODEV;
  172. break;
  173. }
  174. if (ret < 0)
  175. goto out;
  176. info->type = port_type;
  177. info->line = ret;
  178. platform_set_drvdata(ofdev, info);
  179. return 0;
  180. out:
  181. kfree(info);
  182. irq_dispose_mapping(port.irq);
  183. return ret;
  184. }
  185. /*
  186. * Release a line
  187. */
  188. static int of_platform_serial_remove(struct platform_device *ofdev)
  189. {
  190. struct of_serial_info *info = platform_get_drvdata(ofdev);
  191. switch (info->type) {
  192. #ifdef CONFIG_SERIAL_8250
  193. case PORT_8250 ... PORT_MAX_8250:
  194. serial8250_unregister_port(info->line);
  195. break;
  196. #endif
  197. #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
  198. case PORT_NWPSERIAL:
  199. nwpserial_unregister_port(info->line);
  200. break;
  201. #endif
  202. default:
  203. /* need to add code for these */
  204. break;
  205. }
  206. if (info->clk)
  207. clk_disable_unprepare(info->clk);
  208. kfree(info);
  209. return 0;
  210. }
  211. /*
  212. * A few common types, add more as needed.
  213. */
  214. static struct of_device_id of_platform_serial_table[] = {
  215. { .compatible = "ns8250", .data = (void *)PORT_8250, },
  216. { .compatible = "ns16450", .data = (void *)PORT_16450, },
  217. { .compatible = "ns16550a", .data = (void *)PORT_16550A, },
  218. { .compatible = "ns16550", .data = (void *)PORT_16550, },
  219. { .compatible = "ns16750", .data = (void *)PORT_16750, },
  220. { .compatible = "ns16850", .data = (void *)PORT_16850, },
  221. { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
  222. { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
  223. { .compatible = "altr,16550-FIFO32",
  224. .data = (void *)PORT_ALTR_16550_F32, },
  225. { .compatible = "altr,16550-FIFO64",
  226. .data = (void *)PORT_ALTR_16550_F64, },
  227. { .compatible = "altr,16550-FIFO128",
  228. .data = (void *)PORT_ALTR_16550_F128, },
  229. #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
  230. { .compatible = "ibm,qpace-nwp-serial",
  231. .data = (void *)PORT_NWPSERIAL, },
  232. #endif
  233. { .type = "serial", .data = (void *)PORT_UNKNOWN, },
  234. { /* end of list */ },
  235. };
  236. static struct platform_driver of_platform_serial_driver = {
  237. .driver = {
  238. .name = "of_serial",
  239. .owner = THIS_MODULE,
  240. .of_match_table = of_platform_serial_table,
  241. },
  242. .probe = of_platform_serial_probe,
  243. .remove = of_platform_serial_remove,
  244. };
  245. module_platform_driver(of_platform_serial_driver);
  246. MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
  247. MODULE_LICENSE("GPL");
  248. MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices");