Makefile 40 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298
  1. ifeq ("$(origin O)", "command line")
  2. OUTPUT := $(O)/
  3. endif
  4. # The default target of this Makefile is...
  5. all::
  6. ifneq ($(OUTPUT),)
  7. # check that the output directory actually exists
  8. OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
  9. $(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
  10. endif
  11. # Define V=1 to have a more verbose compile.
  12. # Define V=2 to have an even more verbose compile.
  13. #
  14. # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
  15. # or vsnprintf() return -1 instead of number of characters which would
  16. # have been written to the final string if enough space had been available.
  17. #
  18. # Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
  19. # when attempting to read from an fopen'ed directory.
  20. #
  21. # Define NO_OPENSSL environment variable if you do not have OpenSSL.
  22. # This also implies MOZILLA_SHA1.
  23. #
  24. # Define CURLDIR=/foo/bar if your curl header and library files are in
  25. # /foo/bar/include and /foo/bar/lib directories.
  26. #
  27. # Define EXPATDIR=/foo/bar if your expat header and library files are in
  28. # /foo/bar/include and /foo/bar/lib directories.
  29. #
  30. # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
  31. #
  32. # Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
  33. # d_type in struct dirent (latest Cygwin -- will be fixed soonish).
  34. #
  35. # Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.)
  36. # do not support the 'size specifiers' introduced by C99, namely ll, hh,
  37. # j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t).
  38. # some C compilers supported these specifiers prior to C99 as an extension.
  39. #
  40. # Define NO_STRCASESTR if you don't have strcasestr.
  41. #
  42. # Define NO_MEMMEM if you don't have memmem.
  43. #
  44. # Define NO_STRTOUMAX if you don't have strtoumax in the C library.
  45. # If your compiler also does not support long long or does not have
  46. # strtoull, define NO_STRTOULL.
  47. #
  48. # Define NO_SETENV if you don't have setenv in the C library.
  49. #
  50. # Define NO_UNSETENV if you don't have unsetenv in the C library.
  51. #
  52. # Define NO_MKDTEMP if you don't have mkdtemp in the C library.
  53. #
  54. # Define NO_SYS_SELECT_H if you don't have sys/select.h.
  55. #
  56. # Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link.
  57. # Enable it on Windows. By default, symrefs are still used.
  58. #
  59. # Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
  60. # tests. These tests take up a significant amount of the total test time
  61. # but are not needed unless you plan to talk to SVN repos.
  62. #
  63. # Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
  64. # installed in /sw, but don't want PERF to link against any libraries
  65. # installed there. If defined you may specify your own (or Fink's)
  66. # include directories and library directories by defining CFLAGS
  67. # and LDFLAGS appropriately.
  68. #
  69. # Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
  70. # have DarwinPorts installed in /opt/local, but don't want PERF to
  71. # link against any libraries installed there. If defined you may
  72. # specify your own (or DarwinPort's) include directories and
  73. # library directories by defining CFLAGS and LDFLAGS appropriately.
  74. #
  75. # Define PPC_SHA1 environment variable when running make to make use of
  76. # a bundled SHA1 routine optimized for PowerPC.
  77. #
  78. # Define ARM_SHA1 environment variable when running make to make use of
  79. # a bundled SHA1 routine optimized for ARM.
  80. #
  81. # Define MOZILLA_SHA1 environment variable when running make to make use of
  82. # a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
  83. # on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
  84. # choice) has very fast version optimized for i586.
  85. #
  86. # Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
  87. #
  88. # Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
  89. #
  90. # Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
  91. # Patrick Mauritz).
  92. #
  93. # Define NO_MMAP if you want to avoid mmap.
  94. #
  95. # Define NO_PTHREADS if you do not have or do not want to use Pthreads.
  96. #
  97. # Define NO_PREAD if you have a problem with pread() system call (e.g.
  98. # cygwin.dll before v1.5.22).
  99. #
  100. # Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
  101. # generally faster on your platform than accessing the working directory.
  102. #
  103. # Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
  104. # the executable mode bit, but doesn't really do so.
  105. #
  106. # Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
  107. #
  108. # Define NO_SOCKADDR_STORAGE if your platform does not have struct
  109. # sockaddr_storage.
  110. #
  111. # Define NO_ICONV if your libc does not properly support iconv.
  112. #
  113. # Define OLD_ICONV if your library has an old iconv(), where the second
  114. # (input buffer pointer) parameter is declared with type (const char **).
  115. #
  116. # Define NO_DEFLATE_BOUND if your zlib does not have deflateBound.
  117. #
  118. # Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib"
  119. # that tells runtime paths to dynamic libraries;
  120. # "-Wl,-rpath=/path/lib" is used instead.
  121. #
  122. # Define USE_NSEC below if you want perf to care about sub-second file mtimes
  123. # and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
  124. # it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
  125. # randomly break unless your underlying filesystem supports those sub-second
  126. # times (my ext3 doesn't).
  127. #
  128. # Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of
  129. # "st_ctim"
  130. #
  131. # Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec"
  132. # available. This automatically turns USE_NSEC off.
  133. #
  134. # Define USE_STDEV below if you want perf to care about the underlying device
  135. # change being considered an inode change from the update-index perspective.
  136. #
  137. # Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
  138. # field that counts the on-disk footprint in 512-byte blocks.
  139. #
  140. # Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
  141. #
  142. # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
  143. #
  144. # Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
  145. # MakeMaker (e.g. using ActiveState under Cygwin).
  146. #
  147. # Define NO_PERL if you do not want Perl scripts or libraries at all.
  148. #
  149. # Define INTERNAL_QSORT to use Git's implementation of qsort(), which
  150. # is a simplified version of the merge sort used in glibc. This is
  151. # recommended if Git triggers O(n^2) behavior in your platform's qsort().
  152. #
  153. # Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call
  154. # your external grep (e.g., if your system lacks grep, if its grep is
  155. # broken, or spawning external process is slower than built-in grep perf has).
  156. #
  157. # Define LDFLAGS=-static to build a static binary.
  158. #
  159. # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
  160. #
  161. # Define NO_DWARF if you do not want debug-info analysis feature at all.
  162. $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
  163. @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
  164. -include $(OUTPUT)PERF-VERSION-FILE
  165. uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
  166. uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
  167. uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
  168. uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
  169. uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
  170. uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
  171. ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
  172. -e s/arm.*/arm/ -e s/sa110/arm/ \
  173. -e s/s390x/s390/ -e s/parisc64/parisc/ \
  174. -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
  175. -e s/sh[234].*/sh/ )
  176. # Additional ARCH settings for x86
  177. ifeq ($(ARCH),i386)
  178. ARCH := x86
  179. endif
  180. ifeq ($(ARCH),x86_64)
  181. RAW_ARCH := x86_64
  182. ARCH := x86
  183. ARCH_CFLAGS := -DARCH_X86_64
  184. ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
  185. endif
  186. # CFLAGS and LDFLAGS are for the users to override from the command line.
  187. #
  188. # Include saner warnings here, which can catch bugs:
  189. #
  190. EXTRA_WARNINGS := -Wformat
  191. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security
  192. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k
  193. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow
  194. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Winit-self
  195. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wpacked
  196. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wredundant-decls
  197. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstack-protector
  198. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-aliasing=3
  199. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-default
  200. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-enum
  201. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wno-system-headers
  202. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wundef
  203. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wvolatile-register-var
  204. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wwrite-strings
  205. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wbad-function-cast
  206. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-declarations
  207. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-prototypes
  208. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wnested-externs
  209. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wold-style-definition
  210. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
  211. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
  212. ifeq ("$(origin DEBUG)", "command line")
  213. PERF_DEBUG = $(DEBUG)
  214. endif
  215. ifndef PERF_DEBUG
  216. CFLAGS_OPTIMIZE = -O6
  217. endif
  218. CFLAGS = -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
  219. EXTLIBS = -lpthread -lrt -lelf -lm
  220. ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
  221. ALL_LDFLAGS = $(LDFLAGS)
  222. STRIP ?= strip
  223. # Among the variables below, these:
  224. # perfexecdir
  225. # template_dir
  226. # mandir
  227. # infodir
  228. # htmldir
  229. # ETC_PERFCONFIG (but not sysconfdir)
  230. # can be specified as a relative path some/where/else;
  231. # this is interpreted as relative to $(prefix) and "perf" at
  232. # runtime figures out where they are based on the path to the executable.
  233. # This can help installing the suite in a relocatable way.
  234. # Make the path relative to DESTDIR, not to prefix
  235. ifndef DESTDIR
  236. prefix = $(HOME)
  237. endif
  238. bindir_relative = bin
  239. bindir = $(prefix)/$(bindir_relative)
  240. mandir = share/man
  241. infodir = share/info
  242. perfexecdir = libexec/perf-core
  243. sharedir = $(prefix)/share
  244. template_dir = share/perf-core/templates
  245. htmldir = share/doc/perf-doc
  246. ifeq ($(prefix),/usr)
  247. sysconfdir = /etc
  248. ETC_PERFCONFIG = $(sysconfdir)/perfconfig
  249. else
  250. sysconfdir = $(prefix)/etc
  251. ETC_PERFCONFIG = etc/perfconfig
  252. endif
  253. lib = lib
  254. export prefix bindir sharedir sysconfdir
  255. CC = $(CROSS_COMPILE)gcc
  256. AR = $(CROSS_COMPILE)ar
  257. RM = rm -f
  258. MKDIR = mkdir
  259. TAR = tar
  260. FIND = find
  261. INSTALL = install
  262. RPMBUILD = rpmbuild
  263. PTHREAD_LIBS = -lpthread
  264. # sparse is architecture-neutral, which means that we need to tell it
  265. # explicitly what architecture to check for. Fix this up for yours..
  266. SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
  267. ifeq ($(V), 2)
  268. QUIET_STDERR = ">/dev/null"
  269. else
  270. QUIET_STDERR = ">/dev/null 2>&1"
  271. endif
  272. -include feature-tests.mak
  273. ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
  274. CFLAGS := $(CFLAGS) -fstack-protector-all
  275. endif
  276. ### --- END CONFIGURATION SECTION ---
  277. # Those must not be GNU-specific; they are shared with perl/ which may
  278. # be built by a different compiler. (Note that this is an artifact now
  279. # but it still might be nice to keep that distinction.)
  280. BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
  281. BASIC_LDFLAGS =
  282. # Guard against environment variables
  283. BUILTIN_OBJS =
  284. BUILT_INS =
  285. COMPAT_CFLAGS =
  286. COMPAT_OBJS =
  287. LIB_H =
  288. LIB_OBJS =
  289. SCRIPT_PERL =
  290. SCRIPT_SH =
  291. TEST_PROGRAMS =
  292. SCRIPT_SH += perf-archive.sh
  293. grep-libs = $(filter -l%,$(1))
  294. strip-libs = $(filter-out -l%,$(1))
  295. #
  296. # No Perl scripts right now:
  297. #
  298. # SCRIPT_PERL += perf-add--interactive.perl
  299. SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
  300. $(patsubst %.perl,%,$(SCRIPT_PERL))
  301. # Empty...
  302. EXTRA_PROGRAMS =
  303. # ... and all the rest that could be moved out of bindir to perfexecdir
  304. PROGRAMS += $(EXTRA_PROGRAMS)
  305. #
  306. # Single 'perf' binary right now:
  307. #
  308. PROGRAMS += $(OUTPUT)perf
  309. # List built-in command $C whose implementation cmd_$C() is not in
  310. # builtin-$C.o but is linked in as part of some other command.
  311. #
  312. # what 'all' will build and 'install' will install, in perfexecdir
  313. ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
  314. # what 'all' will build but not install in perfexecdir
  315. OTHER_PROGRAMS = $(OUTPUT)perf$X
  316. # Set paths to tools early so that they can be used for version tests.
  317. ifndef SHELL_PATH
  318. SHELL_PATH = /bin/sh
  319. endif
  320. ifndef PERL_PATH
  321. PERL_PATH = /usr/bin/perl
  322. endif
  323. export PERL_PATH
  324. LIB_FILE=$(OUTPUT)libperf.a
  325. LIB_H += ../../include/linux/perf_event.h
  326. LIB_H += ../../include/linux/rbtree.h
  327. LIB_H += ../../include/linux/list.h
  328. LIB_H += ../../include/linux/hash.h
  329. LIB_H += ../../include/linux/stringify.h
  330. LIB_H += util/include/linux/bitmap.h
  331. LIB_H += util/include/linux/bitops.h
  332. LIB_H += util/include/linux/compiler.h
  333. LIB_H += util/include/linux/ctype.h
  334. LIB_H += util/include/linux/kernel.h
  335. LIB_H += util/include/linux/list.h
  336. LIB_H += util/include/linux/module.h
  337. LIB_H += util/include/linux/poison.h
  338. LIB_H += util/include/linux/prefetch.h
  339. LIB_H += util/include/linux/rbtree.h
  340. LIB_H += util/include/linux/string.h
  341. LIB_H += util/include/linux/types.h
  342. LIB_H += util/include/linux/linkage.h
  343. LIB_H += util/include/asm/asm-offsets.h
  344. LIB_H += util/include/asm/bug.h
  345. LIB_H += util/include/asm/byteorder.h
  346. LIB_H += util/include/asm/hweight.h
  347. LIB_H += util/include/asm/swab.h
  348. LIB_H += util/include/asm/system.h
  349. LIB_H += util/include/asm/uaccess.h
  350. LIB_H += util/include/dwarf-regs.h
  351. LIB_H += util/include/asm/dwarf2.h
  352. LIB_H += util/include/asm/cpufeature.h
  353. LIB_H += perf.h
  354. LIB_H += util/cache.h
  355. LIB_H += util/callchain.h
  356. LIB_H += util/build-id.h
  357. LIB_H += util/debug.h
  358. LIB_H += util/debugfs.h
  359. LIB_H += util/event.h
  360. LIB_H += util/exec_cmd.h
  361. LIB_H += util/types.h
  362. LIB_H += util/levenshtein.h
  363. LIB_H += util/map.h
  364. LIB_H += util/parse-options.h
  365. LIB_H += util/parse-events.h
  366. LIB_H += util/quote.h
  367. LIB_H += util/util.h
  368. LIB_H += util/header.h
  369. LIB_H += util/help.h
  370. LIB_H += util/session.h
  371. LIB_H += util/strbuf.h
  372. LIB_H += util/strlist.h
  373. LIB_H += util/svghelper.h
  374. LIB_H += util/run-command.h
  375. LIB_H += util/sigchain.h
  376. LIB_H += util/symbol.h
  377. LIB_H += util/color.h
  378. LIB_H += util/values.h
  379. LIB_H += util/sort.h
  380. LIB_H += util/hist.h
  381. LIB_H += util/thread.h
  382. LIB_H += util/trace-event.h
  383. LIB_H += util/probe-finder.h
  384. LIB_H += util/probe-event.h
  385. LIB_H += util/pstack.h
  386. LIB_H += util/cpumap.h
  387. LIB_H += $(ARCH_INCLUDE)
  388. LIB_OBJS += $(OUTPUT)util/abspath.o
  389. LIB_OBJS += $(OUTPUT)util/alias.o
  390. LIB_OBJS += $(OUTPUT)util/build-id.o
  391. LIB_OBJS += $(OUTPUT)util/config.o
  392. LIB_OBJS += $(OUTPUT)util/ctype.o
  393. LIB_OBJS += $(OUTPUT)util/debugfs.o
  394. LIB_OBJS += $(OUTPUT)util/environment.o
  395. LIB_OBJS += $(OUTPUT)util/event.o
  396. LIB_OBJS += $(OUTPUT)util/exec_cmd.o
  397. LIB_OBJS += $(OUTPUT)util/help.o
  398. LIB_OBJS += $(OUTPUT)util/levenshtein.o
  399. LIB_OBJS += $(OUTPUT)util/parse-options.o
  400. LIB_OBJS += $(OUTPUT)util/parse-events.o
  401. LIB_OBJS += $(OUTPUT)util/path.o
  402. LIB_OBJS += $(OUTPUT)util/rbtree.o
  403. LIB_OBJS += $(OUTPUT)util/bitmap.o
  404. LIB_OBJS += $(OUTPUT)util/hweight.o
  405. LIB_OBJS += $(OUTPUT)util/run-command.o
  406. LIB_OBJS += $(OUTPUT)util/quote.o
  407. LIB_OBJS += $(OUTPUT)util/strbuf.o
  408. LIB_OBJS += $(OUTPUT)util/string.o
  409. LIB_OBJS += $(OUTPUT)util/strlist.o
  410. LIB_OBJS += $(OUTPUT)util/usage.o
  411. LIB_OBJS += $(OUTPUT)util/wrapper.o
  412. LIB_OBJS += $(OUTPUT)util/sigchain.o
  413. LIB_OBJS += $(OUTPUT)util/symbol.o
  414. LIB_OBJS += $(OUTPUT)util/color.o
  415. LIB_OBJS += $(OUTPUT)util/pager.o
  416. LIB_OBJS += $(OUTPUT)util/header.o
  417. LIB_OBJS += $(OUTPUT)util/callchain.o
  418. LIB_OBJS += $(OUTPUT)util/values.o
  419. LIB_OBJS += $(OUTPUT)util/debug.o
  420. LIB_OBJS += $(OUTPUT)util/map.o
  421. LIB_OBJS += $(OUTPUT)util/pstack.o
  422. LIB_OBJS += $(OUTPUT)util/session.o
  423. LIB_OBJS += $(OUTPUT)util/thread.o
  424. LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
  425. LIB_OBJS += $(OUTPUT)util/trace-event-read.o
  426. LIB_OBJS += $(OUTPUT)util/trace-event-info.o
  427. LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
  428. LIB_OBJS += $(OUTPUT)util/svghelper.o
  429. LIB_OBJS += $(OUTPUT)util/sort.o
  430. LIB_OBJS += $(OUTPUT)util/hist.o
  431. LIB_OBJS += $(OUTPUT)util/probe-event.o
  432. LIB_OBJS += $(OUTPUT)util/util.o
  433. LIB_OBJS += $(OUTPUT)util/cpumap.o
  434. BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
  435. BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
  436. # Benchmark modules
  437. BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
  438. BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
  439. ifeq ($(RAW_ARCH),x86_64)
  440. BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
  441. endif
  442. BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
  443. BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
  444. BUILTIN_OBJS += $(OUTPUT)builtin-help.o
  445. BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
  446. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
  447. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
  448. BUILTIN_OBJS += $(OUTPUT)builtin-list.o
  449. BUILTIN_OBJS += $(OUTPUT)builtin-record.o
  450. BUILTIN_OBJS += $(OUTPUT)builtin-report.o
  451. BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
  452. BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
  453. BUILTIN_OBJS += $(OUTPUT)builtin-top.o
  454. BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
  455. BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
  456. BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
  457. BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
  458. BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
  459. BUILTIN_OBJS += $(OUTPUT)builtin-test.o
  460. BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
  461. PERFLIBS = $(LIB_FILE)
  462. #
  463. # Platform specific tweaks
  464. #
  465. # We choose to avoid "if .. else if .. else .. endif endif"
  466. # because maintaining the nesting to match is a pain. If
  467. # we had "elif" things would have been much nicer...
  468. -include config.mak.autogen
  469. -include config.mak
  470. ifndef NO_DWARF
  471. FLAGS_DWARF=$(ALL_CFLAGS) -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
  472. ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
  473. msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
  474. NO_DWARF := 1
  475. endif # Dwarf support
  476. endif # NO_DWARF
  477. -include arch/$(ARCH)/Makefile
  478. ifeq ($(uname_S),Darwin)
  479. ifndef NO_FINK
  480. ifeq ($(shell test -d /sw/lib && echo y),y)
  481. BASIC_CFLAGS += -I/sw/include
  482. BASIC_LDFLAGS += -L/sw/lib
  483. endif
  484. endif
  485. ifndef NO_DARWIN_PORTS
  486. ifeq ($(shell test -d /opt/local/lib && echo y),y)
  487. BASIC_CFLAGS += -I/opt/local/include
  488. BASIC_LDFLAGS += -L/opt/local/lib
  489. endif
  490. endif
  491. PTHREAD_LIBS =
  492. endif
  493. ifneq ($(OUTPUT),)
  494. BASIC_CFLAGS += -I$(OUTPUT)
  495. endif
  496. FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
  497. ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF)),y)
  498. FLAGS_GLIBC=$(ALL_CFLAGS) $(ALL_LDFLAGS)
  499. ifneq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC)),y)
  500. msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
  501. else
  502. msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
  503. endif
  504. endif
  505. ifneq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
  506. BASIC_CFLAGS += -DLIBELF_NO_MMAP
  507. endif
  508. ifndef NO_DWARF
  509. ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
  510. msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
  511. else
  512. BASIC_CFLAGS += -DDWARF_SUPPORT
  513. EXTLIBS += -lelf -ldw
  514. LIB_OBJS += $(OUTPUT)util/probe-finder.o
  515. endif # PERF_HAVE_DWARF_REGS
  516. endif # NO_DWARF
  517. ifdef NO_NEWT
  518. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  519. else
  520. FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
  521. ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT)),y)
  522. msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
  523. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  524. else
  525. # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
  526. BASIC_CFLAGS += -I/usr/include/slang
  527. EXTLIBS += -lnewt -lslang
  528. LIB_OBJS += $(OUTPUT)util/ui/setup.o
  529. LIB_OBJS += $(OUTPUT)util/ui/browser.o
  530. LIB_OBJS += $(OUTPUT)util/ui/browsers/annotate.o
  531. LIB_OBJS += $(OUTPUT)util/ui/browsers/hists.o
  532. LIB_OBJS += $(OUTPUT)util/ui/browsers/map.o
  533. LIB_OBJS += $(OUTPUT)util/ui/helpline.o
  534. LIB_OBJS += $(OUTPUT)util/ui/progress.o
  535. LIB_OBJS += $(OUTPUT)util/ui/util.o
  536. LIB_H += util/ui/browser.h
  537. LIB_H += util/ui/browsers/map.h
  538. LIB_H += util/ui/helpline.h
  539. LIB_H += util/ui/libslang.h
  540. LIB_H += util/ui/progress.h
  541. LIB_H += util/ui/util.h
  542. endif
  543. endif
  544. ifdef NO_LIBPERL
  545. BASIC_CFLAGS += -DNO_LIBPERL
  546. else
  547. PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
  548. PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
  549. PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
  550. PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
  551. FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
  552. ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED)),y)
  553. BASIC_CFLAGS += -DNO_LIBPERL
  554. else
  555. ALL_LDFLAGS += $(PERL_EMBED_LDFLAGS)
  556. EXTLIBS += $(PERL_EMBED_LIBADD)
  557. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
  558. LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
  559. endif
  560. endif
  561. ifdef NO_LIBPYTHON
  562. BASIC_CFLAGS += -DNO_LIBPYTHON
  563. else
  564. PYTHON_EMBED_LDOPTS = $(shell python-config --ldflags 2>/dev/null)
  565. PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
  566. PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
  567. PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
  568. FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
  569. ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
  570. BASIC_CFLAGS += -DNO_LIBPYTHON
  571. else
  572. ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
  573. EXTLIBS += $(PYTHON_EMBED_LIBADD)
  574. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
  575. LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
  576. endif
  577. endif
  578. ifdef NO_DEMANGLE
  579. BASIC_CFLAGS += -DNO_DEMANGLE
  580. else
  581. ifdef HAVE_CPLUS_DEMANGLE
  582. EXTLIBS += -liberty
  583. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  584. else
  585. FLAGS_BFD=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd
  586. has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD))
  587. ifeq ($(has_bfd),y)
  588. EXTLIBS += -lbfd
  589. else
  590. FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
  591. has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY))
  592. ifeq ($(has_bfd_iberty),y)
  593. EXTLIBS += -lbfd -liberty
  594. else
  595. FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
  596. has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z))
  597. ifeq ($(has_bfd_iberty_z),y)
  598. EXTLIBS += -lbfd -liberty -lz
  599. else
  600. FLAGS_CPLUS_DEMANGLE=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -liberty
  601. has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE))
  602. ifeq ($(has_cplus_demangle),y)
  603. EXTLIBS += -liberty
  604. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  605. else
  606. msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
  607. BASIC_CFLAGS += -DNO_DEMANGLE
  608. endif
  609. endif
  610. endif
  611. endif
  612. endif
  613. endif
  614. ifdef NO_STRLCPY
  615. BASIC_CFLAGS += -DNO_STRLCPY
  616. else
  617. ifneq ($(call try-cc,$(SOURCE_STRLCPY),),y)
  618. BASIC_CFLAGS += -DNO_STRLCPY
  619. endif
  620. endif
  621. ifndef CC_LD_DYNPATH
  622. ifdef NO_R_TO_GCC_LINKER
  623. # Some gcc does not accept and pass -R to the linker to specify
  624. # the runtime dynamic library path.
  625. CC_LD_DYNPATH = -Wl,-rpath,
  626. else
  627. CC_LD_DYNPATH = -R
  628. endif
  629. endif
  630. ifdef NEEDS_SOCKET
  631. EXTLIBS += -lsocket
  632. endif
  633. ifdef NEEDS_NSL
  634. EXTLIBS += -lnsl
  635. endif
  636. ifdef NO_D_TYPE_IN_DIRENT
  637. BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
  638. endif
  639. ifdef NO_D_INO_IN_DIRENT
  640. BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
  641. endif
  642. ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
  643. BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT
  644. endif
  645. ifdef USE_NSEC
  646. BASIC_CFLAGS += -DUSE_NSEC
  647. endif
  648. ifdef USE_ST_TIMESPEC
  649. BASIC_CFLAGS += -DUSE_ST_TIMESPEC
  650. endif
  651. ifdef NO_NSEC
  652. BASIC_CFLAGS += -DNO_NSEC
  653. endif
  654. ifdef NO_C99_FORMAT
  655. BASIC_CFLAGS += -DNO_C99_FORMAT
  656. endif
  657. ifdef SNPRINTF_RETURNS_BOGUS
  658. COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS
  659. COMPAT_OBJS += $(OUTPUT)compat/snprintf.o
  660. endif
  661. ifdef FREAD_READS_DIRECTORIES
  662. COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES
  663. COMPAT_OBJS += $(OUTPUT)compat/fopen.o
  664. endif
  665. ifdef NO_SYMLINK_HEAD
  666. BASIC_CFLAGS += -DNO_SYMLINK_HEAD
  667. endif
  668. ifdef NO_STRCASESTR
  669. COMPAT_CFLAGS += -DNO_STRCASESTR
  670. COMPAT_OBJS += $(OUTPUT)compat/strcasestr.o
  671. endif
  672. ifdef NO_STRTOUMAX
  673. COMPAT_CFLAGS += -DNO_STRTOUMAX
  674. COMPAT_OBJS += $(OUTPUT)compat/strtoumax.o
  675. endif
  676. ifdef NO_STRTOULL
  677. COMPAT_CFLAGS += -DNO_STRTOULL
  678. endif
  679. ifdef NO_SETENV
  680. COMPAT_CFLAGS += -DNO_SETENV
  681. COMPAT_OBJS += $(OUTPUT)compat/setenv.o
  682. endif
  683. ifdef NO_MKDTEMP
  684. COMPAT_CFLAGS += -DNO_MKDTEMP
  685. COMPAT_OBJS += $(OUTPUT)compat/mkdtemp.o
  686. endif
  687. ifdef NO_UNSETENV
  688. COMPAT_CFLAGS += -DNO_UNSETENV
  689. COMPAT_OBJS += $(OUTPUT)compat/unsetenv.o
  690. endif
  691. ifdef NO_SYS_SELECT_H
  692. BASIC_CFLAGS += -DNO_SYS_SELECT_H
  693. endif
  694. ifdef NO_MMAP
  695. COMPAT_CFLAGS += -DNO_MMAP
  696. COMPAT_OBJS += $(OUTPUT)compat/mmap.o
  697. else
  698. ifdef USE_WIN32_MMAP
  699. COMPAT_CFLAGS += -DUSE_WIN32_MMAP
  700. COMPAT_OBJS += $(OUTPUT)compat/win32mmap.o
  701. endif
  702. endif
  703. ifdef NO_PREAD
  704. COMPAT_CFLAGS += -DNO_PREAD
  705. COMPAT_OBJS += $(OUTPUT)compat/pread.o
  706. endif
  707. ifdef NO_FAST_WORKING_DIRECTORY
  708. BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
  709. endif
  710. ifdef NO_TRUSTABLE_FILEMODE
  711. BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
  712. endif
  713. ifdef NO_IPV6
  714. BASIC_CFLAGS += -DNO_IPV6
  715. endif
  716. ifdef NO_UINTMAX_T
  717. BASIC_CFLAGS += -Duintmax_t=uint32_t
  718. endif
  719. ifdef NO_SOCKADDR_STORAGE
  720. ifdef NO_IPV6
  721. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
  722. else
  723. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
  724. endif
  725. endif
  726. ifdef NO_INET_NTOP
  727. LIB_OBJS += $(OUTPUT)compat/inet_ntop.o
  728. endif
  729. ifdef NO_INET_PTON
  730. LIB_OBJS += $(OUTPUT)compat/inet_pton.o
  731. endif
  732. ifdef NO_ICONV
  733. BASIC_CFLAGS += -DNO_ICONV
  734. endif
  735. ifdef OLD_ICONV
  736. BASIC_CFLAGS += -DOLD_ICONV
  737. endif
  738. ifdef NO_DEFLATE_BOUND
  739. BASIC_CFLAGS += -DNO_DEFLATE_BOUND
  740. endif
  741. ifdef PPC_SHA1
  742. SHA1_HEADER = "ppc/sha1.h"
  743. LIB_OBJS += $(OUTPUT)ppc/sha1.o ppc/sha1ppc.o
  744. else
  745. ifdef ARM_SHA1
  746. SHA1_HEADER = "arm/sha1.h"
  747. LIB_OBJS += $(OUTPUT)arm/sha1.o $(OUTPUT)arm/sha1_arm.o
  748. else
  749. ifdef MOZILLA_SHA1
  750. SHA1_HEADER = "mozilla-sha1/sha1.h"
  751. LIB_OBJS += $(OUTPUT)mozilla-sha1/sha1.o
  752. else
  753. SHA1_HEADER = <openssl/sha.h>
  754. EXTLIBS += $(LIB_4_CRYPTO)
  755. endif
  756. endif
  757. endif
  758. ifdef NO_PERL_MAKEMAKER
  759. export NO_PERL_MAKEMAKER
  760. endif
  761. ifdef NO_HSTRERROR
  762. COMPAT_CFLAGS += -DNO_HSTRERROR
  763. COMPAT_OBJS += $(OUTPUT)compat/hstrerror.o
  764. endif
  765. ifdef NO_MEMMEM
  766. COMPAT_CFLAGS += -DNO_MEMMEM
  767. COMPAT_OBJS += $(OUTPUT)compat/memmem.o
  768. endif
  769. ifdef INTERNAL_QSORT
  770. COMPAT_CFLAGS += -DINTERNAL_QSORT
  771. COMPAT_OBJS += $(OUTPUT)compat/qsort.o
  772. endif
  773. ifdef RUNTIME_PREFIX
  774. COMPAT_CFLAGS += -DRUNTIME_PREFIX
  775. endif
  776. ifdef DIR_HAS_BSD_GROUP_SEMANTICS
  777. COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
  778. endif
  779. ifdef NO_EXTERNAL_GREP
  780. BASIC_CFLAGS += -DNO_EXTERNAL_GREP
  781. endif
  782. ifeq ($(PERL_PATH),)
  783. NO_PERL=NoThanks
  784. endif
  785. QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
  786. QUIET_SUBDIR1 =
  787. ifneq ($(findstring $(MAKEFLAGS),w),w)
  788. PRINT_DIR = --no-print-directory
  789. else # "make -w"
  790. NO_SUBDIR = :
  791. endif
  792. ifneq ($(findstring $(MAKEFLAGS),s),s)
  793. ifndef V
  794. QUIET_CC = @echo ' ' CC $@;
  795. QUIET_AR = @echo ' ' AR $@;
  796. QUIET_LINK = @echo ' ' LINK $@;
  797. QUIET_MKDIR = @echo ' ' MKDIR $@;
  798. QUIET_BUILT_IN = @echo ' ' BUILTIN $@;
  799. QUIET_GEN = @echo ' ' GEN $@;
  800. QUIET_SUBDIR0 = +@subdir=
  801. QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \
  802. $(MAKE) $(PRINT_DIR) -C $$subdir
  803. export V
  804. export QUIET_GEN
  805. export QUIET_BUILT_IN
  806. endif
  807. endif
  808. ifdef ASCIIDOC8
  809. export ASCIIDOC8
  810. endif
  811. # Shell quote (do not use $(call) to accommodate ancient setups);
  812. SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
  813. ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
  814. DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
  815. bindir_SQ = $(subst ','\'',$(bindir))
  816. bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
  817. mandir_SQ = $(subst ','\'',$(mandir))
  818. infodir_SQ = $(subst ','\'',$(infodir))
  819. perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
  820. template_dir_SQ = $(subst ','\'',$(template_dir))
  821. htmldir_SQ = $(subst ','\'',$(htmldir))
  822. prefix_SQ = $(subst ','\'',$(prefix))
  823. SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
  824. PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
  825. LIBS = $(PERFLIBS) $(EXTLIBS)
  826. BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
  827. $(COMPAT_CFLAGS)
  828. LIB_OBJS += $(COMPAT_OBJS)
  829. ALL_CFLAGS += $(BASIC_CFLAGS)
  830. ALL_CFLAGS += $(ARCH_CFLAGS)
  831. ALL_LDFLAGS += $(BASIC_LDFLAGS)
  832. export TAR INSTALL DESTDIR SHELL_PATH
  833. ### Build rules
  834. SHELL = $(SHELL_PATH)
  835. all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) $(OUTPUT)PERF-BUILD-OPTIONS
  836. ifneq (,$X)
  837. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
  838. endif
  839. all::
  840. please_set_SHELL_PATH_to_a_more_modern_shell:
  841. @$$(:)
  842. shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
  843. strip: $(PROGRAMS) $(OUTPUT)perf$X
  844. $(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf$X
  845. $(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  846. $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \
  847. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  848. $(ALL_CFLAGS) -c $(filter %.c,$^) -o $@
  849. $(OUTPUT)perf$X: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
  850. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) $(ALL_LDFLAGS) $(OUTPUT)perf.o \
  851. $(BUILTIN_OBJS) $(LIBS) -o $@
  852. $(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  853. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  854. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  855. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  856. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  857. $(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  858. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  859. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  860. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  861. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  862. $(BUILT_INS): $(OUTPUT)perf$X
  863. $(QUIET_BUILT_IN)$(RM) $@ && \
  864. ln perf$X $@ 2>/dev/null || \
  865. ln -s perf$X $@ 2>/dev/null || \
  866. cp perf$X $@
  867. $(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
  868. $(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
  869. $(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
  870. $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
  871. $(QUIET_GEN)$(RM) $(OUTPUT)$@ $(OUTPUT)$@+ && \
  872. sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
  873. -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
  874. -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
  875. -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  876. -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
  877. $@.sh > $(OUTPUT)$@+ && \
  878. chmod +x $(OUTPUT)$@+ && \
  879. mv $(OUTPUT)$@+ $(OUTPUT)$@
  880. configure: configure.ac
  881. $(QUIET_GEN)$(RM) $@ $<+ && \
  882. sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  883. $< > $<+ && \
  884. autoconf -o $@ $<+ && \
  885. $(RM) $<+
  886. # These can record PERF_VERSION
  887. $(OUTPUT)perf.o perf.spec \
  888. $(patsubst %.sh,%,$(SCRIPT_SH)) \
  889. $(patsubst %.perl,%,$(SCRIPT_PERL)) \
  890. : $(OUTPUT)PERF-VERSION-FILE
  891. $(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
  892. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  893. $(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
  894. $(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $<
  895. $(OUTPUT)%.o: %.S
  896. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  897. $(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
  898. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  899. '-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
  900. '-DBINDIR="$(bindir_relative_SQ)"' \
  901. '-DPREFIX="$(prefix_SQ)"' \
  902. $<
  903. $(OUTPUT)builtin-init-db.o: builtin-init-db.c $(OUTPUT)PERF-CFLAGS
  904. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $<
  905. $(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
  906. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  907. $(OUTPUT)util/ui/browser.o: util/ui/browser.c $(OUTPUT)PERF-CFLAGS
  908. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  909. $(OUTPUT)util/ui/browsers/annotate.o: util/ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
  910. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  911. $(OUTPUT)util/ui/browsers/hists.o: util/ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
  912. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  913. $(OUTPUT)util/ui/browsers/map.o: util/ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
  914. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  915. $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
  916. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  917. $(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
  918. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  919. $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  920. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  921. $(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
  922. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  923. $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  924. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  925. $(OUTPUT)perf-%$X: %.o $(PERFLIBS)
  926. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
  927. $(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
  928. $(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
  929. builtin-revert.o wt-status.o: wt-status.h
  930. # we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
  931. # we depend the various files onto their directories.
  932. DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
  933. $(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
  934. # In the second step, we make a rule to actually create these directories
  935. $(sort $(dir $(DIRECTORY_DEPS))):
  936. $(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
  937. $(LIB_FILE): $(LIB_OBJS)
  938. $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
  939. doc:
  940. $(MAKE) -C Documentation all
  941. man:
  942. $(MAKE) -C Documentation man
  943. html:
  944. $(MAKE) -C Documentation html
  945. info:
  946. $(MAKE) -C Documentation info
  947. pdf:
  948. $(MAKE) -C Documentation pdf
  949. TAGS:
  950. $(RM) TAGS
  951. $(FIND) . -name '*.[hcS]' -print | xargs etags -a
  952. tags:
  953. $(RM) tags
  954. $(FIND) . -name '*.[hcS]' -print | xargs ctags -a
  955. cscope:
  956. $(RM) cscope*
  957. $(FIND) . -name '*.[hcS]' -print | xargs cscope -b
  958. ### Detect prefix changes
  959. TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
  960. $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
  961. $(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
  962. @FLAGS='$(TRACK_CFLAGS)'; \
  963. if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
  964. echo 1>&2 " * new build flags or prefix"; \
  965. echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
  966. fi
  967. # We need to apply sq twice, once to protect from the shell
  968. # that runs $(OUTPUT)PERF-BUILD-OPTIONS, and then again to protect it
  969. # and the first level quoting from the shell that runs "echo".
  970. $(OUTPUT)PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS
  971. @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
  972. @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
  973. @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
  974. @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
  975. ### Testing rules
  976. #
  977. # None right now:
  978. #
  979. # TEST_PROGRAMS += test-something$X
  980. all:: $(TEST_PROGRAMS)
  981. # GNU make supports exporting all variables by "export" without parameters.
  982. # However, the environment gets quite big, and some programs have problems
  983. # with that.
  984. export NO_SVN_TESTS
  985. check: $(OUTPUT)common-cmds.h
  986. if sparse; \
  987. then \
  988. for i in *.c */*.c; \
  989. do \
  990. sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
  991. done; \
  992. else \
  993. echo 2>&1 "Did you mean 'make test'?"; \
  994. exit 1; \
  995. fi
  996. remove-dashes:
  997. ./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS)
  998. ### Installation rules
  999. ifneq ($(filter /%,$(firstword $(template_dir))),)
  1000. template_instdir = $(template_dir)
  1001. else
  1002. template_instdir = $(prefix)/$(template_dir)
  1003. endif
  1004. export template_instdir
  1005. ifneq ($(filter /%,$(firstword $(perfexecdir))),)
  1006. perfexec_instdir = $(perfexecdir)
  1007. else
  1008. perfexec_instdir = $(prefix)/$(perfexecdir)
  1009. endif
  1010. perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
  1011. export perfexec_instdir
  1012. install: all
  1013. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
  1014. $(INSTALL) $(OUTPUT)perf$X '$(DESTDIR_SQ)$(bindir_SQ)'
  1015. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  1016. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  1017. $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  1018. $(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  1019. $(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
  1020. $(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  1021. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  1022. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  1023. $(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  1024. $(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'
  1025. $(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  1026. ifdef BUILT_INS
  1027. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  1028. $(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  1029. ifneq (,$X)
  1030. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) $(OUTPUT)perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';)
  1031. endif
  1032. endif
  1033. install-doc:
  1034. $(MAKE) -C Documentation install
  1035. install-man:
  1036. $(MAKE) -C Documentation install-man
  1037. install-html:
  1038. $(MAKE) -C Documentation install-html
  1039. install-info:
  1040. $(MAKE) -C Documentation install-info
  1041. install-pdf:
  1042. $(MAKE) -C Documentation install-pdf
  1043. quick-install-doc:
  1044. $(MAKE) -C Documentation quick-install
  1045. quick-install-man:
  1046. $(MAKE) -C Documentation quick-install-man
  1047. quick-install-html:
  1048. $(MAKE) -C Documentation quick-install-html
  1049. ### Maintainer's dist rules
  1050. #
  1051. # None right now
  1052. #
  1053. #
  1054. # perf.spec: perf.spec.in
  1055. # sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+
  1056. # mv $@+ $@
  1057. #
  1058. # PERF_TARNAME=perf-$(PERF_VERSION)
  1059. # dist: perf.spec perf-archive$(X) configure
  1060. # ./perf-archive --format=tar \
  1061. # --prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar
  1062. # @mkdir -p $(PERF_TARNAME)
  1063. # @cp perf.spec configure $(PERF_TARNAME)
  1064. # @echo $(PERF_VERSION) > $(PERF_TARNAME)/version
  1065. # $(TAR) rf $(PERF_TARNAME).tar \
  1066. # $(PERF_TARNAME)/perf.spec \
  1067. # $(PERF_TARNAME)/configure \
  1068. # $(PERF_TARNAME)/version
  1069. # @$(RM) -r $(PERF_TARNAME)
  1070. # gzip -f -9 $(PERF_TARNAME).tar
  1071. #
  1072. # htmldocs = perf-htmldocs-$(PERF_VERSION)
  1073. # manpages = perf-manpages-$(PERF_VERSION)
  1074. # dist-doc:
  1075. # $(RM) -r .doc-tmp-dir
  1076. # mkdir .doc-tmp-dir
  1077. # $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
  1078. # cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
  1079. # gzip -n -9 -f $(htmldocs).tar
  1080. # :
  1081. # $(RM) -r .doc-tmp-dir
  1082. # mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7
  1083. # $(MAKE) -C Documentation DESTDIR=./ \
  1084. # man1dir=../.doc-tmp-dir/man1 \
  1085. # man5dir=../.doc-tmp-dir/man5 \
  1086. # man7dir=../.doc-tmp-dir/man7 \
  1087. # install
  1088. # cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
  1089. # gzip -n -9 -f $(manpages).tar
  1090. # $(RM) -r .doc-tmp-dir
  1091. #
  1092. # rpm: dist
  1093. # $(RPMBUILD) -ta $(PERF_TARNAME).tar.gz
  1094. ### Cleaning rules
  1095. distclean: clean
  1096. # $(RM) configure
  1097. clean:
  1098. $(RM) *.o */*.o */*/*.o */*/*/*.o $(LIB_FILE)
  1099. $(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X
  1100. $(RM) $(TEST_PROGRAMS)
  1101. $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
  1102. $(RM) -r autom4te.cache
  1103. $(RM) config.log config.mak.autogen config.mak.append config.status config.cache
  1104. $(RM) -r $(PERF_TARNAME) .doc-tmp-dir
  1105. $(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz
  1106. $(RM) $(htmldocs).tar.gz $(manpages).tar.gz
  1107. $(MAKE) -C Documentation/ clean
  1108. $(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-BUILD-OPTIONS
  1109. .PHONY: all install clean strip
  1110. .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
  1111. .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
  1112. .PHONY: .FORCE-PERF-BUILD-OPTIONS
  1113. ### Make sure built-ins do not have dups and listed in perf.c
  1114. #
  1115. check-builtins::
  1116. ./check-builtins.sh
  1117. ### Test suite coverage testing
  1118. #
  1119. # None right now
  1120. #
  1121. # .PHONY: coverage coverage-clean coverage-build coverage-report
  1122. #
  1123. # coverage:
  1124. # $(MAKE) coverage-build
  1125. # $(MAKE) coverage-report
  1126. #
  1127. # coverage-clean:
  1128. # rm -f *.gcda *.gcno
  1129. #
  1130. # COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs
  1131. # COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov
  1132. #
  1133. # coverage-build: coverage-clean
  1134. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all
  1135. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \
  1136. # -j1 test
  1137. #
  1138. # coverage-report:
  1139. # gcov -b *.c */*.c
  1140. # grep '^function.*called 0 ' *.c.gcov */*.c.gcov \
  1141. # | sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \
  1142. # | tee coverage-untested-functions