123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520 |
- /*
- * Copyright (C) 1995, 1996 Gero Kuhlmann <gero@gkminix.han.de>
- *
- * Allow an NFS filesystem to be mounted as root. The way this works is:
- * (1) Use the IP autoconfig mechanism to set local IP addresses and routes.
- * (2) Handle RPC negotiation with the system which replied to RARP or
- * was reported as a boot server by BOOTP or manually.
- * (3) The actual mounting is done later, when init() is running.
- *
- *
- * Changes:
- *
- * Alan Cox : Removed get_address name clash with FPU.
- * Alan Cox : Reformatted a bit.
- * Gero Kuhlmann : Code cleanup
- * Michael Rausch : Fixed recognition of an incoming RARP answer.
- * Martin Mares : (2.0) Auto-configuration via BOOTP supported.
- * Martin Mares : Manual selection of interface & BOOTP/RARP.
- * Martin Mares : Using network routes instead of host routes,
- * allowing the default configuration to be used
- * for normal operation of the host.
- * Martin Mares : Randomized timer with exponential backoff
- * installed to minimize network congestion.
- * Martin Mares : Code cleanup.
- * Martin Mares : (2.1) BOOTP and RARP made configuration options.
- * Martin Mares : Server hostname generation fixed.
- * Gerd Knorr : Fixed wired inode handling
- * Martin Mares : (2.2) "0.0.0.0" addresses from command line ignored.
- * Martin Mares : RARP replies not tested for server address.
- * Gero Kuhlmann : (2.3) Some bug fixes and code cleanup again (please
- * send me your new patches _before_ bothering
- * Linus so that I don' always have to cleanup
- * _afterwards_ - thanks)
- * Gero Kuhlmann : Last changes of Martin Mares undone.
- * Gero Kuhlmann : RARP replies are tested for specified server
- * again. However, it's now possible to have
- * different RARP and NFS servers.
- * Gero Kuhlmann : "0.0.0.0" addresses from command line are
- * now mapped to INADDR_NONE.
- * Gero Kuhlmann : Fixed a bug which prevented BOOTP path name
- * from being used (thanks to Leo Spiekman)
- * Andy Walker : Allow to specify the NFS server in nfs_root
- * without giving a path name
- * Swen Thümmler : Allow to specify the NFS options in nfs_root
- * without giving a path name. Fix BOOTP request
- * for domainname (domainname is NIS domain, not
- * DNS domain!). Skip dummy devices for BOOTP.
- * Jacek Zapala : Fixed a bug which prevented server-ip address
- * from nfsroot parameter from being used.
- * Olaf Kirch : Adapted to new NFS code.
- * Jakub Jelinek : Free used code segment.
- * Marko Kohtala : Fixed some bugs.
- * Martin Mares : Debug message cleanup
- * Martin Mares : Changed to use the new generic IP layer autoconfig
- * code. BOOTP and RARP moved there.
- * Martin Mares : Default path now contains host name instead of
- * host IP address (but host name defaults to IP
- * address anyway).
- * Martin Mares : Use root_server_addr appropriately during setup.
- * Martin Mares : Rewrote parameter parsing, now hopefully giving
- * correct overriding.
- * Trond Myklebust : Add in preliminary support for NFSv3 and TCP.
- * Fix bug in root_nfs_addr(). nfs_data.namlen
- * is NOT for the length of the hostname.
- * Hua Qin : Support for mounting root file system via
- * NFS over TCP.
- * Fabian Frederick: Option parser rebuilt (using parser lib)
- */
- #include <linux/types.h>
- #include <linux/string.h>
- #include <linux/kernel.h>
- #include <linux/time.h>
- #include <linux/fs.h>
- #include <linux/init.h>
- #include <linux/sunrpc/clnt.h>
- #include <linux/sunrpc/xprtsock.h>
- #include <linux/nfs.h>
- #include <linux/nfs_fs.h>
- #include <linux/nfs_mount.h>
- #include <linux/in.h>
- #include <linux/major.h>
- #include <linux/utsname.h>
- #include <linux/inet.h>
- #include <linux/root_dev.h>
- #include <net/ipconfig.h>
- #include <linux/parser.h>
- /* Define this to allow debugging output */
- #undef NFSROOT_DEBUG
- #define NFSDBG_FACILITY NFSDBG_ROOT
- /* Default path we try to mount. "%s" gets replaced by our IP address */
- #define NFS_ROOT "/tftpboot/%s"
- /* Parameters passed from the kernel command line */
- static char nfs_root_name[256] __initdata = "";
- /* Address of NFS server */
- static __be32 servaddr __initdata = 0;
- /* Name of directory to mount */
- static char nfs_path[NFS_MAXPATHLEN] __initdata = { 0, };
- /* NFS-related data */
- static struct nfs_mount_data nfs_data __initdata = { 0, };/* NFS mount info */
- static int nfs_port __initdata = 0; /* Port to connect to for NFS */
- static int mount_port __initdata = 0; /* Mount daemon port number */
- /***************************************************************************
- Parsing of options
- ***************************************************************************/
- enum {
- /* Options that take integer arguments */
- Opt_port, Opt_rsize, Opt_wsize, Opt_timeo, Opt_retrans, Opt_acregmin,
- Opt_acregmax, Opt_acdirmin, Opt_acdirmax,
- /* Options that take no arguments */
- Opt_soft, Opt_hard, Opt_intr,
- Opt_nointr, Opt_posix, Opt_noposix, Opt_cto, Opt_nocto, Opt_ac,
- Opt_noac, Opt_lock, Opt_nolock, Opt_v2, Opt_v3, Opt_udp, Opt_tcp,
- Opt_acl, Opt_noacl,
- /* Error token */
- Opt_err
- };
- static match_table_t __initdata tokens = {
- {Opt_port, "port=%u"},
- {Opt_rsize, "rsize=%u"},
- {Opt_wsize, "wsize=%u"},
- {Opt_timeo, "timeo=%u"},
- {Opt_retrans, "retrans=%u"},
- {Opt_acregmin, "acregmin=%u"},
- {Opt_acregmax, "acregmax=%u"},
- {Opt_acdirmin, "acdirmin=%u"},
- {Opt_acdirmax, "acdirmax=%u"},
- {Opt_soft, "soft"},
- {Opt_hard, "hard"},
- {Opt_intr, "intr"},
- {Opt_nointr, "nointr"},
- {Opt_posix, "posix"},
- {Opt_noposix, "noposix"},
- {Opt_cto, "cto"},
- {Opt_nocto, "nocto"},
- {Opt_ac, "ac"},
- {Opt_noac, "noac"},
- {Opt_lock, "lock"},
- {Opt_nolock, "nolock"},
- {Opt_v2, "nfsvers=2"},
- {Opt_v2, "v2"},
- {Opt_v3, "nfsvers=3"},
- {Opt_v3, "v3"},
- {Opt_udp, "proto=udp"},
- {Opt_udp, "udp"},
- {Opt_tcp, "proto=tcp"},
- {Opt_tcp, "tcp"},
- {Opt_acl, "acl"},
- {Opt_noacl, "noacl"},
- {Opt_err, NULL}
-
- };
- /*
- * Parse option string.
- */
- static int __init root_nfs_parse(char *name, char *buf)
- {
- char *p;
- substring_t args[MAX_OPT_ARGS];
- int option;
- if (!name)
- return 1;
- /* Set the NFS remote path */
- p = strsep(&name, ",");
- if (p[0] != '\0' && strcmp(p, "default") != 0)
- strlcpy(buf, p, NFS_MAXPATHLEN);
- while ((p = strsep (&name, ",")) != NULL) {
- int token;
- if (!*p)
- continue;
- token = match_token(p, tokens, args);
- /* %u tokens only. Beware if you add new tokens! */
- if (token < Opt_soft && match_int(&args[0], &option))
- return 0;
- switch (token) {
- case Opt_port:
- nfs_port = option;
- break;
- case Opt_rsize:
- nfs_data.rsize = option;
- break;
- case Opt_wsize:
- nfs_data.wsize = option;
- break;
- case Opt_timeo:
- nfs_data.timeo = option;
- break;
- case Opt_retrans:
- nfs_data.retrans = option;
- break;
- case Opt_acregmin:
- nfs_data.acregmin = option;
- break;
- case Opt_acregmax:
- nfs_data.acregmax = option;
- break;
- case Opt_acdirmin:
- nfs_data.acdirmin = option;
- break;
- case Opt_acdirmax:
- nfs_data.acdirmax = option;
- break;
- case Opt_soft:
- nfs_data.flags |= NFS_MOUNT_SOFT;
- break;
- case Opt_hard:
- nfs_data.flags &= ~NFS_MOUNT_SOFT;
- break;
- case Opt_intr:
- case Opt_nointr:
- break;
- case Opt_posix:
- nfs_data.flags |= NFS_MOUNT_POSIX;
- break;
- case Opt_noposix:
- nfs_data.flags &= ~NFS_MOUNT_POSIX;
- break;
- case Opt_cto:
- nfs_data.flags &= ~NFS_MOUNT_NOCTO;
- break;
- case Opt_nocto:
- nfs_data.flags |= NFS_MOUNT_NOCTO;
- break;
- case Opt_ac:
- nfs_data.flags &= ~NFS_MOUNT_NOAC;
- break;
- case Opt_noac:
- nfs_data.flags |= NFS_MOUNT_NOAC;
- break;
- case Opt_lock:
- nfs_data.flags &= ~NFS_MOUNT_NONLM;
- break;
- case Opt_nolock:
- nfs_data.flags |= NFS_MOUNT_NONLM;
- break;
- case Opt_v2:
- nfs_data.flags &= ~NFS_MOUNT_VER3;
- break;
- case Opt_v3:
- nfs_data.flags |= NFS_MOUNT_VER3;
- break;
- case Opt_udp:
- nfs_data.flags &= ~NFS_MOUNT_TCP;
- break;
- case Opt_tcp:
- nfs_data.flags |= NFS_MOUNT_TCP;
- break;
- case Opt_acl:
- nfs_data.flags &= ~NFS_MOUNT_NOACL;
- break;
- case Opt_noacl:
- nfs_data.flags |= NFS_MOUNT_NOACL;
- break;
- default:
- printk(KERN_WARNING "Root-NFS: unknown "
- "option: %s\n", p);
- return 0;
- }
- }
- return 1;
- }
- /*
- * Prepare the NFS data structure and parse all options.
- */
- static int __init root_nfs_name(char *name)
- {
- static char buf[NFS_MAXPATHLEN] __initdata;
- char *cp;
- /* Set some default values */
- memset(&nfs_data, 0, sizeof(nfs_data));
- nfs_port = -1;
- nfs_data.version = NFS_MOUNT_VERSION;
- nfs_data.flags = NFS_MOUNT_NONLM; /* No lockd in nfs root yet */
- nfs_data.rsize = NFS_DEF_FILE_IO_SIZE;
- nfs_data.wsize = NFS_DEF_FILE_IO_SIZE;
- nfs_data.acregmin = NFS_DEF_ACREGMIN;
- nfs_data.acregmax = NFS_DEF_ACREGMAX;
- nfs_data.acdirmin = NFS_DEF_ACDIRMIN;
- nfs_data.acdirmax = NFS_DEF_ACDIRMAX;
- strcpy(buf, NFS_ROOT);
- /* Process options received from the remote server */
- root_nfs_parse(root_server_path, buf);
- /* Override them by options set on kernel command-line */
- root_nfs_parse(name, buf);
- cp = utsname()->nodename;
- if (strlen(buf) + strlen(cp) > NFS_MAXPATHLEN) {
- printk(KERN_ERR "Root-NFS: Pathname for remote directory too long.\n");
- return -1;
- }
- sprintf(nfs_path, buf, cp);
- return 1;
- }
- /*
- * Get NFS server address.
- */
- static int __init root_nfs_addr(void)
- {
- if ((servaddr = root_server_addr) == htonl(INADDR_NONE)) {
- printk(KERN_ERR "Root-NFS: No NFS server available, giving up.\n");
- return -1;
- }
- snprintf(nfs_data.hostname, sizeof(nfs_data.hostname),
- "%u.%u.%u.%u", NIPQUAD(servaddr));
- return 0;
- }
- /*
- * Tell the user what's going on.
- */
- #ifdef NFSROOT_DEBUG
- static void __init root_nfs_print(void)
- {
- printk(KERN_NOTICE "Root-NFS: Mounting %s on server %s as root\n",
- nfs_path, nfs_data.hostname);
- printk(KERN_NOTICE "Root-NFS: rsize = %d, wsize = %d, timeo = %d, retrans = %d\n",
- nfs_data.rsize, nfs_data.wsize, nfs_data.timeo, nfs_data.retrans);
- printk(KERN_NOTICE "Root-NFS: acreg (min,max) = (%d,%d), acdir (min,max) = (%d,%d)\n",
- nfs_data.acregmin, nfs_data.acregmax,
- nfs_data.acdirmin, nfs_data.acdirmax);
- printk(KERN_NOTICE "Root-NFS: nfsd port = %d, mountd port = %d, flags = %08x\n",
- nfs_port, mount_port, nfs_data.flags);
- }
- #endif
- static int __init root_nfs_init(void)
- {
- #ifdef NFSROOT_DEBUG
- nfs_debug |= NFSDBG_ROOT;
- #endif
- /*
- * Decode the root directory path name and NFS options from
- * the kernel command line. This has to go here in order to
- * be able to use the client IP address for the remote root
- * directory (necessary for pure RARP booting).
- */
- if (root_nfs_name(nfs_root_name) < 0 ||
- root_nfs_addr() < 0)
- return -1;
- #ifdef NFSROOT_DEBUG
- root_nfs_print();
- #endif
- return 0;
- }
- /*
- * Parse NFS server and directory information passed on the kernel
- * command line.
- */
- static int __init nfs_root_setup(char *line)
- {
- ROOT_DEV = Root_NFS;
- if (line[0] == '/' || line[0] == ',' || (line[0] >= '0' && line[0] <= '9')) {
- strlcpy(nfs_root_name, line, sizeof(nfs_root_name));
- } else {
- int n = strlen(line) + sizeof(NFS_ROOT) - 1;
- if (n >= sizeof(nfs_root_name))
- line[sizeof(nfs_root_name) - sizeof(NFS_ROOT) - 2] = '\0';
- sprintf(nfs_root_name, NFS_ROOT, line);
- }
- root_server_addr = root_nfs_parse_addr(nfs_root_name);
- return 1;
- }
- __setup("nfsroot=", nfs_root_setup);
- /***************************************************************************
- Routines to actually mount the root directory
- ***************************************************************************/
- /*
- * Construct sockaddr_in from address and port number.
- */
- static inline void
- set_sockaddr(struct sockaddr_in *sin, __be32 addr, __be16 port)
- {
- sin->sin_family = AF_INET;
- sin->sin_addr.s_addr = addr;
- sin->sin_port = port;
- }
- /*
- * Query server portmapper for the port of a daemon program.
- */
- static int __init root_nfs_getport(int program, int version, int proto)
- {
- struct sockaddr_in sin;
- printk(KERN_NOTICE "Looking up port of RPC %d/%d on %u.%u.%u.%u\n",
- program, version, NIPQUAD(servaddr));
- set_sockaddr(&sin, servaddr, 0);
- return rpcb_getport_sync(&sin, program, version, proto);
- }
- /*
- * Use portmapper to find mountd and nfsd port numbers if not overriden
- * by the user. Use defaults if portmapper is not available.
- * XXX: Is there any nfs server with no portmapper?
- */
- static int __init root_nfs_ports(void)
- {
- int port;
- int nfsd_ver, mountd_ver;
- int nfsd_port, mountd_port;
- int proto;
- if (nfs_data.flags & NFS_MOUNT_VER3) {
- nfsd_ver = NFS3_VERSION;
- mountd_ver = NFS_MNT3_VERSION;
- nfsd_port = NFS_PORT;
- mountd_port = NFS_MNT_PORT;
- } else {
- nfsd_ver = NFS2_VERSION;
- mountd_ver = NFS_MNT_VERSION;
- nfsd_port = NFS_PORT;
- mountd_port = NFS_MNT_PORT;
- }
- proto = (nfs_data.flags & NFS_MOUNT_TCP) ? IPPROTO_TCP : IPPROTO_UDP;
- if (nfs_port < 0) {
- if ((port = root_nfs_getport(NFS_PROGRAM, nfsd_ver, proto)) < 0) {
- printk(KERN_ERR "Root-NFS: Unable to get nfsd port "
- "number from server, using default\n");
- port = nfsd_port;
- }
- nfs_port = port;
- dprintk("Root-NFS: Portmapper on server returned %d "
- "as nfsd port\n", port);
- }
- if ((port = root_nfs_getport(NFS_MNT_PROGRAM, mountd_ver, proto)) < 0) {
- printk(KERN_ERR "Root-NFS: Unable to get mountd port "
- "number from server, using default\n");
- port = mountd_port;
- }
- mount_port = port;
- dprintk("Root-NFS: mountd port is %d\n", port);
- return 0;
- }
- /*
- * Get a file handle from the server for the directory which is to be
- * mounted.
- */
- static int __init root_nfs_get_handle(void)
- {
- struct nfs_fh fh;
- struct sockaddr_in sin;
- int status;
- int protocol = (nfs_data.flags & NFS_MOUNT_TCP) ?
- XPRT_TRANSPORT_TCP : XPRT_TRANSPORT_UDP;
- int version = (nfs_data.flags & NFS_MOUNT_VER3) ?
- NFS_MNT3_VERSION : NFS_MNT_VERSION;
- set_sockaddr(&sin, servaddr, htons(mount_port));
- status = nfs_mount((struct sockaddr *) &sin, sizeof(sin), NULL,
- nfs_path, version, protocol, &fh);
- if (status < 0)
- printk(KERN_ERR "Root-NFS: Server returned error %d "
- "while mounting %s\n", status, nfs_path);
- else {
- nfs_data.root.size = fh.size;
- memcpy(nfs_data.root.data, fh.data, fh.size);
- }
- return status;
- }
- /*
- * Get the NFS port numbers and file handle, and return the prepared 'data'
- * argument for mount() if everything went OK. Return NULL otherwise.
- */
- void * __init nfs_root_data(void)
- {
- if (root_nfs_init() < 0
- || root_nfs_ports() < 0
- || root_nfs_get_handle() < 0)
- return NULL;
- set_sockaddr((struct sockaddr_in *) &nfs_data.addr, servaddr, htons(nfs_port));
- return (void*)&nfs_data;
- }
|