skd_s1120.h 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354
  1. /* Copyright 2012 STEC, Inc.
  2. *
  3. * This file is licensed under the terms of the 3-clause
  4. * BSD License (http://opensource.org/licenses/BSD-3-Clause)
  5. * or the GNU GPL-2.0 (http://www.gnu.org/licenses/gpl-2.0.html),
  6. * at your option. Both licenses are also available in the LICENSE file
  7. * distributed with this project. This file may not be copied, modified,
  8. * or distributed except in accordance with those terms.
  9. */
  10. #ifndef SKD_S1120_H
  11. #define SKD_S1120_H
  12. #pragma pack(push, s1120_h, 1)
  13. /*
  14. * Q-channel, 64-bit r/w
  15. */
  16. #define FIT_Q_COMMAND 0x400u
  17. #define FIT_QCMD_QID_MASK (0x3 << 1)
  18. #define FIT_QCMD_QID0 (0x0 << 1)
  19. #define FIT_QCMD_QID_NORMAL FIT_QCMD_QID0
  20. #ifndef SKD_OMIT_FROM_SRC_DIST
  21. #define FIT_QCMD_QID1 (0x1 << 1)
  22. #define FIT_QCMD_QID2 (0x2 << 1)
  23. #define FIT_QCMD_QID3 (0x3 << 1)
  24. #endif /* SKD_OMIT_FROM_SRC_DIST */
  25. #define FIT_QCMD_FLUSH_QUEUE (0ull) /* add QID */
  26. #define FIT_QCMD_MSGSIZE_MASK (0x3 << 4)
  27. #define FIT_QCMD_MSGSIZE_64 (0x0 << 4)
  28. #define FIT_QCMD_MSGSIZE_128 (0x1 << 4)
  29. #define FIT_QCMD_MSGSIZE_256 (0x2 << 4)
  30. #define FIT_QCMD_MSGSIZE_512 (0x3 << 4)
  31. #define FIT_QCMD_BASE_ADDRESS_MASK (0xFFFFFFFFFFFFFFC0ull)
  32. /*
  33. * Control, 32-bit r/w
  34. */
  35. #define FIT_CONTROL 0x500u
  36. #ifndef SKD_OMIT_FROM_SRC_DIST
  37. #define FIT_CR_HARD_RESET (1u << 0u)
  38. #endif /* SKD_OMIT_FROM_SRC_DIST */
  39. #define FIT_CR_SOFT_RESET (1u << 1u)
  40. #ifndef SKD_OMIT_FROM_SRC_DIST
  41. #define FIT_CR_DIS_TIMESTAMPS (1u << 6u)
  42. #endif /* SKD_OMIT_FROM_SRC_DIST */
  43. #define FIT_CR_ENABLE_INTERRUPTS (1u << 7u)
  44. /*
  45. * Status, 32-bit, r/o
  46. */
  47. #define FIT_STATUS 0x510u
  48. #define FIT_SR_DRIVE_STATE_MASK 0x000000FFu
  49. #ifndef SKD_OMIT_FROM_SRC_DIST
  50. #define FIT_SR_SIGNATURE (0xFF << 8)
  51. #define FIT_SR_PIO_DMA (1 << 16)
  52. #endif /* SKD_OMIT_FROM_SRC_DIST */
  53. #define FIT_SR_DRIVE_OFFLINE 0x00
  54. #define FIT_SR_DRIVE_INIT 0x01
  55. /* #define FIT_SR_DRIVE_READY 0x02 */
  56. #define FIT_SR_DRIVE_ONLINE 0x03
  57. #define FIT_SR_DRIVE_BUSY 0x04
  58. #define FIT_SR_DRIVE_FAULT 0x05
  59. #define FIT_SR_DRIVE_DEGRADED 0x06
  60. #define FIT_SR_PCIE_LINK_DOWN 0x07
  61. #define FIT_SR_DRIVE_SOFT_RESET 0x08
  62. #define FIT_SR_DRIVE_INIT_FAULT 0x09
  63. #define FIT_SR_DRIVE_BUSY_SANITIZE 0x0A
  64. #define FIT_SR_DRIVE_BUSY_ERASE 0x0B
  65. #define FIT_SR_DRIVE_FW_BOOTING 0x0C
  66. #define FIT_SR_DRIVE_NEED_FW_DOWNLOAD 0xFE
  67. #define FIT_SR_DEVICE_MISSING 0xFF
  68. #define FIT_SR__RESERVED 0xFFFFFF00u
  69. #ifndef SKD_OMIT_FROM_SRC_DIST
  70. /*
  71. * FIT_STATUS - Status register data definition
  72. */
  73. #define FIT_SR_STATE_MASK (0xFF << 0)
  74. #define FIT_SR_SIGNATURE (0xFF << 8)
  75. #define FIT_SR_PIO_DMA (1 << 16)
  76. #endif /* SKD_OMIT_FROM_SRC_DIST */
  77. /*
  78. * Interrupt status, 32-bit r/w1c (w1c ==> write 1 to clear)
  79. */
  80. #define FIT_INT_STATUS_HOST 0x520u
  81. #define FIT_ISH_FW_STATE_CHANGE (1u << 0u)
  82. #define FIT_ISH_COMPLETION_POSTED (1u << 1u)
  83. #define FIT_ISH_MSG_FROM_DEV (1u << 2u)
  84. #define FIT_ISH_UNDEFINED_3 (1u << 3u)
  85. #define FIT_ISH_UNDEFINED_4 (1u << 4u)
  86. #define FIT_ISH_Q0_FULL (1u << 5u)
  87. #define FIT_ISH_Q1_FULL (1u << 6u)
  88. #define FIT_ISH_Q2_FULL (1u << 7u)
  89. #define FIT_ISH_Q3_FULL (1u << 8u)
  90. #define FIT_ISH_QCMD_FIFO_OVERRUN (1u << 9u)
  91. #define FIT_ISH_BAD_EXP_ROM_READ (1u << 10u)
  92. #define FIT_INT_DEF_MASK \
  93. (FIT_ISH_FW_STATE_CHANGE | \
  94. FIT_ISH_COMPLETION_POSTED | \
  95. FIT_ISH_MSG_FROM_DEV | \
  96. FIT_ISH_Q0_FULL | \
  97. FIT_ISH_Q1_FULL | \
  98. FIT_ISH_Q2_FULL | \
  99. FIT_ISH_Q3_FULL | \
  100. FIT_ISH_QCMD_FIFO_OVERRUN | \
  101. FIT_ISH_BAD_EXP_ROM_READ)
  102. #define FIT_INT_QUEUE_FULL \
  103. (FIT_ISH_Q0_FULL | \
  104. FIT_ISH_Q1_FULL | \
  105. FIT_ISH_Q2_FULL | \
  106. FIT_ISH_Q3_FULL)
  107. #define MSI_MSG_NWL_ERROR_0 0x00000000
  108. #define MSI_MSG_NWL_ERROR_1 0x00000001
  109. #define MSI_MSG_NWL_ERROR_2 0x00000002
  110. #define MSI_MSG_NWL_ERROR_3 0x00000003
  111. #define MSI_MSG_STATE_CHANGE 0x00000004
  112. #define MSI_MSG_COMPLETION_POSTED 0x00000005
  113. #define MSI_MSG_MSG_FROM_DEV 0x00000006
  114. #define MSI_MSG_RESERVED_0 0x00000007
  115. #define MSI_MSG_RESERVED_1 0x00000008
  116. #define MSI_MSG_QUEUE_0_FULL 0x00000009
  117. #define MSI_MSG_QUEUE_1_FULL 0x0000000A
  118. #define MSI_MSG_QUEUE_2_FULL 0x0000000B
  119. #define MSI_MSG_QUEUE_3_FULL 0x0000000C
  120. #define FIT_INT_RESERVED_MASK \
  121. (FIT_ISH_UNDEFINED_3 | \
  122. FIT_ISH_UNDEFINED_4)
  123. /*
  124. * Interrupt mask, 32-bit r/w
  125. * Bit definitions are the same as FIT_INT_STATUS_HOST
  126. */
  127. #define FIT_INT_MASK_HOST 0x528u
  128. /*
  129. * Message to device, 32-bit r/w
  130. */
  131. #define FIT_MSG_TO_DEVICE 0x540u
  132. /*
  133. * Message from device, 32-bit, r/o
  134. */
  135. #define FIT_MSG_FROM_DEVICE 0x548u
  136. /*
  137. * 32-bit messages to/from device, composition/extraction macros
  138. */
  139. #define FIT_MXD_CONS(TYPE, PARAM, DATA) \
  140. ((((TYPE) & 0xFFu) << 24u) | \
  141. (((PARAM) & 0xFFu) << 16u) | \
  142. (((DATA) & 0xFFFFu) << 0u))
  143. #define FIT_MXD_TYPE(MXD) (((MXD) >> 24u) & 0xFFu)
  144. #define FIT_MXD_PARAM(MXD) (((MXD) >> 16u) & 0xFFu)
  145. #define FIT_MXD_DATA(MXD) (((MXD) >> 0u) & 0xFFFFu)
  146. /*
  147. * Types of messages to/from device
  148. */
  149. #define FIT_MTD_FITFW_INIT 0x01u
  150. #define FIT_MTD_GET_CMDQ_DEPTH 0x02u
  151. #define FIT_MTD_SET_COMPQ_DEPTH 0x03u
  152. #define FIT_MTD_SET_COMPQ_ADDR 0x04u
  153. #define FIT_MTD_ARM_QUEUE 0x05u
  154. #define FIT_MTD_CMD_LOG_HOST_ID 0x07u
  155. #define FIT_MTD_CMD_LOG_TIME_STAMP_LO 0x08u
  156. #define FIT_MTD_CMD_LOG_TIME_STAMP_HI 0x09u
  157. #define FIT_MFD_SMART_EXCEEDED 0x10u
  158. #define FIT_MFD_POWER_DOWN 0x11u
  159. #define FIT_MFD_OFFLINE 0x12u
  160. #define FIT_MFD_ONLINE 0x13u
  161. #define FIT_MFD_FW_RESTARTING 0x14u
  162. #define FIT_MFD_PM_ACTIVE 0x15u
  163. #define FIT_MFD_PM_STANDBY 0x16u
  164. #define FIT_MFD_PM_SLEEP 0x17u
  165. #define FIT_MFD_CMD_PROGRESS 0x18u
  166. #ifndef SKD_OMIT_FROM_SRC_DIST
  167. #define FIT_MTD_DEBUG 0xFEu
  168. #define FIT_MFD_DEBUG 0xFFu
  169. #endif /* SKD_OMIT_FROM_SRC_DIST */
  170. #define FIT_MFD_MASK (0xFFu)
  171. #define FIT_MFD_DATA_MASK (0xFFu)
  172. #define FIT_MFD_MSG(x) (((x) >> 24) & FIT_MFD_MASK)
  173. #define FIT_MFD_DATA(x) ((x) & FIT_MFD_MASK)
  174. /*
  175. * Extra arg to FIT_MSG_TO_DEVICE, 64-bit r/w
  176. * Used to set completion queue address (FIT_MTD_SET_COMPQ_ADDR)
  177. * (was Response buffer in docs)
  178. */
  179. #define FIT_MSG_TO_DEVICE_ARG 0x580u
  180. /*
  181. * Hardware (ASIC) version, 32-bit r/o
  182. */
  183. #define FIT_HW_VERSION 0x588u
  184. /*
  185. * Scatter/gather list descriptor.
  186. * 32-bytes and must be aligned on a 32-byte boundary.
  187. * All fields are in little endian order.
  188. */
  189. struct fit_sg_descriptor {
  190. uint32_t control;
  191. uint32_t byte_count;
  192. uint64_t host_side_addr;
  193. uint64_t dev_side_addr;
  194. uint64_t next_desc_ptr;
  195. };
  196. #define FIT_SGD_CONTROL_NOT_LAST 0x000u
  197. #define FIT_SGD_CONTROL_LAST 0x40Eu
  198. /*
  199. * Header at the beginning of a FIT message. The header
  200. * is followed by SSDI requests each 64 bytes.
  201. * A FIT message can be up to 512 bytes long and must start
  202. * on a 64-byte boundary.
  203. */
  204. struct fit_msg_hdr {
  205. uint8_t protocol_id;
  206. uint8_t num_protocol_cmds_coalesced;
  207. uint8_t _reserved[62];
  208. };
  209. #define FIT_PROTOCOL_ID_FIT 1
  210. #define FIT_PROTOCOL_ID_SSDI 2
  211. #define FIT_PROTOCOL_ID_SOFIT 3
  212. #define FIT_PROTOCOL_MINOR_VER(mtd_val) ((mtd_val >> 16) & 0xF)
  213. #define FIT_PROTOCOL_MAJOR_VER(mtd_val) ((mtd_val >> 20) & 0xF)
  214. #ifndef SKD_OMIT_FROM_SRC_DIST
  215. /*
  216. * Format of a completion entry. The completion queue is circular
  217. * and must have at least as many entries as the maximum number
  218. * of commands that may be issued to the device.
  219. *
  220. * There are no head/tail pointers. The cycle value is used to
  221. * infer the presence of new completion records.
  222. * Initially the cycle in all entries is 0, the index is 0, and
  223. * the cycle value to expect is 1. When completions are added
  224. * their cycle values are set to 1. When the index wraps the
  225. * cycle value to expect is incremented.
  226. *
  227. * Command_context is opaque and taken verbatim from the SSDI command.
  228. * All other fields are big endian.
  229. */
  230. #endif /* SKD_OMIT_FROM_SRC_DIST */
  231. #define FIT_PROTOCOL_VERSION_0 0
  232. /*
  233. * Protocol major version 1 completion entry.
  234. * The major protocol version is found in bits
  235. * 20-23 of the FIT_MTD_FITFW_INIT response.
  236. */
  237. struct fit_completion_entry_v1 {
  238. uint32_t num_returned_bytes;
  239. uint16_t tag;
  240. uint8_t status; /* SCSI status */
  241. uint8_t cycle;
  242. };
  243. #define FIT_PROTOCOL_VERSION_1 1
  244. #define FIT_PROTOCOL_VERSION_CURRENT FIT_PROTOCOL_VERSION_1
  245. struct fit_comp_error_info {
  246. uint8_t type:7; /* 00: Bits0-6 indicates the type of sense data. */
  247. uint8_t valid:1; /* 00: Bit 7 := 1 ==> info field is valid. */
  248. uint8_t reserved0; /* 01: Obsolete field */
  249. uint8_t key:4; /* 02: Bits0-3 indicate the sense key. */
  250. uint8_t reserved2:1; /* 02: Reserved bit. */
  251. uint8_t bad_length:1; /* 02: Incorrect Length Indicator */
  252. uint8_t end_medium:1; /* 02: End of Medium */
  253. uint8_t file_mark:1; /* 02: Filemark */
  254. uint8_t info[4]; /* 03: */
  255. uint8_t reserved1; /* 07: Additional Sense Length */
  256. uint8_t cmd_spec[4]; /* 08: Command Specific Information */
  257. uint8_t code; /* 0C: Additional Sense Code */
  258. uint8_t qual; /* 0D: Additional Sense Code Qualifier */
  259. uint8_t fruc; /* 0E: Field Replaceable Unit Code */
  260. uint8_t sks_high:7; /* 0F: Sense Key Specific (MSB) */
  261. uint8_t sks_valid:1; /* 0F: Sense Key Specific Valid */
  262. uint16_t sks_low; /* 10: Sense Key Specific (LSW) */
  263. uint16_t reserved3; /* 12: Part of additional sense bytes (unused) */
  264. uint16_t uec; /* 14: Additional Sense Bytes */
  265. uint64_t per; /* 16: Additional Sense Bytes */
  266. uint8_t reserved4[2]; /* 1E: Additional Sense Bytes (unused) */
  267. };
  268. /* Task management constants */
  269. #define SOFT_TASK_SIMPLE 0x00
  270. #define SOFT_TASK_HEAD_OF_QUEUE 0x01
  271. #define SOFT_TASK_ORDERED 0x02
  272. /* Version zero has the last 32 bits reserved,
  273. * Version one has the last 32 bits sg_list_len_bytes;
  274. */
  275. struct skd_command_header {
  276. uint64_t sg_list_dma_address;
  277. uint16_t tag;
  278. uint8_t attribute;
  279. uint8_t add_cdb_len; /* In 32 bit words */
  280. uint32_t sg_list_len_bytes;
  281. };
  282. struct skd_scsi_request {
  283. struct skd_command_header hdr;
  284. unsigned char cdb[16];
  285. /* unsigned char _reserved[16]; */
  286. };
  287. struct driver_inquiry_data {
  288. uint8_t peripheral_device_type:5;
  289. uint8_t qualifier:3;
  290. uint8_t page_code;
  291. uint16_t page_length;
  292. uint16_t pcie_bus_number;
  293. uint8_t pcie_device_number;
  294. uint8_t pcie_function_number;
  295. uint8_t pcie_link_speed;
  296. uint8_t pcie_link_lanes;
  297. uint16_t pcie_vendor_id;
  298. uint16_t pcie_device_id;
  299. uint16_t pcie_subsystem_vendor_id;
  300. uint16_t pcie_subsystem_device_id;
  301. uint8_t reserved1[2];
  302. uint8_t reserved2[3];
  303. uint8_t driver_version_length;
  304. uint8_t driver_version[0x14];
  305. };
  306. #pragma pack(pop, s1120_h)
  307. #endif /* SKD_S1120_H */