qcserial.c 9.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281
  1. /*
  2. * Qualcomm Serial USB driver
  3. *
  4. * Copyright (c) 2008 QUALCOMM Incorporated.
  5. * Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
  6. * Copyright (c) 2009 Novell Inc.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License version
  10. * 2 as published by the Free Software Foundation.
  11. *
  12. */
  13. #include <linux/tty.h>
  14. #include <linux/tty_flip.h>
  15. #include <linux/usb.h>
  16. #include <linux/usb/serial.h>
  17. #include <linux/slab.h>
  18. #include "usb-wwan.h"
  19. #define DRIVER_AUTHOR "Qualcomm Inc"
  20. #define DRIVER_DESC "Qualcomm USB Serial driver"
  21. static int debug;
  22. static const struct usb_device_id id_table[] = {
  23. {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */
  24. {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
  25. {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
  26. {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
  27. {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
  28. {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
  29. {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
  30. {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
  31. {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
  32. {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
  33. {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
  34. {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
  35. {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
  36. {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
  37. {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
  38. {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
  39. {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
  40. {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
  41. {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
  42. {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
  43. {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
  44. {USB_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
  45. {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
  46. {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
  47. {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
  48. {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
  49. {USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */
  50. {USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
  51. {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */
  52. {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
  53. {USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */
  54. {USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
  55. {USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */
  56. {USB_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
  57. {USB_DEVICE(0x03f0, 0x241d)}, /* HP Gobi 2000 QDL device (VP412) */
  58. {USB_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
  59. {USB_DEVICE(0x05c6, 0x9214)}, /* Acer Gobi 2000 QDL device (VP413) */
  60. {USB_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
  61. {USB_DEVICE(0x05c6, 0x9264)}, /* Asus Gobi 2000 QDL device (VR305) */
  62. {USB_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
  63. {USB_DEVICE(0x05c6, 0x9234)}, /* Top Global Gobi 2000 QDL device (VR306) */
  64. {USB_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
  65. {USB_DEVICE(0x05c6, 0x9274)}, /* iRex Technologies Gobi 2000 QDL device (VR307) */
  66. {USB_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
  67. {USB_DEVICE(0x1199, 0x9000)}, /* Sierra Wireless Gobi 2000 QDL device (VT773) */
  68. {USB_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  69. {USB_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  70. {USB_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  71. {USB_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  72. {USB_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  73. {USB_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  74. {USB_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  75. {USB_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  76. {USB_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  77. {USB_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
  78. {USB_DEVICE(0x16d8, 0x8001)}, /* CMDTech Gobi 2000 QDL device (VU922) */
  79. {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
  80. {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */
  81. {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
  82. { } /* Terminating entry */
  83. };
  84. MODULE_DEVICE_TABLE(usb, id_table);
  85. static struct usb_driver qcdriver = {
  86. .name = "qcserial",
  87. .probe = usb_serial_probe,
  88. .disconnect = usb_serial_disconnect,
  89. .id_table = id_table,
  90. .suspend = usb_serial_suspend,
  91. .resume = usb_serial_resume,
  92. .supports_autosuspend = true,
  93. };
  94. static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
  95. {
  96. struct usb_wwan_intf_private *data;
  97. struct usb_host_interface *intf = serial->interface->cur_altsetting;
  98. int retval = -ENODEV;
  99. __u8 nintf;
  100. __u8 ifnum;
  101. dbg("%s", __func__);
  102. nintf = serial->dev->actconfig->desc.bNumInterfaces;
  103. dbg("Num Interfaces = %d", nintf);
  104. ifnum = intf->desc.bInterfaceNumber;
  105. dbg("This Interface = %d", ifnum);
  106. data = kzalloc(sizeof(struct usb_wwan_intf_private),
  107. GFP_KERNEL);
  108. if (!data)
  109. return -ENOMEM;
  110. spin_lock_init(&data->susp_lock);
  111. usb_enable_autosuspend(serial->dev);
  112. switch (nintf) {
  113. case 1:
  114. /* QDL mode */
  115. /* Gobi 2000 has a single altsetting, older ones have two */
  116. if (serial->interface->num_altsetting == 2)
  117. intf = &serial->interface->altsetting[1];
  118. else if (serial->interface->num_altsetting > 2)
  119. break;
  120. if (intf->desc.bNumEndpoints == 2 &&
  121. usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
  122. usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
  123. dbg("QDL port found");
  124. if (serial->interface->num_altsetting == 1) {
  125. retval = 0; /* Success */
  126. break;
  127. }
  128. retval = usb_set_interface(serial->dev, ifnum, 1);
  129. if (retval < 0) {
  130. dev_err(&serial->dev->dev,
  131. "Could not set interface, error %d\n",
  132. retval);
  133. retval = -ENODEV;
  134. kfree(data);
  135. }
  136. }
  137. break;
  138. case 3:
  139. case 4:
  140. /* Composite mode */
  141. /* ifnum == 0 is a broadband network adapter */
  142. if (ifnum == 1) {
  143. /*
  144. * Diagnostics Monitor (serial line 9600 8N1)
  145. * Qualcomm DM protocol
  146. * use "libqcdm" (ModemManager) for communication
  147. */
  148. dbg("Diagnostics Monitor found");
  149. retval = usb_set_interface(serial->dev, ifnum, 0);
  150. if (retval < 0) {
  151. dev_err(&serial->dev->dev,
  152. "Could not set interface, error %d\n",
  153. retval);
  154. retval = -ENODEV;
  155. kfree(data);
  156. }
  157. } else if (ifnum == 2) {
  158. dbg("Modem port found");
  159. retval = usb_set_interface(serial->dev, ifnum, 0);
  160. if (retval < 0) {
  161. dev_err(&serial->dev->dev,
  162. "Could not set interface, error %d\n",
  163. retval);
  164. retval = -ENODEV;
  165. kfree(data);
  166. }
  167. } else if (ifnum==3) {
  168. /*
  169. * NMEA (serial line 9600 8N1)
  170. * # echo "\$GPS_START" > /dev/ttyUSBx
  171. * # echo "\$GPS_STOP" > /dev/ttyUSBx
  172. */
  173. dbg("NMEA GPS interface found");
  174. retval = usb_set_interface(serial->dev, ifnum, 0);
  175. if (retval < 0) {
  176. dev_err(&serial->dev->dev,
  177. "Could not set interface, error %d\n",
  178. retval);
  179. retval = -ENODEV;
  180. kfree(data);
  181. }
  182. }
  183. break;
  184. default:
  185. dev_err(&serial->dev->dev,
  186. "unknown number of interfaces: %d\n", nintf);
  187. kfree(data);
  188. retval = -ENODEV;
  189. }
  190. /* Set serial->private if not returning -ENODEV */
  191. if (retval != -ENODEV)
  192. usb_set_serial_data(serial, data);
  193. return retval;
  194. }
  195. static void qc_release(struct usb_serial *serial)
  196. {
  197. struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
  198. dbg("%s", __func__);
  199. /* Call usb_wwan release & free the private data allocated in qcprobe */
  200. usb_wwan_release(serial);
  201. usb_set_serial_data(serial, NULL);
  202. kfree(priv);
  203. }
  204. static struct usb_serial_driver qcdevice = {
  205. .driver = {
  206. .owner = THIS_MODULE,
  207. .name = "qcserial",
  208. },
  209. .description = "Qualcomm USB modem",
  210. .id_table = id_table,
  211. .usb_driver = &qcdriver,
  212. .num_ports = 1,
  213. .probe = qcprobe,
  214. .open = usb_wwan_open,
  215. .close = usb_wwan_close,
  216. .write = usb_wwan_write,
  217. .write_room = usb_wwan_write_room,
  218. .chars_in_buffer = usb_wwan_chars_in_buffer,
  219. .attach = usb_wwan_startup,
  220. .disconnect = usb_wwan_disconnect,
  221. .release = qc_release,
  222. #ifdef CONFIG_PM
  223. .suspend = usb_wwan_suspend,
  224. .resume = usb_wwan_resume,
  225. #endif
  226. };
  227. static int __init qcinit(void)
  228. {
  229. int retval;
  230. retval = usb_serial_register(&qcdevice);
  231. if (retval)
  232. return retval;
  233. retval = usb_register(&qcdriver);
  234. if (retval) {
  235. usb_serial_deregister(&qcdevice);
  236. return retval;
  237. }
  238. return 0;
  239. }
  240. static void __exit qcexit(void)
  241. {
  242. usb_deregister(&qcdriver);
  243. usb_serial_deregister(&qcdevice);
  244. }
  245. module_init(qcinit);
  246. module_exit(qcexit);
  247. MODULE_AUTHOR(DRIVER_AUTHOR);
  248. MODULE_DESCRIPTION(DRIVER_DESC);
  249. MODULE_LICENSE("GPL v2");
  250. module_param(debug, bool, S_IRUGO | S_IWUSR);
  251. MODULE_PARM_DESC(debug, "Debug enabled or not");