linux-vybrid_public/scripts/Makefile.build

# ==========================================================================
# Building
# ==========================================================================

src := $(obj)

PHONY := __build
__build:

# Init all relevant variables used in kbuild files so
# 1) they have correct type
# 2) they do not inherit any value from the environment
obj-y :=
obj-m :=
lib-y :=
lib-m :=
always :=
targets :=
subdir-y :=
subdir-m :=
EXTRA_AFLAGS   :=
EXTRA_CFLAGS   :=
EXTRA_CPPFLAGS :=
EXTRA_LDFLAGS  :=
asflags-y  :=
ccflags-y  :=
cppflags-y :=
ldflags-y  :=

# Read auto.conf if it exists, otherwise ignore
-include include/config/auto.conf

include scripts/Kbuild.include

# For backward compatibility check that these variables do not change
save-cflags := $(CFLAGS)

# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
include $(kbuild-file)

# If the save-* variables changed error out
ifeq ($(KBUILD_NOPEDANTIC),)
        ifneq ("$(save-cflags)","$(CFLAGS)")
                $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
        endif
endif
include scripts/Makefile.lib

ifdef host-progs
ifneq ($(hostprogs-y),$(host-progs))
$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
hostprogs-y += $(host-progs)
endif
endif

# Do not include host rules unless needed
ifneq ($(hostprogs-y)$(hostprogs-m),)
include scripts/Makefile.host
endif

ifneq ($(KBUILD_SRC),)
# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))

# Create directories for object files if directory does not exist
# Needed when obj-y := dir/file.o syntax is used
_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
endif

ifndef obj
$(warning kbuild: Makefile.build is included improperly)
endif

# ===========================================================================

ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
lib-target := $(obj)/lib.a
endif

ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif

modorder-target := $(obj)/modules.order

# We keep a list of all modules in $(MODVERDIR)

__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
	 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
	 $(subdir-ym) $(always)
	@:

# Linus' kernel sanity checking tool
ifneq ($(KBUILD_CHECKSRC),0)
  ifeq ($(KBUILD_CHECKSRC),2)
    quiet_cmd_force_checksrc = CHECK   $<
          cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
  else
      quiet_cmd_checksrc     = CHECK   $<
            cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
  endif
endif

# Do section mismatch analysis for each module/built-in.o
ifdef CONFIG_DEBUG_SECTION_MISMATCH
  cmd_secanalysis = ; scripts/mod/modpost $@
endif

# Compile C sources (.c)
# ---------------------------------------------------------------------------

# Default is built-in, unless we know otherwise
modkern_cflags := $(CFLAGS_KERNEL)
quiet_modtag := $(empty)   $(empty)

$(real-objs-m)        : modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m:.o=.i)  : modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m:.o=.s)  : modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m:.o=.lst): modkern_cflags := $(CFLAGS_MODULE)

$(real-objs-m)        : quiet_modtag := [M]
$(real-objs-m:.o=.i)  : quiet_modtag := [M]
$(real-objs-m:.o=.s)  : quiet_modtag := [M]
$(real-objs-m:.o=.lst): quiet_modtag := [M]

$(obj-m)              : quiet_modtag := [M]

# Default for not multi-part modules
modname = $(basetarget)

$(multi-objs-m)         : modname = $(modname-multi)
$(multi-objs-m:.o=.i)   : modname = $(modname-multi)
$(multi-objs-m:.o=.s)   : modname = $(modname-multi)
$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
$(multi-objs-y)         : modname = $(modname-multi)
$(multi-objs-y:.o=.i)   : modname = $(modname-multi)
$(multi-objs-y:.o=.s)   : modname = $(modname-multi)
$(multi-objs-y:.o=.lst) : modname = $(modname-multi)

quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
cmd_cc_s_c       = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<

$(obj)/%.s: $(src)/%.c FORCE
	$(call if_changed_dep,cc_s_c)

quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
cmd_cc_i_c       = $(CPP) $(c_flags)   -o $@ $<

$(obj)/%.i: $(src)/%.c FORCE
	$(call if_changed_dep,cc_i_c)

cmd_genksyms =                                                              \
    $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
    $(GENKSYMS) -T $@ -A -a $(ARCH)                                         \
     $(if $(KBUILD_PRESERVE),-p)                                            \
     $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))

quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
cmd_cc_symtypes_c =                                                         \
    set -e;                                                                 \
    $(call cmd_genksyms, true) >/dev/null;                                  \
    test -s $@ || rm -f $@

$(obj)/%.symtypes : $(src)/%.c FORCE
	$(call cmd,cc_symtypes_c)

# C (.c) files
# The C file is compiled and updated dependency information is generated.
# (See cmd_cc_o_c + relevant part of rule_cc_o_c)

quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@

ifndef CONFIG_MODVERSIONS
cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<

else
# When module versioning is enabled the following steps are executed:
# o compile a .tmp_<file>.s from <file>.c
# o if .tmp_<file>.s doesn't contain a __ksymtab version, i.e. does
#   not export symbols, we just assemble .tmp_<file>.s to <file>.o and
#   are done.
# o otherwise, we calculate symbol versions using the good old
#   genksyms on the preprocessed source and postprocess them in a way
#   that they are usable as assembly source
# o assemble <file>.o from .tmp_<file>.s forcing inclusion of directives
#   defining the actual values of __crc_*, followed by objcopy-ing them
#   to force these symbols to be local to permit stripping them later.
s_file = $(@D)/.tmp_$(@F:.o=.s)
v_file = $(@D)/.tmp_$(@F:.o=.v)
tmp_o_file = $(@D)/.tmp_$(@F)
no_g_c_flags = $(filter-out -g%,$(c_flags))

cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $<

cmd_modversions =							\
	if grep -q __ksymtab $(s_file); then				\
		if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \
		   && $(CC) $(no_g_c_flags) -c -Wa,$(v_file)		\
			    -o $(tmp_o_file) $(s_file)			\
		   && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w		\
				 $(tmp_o_file) $@;			\
		then							\
			: ;						\
		else							\
			rm -f $@; exit 1;				\
		fi;							\
	else								\
		rm -f $(v_file);					\
		$(CC) $(no_g_c_flags) -c -o $@ $(s_file);		\
	fi;
endif

ifdef CONFIG_FTRACE_MCOUNT_RECORD
cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
	"$(if $(CONFIG_64BIT),64,32)" \
	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" "$(@)";
endif

define rule_cc_o_c
	$(call echo-cmd,checksrc) $(cmd_checksrc)			  \
	$(call echo-cmd,cc_o_c) $(cmd_cc_o_c);				  \
	$(cmd_modversions)						  \
	$(cmd_record_mcount)						  \
	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
	                                              $(dot-target).tmp;  \
	if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then				  \
		echo >> $(dot-target).tmp;				  \
		echo '$@: $(GENKSYMS)' >> $(dot-target).tmp;		  \
		echo '$(GENKSYMS):: ;' >> $(dot-target).tmp;		  \
	fi;								  \
	rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?);			  \
	mv -f $(dot-target).tmp $(dot-target).cmd
endef

# Built-in and composite module parts
$(obj)/%.o: $(src)/%.c FORCE
	$(call cmd,force_checksrc)
	$(call if_changed_rule,cc_o_c)

# Single-part modules are special since we need to mark them in $(MODVERDIR)

$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
	$(call cmd,force_checksrc)
	$(call if_changed_rule,cc_o_c)
	@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)

quiet_cmd_cc_lst_c = MKLST   $@
      cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
		     $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
				     System.map $(OBJDUMP) > $@

$(obj)/%.lst: $(src)/%.c FORCE
	$(call if_changed_dep,cc_lst_c)

# Compile assembler sources (.S)
# ---------------------------------------------------------------------------

modkern_aflags := $(AFLAGS_KERNEL)

$(real-objs-m)      : modkern_aflags := $(AFLAGS_MODULE)
$(real-objs-m:.o=.s): modkern_aflags := $(AFLAGS_MODULE)

quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
cmd_as_s_S       = $(CPP) $(a_flags)   -o $@ $< 

$(obj)/%.s: $(src)/%.S FORCE
	$(call if_changed_dep,as_s_S)

quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<

$(obj)/%.o: $(src)/%.S FORCE
	$(call if_changed_dep,as_o_S)

targets += $(real-objs-y) $(real-objs-m) $(lib-y)
targets += $(extra-y) $(MAKECMDGOALS) $(always)

# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS     $@
      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $<

$(obj)/%.lds: $(src)/%.lds.S FORCE
	$(call if_changed_dep,cpp_lds_S)

# Build the compiled-in targets
# ---------------------------------------------------------------------------

# To build objects in subdirs, we need to descend into the directories
$(sort $(subdir-obj-y)): $(subdir-ym) ;

#
# Rule to compile a set of .o files into one .o file
#
ifdef builtin-target
quiet_cmd_link_o_target = LD      $@
# If the list of objects to link is empty, just create an empty built-in.o
cmd_link_o_target = $(if $(strip $(obj-y)),\
		      $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
		      $(cmd_secanalysis),\
		      rm -f $@; $(AR) rcs $@)

$(builtin-target): $(obj-y) FORCE
	$(call if_changed,link_o_target)

targets += $(builtin-target)
endif # builtin-target

#
# Rule to create modules.order file
#
# Create commands to either record .ko file or cat modules.order from
# a subdirectory
modorder-cmds =						\
	$(foreach m, $(modorder),			\
		$(if $(filter %/modules.order, $m),	\
			cat $m;, echo kernel/$m;))

$(modorder-target): $(subdir-ym) FORCE
	$(Q)(cat /dev/null; $(modorder-cmds)) > $@

#
# Rule to compile a set of .o files into one .a file
#
ifdef lib-target
quiet_cmd_link_l_target = AR      $@
cmd_link_l_target = rm -f $@; $(AR) rcs $@ $(lib-y)

$(lib-target): $(lib-y) FORCE
	$(call if_changed,link_l_target)

targets += $(lib-target)
endif

#
# Rule to link composite objects
#
#  Composite objects are specified in kbuild makefile as follows:
#    <composite-object>-objs := <list of .o files>
#  or
#    <composite-object>-y    := <list of .o files>
link_multi_deps =                     \
$(filter $(addprefix $(obj)/,         \
$($(subst $(obj)/,,$(@:.o=-objs)))    \
$($(subst $(obj)/,,$(@:.o=-y)))), $^)
 
quiet_cmd_link_multi-y = LD      $@
cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)

quiet_cmd_link_multi-m = LD [M]  $@
cmd_link_multi-m = $(cmd_link_multi-y)

# We would rather have a list of rules like
# 	foo.o: $(foo-objs)
# but that's not so easy, so we rather make all composite objects depend
# on the set of all their parts
$(multi-used-y) : %.o: $(multi-objs-y) FORCE
	$(call if_changed,link_multi-y)

$(multi-used-m) : %.o: $(multi-objs-m) FORCE
	$(call if_changed,link_multi-m)
	@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)

targets += $(multi-used-y) $(multi-used-m)


# Descending
# ---------------------------------------------------------------------------

PHONY += $(subdir-ym)
$(subdir-ym):
	$(Q)$(MAKE) $(build)=$@

# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------

PHONY += FORCE

FORCE:

# Read all saved command lines and dependencies for the $(targets) we
# may be building above, using $(if_changed{,_dep}). As an
# optimization, we don't need to read them if the target does not
# exist, we will rebuild anyway in that case.

targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))

ifneq ($(cmd_files),)
  include $(cmd_files)
endif


# Declare the contents of the .PHONY variable as phony.  We keep that
# information in a variable se we can use it in if_changed and friends.

.PHONY: $(PHONY)