yam.c 31 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189
  1. /*****************************************************************************/
  2. /*
  3. * yam.c -- YAM radio modem driver.
  4. *
  5. * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
  6. * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
  7. *
  8. * This program is free software; you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation; either version 2 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21. *
  22. * Please note that the GPL allows you to use the driver, NOT the radio.
  23. * In order to use the radio, you need a license from the communications
  24. * authority of your country.
  25. *
  26. *
  27. * History:
  28. * 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3
  29. * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration
  30. * 0.2 F6FBB 08.06.98 Added delay after FPGA programming
  31. * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2
  32. * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistance
  33. * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics
  34. * 0.6 F6FBB 25.08.98 Added 1200Bds format
  35. * 0.7 F6FBB 12.09.98 Added to the kernel configuration
  36. * 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug
  37. * OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ"
  38. * using dev_kfree_skb_any(). (important in 2.4 kernel)
  39. *
  40. */
  41. /*****************************************************************************/
  42. #include <linux/module.h>
  43. #include <linux/types.h>
  44. #include <linux/net.h>
  45. #include <linux/in.h>
  46. #include <linux/if.h>
  47. #include <linux/slab.h>
  48. #include <linux/errno.h>
  49. #include <linux/bitops.h>
  50. #include <linux/random.h>
  51. #include <asm/io.h>
  52. #include <asm/system.h>
  53. #include <linux/interrupt.h>
  54. #include <linux/ioport.h>
  55. #include <linux/netdevice.h>
  56. #include <linux/if_arp.h>
  57. #include <linux/etherdevice.h>
  58. #include <linux/skbuff.h>
  59. #include <net/ax25.h>
  60. #include <linux/kernel.h>
  61. #include <linux/proc_fs.h>
  62. #include <linux/seq_file.h>
  63. #include <net/net_namespace.h>
  64. #include <asm/uaccess.h>
  65. #include <linux/init.h>
  66. #include <linux/yam.h>
  67. #include "yam9600.h"
  68. #include "yam1200.h"
  69. /* --------------------------------------------------------------------- */
  70. static const char yam_drvname[] = "yam";
  71. static char yam_drvinfo[] __initdata = KERN_INFO "YAM driver version 0.8 by F1OAT/F6FBB\n";
  72. /* --------------------------------------------------------------------- */
  73. #define YAM_9600 1
  74. #define YAM_1200 2
  75. #define NR_PORTS 4
  76. #define YAM_MAGIC 0xF10A7654
  77. /* Transmitter states */
  78. #define TX_OFF 0
  79. #define TX_HEAD 1
  80. #define TX_DATA 2
  81. #define TX_CRC1 3
  82. #define TX_CRC2 4
  83. #define TX_TAIL 5
  84. #define YAM_MAX_FRAME 1024
  85. #define DEFAULT_BITRATE 9600 /* bps */
  86. #define DEFAULT_HOLDD 10 /* sec */
  87. #define DEFAULT_TXD 300 /* ms */
  88. #define DEFAULT_TXTAIL 10 /* ms */
  89. #define DEFAULT_SLOT 100 /* ms */
  90. #define DEFAULT_PERS 64 /* 0->255 */
  91. struct yam_port {
  92. int magic;
  93. int bitrate;
  94. int baudrate;
  95. int iobase;
  96. int irq;
  97. int dupmode;
  98. struct net_device *dev;
  99. /* Stats section */
  100. struct net_device_stats stats;
  101. int nb_rxint;
  102. int nb_mdint;
  103. /* Parameters section */
  104. int txd; /* tx delay */
  105. int holdd; /* duplex ptt delay */
  106. int txtail; /* txtail delay */
  107. int slot; /* slottime */
  108. int pers; /* persistence */
  109. /* Tx section */
  110. int tx_state;
  111. int tx_count;
  112. int slotcnt;
  113. unsigned char tx_buf[YAM_MAX_FRAME];
  114. int tx_len;
  115. int tx_crcl, tx_crch;
  116. struct sk_buff_head send_queue; /* Packets awaiting transmission */
  117. /* Rx section */
  118. int dcd;
  119. unsigned char rx_buf[YAM_MAX_FRAME];
  120. int rx_len;
  121. int rx_crcl, rx_crch;
  122. };
  123. struct yam_mcs {
  124. unsigned char bits[YAM_FPGA_SIZE];
  125. int bitrate;
  126. struct yam_mcs *next;
  127. };
  128. static struct net_device *yam_devs[NR_PORTS];
  129. static struct yam_mcs *yam_data;
  130. static DEFINE_TIMER(yam_timer, NULL, 0, 0);
  131. /* --------------------------------------------------------------------- */
  132. #define RBR(iobase) (iobase+0)
  133. #define THR(iobase) (iobase+0)
  134. #define IER(iobase) (iobase+1)
  135. #define IIR(iobase) (iobase+2)
  136. #define FCR(iobase) (iobase+2)
  137. #define LCR(iobase) (iobase+3)
  138. #define MCR(iobase) (iobase+4)
  139. #define LSR(iobase) (iobase+5)
  140. #define MSR(iobase) (iobase+6)
  141. #define SCR(iobase) (iobase+7)
  142. #define DLL(iobase) (iobase+0)
  143. #define DLM(iobase) (iobase+1)
  144. #define YAM_EXTENT 8
  145. /* Interrupt Identification Register Bit Masks */
  146. #define IIR_NOPEND 1
  147. #define IIR_MSR 0
  148. #define IIR_TX 2
  149. #define IIR_RX 4
  150. #define IIR_LSR 6
  151. #define IIR_TIMEOUT 12 /* Fifo mode only */
  152. #define IIR_MASK 0x0F
  153. /* Interrupt Enable Register Bit Masks */
  154. #define IER_RX 1 /* enable rx interrupt */
  155. #define IER_TX 2 /* enable tx interrupt */
  156. #define IER_LSR 4 /* enable line status interrupts */
  157. #define IER_MSR 8 /* enable modem status interrupts */
  158. /* Modem Control Register Bit Masks */
  159. #define MCR_DTR 0x01 /* DTR output */
  160. #define MCR_RTS 0x02 /* RTS output */
  161. #define MCR_OUT1 0x04 /* OUT1 output (not accessible in RS232) */
  162. #define MCR_OUT2 0x08 /* Master Interrupt enable (must be set on PCs) */
  163. #define MCR_LOOP 0x10 /* Loopback enable */
  164. /* Modem Status Register Bit Masks */
  165. #define MSR_DCTS 0x01 /* Delta CTS input */
  166. #define MSR_DDSR 0x02 /* Delta DSR */
  167. #define MSR_DRIN 0x04 /* Delta RI */
  168. #define MSR_DDCD 0x08 /* Delta DCD */
  169. #define MSR_CTS 0x10 /* CTS input */
  170. #define MSR_DSR 0x20 /* DSR input */
  171. #define MSR_RING 0x40 /* RI input */
  172. #define MSR_DCD 0x80 /* DCD input */
  173. /* line status register bit mask */
  174. #define LSR_RXC 0x01
  175. #define LSR_OE 0x02
  176. #define LSR_PE 0x04
  177. #define LSR_FE 0x08
  178. #define LSR_BREAK 0x10
  179. #define LSR_THRE 0x20
  180. #define LSR_TSRE 0x40
  181. /* Line Control Register Bit Masks */
  182. #define LCR_DLAB 0x80
  183. #define LCR_BREAK 0x40
  184. #define LCR_PZERO 0x28
  185. #define LCR_PEVEN 0x18
  186. #define LCR_PODD 0x08
  187. #define LCR_STOP1 0x00
  188. #define LCR_STOP2 0x04
  189. #define LCR_BIT5 0x00
  190. #define LCR_BIT6 0x02
  191. #define LCR_BIT7 0x01
  192. #define LCR_BIT8 0x03
  193. /* YAM Modem <-> UART Port mapping */
  194. #define TX_RDY MSR_DCTS /* transmitter ready to send */
  195. #define RX_DCD MSR_DCD /* carrier detect */
  196. #define RX_FLAG MSR_RING /* hdlc flag received */
  197. #define FPGA_DONE MSR_DSR /* FPGA is configured */
  198. #define PTT_ON (MCR_RTS|MCR_OUT2) /* activate PTT */
  199. #define PTT_OFF (MCR_DTR|MCR_OUT2) /* release PTT */
  200. #define ENABLE_RXINT IER_RX /* enable uart rx interrupt during rx */
  201. #define ENABLE_TXINT IER_MSR /* enable uart ms interrupt during tx */
  202. #define ENABLE_RTXINT (IER_RX|IER_MSR) /* full duplex operations */
  203. /*************************************************************************
  204. * CRC Tables
  205. ************************************************************************/
  206. static const unsigned char chktabl[256] =
  207. {0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
  208. 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
  209. 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
  210. 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
  211. 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
  212. 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
  213. 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
  214. 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
  215. 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
  216. 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
  217. 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
  218. 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
  219. 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
  220. 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
  221. 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
  222. 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
  223. 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
  224. 0x78};
  225. static const unsigned char chktabh[256] =
  226. {0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
  227. 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
  228. 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
  229. 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
  230. 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
  231. 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
  232. 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
  233. 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
  234. 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
  235. 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
  236. 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
  237. 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
  238. 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
  239. 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
  240. 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
  241. 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
  242. 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
  243. 0x0f};
  244. /*************************************************************************
  245. * FPGA functions
  246. ************************************************************************/
  247. static void delay(int ms)
  248. {
  249. unsigned long timeout = jiffies + ((ms * HZ) / 1000);
  250. while (time_before(jiffies, timeout))
  251. cpu_relax();
  252. }
  253. /*
  254. * reset FPGA
  255. */
  256. static void fpga_reset(int iobase)
  257. {
  258. outb(0, IER(iobase));
  259. outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
  260. outb(1, DLL(iobase));
  261. outb(0, DLM(iobase));
  262. outb(LCR_BIT5, LCR(iobase));
  263. inb(LSR(iobase));
  264. inb(MSR(iobase));
  265. /* turn off FPGA supply voltage */
  266. outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
  267. delay(100);
  268. /* turn on FPGA supply voltage again */
  269. outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
  270. delay(100);
  271. }
  272. /*
  273. * send one byte to FPGA
  274. */
  275. static int fpga_write(int iobase, unsigned char wrd)
  276. {
  277. unsigned char bit;
  278. int k;
  279. unsigned long timeout = jiffies + HZ / 10;
  280. for (k = 0; k < 8; k++) {
  281. bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
  282. outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
  283. wrd <<= 1;
  284. outb(0xfc, THR(iobase));
  285. while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
  286. if (time_after(jiffies, timeout))
  287. return -1;
  288. }
  289. return 0;
  290. }
  291. static unsigned char *add_mcs(unsigned char *bits, int bitrate)
  292. {
  293. struct yam_mcs *p;
  294. /* If it already exists, replace the bit data */
  295. p = yam_data;
  296. while (p) {
  297. if (p->bitrate == bitrate) {
  298. memcpy(p->bits, bits, YAM_FPGA_SIZE);
  299. return p->bits;
  300. }
  301. p = p->next;
  302. }
  303. /* Allocate a new mcs */
  304. if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
  305. printk(KERN_WARNING "YAM: no memory to allocate mcs\n");
  306. return NULL;
  307. }
  308. memcpy(p->bits, bits, YAM_FPGA_SIZE);
  309. p->bitrate = bitrate;
  310. p->next = yam_data;
  311. yam_data = p;
  312. return p->bits;
  313. }
  314. static unsigned char *get_mcs(int bitrate)
  315. {
  316. struct yam_mcs *p;
  317. p = yam_data;
  318. while (p) {
  319. if (p->bitrate == bitrate)
  320. return p->bits;
  321. p = p->next;
  322. }
  323. /* Load predefined mcs data */
  324. switch (bitrate) {
  325. case 1200:
  326. return add_mcs(bits_1200, bitrate);
  327. default:
  328. return add_mcs(bits_9600, bitrate);
  329. }
  330. }
  331. /*
  332. * download bitstream to FPGA
  333. * data is contained in bits[] array in yam1200.h resp. yam9600.h
  334. */
  335. static int fpga_download(int iobase, int bitrate)
  336. {
  337. int i, rc;
  338. unsigned char *pbits;
  339. pbits = get_mcs(bitrate);
  340. if (pbits == NULL)
  341. return -1;
  342. fpga_reset(iobase);
  343. for (i = 0; i < YAM_FPGA_SIZE; i++) {
  344. if (fpga_write(iobase, pbits[i])) {
  345. printk(KERN_ERR "yam: error in write cycle\n");
  346. return -1; /* write... */
  347. }
  348. }
  349. fpga_write(iobase, 0xFF);
  350. rc = inb(MSR(iobase)); /* check DONE signal */
  351. /* Needed for some hardwares */
  352. delay(50);
  353. return (rc & MSR_DSR) ? 0 : -1;
  354. }
  355. /************************************************************************
  356. * Serial port init
  357. ************************************************************************/
  358. static void yam_set_uart(struct net_device *dev)
  359. {
  360. struct yam_port *yp = netdev_priv(dev);
  361. int divisor = 115200 / yp->baudrate;
  362. outb(0, IER(dev->base_addr));
  363. outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
  364. outb(divisor, DLL(dev->base_addr));
  365. outb(0, DLM(dev->base_addr));
  366. outb(LCR_BIT8, LCR(dev->base_addr));
  367. outb(PTT_OFF, MCR(dev->base_addr));
  368. outb(0x00, FCR(dev->base_addr));
  369. /* Flush pending irq */
  370. inb(RBR(dev->base_addr));
  371. inb(MSR(dev->base_addr));
  372. /* Enable rx irq */
  373. outb(ENABLE_RTXINT, IER(dev->base_addr));
  374. }
  375. /* --------------------------------------------------------------------- */
  376. enum uart {
  377. c_uart_unknown, c_uart_8250,
  378. c_uart_16450, c_uart_16550, c_uart_16550A
  379. };
  380. static const char *uart_str[] =
  381. {"unknown", "8250", "16450", "16550", "16550A"};
  382. static enum uart yam_check_uart(unsigned int iobase)
  383. {
  384. unsigned char b1, b2, b3;
  385. enum uart u;
  386. enum uart uart_tab[] =
  387. {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
  388. b1 = inb(MCR(iobase));
  389. outb(b1 | 0x10, MCR(iobase)); /* loopback mode */
  390. b2 = inb(MSR(iobase));
  391. outb(0x1a, MCR(iobase));
  392. b3 = inb(MSR(iobase)) & 0xf0;
  393. outb(b1, MCR(iobase)); /* restore old values */
  394. outb(b2, MSR(iobase));
  395. if (b3 != 0x90)
  396. return c_uart_unknown;
  397. inb(RBR(iobase));
  398. inb(RBR(iobase));
  399. outb(0x01, FCR(iobase)); /* enable FIFOs */
  400. u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
  401. if (u == c_uart_16450) {
  402. outb(0x5a, SCR(iobase));
  403. b1 = inb(SCR(iobase));
  404. outb(0xa5, SCR(iobase));
  405. b2 = inb(SCR(iobase));
  406. if ((b1 != 0x5a) || (b2 != 0xa5))
  407. u = c_uart_8250;
  408. }
  409. return u;
  410. }
  411. /******************************************************************************
  412. * Rx Section
  413. ******************************************************************************/
  414. static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
  415. {
  416. if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
  417. int pkt_len = yp->rx_len - 2 + 1; /* -CRC + kiss */
  418. struct sk_buff *skb;
  419. if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
  420. /* Bad crc */
  421. } else {
  422. if (!(skb = dev_alloc_skb(pkt_len))) {
  423. printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
  424. ++yp->stats.rx_dropped;
  425. } else {
  426. unsigned char *cp;
  427. cp = skb_put(skb, pkt_len);
  428. *cp++ = 0; /* KISS kludge */
  429. memcpy(cp, yp->rx_buf, pkt_len - 1);
  430. skb->protocol = ax25_type_trans(skb, dev);
  431. netif_rx(skb);
  432. ++yp->stats.rx_packets;
  433. }
  434. }
  435. }
  436. yp->rx_len = 0;
  437. yp->rx_crcl = 0x21;
  438. yp->rx_crch = 0xf3;
  439. }
  440. static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
  441. {
  442. if (yp->rx_len < YAM_MAX_FRAME) {
  443. unsigned char c = yp->rx_crcl;
  444. yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
  445. yp->rx_crch = (chktabh[c] ^ rxb);
  446. yp->rx_buf[yp->rx_len++] = rxb;
  447. }
  448. }
  449. /********************************************************************************
  450. * TX Section
  451. ********************************************************************************/
  452. static void ptt_on(struct net_device *dev)
  453. {
  454. outb(PTT_ON, MCR(dev->base_addr));
  455. }
  456. static void ptt_off(struct net_device *dev)
  457. {
  458. outb(PTT_OFF, MCR(dev->base_addr));
  459. }
  460. static int yam_send_packet(struct sk_buff *skb, struct net_device *dev)
  461. {
  462. struct yam_port *yp = netdev_priv(dev);
  463. skb_queue_tail(&yp->send_queue, skb);
  464. dev->trans_start = jiffies;
  465. return 0;
  466. }
  467. static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
  468. {
  469. if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
  470. yp->tx_count = 1;
  471. else
  472. yp->tx_count = (yp->bitrate * yp->txd) / 8000;
  473. yp->tx_state = TX_HEAD;
  474. ptt_on(dev);
  475. }
  476. static void yam_arbitrate(struct net_device *dev)
  477. {
  478. struct yam_port *yp = netdev_priv(dev);
  479. if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
  480. skb_queue_empty(&yp->send_queue))
  481. return;
  482. /* tx_state is TX_OFF and there is data to send */
  483. if (yp->dupmode) {
  484. /* Full duplex mode, don't wait */
  485. yam_start_tx(dev, yp);
  486. return;
  487. }
  488. if (yp->dcd) {
  489. /* DCD on, wait slotime ... */
  490. yp->slotcnt = yp->slot / 10;
  491. return;
  492. }
  493. /* Is slottime passed ? */
  494. if ((--yp->slotcnt) > 0)
  495. return;
  496. yp->slotcnt = yp->slot / 10;
  497. /* is random > persist ? */
  498. if ((random32() % 256) > yp->pers)
  499. return;
  500. yam_start_tx(dev, yp);
  501. }
  502. static void yam_dotimer(unsigned long dummy)
  503. {
  504. int i;
  505. for (i = 0; i < NR_PORTS; i++) {
  506. struct net_device *dev = yam_devs[i];
  507. if (dev && netif_running(dev))
  508. yam_arbitrate(dev);
  509. }
  510. yam_timer.expires = jiffies + HZ / 100;
  511. add_timer(&yam_timer);
  512. }
  513. static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
  514. {
  515. struct sk_buff *skb;
  516. unsigned char b, temp;
  517. switch (yp->tx_state) {
  518. case TX_OFF:
  519. break;
  520. case TX_HEAD:
  521. if (--yp->tx_count <= 0) {
  522. if (!(skb = skb_dequeue(&yp->send_queue))) {
  523. ptt_off(dev);
  524. yp->tx_state = TX_OFF;
  525. break;
  526. }
  527. yp->tx_state = TX_DATA;
  528. if (skb->data[0] != 0) {
  529. /* do_kiss_params(s, skb->data, skb->len); */
  530. dev_kfree_skb_any(skb);
  531. break;
  532. }
  533. yp->tx_len = skb->len - 1; /* strip KISS byte */
  534. if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
  535. dev_kfree_skb_any(skb);
  536. break;
  537. }
  538. skb_copy_from_linear_data_offset(skb, 1,
  539. yp->tx_buf,
  540. yp->tx_len);
  541. dev_kfree_skb_any(skb);
  542. yp->tx_count = 0;
  543. yp->tx_crcl = 0x21;
  544. yp->tx_crch = 0xf3;
  545. yp->tx_state = TX_DATA;
  546. }
  547. break;
  548. case TX_DATA:
  549. b = yp->tx_buf[yp->tx_count++];
  550. outb(b, THR(dev->base_addr));
  551. temp = yp->tx_crcl;
  552. yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
  553. yp->tx_crch = chktabh[temp] ^ b;
  554. if (yp->tx_count >= yp->tx_len) {
  555. yp->tx_state = TX_CRC1;
  556. }
  557. break;
  558. case TX_CRC1:
  559. yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
  560. yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
  561. outb(yp->tx_crcl, THR(dev->base_addr));
  562. yp->tx_state = TX_CRC2;
  563. break;
  564. case TX_CRC2:
  565. outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
  566. if (skb_queue_empty(&yp->send_queue)) {
  567. yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
  568. if (yp->dupmode == 2)
  569. yp->tx_count += (yp->bitrate * yp->holdd) / 8;
  570. if (yp->tx_count == 0)
  571. yp->tx_count = 1;
  572. yp->tx_state = TX_TAIL;
  573. } else {
  574. yp->tx_count = 1;
  575. yp->tx_state = TX_HEAD;
  576. }
  577. ++yp->stats.tx_packets;
  578. break;
  579. case TX_TAIL:
  580. if (--yp->tx_count <= 0) {
  581. yp->tx_state = TX_OFF;
  582. ptt_off(dev);
  583. }
  584. break;
  585. }
  586. }
  587. /***********************************************************************************
  588. * ISR routine
  589. ************************************************************************************/
  590. static irqreturn_t yam_interrupt(int irq, void *dev_id)
  591. {
  592. struct net_device *dev;
  593. struct yam_port *yp;
  594. unsigned char iir;
  595. int counter = 100;
  596. int i;
  597. int handled = 0;
  598. for (i = 0; i < NR_PORTS; i++) {
  599. dev = yam_devs[i];
  600. yp = netdev_priv(dev);
  601. if (!netif_running(dev))
  602. continue;
  603. while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
  604. unsigned char msr = inb(MSR(dev->base_addr));
  605. unsigned char lsr = inb(LSR(dev->base_addr));
  606. unsigned char rxb;
  607. handled = 1;
  608. if (lsr & LSR_OE)
  609. ++yp->stats.rx_fifo_errors;
  610. yp->dcd = (msr & RX_DCD) ? 1 : 0;
  611. if (--counter <= 0) {
  612. printk(KERN_ERR "%s: too many irq iir=%d\n",
  613. dev->name, iir);
  614. goto out;
  615. }
  616. if (msr & TX_RDY) {
  617. ++yp->nb_mdint;
  618. yam_tx_byte(dev, yp);
  619. }
  620. if (lsr & LSR_RXC) {
  621. ++yp->nb_rxint;
  622. rxb = inb(RBR(dev->base_addr));
  623. if (msr & RX_FLAG)
  624. yam_rx_flag(dev, yp);
  625. else
  626. yam_rx_byte(dev, yp, rxb);
  627. }
  628. }
  629. }
  630. out:
  631. return IRQ_RETVAL(handled);
  632. }
  633. #ifdef CONFIG_PROC_FS
  634. static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
  635. {
  636. return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
  637. }
  638. static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
  639. {
  640. ++*pos;
  641. return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
  642. }
  643. static void yam_seq_stop(struct seq_file *seq, void *v)
  644. {
  645. }
  646. static int yam_seq_show(struct seq_file *seq, void *v)
  647. {
  648. struct net_device *dev = v;
  649. const struct yam_port *yp = netdev_priv(dev);
  650. seq_printf(seq, "Device %s\n", dev->name);
  651. seq_printf(seq, " Up %d\n", netif_running(dev));
  652. seq_printf(seq, " Speed %u\n", yp->bitrate);
  653. seq_printf(seq, " IoBase 0x%x\n", yp->iobase);
  654. seq_printf(seq, " BaudRate %u\n", yp->baudrate);
  655. seq_printf(seq, " IRQ %u\n", yp->irq);
  656. seq_printf(seq, " TxState %u\n", yp->tx_state);
  657. seq_printf(seq, " Duplex %u\n", yp->dupmode);
  658. seq_printf(seq, " HoldDly %u\n", yp->holdd);
  659. seq_printf(seq, " TxDelay %u\n", yp->txd);
  660. seq_printf(seq, " TxTail %u\n", yp->txtail);
  661. seq_printf(seq, " SlotTime %u\n", yp->slot);
  662. seq_printf(seq, " Persist %u\n", yp->pers);
  663. seq_printf(seq, " TxFrames %lu\n", yp->stats.tx_packets);
  664. seq_printf(seq, " RxFrames %lu\n", yp->stats.rx_packets);
  665. seq_printf(seq, " TxInt %u\n", yp->nb_mdint);
  666. seq_printf(seq, " RxInt %u\n", yp->nb_rxint);
  667. seq_printf(seq, " RxOver %lu\n", yp->stats.rx_fifo_errors);
  668. seq_printf(seq, "\n");
  669. return 0;
  670. }
  671. static struct seq_operations yam_seqops = {
  672. .start = yam_seq_start,
  673. .next = yam_seq_next,
  674. .stop = yam_seq_stop,
  675. .show = yam_seq_show,
  676. };
  677. static int yam_info_open(struct inode *inode, struct file *file)
  678. {
  679. return seq_open(file, &yam_seqops);
  680. }
  681. static const struct file_operations yam_info_fops = {
  682. .owner = THIS_MODULE,
  683. .open = yam_info_open,
  684. .read = seq_read,
  685. .llseek = seq_lseek,
  686. .release = seq_release,
  687. };
  688. #endif
  689. /* --------------------------------------------------------------------- */
  690. static struct net_device_stats *yam_get_stats(struct net_device *dev)
  691. {
  692. struct yam_port *yp;
  693. if (!dev)
  694. return NULL;
  695. yp = netdev_priv(dev);
  696. if (yp->magic != YAM_MAGIC)
  697. return NULL;
  698. /*
  699. * Get the current statistics. This may be called with the
  700. * card open or closed.
  701. */
  702. return &yp->stats;
  703. }
  704. /* --------------------------------------------------------------------- */
  705. static int yam_open(struct net_device *dev)
  706. {
  707. struct yam_port *yp = netdev_priv(dev);
  708. enum uart u;
  709. int i;
  710. int ret=0;
  711. printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
  712. if (!dev || !yp->bitrate)
  713. return -ENXIO;
  714. if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
  715. dev->irq < 2 || dev->irq > 15) {
  716. return -ENXIO;
  717. }
  718. if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
  719. {
  720. printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
  721. return -EACCES;
  722. }
  723. if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
  724. printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
  725. ret = -EIO;
  726. goto out_release_base;
  727. }
  728. if (fpga_download(dev->base_addr, yp->bitrate)) {
  729. printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
  730. ret = -EIO;
  731. goto out_release_base;
  732. }
  733. outb(0, IER(dev->base_addr));
  734. if (request_irq(dev->irq, yam_interrupt, IRQF_DISABLED | IRQF_SHARED, dev->name, dev)) {
  735. printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
  736. ret = -EBUSY;
  737. goto out_release_base;
  738. }
  739. yam_set_uart(dev);
  740. netif_start_queue(dev);
  741. yp->slotcnt = yp->slot / 10;
  742. /* Reset overruns for all ports - FPGA programming makes overruns */
  743. for (i = 0; i < NR_PORTS; i++) {
  744. struct net_device *dev = yam_devs[i];
  745. struct yam_port *yp = netdev_priv(dev);
  746. inb(LSR(dev->base_addr));
  747. yp->stats.rx_fifo_errors = 0;
  748. }
  749. printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
  750. uart_str[u]);
  751. return 0;
  752. out_release_base:
  753. release_region(dev->base_addr, YAM_EXTENT);
  754. return ret;
  755. }
  756. /* --------------------------------------------------------------------- */
  757. static int yam_close(struct net_device *dev)
  758. {
  759. struct sk_buff *skb;
  760. struct yam_port *yp = netdev_priv(dev);
  761. if (!dev)
  762. return -EINVAL;
  763. /*
  764. * disable interrupts
  765. */
  766. outb(0, IER(dev->base_addr));
  767. outb(1, MCR(dev->base_addr));
  768. /* Remove IRQ handler if last */
  769. free_irq(dev->irq,dev);
  770. release_region(dev->base_addr, YAM_EXTENT);
  771. netif_stop_queue(dev);
  772. while ((skb = skb_dequeue(&yp->send_queue)))
  773. dev_kfree_skb(skb);
  774. printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
  775. yam_drvname, dev->base_addr, dev->irq);
  776. return 0;
  777. }
  778. /* --------------------------------------------------------------------- */
  779. static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
  780. {
  781. struct yam_port *yp = netdev_priv(dev);
  782. struct yamdrv_ioctl_cfg yi;
  783. struct yamdrv_ioctl_mcs *ym;
  784. int ioctl_cmd;
  785. if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
  786. return -EFAULT;
  787. if (yp->magic != YAM_MAGIC)
  788. return -EINVAL;
  789. if (!capable(CAP_NET_ADMIN))
  790. return -EPERM;
  791. if (cmd != SIOCDEVPRIVATE)
  792. return -EINVAL;
  793. switch (ioctl_cmd) {
  794. case SIOCYAMRESERVED:
  795. return -EINVAL; /* unused */
  796. case SIOCYAMSMCS:
  797. if (netif_running(dev))
  798. return -EINVAL; /* Cannot change this parameter when up */
  799. if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL)
  800. return -ENOBUFS;
  801. ym->bitrate = 9600;
  802. if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) {
  803. kfree(ym);
  804. return -EFAULT;
  805. }
  806. if (ym->bitrate > YAM_MAXBITRATE) {
  807. kfree(ym);
  808. return -EINVAL;
  809. }
  810. add_mcs(ym->bits, ym->bitrate);
  811. kfree(ym);
  812. break;
  813. case SIOCYAMSCFG:
  814. if (!capable(CAP_SYS_RAWIO))
  815. return -EPERM;
  816. if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
  817. return -EFAULT;
  818. if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
  819. return -EINVAL; /* Cannot change this parameter when up */
  820. if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
  821. return -EINVAL; /* Cannot change this parameter when up */
  822. if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
  823. return -EINVAL; /* Cannot change this parameter when up */
  824. if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
  825. return -EINVAL; /* Cannot change this parameter when up */
  826. if (yi.cfg.mask & YAM_IOBASE) {
  827. yp->iobase = yi.cfg.iobase;
  828. dev->base_addr = yi.cfg.iobase;
  829. }
  830. if (yi.cfg.mask & YAM_IRQ) {
  831. if (yi.cfg.irq > 15)
  832. return -EINVAL;
  833. yp->irq = yi.cfg.irq;
  834. dev->irq = yi.cfg.irq;
  835. }
  836. if (yi.cfg.mask & YAM_BITRATE) {
  837. if (yi.cfg.bitrate > YAM_MAXBITRATE)
  838. return -EINVAL;
  839. yp->bitrate = yi.cfg.bitrate;
  840. }
  841. if (yi.cfg.mask & YAM_BAUDRATE) {
  842. if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
  843. return -EINVAL;
  844. yp->baudrate = yi.cfg.baudrate;
  845. }
  846. if (yi.cfg.mask & YAM_MODE) {
  847. if (yi.cfg.mode > YAM_MAXMODE)
  848. return -EINVAL;
  849. yp->dupmode = yi.cfg.mode;
  850. }
  851. if (yi.cfg.mask & YAM_HOLDDLY) {
  852. if (yi.cfg.holddly > YAM_MAXHOLDDLY)
  853. return -EINVAL;
  854. yp->holdd = yi.cfg.holddly;
  855. }
  856. if (yi.cfg.mask & YAM_TXDELAY) {
  857. if (yi.cfg.txdelay > YAM_MAXTXDELAY)
  858. return -EINVAL;
  859. yp->txd = yi.cfg.txdelay;
  860. }
  861. if (yi.cfg.mask & YAM_TXTAIL) {
  862. if (yi.cfg.txtail > YAM_MAXTXTAIL)
  863. return -EINVAL;
  864. yp->txtail = yi.cfg.txtail;
  865. }
  866. if (yi.cfg.mask & YAM_PERSIST) {
  867. if (yi.cfg.persist > YAM_MAXPERSIST)
  868. return -EINVAL;
  869. yp->pers = yi.cfg.persist;
  870. }
  871. if (yi.cfg.mask & YAM_SLOTTIME) {
  872. if (yi.cfg.slottime > YAM_MAXSLOTTIME)
  873. return -EINVAL;
  874. yp->slot = yi.cfg.slottime;
  875. yp->slotcnt = yp->slot / 10;
  876. }
  877. break;
  878. case SIOCYAMGCFG:
  879. yi.cfg.mask = 0xffffffff;
  880. yi.cfg.iobase = yp->iobase;
  881. yi.cfg.irq = yp->irq;
  882. yi.cfg.bitrate = yp->bitrate;
  883. yi.cfg.baudrate = yp->baudrate;
  884. yi.cfg.mode = yp->dupmode;
  885. yi.cfg.txdelay = yp->txd;
  886. yi.cfg.holddly = yp->holdd;
  887. yi.cfg.txtail = yp->txtail;
  888. yi.cfg.persist = yp->pers;
  889. yi.cfg.slottime = yp->slot;
  890. if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
  891. return -EFAULT;
  892. break;
  893. default:
  894. return -EINVAL;
  895. }
  896. return 0;
  897. }
  898. /* --------------------------------------------------------------------- */
  899. static int yam_set_mac_address(struct net_device *dev, void *addr)
  900. {
  901. struct sockaddr *sa = (struct sockaddr *) addr;
  902. /* addr is an AX.25 shifted ASCII mac address */
  903. memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
  904. return 0;
  905. }
  906. /* --------------------------------------------------------------------- */
  907. static void yam_setup(struct net_device *dev)
  908. {
  909. struct yam_port *yp = netdev_priv(dev);
  910. yp->magic = YAM_MAGIC;
  911. yp->bitrate = DEFAULT_BITRATE;
  912. yp->baudrate = DEFAULT_BITRATE * 2;
  913. yp->iobase = 0;
  914. yp->irq = 0;
  915. yp->dupmode = 0;
  916. yp->holdd = DEFAULT_HOLDD;
  917. yp->txd = DEFAULT_TXD;
  918. yp->txtail = DEFAULT_TXTAIL;
  919. yp->slot = DEFAULT_SLOT;
  920. yp->pers = DEFAULT_PERS;
  921. yp->dev = dev;
  922. dev->base_addr = yp->iobase;
  923. dev->irq = yp->irq;
  924. dev->open = yam_open;
  925. dev->stop = yam_close;
  926. dev->do_ioctl = yam_ioctl;
  927. dev->hard_start_xmit = yam_send_packet;
  928. dev->get_stats = yam_get_stats;
  929. skb_queue_head_init(&yp->send_queue);
  930. dev->header_ops = &ax25_header_ops;
  931. dev->set_mac_address = yam_set_mac_address;
  932. dev->type = ARPHRD_AX25;
  933. dev->hard_header_len = AX25_MAX_HEADER_LEN;
  934. dev->mtu = AX25_MTU;
  935. dev->addr_len = AX25_ADDR_LEN;
  936. memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
  937. memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
  938. }
  939. static int __init yam_init_driver(void)
  940. {
  941. struct net_device *dev;
  942. int i, err;
  943. char name[IFNAMSIZ];
  944. printk(yam_drvinfo);
  945. for (i = 0; i < NR_PORTS; i++) {
  946. sprintf(name, "yam%d", i);
  947. dev = alloc_netdev(sizeof(struct yam_port), name,
  948. yam_setup);
  949. if (!dev) {
  950. printk(KERN_ERR "yam: cannot allocate net device %s\n",
  951. dev->name);
  952. err = -ENOMEM;
  953. goto error;
  954. }
  955. err = register_netdev(dev);
  956. if (err) {
  957. printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
  958. goto error;
  959. }
  960. yam_devs[i] = dev;
  961. }
  962. yam_timer.function = yam_dotimer;
  963. yam_timer.expires = jiffies + HZ / 100;
  964. add_timer(&yam_timer);
  965. proc_net_fops_create(&init_net, "yam", S_IRUGO, &yam_info_fops);
  966. return 0;
  967. error:
  968. while (--i >= 0) {
  969. unregister_netdev(yam_devs[i]);
  970. free_netdev(yam_devs[i]);
  971. }
  972. return err;
  973. }
  974. /* --------------------------------------------------------------------- */
  975. static void __exit yam_cleanup_driver(void)
  976. {
  977. struct yam_mcs *p;
  978. int i;
  979. del_timer(&yam_timer);
  980. for (i = 0; i < NR_PORTS; i++) {
  981. struct net_device *dev = yam_devs[i];
  982. if (dev) {
  983. unregister_netdev(dev);
  984. free_netdev(dev);
  985. }
  986. }
  987. while (yam_data) {
  988. p = yam_data;
  989. yam_data = yam_data->next;
  990. kfree(p);
  991. }
  992. proc_net_remove(&init_net, "yam");
  993. }
  994. /* --------------------------------------------------------------------- */
  995. MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
  996. MODULE_DESCRIPTION("Yam amateur radio modem driver");
  997. MODULE_LICENSE("GPL");
  998. module_init(yam_init_driver);
  999. module_exit(yam_cleanup_driver);
  1000. /* --------------------------------------------------------------------- */