sleep.c 4.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170
  1. /*
  2. * sleep.c - x86-specific ACPI sleep support.
  3. *
  4. * Copyright (C) 2001-2003 Patrick Mochel
  5. * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
  6. */
  7. #include <linux/acpi.h>
  8. #include <linux/bootmem.h>
  9. #include <linux/dmi.h>
  10. #include <linux/cpumask.h>
  11. #include "realmode/wakeup.h"
  12. #include "sleep.h"
  13. unsigned long acpi_wakeup_address;
  14. unsigned long acpi_realmode_flags;
  15. /* address in low memory of the wakeup routine. */
  16. static unsigned long acpi_realmode;
  17. #ifdef CONFIG_64BIT
  18. static char temp_stack[10240];
  19. #endif
  20. /* XXX: this macro should move to asm-x86/segment.h and be shared with the
  21. boot code... */
  22. #define GDT_ENTRY(flags, base, limit) \
  23. (((u64)(base & 0xff000000) << 32) | \
  24. ((u64)flags << 40) | \
  25. ((u64)(limit & 0x00ff0000) << 32) | \
  26. ((u64)(base & 0x00ffffff) << 16) | \
  27. ((u64)(limit & 0x0000ffff)))
  28. /**
  29. * acpi_save_state_mem - save kernel state
  30. *
  31. * Create an identity mapped page table and copy the wakeup routine to
  32. * low memory.
  33. *
  34. * Note that this is too late to change acpi_wakeup_address.
  35. */
  36. int acpi_save_state_mem(void)
  37. {
  38. struct wakeup_header *header;
  39. if (!acpi_realmode) {
  40. printk(KERN_ERR "Could not allocate memory during boot, "
  41. "S3 disabled\n");
  42. return -ENOMEM;
  43. }
  44. memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE);
  45. header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET);
  46. if (header->signature != 0x51ee1111) {
  47. printk(KERN_ERR "wakeup header does not match\n");
  48. return -EINVAL;
  49. }
  50. header->video_mode = saved_video_mode;
  51. header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
  52. /*
  53. * Set up the wakeup GDT. We set these up as Big Real Mode,
  54. * that is, with limits set to 4 GB. At least the Lenovo
  55. * Thinkpad X61 is known to need this for the video BIOS
  56. * initialization quirk to work; this is likely to also
  57. * be the case for other laptops or integrated video devices.
  58. */
  59. /* GDT[0]: GDT self-pointer */
  60. header->wakeup_gdt[0] =
  61. (u64)(sizeof(header->wakeup_gdt) - 1) +
  62. ((u64)(acpi_wakeup_address +
  63. ((char *)&header->wakeup_gdt - (char *)acpi_realmode))
  64. << 16);
  65. /* GDT[1]: big real mode-like code segment */
  66. header->wakeup_gdt[1] =
  67. GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
  68. /* GDT[2]: big real mode-like data segment */
  69. header->wakeup_gdt[2] =
  70. GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
  71. #ifndef CONFIG_64BIT
  72. store_gdt((struct desc_ptr *)&header->pmode_gdt);
  73. header->pmode_efer_low = nx_enabled;
  74. if (header->pmode_efer_low & 1) {
  75. /* This is strange, why not save efer, always? */
  76. rdmsr(MSR_EFER, header->pmode_efer_low,
  77. header->pmode_efer_high);
  78. }
  79. #endif /* !CONFIG_64BIT */
  80. header->pmode_cr0 = read_cr0();
  81. header->pmode_cr4 = read_cr4();
  82. header->realmode_flags = acpi_realmode_flags;
  83. header->real_magic = 0x12345678;
  84. #ifndef CONFIG_64BIT
  85. header->pmode_entry = (u32)&wakeup_pmode_return;
  86. header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET);
  87. saved_magic = 0x12345678;
  88. #else /* CONFIG_64BIT */
  89. header->trampoline_segment = setup_trampoline() >> 4;
  90. #ifdef CONFIG_SMP
  91. stack_start.sp = temp_stack + 4096;
  92. #endif
  93. initial_code = (unsigned long)wakeup_long64;
  94. saved_magic = 0x123456789abcdef0;
  95. #endif /* CONFIG_64BIT */
  96. return 0;
  97. }
  98. /*
  99. * acpi_restore_state - undo effects of acpi_save_state_mem
  100. */
  101. void acpi_restore_state_mem(void)
  102. {
  103. }
  104. /**
  105. * acpi_reserve_bootmem - do _very_ early ACPI initialisation
  106. *
  107. * We allocate a page from the first 1MB of memory for the wakeup
  108. * routine for when we come back from a sleep state. The
  109. * runtime allocator allows specification of <16MB pages, but not
  110. * <1MB pages.
  111. */
  112. void __init acpi_reserve_bootmem(void)
  113. {
  114. if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
  115. printk(KERN_ERR
  116. "ACPI: Wakeup code way too big, S3 disabled.\n");
  117. return;
  118. }
  119. acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE);
  120. if (!acpi_realmode) {
  121. printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
  122. return;
  123. }
  124. acpi_wakeup_address = virt_to_phys((void *)acpi_realmode);
  125. }
  126. static int __init acpi_sleep_setup(char *str)
  127. {
  128. while ((str != NULL) && (*str != '\0')) {
  129. if (strncmp(str, "s3_bios", 7) == 0)
  130. acpi_realmode_flags |= 1;
  131. if (strncmp(str, "s3_mode", 7) == 0)
  132. acpi_realmode_flags |= 2;
  133. if (strncmp(str, "s3_beep", 7) == 0)
  134. acpi_realmode_flags |= 4;
  135. if (strncmp(str, "old_ordering", 12) == 0)
  136. acpi_old_suspend_ordering();
  137. str = strchr(str, ',');
  138. if (str != NULL)
  139. str += strspn(str, ", \t");
  140. }
  141. return 1;
  142. }
  143. __setup("acpi_sleep=", acpi_sleep_setup);