lwmon.h 1.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960
  1. /*
  2. * Liebherr LWMON board specific definitions
  3. *
  4. * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
  5. */
  6. #ifndef __MACH_LWMON_H
  7. #define __MACH_LWMON_H
  8. #include <linux/config.h>
  9. #include <asm/ppcboot.h>
  10. #define IMAP_ADDR 0xFFF00000 /* physical base address of IMMR area */
  11. #define IMAP_SIZE (64 * 1024) /* mapped size of IMMR area */
  12. /*-----------------------------------------------------------------------
  13. * PCMCIA stuff
  14. *-----------------------------------------------------------------------
  15. *
  16. */
  17. #define PCMCIA_MEM_SIZE ( 64 << 20 )
  18. #define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */
  19. /*
  20. * Definitions for IDE0 Interface
  21. */
  22. #define IDE0_BASE_OFFSET 0
  23. #define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320)
  24. #define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1)
  25. #define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2)
  26. #define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3)
  27. #define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4)
  28. #define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5)
  29. #define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6)
  30. #define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7)
  31. #define IDE0_CONTROL_REG_OFFSET 0x0106
  32. #define IDE0_IRQ_REG_OFFSET 0x000A /* not used */
  33. #define IDE0_INTERRUPT 13
  34. /*
  35. * Definitions for I2C devices
  36. */
  37. #define I2C_ADDR_AUDIO 0x28 /* Audio volume control */
  38. #define I2C_ADDR_SYSMON 0x2E /* LM87 System Monitor */
  39. #define I2C_ADDR_RTC 0x51 /* PCF8563 RTC */
  40. #define I2C_ADDR_POWER_A 0x52 /* PCMCIA/USB power switch, channel A */
  41. #define I2C_ADDR_POWER_B 0x53 /* PCMCIA/USB power switch, channel B */
  42. #define I2C_ADDR_KEYBD 0x56 /* PIC LWE keyboard */
  43. #define I2C_ADDR_PICIO 0x57 /* PIC IO Expander */
  44. #define I2C_ADDR_EEPROM 0x58 /* EEPROM AT24C164 */
  45. /* We don't use the 8259.
  46. */
  47. #define NR_8259_INTS 0
  48. #endif /* __MACH_LWMON_H */