123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291 |
- /*
- * linux/arch/arm/kernel/entry-common.S
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/config.h>
- #include <asm/unistd.h>
- #include "entry-header.S"
- .align 5
- /*
- * This is the fast syscall return path. We do as little as
- * possible here, and this includes saving r0 back into the SVC
- * stack.
- */
- ret_fast_syscall:
- disable_irq @ disable interrupts
- ldr r1, [tsk, #TI_FLAGS]
- tst r1, #_TIF_WORK_MASK
- bne fast_work_pending
- @ fast_restore_user_regs
- ldr r1, [sp, #S_OFF + S_PSR] @ get calling cpsr
- ldr lr, [sp, #S_OFF + S_PC]! @ get pc
- msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
- mov r0, r0
- add sp, sp, #S_FRAME_SIZE - S_PC
- movs pc, lr @ return & move spsr_svc into cpsr
- /*
- * Ok, we need to do extra processing, enter the slow path.
- */
- fast_work_pending:
- str r0, [sp, #S_R0+S_OFF]! @ returned r0
- work_pending:
- tst r1, #_TIF_NEED_RESCHED
- bne work_resched
- tst r1, #_TIF_NOTIFY_RESUME | _TIF_SIGPENDING
- beq no_work_pending
- mov r0, sp @ 'regs'
- mov r2, why @ 'syscall'
- bl do_notify_resume
- disable_irq @ disable interrupts
- b no_work_pending
- work_resched:
- bl schedule
- /*
- * "slow" syscall return path. "why" tells us if this was a real syscall.
- */
- ENTRY(ret_to_user)
- ret_slow_syscall:
- disable_irq @ disable interrupts
- ldr r1, [tsk, #TI_FLAGS]
- tst r1, #_TIF_WORK_MASK
- bne work_pending
- no_work_pending:
- @ slow_restore_user_regs
- ldr r1, [sp, #S_PSR] @ get calling cpsr
- ldr lr, [sp, #S_PC]! @ get pc
- msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r0 - lr}^ @ get calling r1 - lr
- mov r0, r0
- add sp, sp, #S_FRAME_SIZE - S_PC
- movs pc, lr @ return & move spsr_svc into cpsr
- /*
- * This is how we return from a fork.
- */
- ENTRY(ret_from_fork)
- bl schedule_tail
- get_thread_info tsk
- ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
- mov why, #1
- tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
- beq ret_slow_syscall
- mov r1, sp
- mov r0, #1 @ trace exit [IP = 1]
- bl syscall_trace
- b ret_slow_syscall
-
- #include "calls.S"
- /*=============================================================================
- * SWI handler
- *-----------------------------------------------------------------------------
- */
- /* If we're optimising for StrongARM the resulting code won't
- run on an ARM7 and we can save a couple of instructions.
- --pb */
- #ifdef CONFIG_CPU_ARM710
- .macro arm710_bug_check, instr, temp
- and \temp, \instr, #0x0f000000 @ check for SWI
- teq \temp, #0x0f000000
- bne .Larm700bug
- .endm
- .Larm700bug:
- ldr r0, [sp, #S_PSR] @ Get calling cpsr
- sub lr, lr, #4
- str lr, [r8]
- msr spsr_cxsf, r0
- ldmia sp, {r0 - lr}^ @ Get calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- movs pc, lr
- #else
- .macro arm710_bug_check, instr, temp
- .endm
- #endif
- .align 5
- ENTRY(vector_swi)
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0 - r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling sp, lr
- mrs r8, spsr @ called from non-FIQ mode, so ok.
- str lr, [sp, #S_PC] @ Save calling PC
- str r8, [sp, #S_PSR] @ Save CPSR
- str r0, [sp, #S_OLD_R0] @ Save OLD_R0
- zero_fp
- /*
- * Get the system call number.
- */
- #ifdef CONFIG_ARM_THUMB
- tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
- addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
- ldreq scno, [lr, #-4]
- #else
- ldr scno, [lr, #-4] @ get SWI instruction
- #endif
- arm710_bug_check scno, ip
- #ifdef CONFIG_ALIGNMENT_TRAP
- ldr ip, __cr_alignment
- ldr ip, [ip]
- mcr p15, 0, ip, c1, c0 @ update control register
- #endif
- enable_irq
- str r4, [sp, #-S_OFF]! @ push fifth arg
- get_thread_info tsk
- ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
- bic scno, scno, #0xff000000 @ mask off SWI op-code
- eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
- adr tbl, sys_call_table @ load syscall table pointer
- tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
- bne __sys_trace
- adr lr, ret_fast_syscall @ return address
- cmp scno, #NR_syscalls @ check upper syscall limit
- ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
- add r1, sp, #S_OFF
- 2: mov why, #0 @ no longer a real syscall
- cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
- eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
- bcs arm_syscall
- b sys_ni_syscall @ not private func
- /*
- * This is the really slow path. We're going to be doing
- * context switches, and waiting for our parent to respond.
- */
- __sys_trace:
- add r1, sp, #S_OFF
- mov r0, #0 @ trace entry [IP = 0]
- bl syscall_trace
- adr lr, __sys_trace_return @ return address
- add r1, sp, #S_R0 + S_OFF @ pointer to regs
- cmp scno, #NR_syscalls @ check upper syscall limit
- ldmccia r1, {r0 - r3} @ have to reload r0 - r3
- ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
- b 2b
- __sys_trace_return:
- str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
- mov r1, sp
- mov r0, #1 @ trace exit [IP = 1]
- bl syscall_trace
- b ret_slow_syscall
- .align 5
- #ifdef CONFIG_ALIGNMENT_TRAP
- .type __cr_alignment, #object
- __cr_alignment:
- .word cr_alignment
- #endif
- .type sys_call_table, #object
- ENTRY(sys_call_table)
- #include "calls.S"
- /*============================================================================
- * Special system call wrappers
- */
- @ r0 = syscall number
- @ r5 = syscall table
- .type sys_syscall, #function
- sys_syscall:
- eor scno, r0, #__NR_SYSCALL_BASE
- cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
- cmpne scno, #NR_syscalls @ check range
- stmloia sp, {r5, r6} @ shuffle args
- movlo r0, r1
- movlo r1, r2
- movlo r2, r3
- movlo r3, r4
- ldrlo pc, [tbl, scno, lsl #2]
- b sys_ni_syscall
- sys_fork_wrapper:
- add r0, sp, #S_OFF
- b sys_fork
- sys_vfork_wrapper:
- add r0, sp, #S_OFF
- b sys_vfork
- sys_execve_wrapper:
- add r3, sp, #S_OFF
- b sys_execve
- sys_clone_wrapper:
- add ip, sp, #S_OFF
- str ip, [sp, #4]
- b sys_clone
- sys_sigsuspend_wrapper:
- add r3, sp, #S_OFF
- b sys_sigsuspend
- sys_rt_sigsuspend_wrapper:
- add r2, sp, #S_OFF
- b sys_rt_sigsuspend
- sys_sigreturn_wrapper:
- add r0, sp, #S_OFF
- b sys_sigreturn
- sys_rt_sigreturn_wrapper:
- add r0, sp, #S_OFF
- b sys_rt_sigreturn
- sys_sigaltstack_wrapper:
- ldr r2, [sp, #S_OFF + S_SP]
- b do_sigaltstack
- sys_futex_wrapper:
- str r5, [sp, #4] @ push sixth arg
- b sys_futex
- sys_arm_fadvise64_64_wrapper:
- str r5, [sp, #4] @ push r5 to stack
- b sys_arm_fadvise64_64
- sys_mbind_wrapper:
- str r5, [sp, #4]
- b sys_mbind
- /*
- * Note: off_4k (r5) is always units of 4K. If we can't do the requested
- * offset, we return EINVAL.
- */
- sys_mmap2:
- #if PAGE_SHIFT > 12
- tst r5, #PGOFF_MASK
- moveq r5, r5, lsr #PAGE_SHIFT - 12
- streq r5, [sp, #4]
- beq do_mmap2
- mov r0, #-EINVAL
- RETINSTR(mov,pc, lr)
- #else
- str r5, [sp, #4]
- b do_mmap2
- #endif
|