123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610 |
- /*
- * bios-less APM driver for ARM Linux
- * Jamey Hicks <jamey@crl.dec.com>
- * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
- *
- * APM 1.2 Reference:
- * Intel Corporation, Microsoft Corporation. Advanced Power Management
- * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
- *
- * [This document is available from Microsoft at:
- * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
- */
- #include <linux/config.h>
- #include <linux/module.h>
- #include <linux/poll.h>
- #include <linux/timer.h>
- #include <linux/slab.h>
- #include <linux/proc_fs.h>
- #include <linux/miscdevice.h>
- #include <linux/apm_bios.h>
- #include <linux/sched.h>
- #include <linux/pm.h>
- #include <linux/device.h>
- #include <linux/kernel.h>
- #include <linux/list.h>
- #include <linux/init.h>
- #include <linux/completion.h>
- #include <asm/apm.h> /* apm_power_info */
- #include <asm/system.h>
- /*
- * The apm_bios device is one of the misc char devices.
- * This is its minor number.
- */
- #define APM_MINOR_DEV 134
- /*
- * See Documentation/Config.help for the configuration options.
- *
- * Various options can be changed at boot time as follows:
- * (We allow underscores for compatibility with the modules code)
- * apm=on/off enable/disable APM
- */
- /*
- * Maximum number of events stored
- */
- #define APM_MAX_EVENTS 16
- struct apm_queue {
- unsigned int event_head;
- unsigned int event_tail;
- apm_event_t events[APM_MAX_EVENTS];
- };
- /*
- * The per-file APM data
- */
- struct apm_user {
- struct list_head list;
- unsigned int suser: 1;
- unsigned int writer: 1;
- unsigned int reader: 1;
- int suspend_result;
- unsigned int suspend_state;
- #define SUSPEND_NONE 0 /* no suspend pending */
- #define SUSPEND_PENDING 1 /* suspend pending read */
- #define SUSPEND_READ 2 /* suspend read, pending ack */
- #define SUSPEND_ACKED 3 /* suspend acked */
- #define SUSPEND_DONE 4 /* suspend completed */
- struct apm_queue queue;
- };
- /*
- * Local variables
- */
- static int suspends_pending;
- static int apm_disabled;
- static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
- static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
- /*
- * This is a list of everyone who has opened /dev/apm_bios
- */
- static DECLARE_RWSEM(user_list_lock);
- static LIST_HEAD(apm_user_list);
- /*
- * kapmd info. kapmd provides us a process context to handle
- * "APM" events within - specifically necessary if we're going
- * to be suspending the system.
- */
- static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
- static DECLARE_COMPLETION(kapmd_exit);
- static DEFINE_SPINLOCK(kapmd_queue_lock);
- static struct apm_queue kapmd_queue;
- static const char driver_version[] = "1.13"; /* no spaces */
- /*
- * Compatibility cruft until the IPAQ people move over to the new
- * interface.
- */
- static void __apm_get_power_status(struct apm_power_info *info)
- {
- }
- /*
- * This allows machines to provide their own "apm get power status" function.
- */
- void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
- EXPORT_SYMBOL(apm_get_power_status);
- /*
- * APM event queue management.
- */
- static inline int queue_empty(struct apm_queue *q)
- {
- return q->event_head == q->event_tail;
- }
- static inline apm_event_t queue_get_event(struct apm_queue *q)
- {
- q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
- return q->events[q->event_tail];
- }
- static void queue_add_event(struct apm_queue *q, apm_event_t event)
- {
- q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
- if (q->event_head == q->event_tail) {
- static int notified;
- if (notified++ == 0)
- printk(KERN_ERR "apm: an event queue overflowed\n");
- q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
- }
- q->events[q->event_head] = event;
- }
- static void queue_event_one_user(struct apm_user *as, apm_event_t event)
- {
- if (as->suser && as->writer) {
- switch (event) {
- case APM_SYS_SUSPEND:
- case APM_USER_SUSPEND:
- /*
- * If this user already has a suspend pending,
- * don't queue another one.
- */
- if (as->suspend_state != SUSPEND_NONE)
- return;
- as->suspend_state = SUSPEND_PENDING;
- suspends_pending++;
- break;
- }
- }
- queue_add_event(&as->queue, event);
- }
- static void queue_event(apm_event_t event, struct apm_user *sender)
- {
- struct apm_user *as;
- down_read(&user_list_lock);
- list_for_each_entry(as, &apm_user_list, list) {
- if (as != sender && as->reader)
- queue_event_one_user(as, event);
- }
- up_read(&user_list_lock);
- wake_up_interruptible(&apm_waitqueue);
- }
- static void apm_suspend(void)
- {
- struct apm_user *as;
- int err = pm_suspend(PM_SUSPEND_MEM);
- /*
- * Anyone on the APM queues will think we're still suspended.
- * Send a message so everyone knows we're now awake again.
- */
- queue_event(APM_NORMAL_RESUME, NULL);
- /*
- * Finally, wake up anyone who is sleeping on the suspend.
- */
- down_read(&user_list_lock);
- list_for_each_entry(as, &apm_user_list, list) {
- as->suspend_result = err;
- as->suspend_state = SUSPEND_DONE;
- }
- up_read(&user_list_lock);
- wake_up(&apm_suspend_waitqueue);
- }
- static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
- {
- struct apm_user *as = fp->private_data;
- apm_event_t event;
- int i = count, ret = 0;
- if (count < sizeof(apm_event_t))
- return -EINVAL;
- if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
- while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
- event = queue_get_event(&as->queue);
- ret = -EFAULT;
- if (copy_to_user(buf, &event, sizeof(event)))
- break;
- if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
- as->suspend_state = SUSPEND_READ;
- buf += sizeof(event);
- i -= sizeof(event);
- }
- if (i < count)
- ret = count - i;
- return ret;
- }
- static unsigned int apm_poll(struct file *fp, poll_table * wait)
- {
- struct apm_user *as = fp->private_data;
- poll_wait(fp, &apm_waitqueue, wait);
- return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
- }
- /*
- * apm_ioctl - handle APM ioctl
- *
- * APM_IOC_SUSPEND
- * This IOCTL is overloaded, and performs two functions. It is used to:
- * - initiate a suspend
- * - acknowledge a suspend read from /dev/apm_bios.
- * Only when everyone who has opened /dev/apm_bios with write permission
- * has acknowledge does the actual suspend happen.
- */
- static int
- apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
- {
- struct apm_user *as = filp->private_data;
- unsigned long flags;
- int err = -EINVAL;
- if (!as->suser || !as->writer)
- return -EPERM;
- switch (cmd) {
- case APM_IOC_SUSPEND:
- as->suspend_result = -EINTR;
- if (as->suspend_state == SUSPEND_READ) {
- /*
- * If we read a suspend command from /dev/apm_bios,
- * then the corresponding APM_IOC_SUSPEND ioctl is
- * interpreted as an acknowledge.
- */
- as->suspend_state = SUSPEND_ACKED;
- suspends_pending--;
- } else {
- /*
- * Otherwise it is a request to suspend the system.
- * Queue an event for all readers, and expect an
- * acknowledge from all writers who haven't already
- * acknowledged.
- */
- queue_event(APM_USER_SUSPEND, as);
- }
- /*
- * If there are no further acknowledges required, suspend
- * the system.
- */
- if (suspends_pending == 0)
- apm_suspend();
- /*
- * Wait for the suspend/resume to complete. If there are
- * pending acknowledges, we wait here for them.
- *
- * Note that we need to ensure that the PM subsystem does
- * not kick us out of the wait when it suspends the threads.
- */
- flags = current->flags;
- current->flags |= PF_NOFREEZE;
- /*
- * Note: do not allow a thread which is acking the suspend
- * to escape until the resume is complete.
- */
- if (as->suspend_state == SUSPEND_ACKED)
- wait_event(apm_suspend_waitqueue,
- as->suspend_state == SUSPEND_DONE);
- else
- wait_event_interruptible(apm_suspend_waitqueue,
- as->suspend_state == SUSPEND_DONE);
- current->flags = flags;
- err = as->suspend_result;
- as->suspend_state = SUSPEND_NONE;
- break;
- }
- return err;
- }
- static int apm_release(struct inode * inode, struct file * filp)
- {
- struct apm_user *as = filp->private_data;
- filp->private_data = NULL;
- down_write(&user_list_lock);
- list_del(&as->list);
- up_write(&user_list_lock);
- /*
- * We are now unhooked from the chain. As far as new
- * events are concerned, we no longer exist. However, we
- * need to balance suspends_pending, which means the
- * possibility of sleeping.
- */
- if (as->suspend_state != SUSPEND_NONE) {
- suspends_pending -= 1;
- if (suspends_pending == 0)
- apm_suspend();
- }
- kfree(as);
- return 0;
- }
- static int apm_open(struct inode * inode, struct file * filp)
- {
- struct apm_user *as;
- as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
- if (as) {
- memset(as, 0, sizeof(*as));
- /*
- * XXX - this is a tiny bit broken, when we consider BSD
- * process accounting. If the device is opened by root, we
- * instantly flag that we used superuser privs. Who knows,
- * we might close the device immediately without doing a
- * privileged operation -- cevans
- */
- as->suser = capable(CAP_SYS_ADMIN);
- as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
- as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
- down_write(&user_list_lock);
- list_add(&as->list, &apm_user_list);
- up_write(&user_list_lock);
- filp->private_data = as;
- }
- return as ? 0 : -ENOMEM;
- }
- static struct file_operations apm_bios_fops = {
- .owner = THIS_MODULE,
- .read = apm_read,
- .poll = apm_poll,
- .ioctl = apm_ioctl,
- .open = apm_open,
- .release = apm_release,
- };
- static struct miscdevice apm_device = {
- .minor = APM_MINOR_DEV,
- .name = "apm_bios",
- .fops = &apm_bios_fops
- };
- #ifdef CONFIG_PROC_FS
- /*
- * Arguments, with symbols from linux/apm_bios.h.
- *
- * 0) Linux driver version (this will change if format changes)
- * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
- * 2) APM flags from APM Installation Check (0x00):
- * bit 0: APM_16_BIT_SUPPORT
- * bit 1: APM_32_BIT_SUPPORT
- * bit 2: APM_IDLE_SLOWS_CLOCK
- * bit 3: APM_BIOS_DISABLED
- * bit 4: APM_BIOS_DISENGAGED
- * 3) AC line status
- * 0x00: Off-line
- * 0x01: On-line
- * 0x02: On backup power (BIOS >= 1.1 only)
- * 0xff: Unknown
- * 4) Battery status
- * 0x00: High
- * 0x01: Low
- * 0x02: Critical
- * 0x03: Charging
- * 0x04: Selected battery not present (BIOS >= 1.2 only)
- * 0xff: Unknown
- * 5) Battery flag
- * bit 0: High
- * bit 1: Low
- * bit 2: Critical
- * bit 3: Charging
- * bit 7: No system battery
- * 0xff: Unknown
- * 6) Remaining battery life (percentage of charge):
- * 0-100: valid
- * -1: Unknown
- * 7) Remaining battery life (time units):
- * Number of remaining minutes or seconds
- * -1: Unknown
- * 8) min = minutes; sec = seconds
- */
- static int apm_get_info(char *buf, char **start, off_t fpos, int length)
- {
- struct apm_power_info info;
- char *units;
- int ret;
- info.ac_line_status = 0xff;
- info.battery_status = 0xff;
- info.battery_flag = 0xff;
- info.battery_life = -1;
- info.time = -1;
- info.units = -1;
- if (apm_get_power_status)
- apm_get_power_status(&info);
- switch (info.units) {
- default: units = "?"; break;
- case 0: units = "min"; break;
- case 1: units = "sec"; break;
- }
- ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
- driver_version, APM_32_BIT_SUPPORT,
- info.ac_line_status, info.battery_status,
- info.battery_flag, info.battery_life,
- info.time, units);
- return ret;
- }
- #endif
- static int kapmd(void *arg)
- {
- daemonize("kapmd");
- current->flags |= PF_NOFREEZE;
- do {
- apm_event_t event;
- wait_event_interruptible(kapmd_wait,
- !queue_empty(&kapmd_queue) || !pm_active);
- if (!pm_active)
- break;
- spin_lock_irq(&kapmd_queue_lock);
- event = 0;
- if (!queue_empty(&kapmd_queue))
- event = queue_get_event(&kapmd_queue);
- spin_unlock_irq(&kapmd_queue_lock);
- switch (event) {
- case 0:
- break;
- case APM_LOW_BATTERY:
- case APM_POWER_STATUS_CHANGE:
- queue_event(event, NULL);
- break;
- case APM_USER_SUSPEND:
- case APM_SYS_SUSPEND:
- queue_event(event, NULL);
- if (suspends_pending == 0)
- apm_suspend();
- break;
- case APM_CRITICAL_SUSPEND:
- apm_suspend();
- break;
- }
- } while (1);
- complete_and_exit(&kapmd_exit, 0);
- }
- static int __init apm_init(void)
- {
- int ret;
- if (apm_disabled) {
- printk(KERN_NOTICE "apm: disabled on user request.\n");
- return -ENODEV;
- }
- if (PM_IS_ACTIVE()) {
- printk(KERN_NOTICE "apm: overridden by ACPI.\n");
- return -EINVAL;
- }
- pm_active = 1;
- ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
- if (ret < 0) {
- pm_active = 0;
- return ret;
- }
- #ifdef CONFIG_PROC_FS
- create_proc_info_entry("apm", 0, NULL, apm_get_info);
- #endif
- ret = misc_register(&apm_device);
- if (ret != 0) {
- remove_proc_entry("apm", NULL);
- pm_active = 0;
- wake_up(&kapmd_wait);
- wait_for_completion(&kapmd_exit);
- }
- return ret;
- }
- static void __exit apm_exit(void)
- {
- misc_deregister(&apm_device);
- remove_proc_entry("apm", NULL);
- pm_active = 0;
- wake_up(&kapmd_wait);
- wait_for_completion(&kapmd_exit);
- }
- module_init(apm_init);
- module_exit(apm_exit);
- MODULE_AUTHOR("Stephen Rothwell");
- MODULE_DESCRIPTION("Advanced Power Management");
- MODULE_LICENSE("GPL");
- #ifndef MODULE
- static int __init apm_setup(char *str)
- {
- while ((str != NULL) && (*str != '\0')) {
- if (strncmp(str, "off", 3) == 0)
- apm_disabled = 1;
- if (strncmp(str, "on", 2) == 0)
- apm_disabled = 0;
- str = strchr(str, ',');
- if (str != NULL)
- str += strspn(str, ", \t");
- }
- return 1;
- }
- __setup("apm=", apm_setup);
- #endif
- /**
- * apm_queue_event - queue an APM event for kapmd
- * @event: APM event
- *
- * Queue an APM event for kapmd to process and ultimately take the
- * appropriate action. Only a subset of events are handled:
- * %APM_LOW_BATTERY
- * %APM_POWER_STATUS_CHANGE
- * %APM_USER_SUSPEND
- * %APM_SYS_SUSPEND
- * %APM_CRITICAL_SUSPEND
- */
- void apm_queue_event(apm_event_t event)
- {
- unsigned long flags;
- spin_lock_irqsave(&kapmd_queue_lock, flags);
- queue_add_event(&kapmd_queue, event);
- spin_unlock_irqrestore(&kapmd_queue_lock, flags);
- wake_up_interruptible(&kapmd_wait);
- }
- EXPORT_SYMBOL(apm_queue_event);
|