acpi.c 24 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989
  1. /*
  2. * acpi.c - Architecture-Specific Low-Level ACPI Support
  3. *
  4. * Copyright (C) 1999 VA Linux Systems
  5. * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
  6. * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
  7. * David Mosberger-Tang <davidm@hpl.hp.com>
  8. * Copyright (C) 2000 Intel Corp.
  9. * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
  10. * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  11. * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com>
  12. * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com>
  13. * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de>
  14. * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com>
  15. *
  16. * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  17. *
  18. * This program is free software; you can redistribute it and/or modify
  19. * it under the terms of the GNU General Public License as published by
  20. * the Free Software Foundation; either version 2 of the License, or
  21. * (at your option) any later version.
  22. *
  23. * This program is distributed in the hope that it will be useful,
  24. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  25. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  26. * GNU General Public License for more details.
  27. *
  28. * You should have received a copy of the GNU General Public License
  29. * along with this program; if not, write to the Free Software
  30. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  31. *
  32. * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  33. */
  34. #include <linux/config.h>
  35. #include <linux/module.h>
  36. #include <linux/init.h>
  37. #include <linux/kernel.h>
  38. #include <linux/sched.h>
  39. #include <linux/smp.h>
  40. #include <linux/string.h>
  41. #include <linux/types.h>
  42. #include <linux/irq.h>
  43. #include <linux/acpi.h>
  44. #include <linux/efi.h>
  45. #include <linux/mmzone.h>
  46. #include <linux/nodemask.h>
  47. #include <asm/io.h>
  48. #include <asm/iosapic.h>
  49. #include <asm/machvec.h>
  50. #include <asm/page.h>
  51. #include <asm/system.h>
  52. #include <asm/numa.h>
  53. #include <asm/sal.h>
  54. #include <asm/cyclone.h>
  55. #define BAD_MADT_ENTRY(entry, end) ( \
  56. (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
  57. ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
  58. #define PREFIX "ACPI: "
  59. void (*pm_idle) (void);
  60. EXPORT_SYMBOL(pm_idle);
  61. void (*pm_power_off) (void);
  62. EXPORT_SYMBOL(pm_power_off);
  63. unsigned char acpi_kbd_controller_present = 1;
  64. unsigned char acpi_legacy_devices;
  65. static unsigned int __initdata acpi_madt_rev;
  66. unsigned int acpi_cpei_override;
  67. unsigned int acpi_cpei_phys_cpuid;
  68. #define MAX_SAPICS 256
  69. u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 };
  70. EXPORT_SYMBOL(ia64_acpiid_to_sapicid);
  71. const char *acpi_get_sysname(void)
  72. {
  73. #ifdef CONFIG_IA64_GENERIC
  74. unsigned long rsdp_phys;
  75. struct acpi20_table_rsdp *rsdp;
  76. struct acpi_table_xsdt *xsdt;
  77. struct acpi_table_header *hdr;
  78. rsdp_phys = acpi_find_rsdp();
  79. if (!rsdp_phys) {
  80. printk(KERN_ERR
  81. "ACPI 2.0 RSDP not found, default to \"dig\"\n");
  82. return "dig";
  83. }
  84. rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys);
  85. if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) {
  86. printk(KERN_ERR
  87. "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
  88. return "dig";
  89. }
  90. xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address);
  91. hdr = &xsdt->header;
  92. if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) {
  93. printk(KERN_ERR
  94. "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
  95. return "dig";
  96. }
  97. if (!strcmp(hdr->oem_id, "HP")) {
  98. return "hpzx1";
  99. } else if (!strcmp(hdr->oem_id, "SGI")) {
  100. return "sn2";
  101. }
  102. return "dig";
  103. #else
  104. # if defined (CONFIG_IA64_HP_SIM)
  105. return "hpsim";
  106. # elif defined (CONFIG_IA64_HP_ZX1)
  107. return "hpzx1";
  108. # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
  109. return "hpzx1_swiotlb";
  110. # elif defined (CONFIG_IA64_SGI_SN2)
  111. return "sn2";
  112. # elif defined (CONFIG_IA64_DIG)
  113. return "dig";
  114. # else
  115. # error Unknown platform. Fix acpi.c.
  116. # endif
  117. #endif
  118. }
  119. #ifdef CONFIG_ACPI
  120. #define ACPI_MAX_PLATFORM_INTERRUPTS 256
  121. /* Array to record platform interrupt vectors for generic interrupt routing. */
  122. int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = {
  123. [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1
  124. };
  125. enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC;
  126. /*
  127. * Interrupt routing API for device drivers. Provides interrupt vector for
  128. * a generic platform event. Currently only CPEI is implemented.
  129. */
  130. int acpi_request_vector(u32 int_type)
  131. {
  132. int vector = -1;
  133. if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) {
  134. /* corrected platform error interrupt */
  135. vector = platform_intr_list[int_type];
  136. } else
  137. printk(KERN_ERR
  138. "acpi_request_vector(): invalid interrupt type\n");
  139. return vector;
  140. }
  141. char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
  142. {
  143. return __va(phys_addr);
  144. }
  145. /* --------------------------------------------------------------------------
  146. Boot-time Table Parsing
  147. -------------------------------------------------------------------------- */
  148. static int total_cpus __initdata;
  149. static int available_cpus __initdata;
  150. struct acpi_table_madt *acpi_madt __initdata;
  151. static u8 has_8259;
  152. static int __init
  153. acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header,
  154. const unsigned long end)
  155. {
  156. struct acpi_table_lapic_addr_ovr *lapic;
  157. lapic = (struct acpi_table_lapic_addr_ovr *)header;
  158. if (BAD_MADT_ENTRY(lapic, end))
  159. return -EINVAL;
  160. if (lapic->address) {
  161. iounmap(ipi_base_addr);
  162. ipi_base_addr = ioremap(lapic->address, 0);
  163. }
  164. return 0;
  165. }
  166. static int __init
  167. acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end)
  168. {
  169. struct acpi_table_lsapic *lsapic;
  170. lsapic = (struct acpi_table_lsapic *)header;
  171. if (BAD_MADT_ENTRY(lsapic, end))
  172. return -EINVAL;
  173. if (lsapic->flags.enabled) {
  174. #ifdef CONFIG_SMP
  175. smp_boot_data.cpu_phys_id[available_cpus] =
  176. (lsapic->id << 8) | lsapic->eid;
  177. #endif
  178. ia64_acpiid_to_sapicid[lsapic->acpi_id] =
  179. (lsapic->id << 8) | lsapic->eid;
  180. ++available_cpus;
  181. }
  182. total_cpus++;
  183. return 0;
  184. }
  185. static int __init
  186. acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end)
  187. {
  188. struct acpi_table_lapic_nmi *lacpi_nmi;
  189. lacpi_nmi = (struct acpi_table_lapic_nmi *)header;
  190. if (BAD_MADT_ENTRY(lacpi_nmi, end))
  191. return -EINVAL;
  192. /* TBD: Support lapic_nmi entries */
  193. return 0;
  194. }
  195. static int __init
  196. acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end)
  197. {
  198. struct acpi_table_iosapic *iosapic;
  199. iosapic = (struct acpi_table_iosapic *)header;
  200. if (BAD_MADT_ENTRY(iosapic, end))
  201. return -EINVAL;
  202. return iosapic_init(iosapic->address, iosapic->global_irq_base);
  203. }
  204. static int __init
  205. acpi_parse_plat_int_src(acpi_table_entry_header * header,
  206. const unsigned long end)
  207. {
  208. struct acpi_table_plat_int_src *plintsrc;
  209. int vector;
  210. plintsrc = (struct acpi_table_plat_int_src *)header;
  211. if (BAD_MADT_ENTRY(plintsrc, end))
  212. return -EINVAL;
  213. /*
  214. * Get vector assignment for this interrupt, set attributes,
  215. * and program the IOSAPIC routing table.
  216. */
  217. vector = iosapic_register_platform_intr(plintsrc->type,
  218. plintsrc->global_irq,
  219. plintsrc->iosapic_vector,
  220. plintsrc->eid,
  221. plintsrc->id,
  222. (plintsrc->flags.polarity ==
  223. 1) ? IOSAPIC_POL_HIGH :
  224. IOSAPIC_POL_LOW,
  225. (plintsrc->flags.trigger ==
  226. 1) ? IOSAPIC_EDGE :
  227. IOSAPIC_LEVEL);
  228. platform_intr_list[plintsrc->type] = vector;
  229. if (acpi_madt_rev > 1) {
  230. acpi_cpei_override = plintsrc->plint_flags.cpei_override_flag;
  231. }
  232. /*
  233. * Save the physical id, so we can check when its being removed
  234. */
  235. acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff;
  236. return 0;
  237. }
  238. #ifdef CONFIG_HOTPLUG_CPU
  239. unsigned int can_cpei_retarget(void)
  240. {
  241. extern int cpe_vector;
  242. extern unsigned int force_cpei_retarget;
  243. /*
  244. * Only if CPEI is supported and the override flag
  245. * is present, otherwise return that its re-targettable
  246. * if we are in polling mode.
  247. */
  248. if (cpe_vector > 0) {
  249. if (acpi_cpei_override || force_cpei_retarget)
  250. return 1;
  251. else
  252. return 0;
  253. }
  254. return 1;
  255. }
  256. unsigned int is_cpu_cpei_target(unsigned int cpu)
  257. {
  258. unsigned int logical_id;
  259. logical_id = cpu_logical_id(acpi_cpei_phys_cpuid);
  260. if (logical_id == cpu)
  261. return 1;
  262. else
  263. return 0;
  264. }
  265. void set_cpei_target_cpu(unsigned int cpu)
  266. {
  267. acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
  268. }
  269. #endif
  270. unsigned int get_cpei_target_cpu(void)
  271. {
  272. return acpi_cpei_phys_cpuid;
  273. }
  274. static int __init
  275. acpi_parse_int_src_ovr(acpi_table_entry_header * header,
  276. const unsigned long end)
  277. {
  278. struct acpi_table_int_src_ovr *p;
  279. p = (struct acpi_table_int_src_ovr *)header;
  280. if (BAD_MADT_ENTRY(p, end))
  281. return -EINVAL;
  282. iosapic_override_isa_irq(p->bus_irq, p->global_irq,
  283. (p->flags.polarity ==
  284. 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
  285. (p->flags.trigger ==
  286. 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
  287. return 0;
  288. }
  289. static int __init
  290. acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end)
  291. {
  292. struct acpi_table_nmi_src *nmi_src;
  293. nmi_src = (struct acpi_table_nmi_src *)header;
  294. if (BAD_MADT_ENTRY(nmi_src, end))
  295. return -EINVAL;
  296. /* TBD: Support nimsrc entries */
  297. return 0;
  298. }
  299. static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
  300. {
  301. if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) {
  302. /*
  303. * Unfortunately ITC_DRIFT is not yet part of the
  304. * official SAL spec, so the ITC_DRIFT bit is not
  305. * set by the BIOS on this hardware.
  306. */
  307. sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT;
  308. cyclone_setup();
  309. }
  310. }
  311. static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
  312. {
  313. if (!phys_addr || !size)
  314. return -EINVAL;
  315. acpi_madt = (struct acpi_table_madt *)__va(phys_addr);
  316. acpi_madt_rev = acpi_madt->header.revision;
  317. /* remember the value for reference after free_initmem() */
  318. #ifdef CONFIG_ITANIUM
  319. has_8259 = 1; /* Firmware on old Itanium systems is broken */
  320. #else
  321. has_8259 = acpi_madt->flags.pcat_compat;
  322. #endif
  323. iosapic_system_init(has_8259);
  324. /* Get base address of IPI Message Block */
  325. if (acpi_madt->lapic_address)
  326. ipi_base_addr = ioremap(acpi_madt->lapic_address, 0);
  327. printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
  328. acpi_madt_oem_check(acpi_madt->header.oem_id,
  329. acpi_madt->header.oem_table_id);
  330. return 0;
  331. }
  332. #ifdef CONFIG_ACPI_NUMA
  333. #undef SLIT_DEBUG
  334. #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
  335. static int __initdata srat_num_cpus; /* number of cpus */
  336. static u32 __devinitdata pxm_flag[PXM_FLAG_LEN];
  337. #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag))
  338. #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag))
  339. /* maps to convert between proximity domain and logical node ID */
  340. int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
  341. int __initdata nid_to_pxm_map[MAX_NUMNODES];
  342. static struct acpi_table_slit __initdata *slit_table;
  343. /*
  344. * ACPI 2.0 SLIT (System Locality Information Table)
  345. * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
  346. */
  347. void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
  348. {
  349. u32 len;
  350. len = sizeof(struct acpi_table_header) + 8
  351. + slit->localities * slit->localities;
  352. if (slit->header.length != len) {
  353. printk(KERN_ERR
  354. "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
  355. len, slit->header.length);
  356. memset(numa_slit, 10, sizeof(numa_slit));
  357. return;
  358. }
  359. slit_table = slit;
  360. }
  361. void __init
  362. acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
  363. {
  364. if (!pa->flags.enabled)
  365. return;
  366. /* record this node in proximity bitmap */
  367. pxm_bit_set(pa->proximity_domain);
  368. node_cpuid[srat_num_cpus].phys_id =
  369. (pa->apic_id << 8) | (pa->lsapic_eid);
  370. /* nid should be overridden as logical node id later */
  371. node_cpuid[srat_num_cpus].nid = pa->proximity_domain;
  372. srat_num_cpus++;
  373. }
  374. void __init
  375. acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
  376. {
  377. unsigned long paddr, size;
  378. u8 pxm;
  379. struct node_memblk_s *p, *q, *pend;
  380. pxm = ma->proximity_domain;
  381. /* fill node memory chunk structure */
  382. paddr = ma->base_addr_hi;
  383. paddr = (paddr << 32) | ma->base_addr_lo;
  384. size = ma->length_hi;
  385. size = (size << 32) | ma->length_lo;
  386. /* Ignore disabled entries */
  387. if (!ma->flags.enabled)
  388. return;
  389. /* record this node in proximity bitmap */
  390. pxm_bit_set(pxm);
  391. /* Insertion sort based on base address */
  392. pend = &node_memblk[num_node_memblks];
  393. for (p = &node_memblk[0]; p < pend; p++) {
  394. if (paddr < p->start_paddr)
  395. break;
  396. }
  397. if (p < pend) {
  398. for (q = pend - 1; q >= p; q--)
  399. *(q + 1) = *q;
  400. }
  401. p->start_paddr = paddr;
  402. p->size = size;
  403. p->nid = pxm;
  404. num_node_memblks++;
  405. }
  406. void __init acpi_numa_arch_fixup(void)
  407. {
  408. int i, j, node_from, node_to;
  409. /* If there's no SRAT, fix the phys_id and mark node 0 online */
  410. if (srat_num_cpus == 0) {
  411. node_set_online(0);
  412. node_cpuid[0].phys_id = hard_smp_processor_id();
  413. return;
  414. }
  415. /*
  416. * MCD - This can probably be dropped now. No need for pxm ID to node ID
  417. * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
  418. */
  419. /* calculate total number of nodes in system from PXM bitmap */
  420. memset(pxm_to_nid_map, -1, sizeof(pxm_to_nid_map));
  421. memset(nid_to_pxm_map, -1, sizeof(nid_to_pxm_map));
  422. nodes_clear(node_online_map);
  423. for (i = 0; i < MAX_PXM_DOMAINS; i++) {
  424. if (pxm_bit_test(i)) {
  425. int nid = num_online_nodes();
  426. pxm_to_nid_map[i] = nid;
  427. nid_to_pxm_map[nid] = i;
  428. node_set_online(nid);
  429. }
  430. }
  431. /* set logical node id in memory chunk structure */
  432. for (i = 0; i < num_node_memblks; i++)
  433. node_memblk[i].nid = pxm_to_nid_map[node_memblk[i].nid];
  434. /* assign memory bank numbers for each chunk on each node */
  435. for_each_online_node(i) {
  436. int bank;
  437. bank = 0;
  438. for (j = 0; j < num_node_memblks; j++)
  439. if (node_memblk[j].nid == i)
  440. node_memblk[j].bank = bank++;
  441. }
  442. /* set logical node id in cpu structure */
  443. for (i = 0; i < srat_num_cpus; i++)
  444. node_cpuid[i].nid = pxm_to_nid_map[node_cpuid[i].nid];
  445. printk(KERN_INFO "Number of logical nodes in system = %d\n",
  446. num_online_nodes());
  447. printk(KERN_INFO "Number of memory chunks in system = %d\n",
  448. num_node_memblks);
  449. if (!slit_table)
  450. return;
  451. memset(numa_slit, -1, sizeof(numa_slit));
  452. for (i = 0; i < slit_table->localities; i++) {
  453. if (!pxm_bit_test(i))
  454. continue;
  455. node_from = pxm_to_nid_map[i];
  456. for (j = 0; j < slit_table->localities; j++) {
  457. if (!pxm_bit_test(j))
  458. continue;
  459. node_to = pxm_to_nid_map[j];
  460. node_distance(node_from, node_to) =
  461. slit_table->entry[i * slit_table->localities + j];
  462. }
  463. }
  464. #ifdef SLIT_DEBUG
  465. printk("ACPI 2.0 SLIT locality table:\n");
  466. for_each_online_node(i) {
  467. for_each_online_node(j)
  468. printk("%03d ", node_distance(i, j));
  469. printk("\n");
  470. }
  471. #endif
  472. }
  473. #endif /* CONFIG_ACPI_NUMA */
  474. /*
  475. * success: return IRQ number (>=0)
  476. * failure: return < 0
  477. */
  478. int acpi_register_gsi(u32 gsi, int triggering, int polarity)
  479. {
  480. if (has_8259 && gsi < 16)
  481. return isa_irq_to_vector(gsi);
  482. return iosapic_register_intr(gsi,
  483. (polarity ==
  484. ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
  485. IOSAPIC_POL_LOW,
  486. (triggering ==
  487. ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
  488. IOSAPIC_LEVEL);
  489. }
  490. EXPORT_SYMBOL(acpi_register_gsi);
  491. void acpi_unregister_gsi(u32 gsi)
  492. {
  493. iosapic_unregister_intr(gsi);
  494. }
  495. EXPORT_SYMBOL(acpi_unregister_gsi);
  496. static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size)
  497. {
  498. struct acpi_table_header *fadt_header;
  499. struct fadt_descriptor_rev2 *fadt;
  500. if (!phys_addr || !size)
  501. return -EINVAL;
  502. fadt_header = (struct acpi_table_header *)__va(phys_addr);
  503. if (fadt_header->revision != 3)
  504. return -ENODEV; /* Only deal with ACPI 2.0 FADT */
  505. fadt = (struct fadt_descriptor_rev2 *)fadt_header;
  506. if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER))
  507. acpi_kbd_controller_present = 0;
  508. if (fadt->iapc_boot_arch & BAF_LEGACY_DEVICES)
  509. acpi_legacy_devices = 1;
  510. acpi_register_gsi(fadt->sci_int, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
  511. return 0;
  512. }
  513. unsigned long __init acpi_find_rsdp(void)
  514. {
  515. unsigned long rsdp_phys = 0;
  516. if (efi.acpi20)
  517. rsdp_phys = __pa(efi.acpi20);
  518. else if (efi.acpi)
  519. printk(KERN_WARNING PREFIX
  520. "v1.0/r0.71 tables no longer supported\n");
  521. return rsdp_phys;
  522. }
  523. int __init acpi_boot_init(void)
  524. {
  525. /*
  526. * MADT
  527. * ----
  528. * Parse the Multiple APIC Description Table (MADT), if exists.
  529. * Note that this table provides platform SMP configuration
  530. * information -- the successor to MPS tables.
  531. */
  532. if (acpi_table_parse(ACPI_APIC, acpi_parse_madt) < 1) {
  533. printk(KERN_ERR PREFIX "Can't find MADT\n");
  534. goto skip_madt;
  535. }
  536. /* Local APIC */
  537. if (acpi_table_parse_madt
  538. (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0)
  539. printk(KERN_ERR PREFIX
  540. "Error parsing LAPIC address override entry\n");
  541. if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS)
  542. < 1)
  543. printk(KERN_ERR PREFIX
  544. "Error parsing MADT - no LAPIC entries\n");
  545. if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0)
  546. < 0)
  547. printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
  548. /* I/O APIC */
  549. if (acpi_table_parse_madt
  550. (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1)
  551. printk(KERN_ERR PREFIX
  552. "Error parsing MADT - no IOSAPIC entries\n");
  553. /* System-Level Interrupt Routing */
  554. if (acpi_table_parse_madt
  555. (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src,
  556. ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
  557. printk(KERN_ERR PREFIX
  558. "Error parsing platform interrupt source entry\n");
  559. if (acpi_table_parse_madt
  560. (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0)
  561. printk(KERN_ERR PREFIX
  562. "Error parsing interrupt source overrides entry\n");
  563. if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0)
  564. printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
  565. skip_madt:
  566. /*
  567. * FADT says whether a legacy keyboard controller is present.
  568. * The FADT also contains an SCI_INT line, by which the system
  569. * gets interrupts such as power and sleep buttons. If it's not
  570. * on a Legacy interrupt, it needs to be setup.
  571. */
  572. if (acpi_table_parse(ACPI_FADT, acpi_parse_fadt) < 1)
  573. printk(KERN_ERR PREFIX "Can't find FADT\n");
  574. #ifdef CONFIG_SMP
  575. if (available_cpus == 0) {
  576. printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
  577. printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
  578. smp_boot_data.cpu_phys_id[available_cpus] =
  579. hard_smp_processor_id();
  580. available_cpus = 1; /* We've got at least one of these, no? */
  581. }
  582. smp_boot_data.cpu_count = available_cpus;
  583. smp_build_cpu_map();
  584. # ifdef CONFIG_ACPI_NUMA
  585. if (srat_num_cpus == 0) {
  586. int cpu, i = 1;
  587. for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
  588. if (smp_boot_data.cpu_phys_id[cpu] !=
  589. hard_smp_processor_id())
  590. node_cpuid[i++].phys_id =
  591. smp_boot_data.cpu_phys_id[cpu];
  592. }
  593. # endif
  594. #endif
  595. #ifdef CONFIG_ACPI_NUMA
  596. build_cpu_to_node_map();
  597. #endif
  598. /* Make boot-up look pretty */
  599. printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus,
  600. total_cpus);
  601. return 0;
  602. }
  603. int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  604. {
  605. int vector;
  606. if (has_8259 && gsi < 16)
  607. *irq = isa_irq_to_vector(gsi);
  608. else {
  609. vector = gsi_to_vector(gsi);
  610. if (vector == -1)
  611. return -1;
  612. *irq = vector;
  613. }
  614. return 0;
  615. }
  616. /*
  617. * ACPI based hotplug CPU support
  618. */
  619. #ifdef CONFIG_ACPI_HOTPLUG_CPU
  620. static
  621. int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
  622. {
  623. #ifdef CONFIG_ACPI_NUMA
  624. int pxm_id;
  625. pxm_id = acpi_get_pxm(handle);
  626. /*
  627. * Assuming that the container driver would have set the proximity
  628. * domain and would have initialized pxm_to_nid_map[pxm_id] && pxm_flag
  629. */
  630. node_cpuid[cpu].nid = (pxm_id < 0) ? 0 : pxm_to_nid_map[pxm_id];
  631. node_cpuid[cpu].phys_id = physid;
  632. #endif
  633. return (0);
  634. }
  635. int additional_cpus __initdata = -1;
  636. static __init int setup_additional_cpus(char *s)
  637. {
  638. if (s)
  639. additional_cpus = simple_strtol(s, NULL, 0);
  640. return 0;
  641. }
  642. early_param("additional_cpus", setup_additional_cpus);
  643. /*
  644. * cpu_possible_map should be static, it cannot change as cpu's
  645. * are onlined, or offlined. The reason is per-cpu data-structures
  646. * are allocated by some modules at init time, and dont expect to
  647. * do this dynamically on cpu arrival/departure.
  648. * cpu_present_map on the other hand can change dynamically.
  649. * In case when cpu_hotplug is not compiled, then we resort to current
  650. * behaviour, which is cpu_possible == cpu_present.
  651. * - Ashok Raj
  652. *
  653. * Three ways to find out the number of additional hotplug CPUs:
  654. * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
  655. * - The user can overwrite it with additional_cpus=NUM
  656. * - Otherwise don't reserve additional CPUs.
  657. */
  658. __init void prefill_possible_map(void)
  659. {
  660. int i;
  661. int possible, disabled_cpus;
  662. disabled_cpus = total_cpus - available_cpus;
  663. if (additional_cpus == -1) {
  664. if (disabled_cpus > 0)
  665. additional_cpus = disabled_cpus;
  666. else
  667. additional_cpus = 0;
  668. }
  669. possible = available_cpus + additional_cpus;
  670. if (possible > NR_CPUS)
  671. possible = NR_CPUS;
  672. printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
  673. possible, max((possible - available_cpus), 0));
  674. for (i = 0; i < possible; i++)
  675. cpu_set(i, cpu_possible_map);
  676. }
  677. int acpi_map_lsapic(acpi_handle handle, int *pcpu)
  678. {
  679. struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
  680. union acpi_object *obj;
  681. struct acpi_table_lsapic *lsapic;
  682. cpumask_t tmp_map;
  683. long physid;
  684. int cpu;
  685. if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
  686. return -EINVAL;
  687. if (!buffer.length || !buffer.pointer)
  688. return -EINVAL;
  689. obj = buffer.pointer;
  690. if (obj->type != ACPI_TYPE_BUFFER ||
  691. obj->buffer.length < sizeof(*lsapic)) {
  692. acpi_os_free(buffer.pointer);
  693. return -EINVAL;
  694. }
  695. lsapic = (struct acpi_table_lsapic *)obj->buffer.pointer;
  696. if ((lsapic->header.type != ACPI_MADT_LSAPIC) ||
  697. (!lsapic->flags.enabled)) {
  698. acpi_os_free(buffer.pointer);
  699. return -EINVAL;
  700. }
  701. physid = ((lsapic->id << 8) | (lsapic->eid));
  702. acpi_os_free(buffer.pointer);
  703. buffer.length = ACPI_ALLOCATE_BUFFER;
  704. buffer.pointer = NULL;
  705. cpus_complement(tmp_map, cpu_present_map);
  706. cpu = first_cpu(tmp_map);
  707. if (cpu >= NR_CPUS)
  708. return -EINVAL;
  709. acpi_map_cpu2node(handle, cpu, physid);
  710. cpu_set(cpu, cpu_present_map);
  711. ia64_cpu_to_sapicid[cpu] = physid;
  712. ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu];
  713. *pcpu = cpu;
  714. return (0);
  715. }
  716. EXPORT_SYMBOL(acpi_map_lsapic);
  717. int acpi_unmap_lsapic(int cpu)
  718. {
  719. int i;
  720. for (i = 0; i < MAX_SAPICS; i++) {
  721. if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) {
  722. ia64_acpiid_to_sapicid[i] = -1;
  723. break;
  724. }
  725. }
  726. ia64_cpu_to_sapicid[cpu] = -1;
  727. cpu_clear(cpu, cpu_present_map);
  728. #ifdef CONFIG_ACPI_NUMA
  729. /* NUMA specific cleanup's */
  730. #endif
  731. return (0);
  732. }
  733. EXPORT_SYMBOL(acpi_unmap_lsapic);
  734. #endif /* CONFIG_ACPI_HOTPLUG_CPU */
  735. #ifdef CONFIG_ACPI_NUMA
  736. static acpi_status __devinit
  737. acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
  738. {
  739. struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
  740. union acpi_object *obj;
  741. struct acpi_table_iosapic *iosapic;
  742. unsigned int gsi_base;
  743. int pxm, node;
  744. /* Only care about objects w/ a method that returns the MADT */
  745. if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
  746. return AE_OK;
  747. if (!buffer.length || !buffer.pointer)
  748. return AE_OK;
  749. obj = buffer.pointer;
  750. if (obj->type != ACPI_TYPE_BUFFER ||
  751. obj->buffer.length < sizeof(*iosapic)) {
  752. acpi_os_free(buffer.pointer);
  753. return AE_OK;
  754. }
  755. iosapic = (struct acpi_table_iosapic *)obj->buffer.pointer;
  756. if (iosapic->header.type != ACPI_MADT_IOSAPIC) {
  757. acpi_os_free(buffer.pointer);
  758. return AE_OK;
  759. }
  760. gsi_base = iosapic->global_irq_base;
  761. acpi_os_free(buffer.pointer);
  762. /*
  763. * OK, it's an IOSAPIC MADT entry, look for a _PXM value to tell
  764. * us which node to associate this with.
  765. */
  766. pxm = acpi_get_pxm(handle);
  767. if (pxm < 0)
  768. return AE_OK;
  769. node = pxm_to_nid_map[pxm];
  770. if (node >= MAX_NUMNODES || !node_online(node) ||
  771. cpus_empty(node_to_cpumask(node)))
  772. return AE_OK;
  773. /* We know a gsi to node mapping! */
  774. map_iosapic_to_node(gsi_base, node);
  775. return AE_OK;
  776. }
  777. static int __init
  778. acpi_map_iosapics (void)
  779. {
  780. acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
  781. return 0;
  782. }
  783. fs_initcall(acpi_map_iosapics);
  784. #endif /* CONFIG_ACPI_NUMA */
  785. int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
  786. {
  787. int err;
  788. if ((err = iosapic_init(phys_addr, gsi_base)))
  789. return err;
  790. #ifdef CONFIG_ACPI_NUMA
  791. acpi_map_iosapic(handle, 0, NULL, NULL);
  792. #endif /* CONFIG_ACPI_NUMA */
  793. return 0;
  794. }
  795. EXPORT_SYMBOL(acpi_register_ioapic);
  796. int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
  797. {
  798. return iosapic_remove(gsi_base);
  799. }
  800. EXPORT_SYMBOL(acpi_unregister_ioapic);
  801. #endif /* CONFIG_ACPI */