paravirt.c 6.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253
  1. /* Paravirtualization interfaces
  2. Copyright (C) 2006 Rusty Russell IBM Corporation
  3. This program is free software; you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation; either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program; if not, write to the Free Software
  13. Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  14. */
  15. #include <linux/errno.h>
  16. #include <linux/module.h>
  17. #include <linux/efi.h>
  18. #include <linux/bcd.h>
  19. #include <linux/start_kernel.h>
  20. #include <asm/bug.h>
  21. #include <asm/paravirt.h>
  22. #include <asm/desc.h>
  23. #include <asm/setup.h>
  24. #include <asm/arch_hooks.h>
  25. #include <asm/time.h>
  26. #include <asm/irq.h>
  27. #include <asm/delay.h>
  28. #include <asm/fixmap.h>
  29. #include <asm/apic.h>
  30. #include <asm/tlbflush.h>
  31. #include <asm/timer.h>
  32. /* nop stub */
  33. void _paravirt_nop(void)
  34. {
  35. }
  36. static void __init default_banner(void)
  37. {
  38. printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
  39. paravirt_ops.name);
  40. }
  41. char *memory_setup(void)
  42. {
  43. return paravirt_ops.memory_setup();
  44. }
  45. /* Simple instruction patching code. */
  46. #define DEF_NATIVE(name, code) \
  47. extern const char start_##name[], end_##name[]; \
  48. asm("start_" #name ": " code "; end_" #name ":")
  49. DEF_NATIVE(cli, "cli");
  50. DEF_NATIVE(sti, "sti");
  51. DEF_NATIVE(popf, "push %eax; popf");
  52. DEF_NATIVE(pushf, "pushf; pop %eax");
  53. DEF_NATIVE(pushf_cli, "pushf; pop %eax; cli");
  54. DEF_NATIVE(iret, "iret");
  55. DEF_NATIVE(sti_sysexit, "sti; sysexit");
  56. static const struct native_insns
  57. {
  58. const char *start, *end;
  59. } native_insns[] = {
  60. [PARAVIRT_IRQ_DISABLE] = { start_cli, end_cli },
  61. [PARAVIRT_IRQ_ENABLE] = { start_sti, end_sti },
  62. [PARAVIRT_RESTORE_FLAGS] = { start_popf, end_popf },
  63. [PARAVIRT_SAVE_FLAGS] = { start_pushf, end_pushf },
  64. [PARAVIRT_SAVE_FLAGS_IRQ_DISABLE] = { start_pushf_cli, end_pushf_cli },
  65. [PARAVIRT_INTERRUPT_RETURN] = { start_iret, end_iret },
  66. [PARAVIRT_STI_SYSEXIT] = { start_sti_sysexit, end_sti_sysexit },
  67. };
  68. static unsigned native_patch(u8 type, u16 clobbers, void *insns, unsigned len)
  69. {
  70. unsigned int insn_len;
  71. /* Don't touch it if we don't have a replacement */
  72. if (type >= ARRAY_SIZE(native_insns) || !native_insns[type].start)
  73. return len;
  74. insn_len = native_insns[type].end - native_insns[type].start;
  75. /* Similarly if we can't fit replacement. */
  76. if (len < insn_len)
  77. return len;
  78. memcpy(insns, native_insns[type].start, insn_len);
  79. return insn_len;
  80. }
  81. void init_IRQ(void)
  82. {
  83. paravirt_ops.init_IRQ();
  84. }
  85. static void native_flush_tlb(void)
  86. {
  87. __native_flush_tlb();
  88. }
  89. /*
  90. * Global pages have to be flushed a bit differently. Not a real
  91. * performance problem because this does not happen often.
  92. */
  93. static void native_flush_tlb_global(void)
  94. {
  95. __native_flush_tlb_global();
  96. }
  97. static void native_flush_tlb_single(u32 addr)
  98. {
  99. __native_flush_tlb_single(addr);
  100. }
  101. /* These are in entry.S */
  102. extern void native_iret(void);
  103. extern void native_irq_enable_sysexit(void);
  104. static int __init print_banner(void)
  105. {
  106. paravirt_ops.banner();
  107. return 0;
  108. }
  109. core_initcall(print_banner);
  110. struct paravirt_ops paravirt_ops = {
  111. .name = "bare hardware",
  112. .paravirt_enabled = 0,
  113. .kernel_rpl = 0,
  114. .shared_kernel_pmd = 1, /* Only used when CONFIG_X86_PAE is set */
  115. .patch = native_patch,
  116. .banner = default_banner,
  117. .arch_setup = paravirt_nop,
  118. .memory_setup = machine_specific_memory_setup,
  119. .get_wallclock = native_get_wallclock,
  120. .set_wallclock = native_set_wallclock,
  121. .time_init = hpet_time_init,
  122. .init_IRQ = native_init_IRQ,
  123. .cpuid = native_cpuid,
  124. .get_debugreg = native_get_debugreg,
  125. .set_debugreg = native_set_debugreg,
  126. .clts = native_clts,
  127. .read_cr0 = native_read_cr0,
  128. .write_cr0 = native_write_cr0,
  129. .read_cr2 = native_read_cr2,
  130. .write_cr2 = native_write_cr2,
  131. .read_cr3 = native_read_cr3,
  132. .write_cr3 = native_write_cr3,
  133. .read_cr4 = native_read_cr4,
  134. .read_cr4_safe = native_read_cr4_safe,
  135. .write_cr4 = native_write_cr4,
  136. .save_fl = native_save_fl,
  137. .restore_fl = native_restore_fl,
  138. .irq_disable = native_irq_disable,
  139. .irq_enable = native_irq_enable,
  140. .safe_halt = native_safe_halt,
  141. .halt = native_halt,
  142. .wbinvd = native_wbinvd,
  143. .read_msr = native_read_msr_safe,
  144. .write_msr = native_write_msr_safe,
  145. .read_tsc = native_read_tsc,
  146. .read_pmc = native_read_pmc,
  147. .get_scheduled_cycles = native_read_tsc,
  148. .get_cpu_khz = native_calculate_cpu_khz,
  149. .load_tr_desc = native_load_tr_desc,
  150. .set_ldt = native_set_ldt,
  151. .load_gdt = native_load_gdt,
  152. .load_idt = native_load_idt,
  153. .store_gdt = native_store_gdt,
  154. .store_idt = native_store_idt,
  155. .store_tr = native_store_tr,
  156. .load_tls = native_load_tls,
  157. .write_ldt_entry = write_dt_entry,
  158. .write_gdt_entry = write_dt_entry,
  159. .write_idt_entry = write_dt_entry,
  160. .load_esp0 = native_load_esp0,
  161. .set_iopl_mask = native_set_iopl_mask,
  162. .io_delay = native_io_delay,
  163. #ifdef CONFIG_X86_LOCAL_APIC
  164. .apic_write = native_apic_write,
  165. .apic_write_atomic = native_apic_write_atomic,
  166. .apic_read = native_apic_read,
  167. .setup_boot_clock = setup_boot_APIC_clock,
  168. .setup_secondary_clock = setup_secondary_APIC_clock,
  169. #endif
  170. .set_lazy_mode = paravirt_nop,
  171. .pagetable_setup_start = native_pagetable_setup_start,
  172. .pagetable_setup_done = native_pagetable_setup_done,
  173. .flush_tlb_user = native_flush_tlb,
  174. .flush_tlb_kernel = native_flush_tlb_global,
  175. .flush_tlb_single = native_flush_tlb_single,
  176. .map_pt_hook = paravirt_nop,
  177. .alloc_pt = paravirt_nop,
  178. .alloc_pd = paravirt_nop,
  179. .alloc_pd_clone = paravirt_nop,
  180. .release_pt = paravirt_nop,
  181. .release_pd = paravirt_nop,
  182. .set_pte = native_set_pte,
  183. .set_pte_at = native_set_pte_at,
  184. .set_pmd = native_set_pmd,
  185. .pte_update = paravirt_nop,
  186. .pte_update_defer = paravirt_nop,
  187. .ptep_get_and_clear = native_ptep_get_and_clear,
  188. #ifdef CONFIG_X86_PAE
  189. .set_pte_atomic = native_set_pte_atomic,
  190. .set_pte_present = native_set_pte_present,
  191. .set_pud = native_set_pud,
  192. .pte_clear = native_pte_clear,
  193. .pmd_clear = native_pmd_clear,
  194. .pmd_val = native_pmd_val,
  195. .make_pmd = native_make_pmd,
  196. #endif
  197. .pte_val = native_pte_val,
  198. .pgd_val = native_pgd_val,
  199. .make_pte = native_make_pte,
  200. .make_pgd = native_make_pgd,
  201. .irq_enable_sysexit = native_irq_enable_sysexit,
  202. .iret = native_iret,
  203. .dup_mmap = paravirt_nop,
  204. .exit_mmap = paravirt_nop,
  205. .activate_mm = paravirt_nop,
  206. .startup_ipi_hook = paravirt_nop,
  207. };
  208. /*
  209. * NOTE: CONFIG_PARAVIRT is experimental and the paravirt_ops
  210. * semantics are subject to change. Hence we only do this
  211. * internal-only export of this, until it gets sorted out and
  212. * all lowlevel CPU ops used by modules are separately exported.
  213. */
  214. EXPORT_SYMBOL_GPL(paravirt_ops);