sta_info.h 14 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457
  1. /*
  2. * Copyright 2002-2005, Devicescape Software, Inc.
  3. *
  4. * This program is free software; you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License version 2 as
  6. * published by the Free Software Foundation.
  7. */
  8. #ifndef STA_INFO_H
  9. #define STA_INFO_H
  10. #include <linux/list.h>
  11. #include <linux/types.h>
  12. #include <linux/if_ether.h>
  13. #include "key.h"
  14. /**
  15. * enum ieee80211_sta_info_flags - Stations flags
  16. *
  17. * These flags are used with &struct sta_info's @flags member.
  18. *
  19. * @WLAN_STA_AUTH: Station is authenticated.
  20. * @WLAN_STA_ASSOC: Station is associated.
  21. * @WLAN_STA_PS: Station is in power-save mode
  22. * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
  23. * This bit is always checked so needs to be enabled for all stations
  24. * when virtual port control is not in use.
  25. * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
  26. * frames.
  27. * @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
  28. * @WLAN_STA_WME: Station is a QoS-STA.
  29. * @WLAN_STA_WDS: Station is one of our WDS peers.
  30. * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
  31. * IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
  32. * frame to this station is transmitted.
  33. * @WLAN_STA_MFP: Management frame protection is used with this STA.
  34. * @WLAN_STA_SUSPEND: Set/cleared during a suspend/resume cycle.
  35. * Used to deny ADDBA requests (both TX and RX).
  36. */
  37. enum ieee80211_sta_info_flags {
  38. WLAN_STA_AUTH = 1<<0,
  39. WLAN_STA_ASSOC = 1<<1,
  40. WLAN_STA_PS = 1<<2,
  41. WLAN_STA_AUTHORIZED = 1<<3,
  42. WLAN_STA_SHORT_PREAMBLE = 1<<4,
  43. WLAN_STA_ASSOC_AP = 1<<5,
  44. WLAN_STA_WME = 1<<6,
  45. WLAN_STA_WDS = 1<<7,
  46. WLAN_STA_CLEAR_PS_FILT = 1<<9,
  47. WLAN_STA_MFP = 1<<10,
  48. WLAN_STA_SUSPEND = 1<<11
  49. };
  50. #define STA_TID_NUM 16
  51. #define ADDBA_RESP_INTERVAL HZ
  52. #define HT_AGG_MAX_RETRIES (0x3)
  53. #define HT_AGG_STATE_INITIATOR_SHIFT (4)
  54. #define HT_ADDBA_REQUESTED_MSK BIT(0)
  55. #define HT_ADDBA_DRV_READY_MSK BIT(1)
  56. #define HT_ADDBA_RECEIVED_MSK BIT(2)
  57. #define HT_AGG_STATE_REQ_STOP_BA_MSK BIT(3)
  58. #define HT_AGG_STATE_INITIATOR_MSK BIT(HT_AGG_STATE_INITIATOR_SHIFT)
  59. #define HT_AGG_STATE_IDLE (0x0)
  60. #define HT_AGG_STATE_OPERATIONAL (HT_ADDBA_REQUESTED_MSK | \
  61. HT_ADDBA_DRV_READY_MSK | \
  62. HT_ADDBA_RECEIVED_MSK)
  63. /**
  64. * struct tid_ampdu_tx - TID aggregation information (Tx).
  65. *
  66. * @addba_resp_timer: timer for peer's response to addba request
  67. * @pending: pending frames queue -- use sta's spinlock to protect
  68. * @ssn: Starting Sequence Number expected to be aggregated.
  69. * @dialog_token: dialog token for aggregation session
  70. */
  71. struct tid_ampdu_tx {
  72. struct timer_list addba_resp_timer;
  73. struct sk_buff_head pending;
  74. u16 ssn;
  75. u8 dialog_token;
  76. };
  77. /**
  78. * struct tid_ampdu_rx - TID aggregation information (Rx).
  79. *
  80. * @reorder_buf: buffer to reorder incoming aggregated MPDUs
  81. * @reorder_time: jiffies when skb was added
  82. * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
  83. * @head_seq_num: head sequence number in reordering buffer.
  84. * @stored_mpdu_num: number of MPDUs in reordering buffer
  85. * @ssn: Starting Sequence Number expected to be aggregated.
  86. * @buf_size: buffer size for incoming A-MPDUs
  87. * @timeout: reset timer value (in TUs).
  88. * @dialog_token: dialog token for aggregation session
  89. * @shutdown: this session is being shut down due to STA removal
  90. */
  91. struct tid_ampdu_rx {
  92. struct sk_buff **reorder_buf;
  93. unsigned long *reorder_time;
  94. struct timer_list session_timer;
  95. u16 head_seq_num;
  96. u16 stored_mpdu_num;
  97. u16 ssn;
  98. u16 buf_size;
  99. u16 timeout;
  100. u8 dialog_token;
  101. bool shutdown;
  102. };
  103. /**
  104. * enum plink_state - state of a mesh peer link finite state machine
  105. *
  106. * @PLINK_LISTEN: initial state, considered the implicit state of non existant
  107. * mesh peer links
  108. * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh peer
  109. * @PLINK_OPN_RCVD: mesh plink open frame has been received from this mesh peer
  110. * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from this mesh
  111. * peer
  112. * @PLINK_ESTAB: mesh peer link is established
  113. * @PLINK_HOLDING: mesh peer link is being closed or cancelled
  114. * @PLINK_BLOCKED: all frames transmitted from this mesh plink are discarded
  115. */
  116. enum plink_state {
  117. PLINK_LISTEN,
  118. PLINK_OPN_SNT,
  119. PLINK_OPN_RCVD,
  120. PLINK_CNF_RCVD,
  121. PLINK_ESTAB,
  122. PLINK_HOLDING,
  123. PLINK_BLOCKED
  124. };
  125. /**
  126. * struct sta_ampdu_mlme - STA aggregation information.
  127. *
  128. * @tid_state_rx: TID's state in Rx session state machine.
  129. * @tid_rx: aggregation info for Rx per TID
  130. * @tid_state_tx: TID's state in Tx session state machine.
  131. * @tid_tx: aggregation info for Tx per TID
  132. * @addba_req_num: number of times addBA request has been sent.
  133. * @dialog_token_allocator: dialog token enumerator for each new session;
  134. */
  135. struct sta_ampdu_mlme {
  136. /* rx */
  137. u8 tid_state_rx[STA_TID_NUM];
  138. struct tid_ampdu_rx *tid_rx[STA_TID_NUM];
  139. /* tx */
  140. u8 tid_state_tx[STA_TID_NUM];
  141. struct tid_ampdu_tx *tid_tx[STA_TID_NUM];
  142. u8 addba_req_num[STA_TID_NUM];
  143. u8 dialog_token_allocator;
  144. };
  145. /* see __sta_info_unlink */
  146. #define STA_INFO_PIN_STAT_NORMAL 0
  147. #define STA_INFO_PIN_STAT_PINNED 1
  148. #define STA_INFO_PIN_STAT_DESTROY 2
  149. /**
  150. * struct sta_info - STA information
  151. *
  152. * This structure collects information about a station that
  153. * mac80211 is communicating with.
  154. *
  155. * @list: global linked list entry
  156. * @hnext: hash table linked list pointer
  157. * @local: pointer to the global information
  158. * @sdata: virtual interface this station belongs to
  159. * @key: peer key negotiated with this station, if any
  160. * @rate_ctrl: rate control algorithm reference
  161. * @rate_ctrl_priv: rate control private per-STA pointer
  162. * @last_tx_rate: rate used for last transmit, to report to userspace as
  163. * "the" transmit rate
  164. * @lock: used for locking all fields that require locking, see comments
  165. * in the header file.
  166. * @flaglock: spinlock for flags accesses
  167. * @listen_interval: listen interval of this station, when we're acting as AP
  168. * @pin_status: used internally for pinning a STA struct into memory
  169. * @flags: STA flags, see &enum ieee80211_sta_info_flags
  170. * @ps_tx_buf: buffer of frames to transmit to this station
  171. * when it leaves power saving state
  172. * @tx_filtered: buffer of frames we already tried to transmit
  173. * but were filtered by hardware due to STA having entered
  174. * power saving state
  175. * @rx_packets: Number of MSDUs received from this STA
  176. * @rx_bytes: Number of bytes received from this STA
  177. * @wep_weak_iv_count: number of weak WEP IVs received from this station
  178. * @last_rx: time (in jiffies) when last frame was received from this STA
  179. * @num_duplicates: number of duplicate frames received from this STA
  180. * @rx_fragments: number of received MPDUs
  181. * @rx_dropped: number of dropped MPDUs from this STA
  182. * @last_signal: signal of last received frame from this STA
  183. * @last_qual: qual of last received frame from this STA
  184. * @last_noise: noise of last received frame from this STA
  185. * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  186. * @tx_filtered_count: number of frames the hardware filtered for this STA
  187. * @tx_retry_failed: number of frames that failed retry
  188. * @tx_retry_count: total number of retries for frames to this STA
  189. * @fail_avg: moving percentage of failed MSDUs
  190. * @tx_packets: number of RX/TX MSDUs
  191. * @tx_bytes: number of bytes transmitted to this STA
  192. * @tx_fragments: number of transmitted MPDUs
  193. * @tid_seq: per-TID sequence numbers for sending to this STA
  194. * @ampdu_mlme: A-MPDU state machine state
  195. * @timer_to_tid: identity mapping to ID timers
  196. * @llid: Local link ID
  197. * @plid: Peer link ID
  198. * @reason: Cancel reason on PLINK_HOLDING state
  199. * @plink_retries: Retries in establishment
  200. * @ignore_plink_timer: ignore the peer-link timer (used internally)
  201. * @plink_state: peer link state
  202. * @plink_timeout: timeout of peer link
  203. * @plink_timer: peer link watch timer
  204. * @plink_timer_was_running: used by suspend/resume to restore timers
  205. * @debugfs: debug filesystem info
  206. * @sta: station information we share with the driver
  207. */
  208. struct sta_info {
  209. /* General information, mostly static */
  210. struct list_head list;
  211. struct sta_info *hnext;
  212. struct ieee80211_local *local;
  213. struct ieee80211_sub_if_data *sdata;
  214. struct ieee80211_key *key;
  215. struct rate_control_ref *rate_ctrl;
  216. void *rate_ctrl_priv;
  217. spinlock_t lock;
  218. spinlock_t flaglock;
  219. u16 listen_interval;
  220. /*
  221. * for use by the internal lifetime management,
  222. * see __sta_info_unlink
  223. */
  224. u8 pin_status;
  225. /*
  226. * frequently updated, locked with own spinlock (flaglock),
  227. * use the accessors defined below
  228. */
  229. u32 flags;
  230. /*
  231. * STA powersave frame queues, no more than the internal
  232. * locking required.
  233. */
  234. struct sk_buff_head ps_tx_buf;
  235. struct sk_buff_head tx_filtered;
  236. /* Updated from RX path only, no locking requirements */
  237. unsigned long rx_packets, rx_bytes;
  238. unsigned long wep_weak_iv_count;
  239. unsigned long last_rx;
  240. unsigned long num_duplicates;
  241. unsigned long rx_fragments;
  242. unsigned long rx_dropped;
  243. int last_signal;
  244. int last_qual;
  245. int last_noise;
  246. __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
  247. /* Updated from TX status path only, no locking requirements */
  248. unsigned long tx_filtered_count;
  249. unsigned long tx_retry_failed, tx_retry_count;
  250. /* moving percentage of failed MSDUs */
  251. unsigned int fail_avg;
  252. /* Updated from TX path only, no locking requirements */
  253. unsigned long tx_packets;
  254. unsigned long tx_bytes;
  255. unsigned long tx_fragments;
  256. struct ieee80211_tx_rate last_tx_rate;
  257. u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
  258. /*
  259. * Aggregation information, locked with lock.
  260. */
  261. struct sta_ampdu_mlme ampdu_mlme;
  262. u8 timer_to_tid[STA_TID_NUM];
  263. #ifdef CONFIG_MAC80211_MESH
  264. /*
  265. * Mesh peer link attributes
  266. * TODO: move to a sub-structure that is referenced with pointer?
  267. */
  268. __le16 llid;
  269. __le16 plid;
  270. __le16 reason;
  271. u8 plink_retries;
  272. bool ignore_plink_timer;
  273. bool plink_timer_was_running;
  274. enum plink_state plink_state;
  275. u32 plink_timeout;
  276. struct timer_list plink_timer;
  277. #endif
  278. #ifdef CONFIG_MAC80211_DEBUGFS
  279. struct sta_info_debugfsdentries {
  280. struct dentry *dir;
  281. struct dentry *flags;
  282. struct dentry *num_ps_buf_frames;
  283. struct dentry *inactive_ms;
  284. struct dentry *last_seq_ctrl;
  285. struct dentry *agg_status;
  286. struct dentry *aid;
  287. struct dentry *dev;
  288. struct dentry *rx_packets;
  289. struct dentry *tx_packets;
  290. struct dentry *rx_bytes;
  291. struct dentry *tx_bytes;
  292. struct dentry *rx_duplicates;
  293. struct dentry *rx_fragments;
  294. struct dentry *rx_dropped;
  295. struct dentry *tx_fragments;
  296. struct dentry *tx_filtered;
  297. struct dentry *tx_retry_failed;
  298. struct dentry *tx_retry_count;
  299. struct dentry *last_signal;
  300. struct dentry *last_qual;
  301. struct dentry *last_noise;
  302. struct dentry *wep_weak_iv_count;
  303. bool add_has_run;
  304. } debugfs;
  305. #endif
  306. /* keep last! */
  307. struct ieee80211_sta sta;
  308. };
  309. static inline enum plink_state sta_plink_state(struct sta_info *sta)
  310. {
  311. #ifdef CONFIG_MAC80211_MESH
  312. return sta->plink_state;
  313. #endif
  314. return PLINK_LISTEN;
  315. }
  316. static inline void set_sta_flags(struct sta_info *sta, const u32 flags)
  317. {
  318. unsigned long irqfl;
  319. spin_lock_irqsave(&sta->flaglock, irqfl);
  320. sta->flags |= flags;
  321. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  322. }
  323. static inline void clear_sta_flags(struct sta_info *sta, const u32 flags)
  324. {
  325. unsigned long irqfl;
  326. spin_lock_irqsave(&sta->flaglock, irqfl);
  327. sta->flags &= ~flags;
  328. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  329. }
  330. static inline u32 test_sta_flags(struct sta_info *sta, const u32 flags)
  331. {
  332. u32 ret;
  333. unsigned long irqfl;
  334. spin_lock_irqsave(&sta->flaglock, irqfl);
  335. ret = sta->flags & flags;
  336. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  337. return ret;
  338. }
  339. static inline u32 test_and_clear_sta_flags(struct sta_info *sta,
  340. const u32 flags)
  341. {
  342. u32 ret;
  343. unsigned long irqfl;
  344. spin_lock_irqsave(&sta->flaglock, irqfl);
  345. ret = sta->flags & flags;
  346. sta->flags &= ~flags;
  347. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  348. return ret;
  349. }
  350. static inline u32 get_sta_flags(struct sta_info *sta)
  351. {
  352. u32 ret;
  353. unsigned long irqfl;
  354. spin_lock_irqsave(&sta->flaglock, irqfl);
  355. ret = sta->flags;
  356. spin_unlock_irqrestore(&sta->flaglock, irqfl);
  357. return ret;
  358. }
  359. #define STA_HASH_SIZE 256
  360. #define STA_HASH(sta) (sta[5])
  361. /* Maximum number of frames to buffer per power saving station */
  362. #define STA_MAX_TX_BUFFER 128
  363. /* Minimum buffered frame expiry time. If STA uses listen interval that is
  364. * smaller than this value, the minimum value here is used instead. */
  365. #define STA_TX_BUFFER_EXPIRE (10 * HZ)
  366. /* How often station data is cleaned up (e.g., expiration of buffered frames)
  367. */
  368. #define STA_INFO_CLEANUP_INTERVAL (10 * HZ)
  369. /*
  370. * Get a STA info, must have be under RCU read lock.
  371. */
  372. struct sta_info *sta_info_get(struct ieee80211_local *local, const u8 *addr);
  373. /*
  374. * Get STA info by index, BROKEN!
  375. */
  376. struct sta_info *sta_info_get_by_idx(struct ieee80211_local *local, int idx,
  377. struct net_device *dev);
  378. /*
  379. * Create a new STA info, caller owns returned structure
  380. * until sta_info_insert().
  381. */
  382. struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
  383. u8 *addr, gfp_t gfp);
  384. /*
  385. * Insert STA info into hash table/list, returns zero or a
  386. * -EEXIST if (if the same MAC address is already present).
  387. *
  388. * Calling this without RCU protection makes the caller
  389. * relinquish its reference to @sta.
  390. */
  391. int sta_info_insert(struct sta_info *sta);
  392. /*
  393. * Unlink a STA info from the hash table/list.
  394. * This can NULL the STA pointer if somebody else
  395. * has already unlinked it.
  396. */
  397. void sta_info_unlink(struct sta_info **sta);
  398. void sta_info_destroy(struct sta_info *sta);
  399. void sta_info_set_tim_bit(struct sta_info *sta);
  400. void sta_info_clear_tim_bit(struct sta_info *sta);
  401. void sta_info_init(struct ieee80211_local *local);
  402. int sta_info_start(struct ieee80211_local *local);
  403. void sta_info_stop(struct ieee80211_local *local);
  404. int sta_info_flush(struct ieee80211_local *local,
  405. struct ieee80211_sub_if_data *sdata);
  406. void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
  407. unsigned long exp_time);
  408. #endif /* STA_INFO_H */