Kconfig 6.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304
  1. choice
  2. prompt "Machine Type"
  3. depends on EMBEDDED6xx
  4. config KATANA
  5. bool "Artesyn-Katana"
  6. help
  7. Select KATANA if configuring an Artesyn KATANA 750i or 3750
  8. cPCI board.
  9. config WILLOW
  10. bool "Cogent-Willow"
  11. config CPCI690
  12. bool "Force-CPCI690"
  13. help
  14. Select CPCI690 if configuring a Force CPCI690 cPCI board.
  15. config POWERPMC250
  16. bool "Force-PowerPMC250"
  17. config CHESTNUT
  18. bool "IBM 750FX Eval board or 750GX Eval board"
  19. help
  20. Select CHESTNUT if configuring an IBM 750FX Eval Board or a
  21. IBM 750GX Eval board.
  22. config SPRUCE
  23. bool "IBM-Spruce"
  24. select PPC_INDIRECT_PCI
  25. config HDPU
  26. bool "Sky-HDPU"
  27. help
  28. Select HDPU if configuring a Sky Computers Compute Blade.
  29. config HDPU_FEATURES
  30. depends HDPU
  31. tristate "HDPU-Features"
  32. help
  33. Select to enable HDPU enhanced features.
  34. config EV64260
  35. bool "Marvell-EV64260BP"
  36. help
  37. Select EV64260 if configuring a Marvell (formerly Galileo)
  38. EV64260BP Evaluation platform.
  39. config LOPEC
  40. bool "Motorola-LoPEC"
  41. select PPC_I8259
  42. config MVME5100
  43. bool "Motorola-MVME5100"
  44. select PPC_INDIRECT_PCI
  45. config PPLUS
  46. bool "Motorola-PowerPlus"
  47. select PPC_I8259
  48. select PPC_INDIRECT_PCI
  49. config PRPMC750
  50. bool "Motorola-PrPMC750"
  51. select PPC_INDIRECT_PCI
  52. config PRPMC800
  53. bool "Motorola-PrPMC800"
  54. select PPC_INDIRECT_PCI
  55. config SANDPOINT
  56. bool "Motorola-Sandpoint"
  57. select PPC_I8259
  58. help
  59. Select SANDPOINT if configuring for a Motorola Sandpoint X3
  60. (any flavor).
  61. config MPC7448HPC2
  62. bool "Freescale MPC7448HPC2(Taiga)"
  63. select TSI108_BRIDGE
  64. select DEFAULT_UIMAGE
  65. select PPC_UDBG_16550
  66. select MPIC
  67. select MPIC_WEIRD
  68. help
  69. Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
  70. platform
  71. config RADSTONE_PPC7D
  72. bool "Radstone Technology PPC7D board"
  73. select PPC_I8259
  74. config PAL4
  75. bool "SBS-Palomar4"
  76. config GEMINI
  77. bool "Synergy-Gemini"
  78. select PPC_INDIRECT_PCI
  79. depends on BROKEN
  80. help
  81. Select Gemini if configuring for a Synergy Microsystems' Gemini
  82. series Single Board Computer. More information is available at:
  83. <http://www.synergymicro.com/PressRel/97_10_15.html>.
  84. config EST8260
  85. bool "EST8260"
  86. ---help---
  87. The EST8260 is a single-board computer manufactured by Wind River
  88. Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
  89. the MPC8260. Wind River Systems has a website at
  90. <http://www.windriver.com/>, but the EST8260 cannot be found on it
  91. and has probably been discontinued or rebadged.
  92. config SBC82xx
  93. bool "SBC82xx"
  94. ---help---
  95. SBC PowerQUICC II, single-board computer with MPC82xx CPU
  96. Manufacturer: Wind River Systems, Inc.
  97. Date of Release: May 2003
  98. End of Life: -
  99. URL: <http://www.windriver.com/>
  100. config SBS8260
  101. bool "SBS8260"
  102. config RPX8260
  103. bool "RPXSUPER"
  104. config TQM8260
  105. bool "TQM8260"
  106. ---help---
  107. MPC8260 based module, little larger than credit card,
  108. up to 128 MB global + 64 MB local RAM, 32 MB Flash,
  109. 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
  110. 2 x serial ports, ...
  111. Manufacturer: TQ Components, www.tq-group.de
  112. Date of Release: June 2001
  113. End of Life: not yet :-)
  114. URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
  115. config ADS8272
  116. bool "ADS8272"
  117. config PQ2FADS
  118. bool "Freescale-PQ2FADS"
  119. help
  120. Select PQ2FADS if you wish to configure for a Freescale
  121. PQ2FADS board (-VR or -ZU).
  122. config EV64360
  123. bool "Marvell-EV64360BP"
  124. help
  125. Select EV64360 if configuring a Marvell EV64360BP Evaluation
  126. platform.
  127. endchoice
  128. config PQ2ADS
  129. bool
  130. depends on ADS8272
  131. default y
  132. config TQM8xxL
  133. bool
  134. depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
  135. default y
  136. config 8260
  137. bool "CPM2 Support" if WILLOW
  138. depends on 6xx
  139. default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
  140. help
  141. The MPC8260 is a typical embedded CPU made by Motorola. Selecting
  142. this option means that you wish to build a kernel for a machine with
  143. an 8260 class CPU.
  144. config 8272
  145. bool
  146. depends on 6xx
  147. default y if ADS8272
  148. select 8260
  149. help
  150. The MPC8272 CPM has a different internal dpram setup than other CPM2
  151. devices
  152. config CPM2
  153. bool
  154. depends on 8260 || MPC8560 || MPC8555
  155. default y
  156. help
  157. The CPM2 (Communications Processor Module) is a coprocessor on
  158. embedded CPUs made by Motorola. Selecting this option means that
  159. you wish to build a kernel for a machine with a CPM2 coprocessor
  160. on it (826x, 827x, 8560).
  161. config PPC_GEN550
  162. bool
  163. depends on SANDPOINT || SPRUCE || PPLUS || \
  164. PRPMC750 || PRPMC800 || LOPEC || \
  165. (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
  166. 83xx
  167. default y
  168. config FORCE
  169. bool
  170. depends on 6xx && POWERPMC250
  171. default y
  172. config GT64260
  173. bool
  174. depends on EV64260 || CPCI690
  175. default y
  176. config MV64360 # Really MV64360 & MV64460
  177. bool
  178. depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
  179. default y
  180. config MV64X60
  181. bool
  182. depends on (GT64260 || MV64360)
  183. select PPC_INDIRECT_PCI
  184. default y
  185. config TSI108_BRIDGE
  186. bool
  187. depends on MPC7448HPC2
  188. default y
  189. menu "Set bridge options"
  190. depends on MV64X60
  191. config NOT_COHERENT_CACHE
  192. bool "Turn off Cache Coherency"
  193. default n
  194. help
  195. Some 64x60 bridges lock up when trying to enforce cache coherency.
  196. When this option is selected, cache coherency will be turned off.
  197. Note that this can cause other problems (e.g., stale data being
  198. speculatively loaded via a cached mapping). Use at your own risk.
  199. config MV64X60_BASE
  200. hex "Set bridge base used by firmware"
  201. default "0xf1000000"
  202. help
  203. A firmware can leave the base address of the bridge's registers at
  204. a non-standard location. If so, set this value to reflect the
  205. address of that non-standard location.
  206. config MV64X60_NEW_BASE
  207. hex "Set bridge base used by kernel"
  208. default "0xf1000000"
  209. help
  210. If the current base address of the bridge's registers is not where
  211. you want it, set this value to the address that you want it moved to.
  212. endmenu
  213. config NONMONARCH_SUPPORT
  214. bool "Enable Non-Monarch Support"
  215. depends on PRPMC800
  216. config HARRIER
  217. bool
  218. depends on PRPMC800
  219. default y
  220. config EPIC_SERIAL_MODE
  221. bool
  222. depends on 6xx && (LOPEC || SANDPOINT)
  223. default y
  224. config MPC10X_BRIDGE
  225. bool
  226. depends on POWERPMC250 || LOPEC || SANDPOINT
  227. select PPC_INDIRECT_PCI
  228. default y
  229. config MPC10X_OPENPIC
  230. bool
  231. depends on POWERPMC250 || LOPEC || SANDPOINT
  232. default y
  233. config MPC10X_STORE_GATHERING
  234. bool "Enable MPC10x store gathering"
  235. depends on MPC10X_BRIDGE
  236. config SANDPOINT_ENABLE_UART1
  237. bool "Enable DUART mode on Sandpoint"
  238. depends on SANDPOINT
  239. help
  240. If this option is enabled then the MPC824x processor will run
  241. in DUART mode instead of UART mode.
  242. config HARRIER_STORE_GATHERING
  243. bool "Enable Harrier store gathering"
  244. depends on HARRIER
  245. config MVME5100_IPMC761_PRESENT
  246. bool "MVME5100 configured with an IPMC761"
  247. depends on MVME5100
  248. select PPC_I8259
  249. config SPRUCE_BAUD_33M
  250. bool "Spruce baud clock support"
  251. depends on SPRUCE