agg-rx.c 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332
  1. /*
  2. * HT handling
  3. *
  4. * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
  5. * Copyright 2002-2005, Instant802 Networks, Inc.
  6. * Copyright 2005-2006, Devicescape Software, Inc.
  7. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
  8. * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  9. * Copyright 2007-2010, Intel Corporation
  10. *
  11. * This program is free software; you can redistribute it and/or modify
  12. * it under the terms of the GNU General Public License version 2 as
  13. * published by the Free Software Foundation.
  14. */
  15. /**
  16. * DOC: RX A-MPDU aggregation
  17. *
  18. * Aggregation on the RX side requires only implementing the
  19. * @ampdu_action callback that is invoked to start/stop any
  20. * block-ack sessions for RX aggregation.
  21. *
  22. * When RX aggregation is started by the peer, the driver is
  23. * notified via @ampdu_action function, with the
  24. * %IEEE80211_AMPDU_RX_START action, and may reject the request
  25. * in which case a negative response is sent to the peer, if it
  26. * accepts it a positive response is sent.
  27. *
  28. * While the session is active, the device/driver are required
  29. * to de-aggregate frames and pass them up one by one to mac80211,
  30. * which will handle the reorder buffer.
  31. *
  32. * When the aggregation session is stopped again by the peer or
  33. * ourselves, the driver's @ampdu_action function will be called
  34. * with the action %IEEE80211_AMPDU_RX_STOP. In this case, the
  35. * call must not fail.
  36. */
  37. #include <linux/ieee80211.h>
  38. #include <linux/slab.h>
  39. #include <net/mac80211.h>
  40. #include "ieee80211_i.h"
  41. #include "driver-ops.h"
  42. static void ieee80211_free_tid_rx(struct rcu_head *h)
  43. {
  44. struct tid_ampdu_rx *tid_rx =
  45. container_of(h, struct tid_ampdu_rx, rcu_head);
  46. int i;
  47. for (i = 0; i < tid_rx->buf_size; i++)
  48. dev_kfree_skb(tid_rx->reorder_buf[i]);
  49. kfree(tid_rx->reorder_buf);
  50. kfree(tid_rx->reorder_time);
  51. kfree(tid_rx);
  52. }
  53. void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
  54. u16 initiator, u16 reason)
  55. {
  56. struct ieee80211_local *local = sta->local;
  57. struct tid_ampdu_rx *tid_rx;
  58. lockdep_assert_held(&sta->ampdu_mlme.mtx);
  59. tid_rx = sta->ampdu_mlme.tid_rx[tid];
  60. if (!tid_rx)
  61. return;
  62. rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], NULL);
  63. #ifdef CONFIG_MAC80211_HT_DEBUG
  64. printk(KERN_DEBUG "Rx BA session stop requested for %pM tid %u\n",
  65. sta->sta.addr, tid);
  66. #endif /* CONFIG_MAC80211_HT_DEBUG */
  67. if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP,
  68. &sta->sta, tid, NULL))
  69. printk(KERN_DEBUG "HW problem - can not stop rx "
  70. "aggregation for tid %d\n", tid);
  71. /* check if this is a self generated aggregation halt */
  72. if (initiator == WLAN_BACK_RECIPIENT)
  73. ieee80211_send_delba(sta->sdata, sta->sta.addr,
  74. tid, 0, reason);
  75. del_timer_sync(&tid_rx->session_timer);
  76. del_timer_sync(&tid_rx->reorder_timer);
  77. call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx);
  78. }
  79. void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
  80. u16 initiator, u16 reason)
  81. {
  82. mutex_lock(&sta->ampdu_mlme.mtx);
  83. ___ieee80211_stop_rx_ba_session(sta, tid, initiator, reason);
  84. mutex_unlock(&sta->ampdu_mlme.mtx);
  85. }
  86. /*
  87. * After accepting the AddBA Request we activated a timer,
  88. * resetting it after each frame that arrives from the originator.
  89. */
  90. static void sta_rx_agg_session_timer_expired(unsigned long data)
  91. {
  92. /* not an elegant detour, but there is no choice as the timer passes
  93. * only one argument, and various sta_info are needed here, so init
  94. * flow in sta_info_create gives the TID as data, while the timer_to_id
  95. * array gives the sta through container_of */
  96. u8 *ptid = (u8 *)data;
  97. u8 *timer_to_id = ptid - *ptid;
  98. struct sta_info *sta = container_of(timer_to_id, struct sta_info,
  99. timer_to_tid[0]);
  100. #ifdef CONFIG_MAC80211_HT_DEBUG
  101. printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
  102. #endif
  103. set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired);
  104. ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work);
  105. }
  106. static void sta_rx_agg_reorder_timer_expired(unsigned long data)
  107. {
  108. u8 *ptid = (u8 *)data;
  109. u8 *timer_to_id = ptid - *ptid;
  110. struct sta_info *sta = container_of(timer_to_id, struct sta_info,
  111. timer_to_tid[0]);
  112. rcu_read_lock();
  113. spin_lock(&sta->lock);
  114. ieee80211_release_reorder_timeout(sta, *ptid);
  115. spin_unlock(&sta->lock);
  116. rcu_read_unlock();
  117. }
  118. static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid,
  119. u8 dialog_token, u16 status, u16 policy,
  120. u16 buf_size, u16 timeout)
  121. {
  122. struct ieee80211_local *local = sdata->local;
  123. struct sk_buff *skb;
  124. struct ieee80211_mgmt *mgmt;
  125. u16 capab;
  126. skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
  127. if (!skb) {
  128. printk(KERN_DEBUG "%s: failed to allocate buffer "
  129. "for addba resp frame\n", sdata->name);
  130. return;
  131. }
  132. skb_reserve(skb, local->hw.extra_tx_headroom);
  133. mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
  134. memset(mgmt, 0, 24);
  135. memcpy(mgmt->da, da, ETH_ALEN);
  136. memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
  137. if (sdata->vif.type == NL80211_IFTYPE_AP ||
  138. sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
  139. memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
  140. else if (sdata->vif.type == NL80211_IFTYPE_STATION)
  141. memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
  142. mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
  143. IEEE80211_STYPE_ACTION);
  144. skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
  145. mgmt->u.action.category = WLAN_CATEGORY_BACK;
  146. mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP;
  147. mgmt->u.action.u.addba_resp.dialog_token = dialog_token;
  148. capab = (u16)(policy << 1); /* bit 1 aggregation policy */
  149. capab |= (u16)(tid << 2); /* bit 5:2 TID number */
  150. capab |= (u16)(buf_size << 6); /* bit 15:6 max size of aggregation */
  151. mgmt->u.action.u.addba_resp.capab = cpu_to_le16(capab);
  152. mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout);
  153. mgmt->u.action.u.addba_resp.status = cpu_to_le16(status);
  154. ieee80211_tx_skb(sdata, skb);
  155. }
  156. void ieee80211_process_addba_request(struct ieee80211_local *local,
  157. struct sta_info *sta,
  158. struct ieee80211_mgmt *mgmt,
  159. size_t len)
  160. {
  161. struct ieee80211_hw *hw = &local->hw;
  162. struct ieee80211_conf *conf = &hw->conf;
  163. struct tid_ampdu_rx *tid_agg_rx;
  164. u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status;
  165. u8 dialog_token;
  166. int ret = -EOPNOTSUPP;
  167. /* extract session parameters from addba request frame */
  168. dialog_token = mgmt->u.action.u.addba_req.dialog_token;
  169. timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
  170. start_seq_num =
  171. le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4;
  172. capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
  173. ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
  174. tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
  175. buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
  176. status = WLAN_STATUS_REQUEST_DECLINED;
  177. if (test_sta_flags(sta, WLAN_STA_BLOCK_BA)) {
  178. #ifdef CONFIG_MAC80211_HT_DEBUG
  179. printk(KERN_DEBUG "Suspend in progress. "
  180. "Denying ADDBA request\n");
  181. #endif
  182. goto end_no_lock;
  183. }
  184. /* sanity check for incoming parameters:
  185. * check if configuration can support the BA policy
  186. * and if buffer size does not exceeds max value */
  187. /* XXX: check own ht delayed BA capability?? */
  188. if (((ba_policy != 1) &&
  189. (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
  190. (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
  191. status = WLAN_STATUS_INVALID_QOS_PARAM;
  192. #ifdef CONFIG_MAC80211_HT_DEBUG
  193. if (net_ratelimit())
  194. printk(KERN_DEBUG "AddBA Req with bad params from "
  195. "%pM on tid %u. policy %d, buffer size %d\n",
  196. mgmt->sa, tid, ba_policy,
  197. buf_size);
  198. #endif /* CONFIG_MAC80211_HT_DEBUG */
  199. goto end_no_lock;
  200. }
  201. /* determine default buffer size */
  202. if (buf_size == 0) {
  203. struct ieee80211_supported_band *sband;
  204. sband = local->hw.wiphy->bands[conf->channel->band];
  205. buf_size = IEEE80211_MIN_AMPDU_BUF;
  206. buf_size = buf_size << sband->ht_cap.ampdu_factor;
  207. }
  208. /* examine state machine */
  209. mutex_lock(&sta->ampdu_mlme.mtx);
  210. if (sta->ampdu_mlme.tid_rx[tid]) {
  211. #ifdef CONFIG_MAC80211_HT_DEBUG
  212. if (net_ratelimit())
  213. printk(KERN_DEBUG "unexpected AddBA Req from "
  214. "%pM on tid %u\n",
  215. mgmt->sa, tid);
  216. #endif /* CONFIG_MAC80211_HT_DEBUG */
  217. goto end;
  218. }
  219. /* prepare A-MPDU MLME for Rx aggregation */
  220. tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_ATOMIC);
  221. if (!tid_agg_rx) {
  222. #ifdef CONFIG_MAC80211_HT_DEBUG
  223. if (net_ratelimit())
  224. printk(KERN_ERR "allocate rx mlme to tid %d failed\n",
  225. tid);
  226. #endif
  227. goto end;
  228. }
  229. spin_lock_init(&tid_agg_rx->reorder_lock);
  230. /* rx timer */
  231. tid_agg_rx->session_timer.function = sta_rx_agg_session_timer_expired;
  232. tid_agg_rx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid];
  233. init_timer(&tid_agg_rx->session_timer);
  234. /* rx reorder timer */
  235. tid_agg_rx->reorder_timer.function = sta_rx_agg_reorder_timer_expired;
  236. tid_agg_rx->reorder_timer.data = (unsigned long)&sta->timer_to_tid[tid];
  237. init_timer(&tid_agg_rx->reorder_timer);
  238. /* prepare reordering buffer */
  239. tid_agg_rx->reorder_buf =
  240. kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
  241. tid_agg_rx->reorder_time =
  242. kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC);
  243. if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
  244. #ifdef CONFIG_MAC80211_HT_DEBUG
  245. if (net_ratelimit())
  246. printk(KERN_ERR "can not allocate reordering buffer "
  247. "to tid %d\n", tid);
  248. #endif
  249. kfree(tid_agg_rx->reorder_buf);
  250. kfree(tid_agg_rx->reorder_time);
  251. kfree(tid_agg_rx);
  252. goto end;
  253. }
  254. ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START,
  255. &sta->sta, tid, &start_seq_num);
  256. #ifdef CONFIG_MAC80211_HT_DEBUG
  257. printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
  258. #endif /* CONFIG_MAC80211_HT_DEBUG */
  259. if (ret) {
  260. kfree(tid_agg_rx->reorder_buf);
  261. kfree(tid_agg_rx->reorder_time);
  262. kfree(tid_agg_rx);
  263. goto end;
  264. }
  265. /* update data */
  266. tid_agg_rx->dialog_token = dialog_token;
  267. tid_agg_rx->ssn = start_seq_num;
  268. tid_agg_rx->head_seq_num = start_seq_num;
  269. tid_agg_rx->buf_size = buf_size;
  270. tid_agg_rx->timeout = timeout;
  271. tid_agg_rx->stored_mpdu_num = 0;
  272. status = WLAN_STATUS_SUCCESS;
  273. /* activate it for RX */
  274. rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], tid_agg_rx);
  275. if (timeout)
  276. mod_timer(&tid_agg_rx->session_timer, TU_TO_EXP_TIME(timeout));
  277. end:
  278. mutex_unlock(&sta->ampdu_mlme.mtx);
  279. end_no_lock:
  280. ieee80211_send_addba_resp(sta->sdata, sta->sta.addr, tid,
  281. dialog_token, status, 1, buf_size, timeout);
  282. }