init_32.c 6.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254
  1. /*
  2. * PowerPC version
  3. * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  4. *
  5. * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
  6. * and Cort Dougan (PReP) (cort@cs.nmt.edu)
  7. * Copyright (C) 1996 Paul Mackerras
  8. * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
  9. *
  10. * Derived from "arch/i386/mm/init.c"
  11. * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
  12. *
  13. * This program is free software; you can redistribute it and/or
  14. * modify it under the terms of the GNU General Public License
  15. * as published by the Free Software Foundation; either version
  16. * 2 of the License, or (at your option) any later version.
  17. *
  18. */
  19. #include <linux/module.h>
  20. #include <linux/sched.h>
  21. #include <linux/kernel.h>
  22. #include <linux/errno.h>
  23. #include <linux/string.h>
  24. #include <linux/types.h>
  25. #include <linux/mm.h>
  26. #include <linux/stddef.h>
  27. #include <linux/init.h>
  28. #include <linux/bootmem.h>
  29. #include <linux/highmem.h>
  30. #include <linux/initrd.h>
  31. #include <linux/pagemap.h>
  32. #include <linux/memblock.h>
  33. #include <linux/gfp.h>
  34. #include <asm/pgalloc.h>
  35. #include <asm/prom.h>
  36. #include <asm/io.h>
  37. #include <asm/pgtable.h>
  38. #include <asm/mmu.h>
  39. #include <asm/smp.h>
  40. #include <asm/machdep.h>
  41. #include <asm/btext.h>
  42. #include <asm/tlb.h>
  43. #include <asm/sections.h>
  44. #include <asm/system.h>
  45. #include "mmu_decl.h"
  46. #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
  47. /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
  48. #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
  49. #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
  50. #endif
  51. #endif
  52. #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
  53. phys_addr_t total_memory;
  54. phys_addr_t total_lowmem;
  55. phys_addr_t memstart_addr = (phys_addr_t)~0ull;
  56. EXPORT_SYMBOL(memstart_addr);
  57. phys_addr_t kernstart_addr;
  58. EXPORT_SYMBOL(kernstart_addr);
  59. phys_addr_t lowmem_end_addr;
  60. int boot_mapsize;
  61. #ifdef CONFIG_PPC_PMAC
  62. unsigned long agp_special_page;
  63. EXPORT_SYMBOL(agp_special_page);
  64. #endif
  65. void MMU_init(void);
  66. /* XXX should be in current.h -- paulus */
  67. extern struct task_struct *current_set[NR_CPUS];
  68. /*
  69. * this tells the system to map all of ram with the segregs
  70. * (i.e. page tables) instead of the bats.
  71. * -- Cort
  72. */
  73. int __map_without_bats;
  74. int __map_without_ltlbs;
  75. /*
  76. * This tells the system to allow ioremapping memory marked as reserved.
  77. */
  78. int __allow_ioremap_reserved;
  79. /* max amount of low RAM to map in */
  80. unsigned long __max_low_memory = MAX_LOW_MEM;
  81. /*
  82. * address of the limit of what is accessible with initial MMU setup -
  83. * 256MB usually, but only 16MB on 601.
  84. */
  85. phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
  86. /*
  87. * Check for command-line options that affect what MMU_init will do.
  88. */
  89. void MMU_setup(void)
  90. {
  91. /* Check for nobats option (used in mapin_ram). */
  92. if (strstr(cmd_line, "nobats")) {
  93. __map_without_bats = 1;
  94. }
  95. if (strstr(cmd_line, "noltlbs")) {
  96. __map_without_ltlbs = 1;
  97. }
  98. #ifdef CONFIG_DEBUG_PAGEALLOC
  99. __map_without_bats = 1;
  100. __map_without_ltlbs = 1;
  101. #endif
  102. }
  103. /*
  104. * MMU_init sets up the basic memory mappings for the kernel,
  105. * including both RAM and possibly some I/O regions,
  106. * and sets up the page tables and the MMU hardware ready to go.
  107. */
  108. void __init MMU_init(void)
  109. {
  110. if (ppc_md.progress)
  111. ppc_md.progress("MMU:enter", 0x111);
  112. /* 601 can only access 16MB at the moment */
  113. if (PVR_VER(mfspr(SPRN_PVR)) == 1)
  114. __initial_memory_limit_addr = 0x01000000;
  115. /* 8xx can only access 8MB at the moment */
  116. if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
  117. __initial_memory_limit_addr = 0x00800000;
  118. /* parse args from command line */
  119. MMU_setup();
  120. if (memblock.memory.cnt > 1) {
  121. #ifndef CONFIG_WII
  122. memblock.memory.cnt = 1;
  123. memblock_analyze();
  124. printk(KERN_WARNING "Only using first contiguous memory region");
  125. #else
  126. wii_memory_fixups();
  127. #endif
  128. }
  129. total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
  130. lowmem_end_addr = memstart_addr + total_lowmem;
  131. #ifdef CONFIG_FSL_BOOKE
  132. /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
  133. * entries, so we need to adjust lowmem to match the amount we can map
  134. * in the fixed entries */
  135. adjust_total_lowmem();
  136. #endif /* CONFIG_FSL_BOOKE */
  137. if (total_lowmem > __max_low_memory) {
  138. total_lowmem = __max_low_memory;
  139. lowmem_end_addr = memstart_addr + total_lowmem;
  140. #ifndef CONFIG_HIGHMEM
  141. total_memory = total_lowmem;
  142. memblock_enforce_memory_limit(lowmem_end_addr);
  143. memblock_analyze();
  144. #endif /* CONFIG_HIGHMEM */
  145. }
  146. /* Initialize the MMU hardware */
  147. if (ppc_md.progress)
  148. ppc_md.progress("MMU:hw init", 0x300);
  149. MMU_init_hw();
  150. /* Map in all of RAM starting at KERNELBASE */
  151. if (ppc_md.progress)
  152. ppc_md.progress("MMU:mapin", 0x301);
  153. mapin_ram();
  154. /* Initialize early top-down ioremap allocator */
  155. ioremap_bot = IOREMAP_TOP;
  156. /* Map in I/O resources */
  157. if (ppc_md.progress)
  158. ppc_md.progress("MMU:setio", 0x302);
  159. if (ppc_md.progress)
  160. ppc_md.progress("MMU:exit", 0x211);
  161. /* From now on, btext is no longer BAT mapped if it was at all */
  162. #ifdef CONFIG_BOOTX_TEXT
  163. btext_unmap();
  164. #endif
  165. }
  166. /* This is only called until mem_init is done. */
  167. void __init *early_get_page(void)
  168. {
  169. void *p;
  170. if (init_bootmem_done) {
  171. p = alloc_bootmem_pages(PAGE_SIZE);
  172. } else {
  173. p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
  174. __initial_memory_limit_addr));
  175. }
  176. return p;
  177. }
  178. /* Free up now-unused memory */
  179. static void free_sec(unsigned long start, unsigned long end, const char *name)
  180. {
  181. unsigned long cnt = 0;
  182. while (start < end) {
  183. ClearPageReserved(virt_to_page(start));
  184. init_page_count(virt_to_page(start));
  185. free_page(start);
  186. cnt++;
  187. start += PAGE_SIZE;
  188. }
  189. if (cnt) {
  190. printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
  191. totalram_pages += cnt;
  192. }
  193. }
  194. void free_initmem(void)
  195. {
  196. #define FREESEC(TYPE) \
  197. free_sec((unsigned long)(&__ ## TYPE ## _begin), \
  198. (unsigned long)(&__ ## TYPE ## _end), \
  199. #TYPE);
  200. printk ("Freeing unused kernel memory:");
  201. FREESEC(init);
  202. printk("\n");
  203. ppc_md.progress = NULL;
  204. #undef FREESEC
  205. }
  206. #ifdef CONFIG_BLK_DEV_INITRD
  207. void free_initrd_mem(unsigned long start, unsigned long end)
  208. {
  209. if (start < end)
  210. printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
  211. for (; start < end; start += PAGE_SIZE) {
  212. ClearPageReserved(virt_to_page(start));
  213. init_page_count(virt_to_page(start));
  214. free_page(start);
  215. totalram_pages++;
  216. }
  217. }
  218. #endif