rt2500pci.c 60 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983
  1. /*
  2. Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
  3. <http://rt2x00.serialmonkey.com>
  4. This program is free software; you can redistribute it and/or modify
  5. it under the terms of the GNU General Public License as published by
  6. the Free Software Foundation; either version 2 of the License, or
  7. (at your option) any later version.
  8. This program is distributed in the hope that it will be useful,
  9. but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11. GNU General Public License for more details.
  12. You should have received a copy of the GNU General Public License
  13. along with this program; if not, write to the
  14. Free Software Foundation, Inc.,
  15. 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  16. */
  17. /*
  18. Module: rt2500pci
  19. Abstract: rt2500pci device specific routines.
  20. Supported chipsets: RT2560.
  21. */
  22. #include <linux/delay.h>
  23. #include <linux/etherdevice.h>
  24. #include <linux/init.h>
  25. #include <linux/kernel.h>
  26. #include <linux/module.h>
  27. #include <linux/pci.h>
  28. #include <linux/eeprom_93cx6.h>
  29. #include "rt2x00.h"
  30. #include "rt2x00pci.h"
  31. #include "rt2500pci.h"
  32. /*
  33. * Register access.
  34. * All access to the CSR registers will go through the methods
  35. * rt2x00pci_register_read and rt2x00pci_register_write.
  36. * BBP and RF register require indirect register access,
  37. * and use the CSR registers BBPCSR and RFCSR to achieve this.
  38. * These indirect registers work with busy bits,
  39. * and we will try maximal REGISTER_BUSY_COUNT times to access
  40. * the register while taking a REGISTER_BUSY_DELAY us delay
  41. * between each attampt. When the busy bit is still set at that time,
  42. * the access attempt is considered to have failed,
  43. * and we will print an error.
  44. */
  45. static u32 rt2500pci_bbp_check(struct rt2x00_dev *rt2x00dev)
  46. {
  47. u32 reg;
  48. unsigned int i;
  49. for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  50. rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
  51. if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
  52. break;
  53. udelay(REGISTER_BUSY_DELAY);
  54. }
  55. return reg;
  56. }
  57. static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  58. const unsigned int word, const u8 value)
  59. {
  60. u32 reg;
  61. /*
  62. * Wait until the BBP becomes ready.
  63. */
  64. reg = rt2500pci_bbp_check(rt2x00dev);
  65. if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
  66. ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
  67. return;
  68. }
  69. /*
  70. * Write the data into the BBP.
  71. */
  72. reg = 0;
  73. rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
  74. rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  75. rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  76. rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
  77. rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  78. }
  79. static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  80. const unsigned int word, u8 *value)
  81. {
  82. u32 reg;
  83. /*
  84. * Wait until the BBP becomes ready.
  85. */
  86. reg = rt2500pci_bbp_check(rt2x00dev);
  87. if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
  88. ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
  89. return;
  90. }
  91. /*
  92. * Write the request into the BBP.
  93. */
  94. reg = 0;
  95. rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  96. rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  97. rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
  98. rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  99. /*
  100. * Wait until the BBP becomes ready.
  101. */
  102. reg = rt2500pci_bbp_check(rt2x00dev);
  103. if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
  104. ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
  105. *value = 0xff;
  106. return;
  107. }
  108. *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
  109. }
  110. static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
  111. const unsigned int word, const u32 value)
  112. {
  113. u32 reg;
  114. unsigned int i;
  115. if (!word)
  116. return;
  117. for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  118. rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
  119. if (!rt2x00_get_field32(reg, RFCSR_BUSY))
  120. goto rf_write;
  121. udelay(REGISTER_BUSY_DELAY);
  122. }
  123. ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
  124. return;
  125. rf_write:
  126. reg = 0;
  127. rt2x00_set_field32(&reg, RFCSR_VALUE, value);
  128. rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
  129. rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
  130. rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
  131. rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
  132. rt2x00_rf_write(rt2x00dev, word, value);
  133. }
  134. static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
  135. {
  136. struct rt2x00_dev *rt2x00dev = eeprom->data;
  137. u32 reg;
  138. rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
  139. eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
  140. eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
  141. eeprom->reg_data_clock =
  142. !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
  143. eeprom->reg_chip_select =
  144. !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
  145. }
  146. static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
  147. {
  148. struct rt2x00_dev *rt2x00dev = eeprom->data;
  149. u32 reg = 0;
  150. rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
  151. rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
  152. rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
  153. !!eeprom->reg_data_clock);
  154. rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
  155. !!eeprom->reg_chip_select);
  156. rt2x00pci_register_write(rt2x00dev, CSR21, reg);
  157. }
  158. #ifdef CONFIG_RT2X00_LIB_DEBUGFS
  159. #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
  160. static void rt2500pci_read_csr(struct rt2x00_dev *rt2x00dev,
  161. const unsigned int word, u32 *data)
  162. {
  163. rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
  164. }
  165. static void rt2500pci_write_csr(struct rt2x00_dev *rt2x00dev,
  166. const unsigned int word, u32 data)
  167. {
  168. rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
  169. }
  170. static const struct rt2x00debug rt2500pci_rt2x00debug = {
  171. .owner = THIS_MODULE,
  172. .csr = {
  173. .read = rt2500pci_read_csr,
  174. .write = rt2500pci_write_csr,
  175. .word_size = sizeof(u32),
  176. .word_count = CSR_REG_SIZE / sizeof(u32),
  177. },
  178. .eeprom = {
  179. .read = rt2x00_eeprom_read,
  180. .write = rt2x00_eeprom_write,
  181. .word_size = sizeof(u16),
  182. .word_count = EEPROM_SIZE / sizeof(u16),
  183. },
  184. .bbp = {
  185. .read = rt2500pci_bbp_read,
  186. .write = rt2500pci_bbp_write,
  187. .word_size = sizeof(u8),
  188. .word_count = BBP_SIZE / sizeof(u8),
  189. },
  190. .rf = {
  191. .read = rt2x00_rf_read,
  192. .write = rt2500pci_rf_write,
  193. .word_size = sizeof(u32),
  194. .word_count = RF_SIZE / sizeof(u32),
  195. },
  196. };
  197. #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
  198. #ifdef CONFIG_RT2500PCI_RFKILL
  199. static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
  200. {
  201. u32 reg;
  202. rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
  203. return rt2x00_get_field32(reg, GPIOCSR_BIT0);
  204. }
  205. #else
  206. #define rt2500pci_rfkill_poll NULL
  207. #endif /* CONFIG_RT2500PCI_RFKILL */
  208. #ifdef CONFIG_RT2500PCI_LEDS
  209. static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
  210. enum led_brightness brightness)
  211. {
  212. struct rt2x00_led *led =
  213. container_of(led_cdev, struct rt2x00_led, led_dev);
  214. unsigned int enabled = brightness != LED_OFF;
  215. u32 reg;
  216. rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
  217. if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
  218. rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
  219. else if (led->type == LED_TYPE_ACTIVITY)
  220. rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled);
  221. rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
  222. }
  223. static int rt2500pci_blink_set(struct led_classdev *led_cdev,
  224. unsigned long *delay_on,
  225. unsigned long *delay_off)
  226. {
  227. struct rt2x00_led *led =
  228. container_of(led_cdev, struct rt2x00_led, led_dev);
  229. u32 reg;
  230. rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
  231. rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, *delay_on);
  232. rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, *delay_off);
  233. rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
  234. return 0;
  235. }
  236. static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev,
  237. struct rt2x00_led *led,
  238. enum led_type type)
  239. {
  240. led->rt2x00dev = rt2x00dev;
  241. led->type = type;
  242. led->led_dev.brightness_set = rt2500pci_brightness_set;
  243. led->led_dev.blink_set = rt2500pci_blink_set;
  244. led->flags = LED_INITIALIZED;
  245. }
  246. #endif /* CONFIG_RT2500PCI_LEDS */
  247. /*
  248. * Configuration handlers.
  249. */
  250. static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev,
  251. const unsigned int filter_flags)
  252. {
  253. u32 reg;
  254. /*
  255. * Start configuration steps.
  256. * Note that the version error will always be dropped
  257. * and broadcast frames will always be accepted since
  258. * there is no filter for it at this time.
  259. */
  260. rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
  261. rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
  262. !(filter_flags & FIF_FCSFAIL));
  263. rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
  264. !(filter_flags & FIF_PLCPFAIL));
  265. rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
  266. !(filter_flags & FIF_CONTROL));
  267. rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
  268. !(filter_flags & FIF_PROMISC_IN_BSS));
  269. rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
  270. !(filter_flags & FIF_PROMISC_IN_BSS) &&
  271. !rt2x00dev->intf_ap_count);
  272. rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
  273. rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
  274. !(filter_flags & FIF_ALLMULTI));
  275. rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
  276. rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
  277. }
  278. static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
  279. struct rt2x00_intf *intf,
  280. struct rt2x00intf_conf *conf,
  281. const unsigned int flags)
  282. {
  283. struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON);
  284. unsigned int bcn_preload;
  285. u32 reg;
  286. if (flags & CONFIG_UPDATE_TYPE) {
  287. /*
  288. * Enable beacon config
  289. */
  290. bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
  291. rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
  292. rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
  293. rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN, queue->cw_min);
  294. rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
  295. /*
  296. * Enable synchronisation.
  297. */
  298. rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
  299. rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
  300. rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
  301. rt2x00_set_field32(&reg, CSR14_TBCN, 1);
  302. rt2x00pci_register_write(rt2x00dev, CSR14, reg);
  303. }
  304. if (flags & CONFIG_UPDATE_MAC)
  305. rt2x00pci_register_multiwrite(rt2x00dev, CSR3,
  306. conf->mac, sizeof(conf->mac));
  307. if (flags & CONFIG_UPDATE_BSSID)
  308. rt2x00pci_register_multiwrite(rt2x00dev, CSR5,
  309. conf->bssid, sizeof(conf->bssid));
  310. }
  311. static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
  312. struct rt2x00lib_erp *erp)
  313. {
  314. int preamble_mask;
  315. u32 reg;
  316. /*
  317. * When short preamble is enabled, we should set bit 0x08
  318. */
  319. preamble_mask = erp->short_preamble << 3;
  320. rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
  321. rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
  322. erp->ack_timeout);
  323. rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
  324. erp->ack_consume_time);
  325. rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
  326. rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
  327. rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00);
  328. rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
  329. rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
  330. rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
  331. rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
  332. rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
  333. rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
  334. rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
  335. rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
  336. rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
  337. rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
  338. rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
  339. rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
  340. rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
  341. rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
  342. rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
  343. rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
  344. rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
  345. rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
  346. }
  347. static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev,
  348. const int basic_rate_mask)
  349. {
  350. rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask);
  351. }
  352. static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
  353. struct rf_channel *rf, const int txpower)
  354. {
  355. u8 r70;
  356. /*
  357. * Set TXpower.
  358. */
  359. rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
  360. /*
  361. * Switch on tuning bits.
  362. * For RT2523 devices we do not need to update the R1 register.
  363. */
  364. if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
  365. rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
  366. rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
  367. /*
  368. * For RT2525 we should first set the channel to half band higher.
  369. */
  370. if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
  371. static const u32 vals[] = {
  372. 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
  373. 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
  374. 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
  375. 0x00080d2e, 0x00080d3a
  376. };
  377. rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
  378. rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
  379. rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
  380. if (rf->rf4)
  381. rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
  382. }
  383. rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
  384. rt2500pci_rf_write(rt2x00dev, 2, rf->rf2);
  385. rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
  386. if (rf->rf4)
  387. rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
  388. /*
  389. * Channel 14 requires the Japan filter bit to be set.
  390. */
  391. r70 = 0x46;
  392. rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14);
  393. rt2500pci_bbp_write(rt2x00dev, 70, r70);
  394. msleep(1);
  395. /*
  396. * Switch off tuning bits.
  397. * For RT2523 devices we do not need to update the R1 register.
  398. */
  399. if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
  400. rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
  401. rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
  402. }
  403. rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
  404. rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
  405. /*
  406. * Clear false CRC during channel switch.
  407. */
  408. rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
  409. }
  410. static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
  411. const int txpower)
  412. {
  413. u32 rf3;
  414. rt2x00_rf_read(rt2x00dev, 3, &rf3);
  415. rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
  416. rt2500pci_rf_write(rt2x00dev, 3, rf3);
  417. }
  418. static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
  419. struct antenna_setup *ant)
  420. {
  421. u32 reg;
  422. u8 r14;
  423. u8 r2;
  424. /*
  425. * We should never come here because rt2x00lib is supposed
  426. * to catch this and send us the correct antenna explicitely.
  427. */
  428. BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
  429. ant->tx == ANTENNA_SW_DIVERSITY);
  430. rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
  431. rt2500pci_bbp_read(rt2x00dev, 14, &r14);
  432. rt2500pci_bbp_read(rt2x00dev, 2, &r2);
  433. /*
  434. * Configure the TX antenna.
  435. */
  436. switch (ant->tx) {
  437. case ANTENNA_A:
  438. rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
  439. rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
  440. rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
  441. break;
  442. case ANTENNA_B:
  443. default:
  444. rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
  445. rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
  446. rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
  447. break;
  448. }
  449. /*
  450. * Configure the RX antenna.
  451. */
  452. switch (ant->rx) {
  453. case ANTENNA_A:
  454. rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
  455. break;
  456. case ANTENNA_B:
  457. default:
  458. rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
  459. break;
  460. }
  461. /*
  462. * RT2525E and RT5222 need to flip TX I/Q
  463. */
  464. if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
  465. rt2x00_rf(&rt2x00dev->chip, RF5222)) {
  466. rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
  467. rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
  468. rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
  469. /*
  470. * RT2525E does not need RX I/Q Flip.
  471. */
  472. if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
  473. rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
  474. } else {
  475. rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
  476. rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
  477. }
  478. rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
  479. rt2500pci_bbp_write(rt2x00dev, 14, r14);
  480. rt2500pci_bbp_write(rt2x00dev, 2, r2);
  481. }
  482. static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
  483. struct rt2x00lib_conf *libconf)
  484. {
  485. u32 reg;
  486. rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
  487. rt2x00_set_field32(&reg, CSR11_SLOT_TIME, libconf->slot_time);
  488. rt2x00pci_register_write(rt2x00dev, CSR11, reg);
  489. rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
  490. rt2x00_set_field32(&reg, CSR18_SIFS, libconf->sifs);
  491. rt2x00_set_field32(&reg, CSR18_PIFS, libconf->pifs);
  492. rt2x00pci_register_write(rt2x00dev, CSR18, reg);
  493. rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
  494. rt2x00_set_field32(&reg, CSR19_DIFS, libconf->difs);
  495. rt2x00_set_field32(&reg, CSR19_EIFS, libconf->eifs);
  496. rt2x00pci_register_write(rt2x00dev, CSR19, reg);
  497. rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
  498. rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
  499. rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
  500. rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
  501. rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
  502. rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
  503. libconf->conf->beacon_int * 16);
  504. rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
  505. libconf->conf->beacon_int * 16);
  506. rt2x00pci_register_write(rt2x00dev, CSR12, reg);
  507. }
  508. static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
  509. struct rt2x00lib_conf *libconf,
  510. const unsigned int flags)
  511. {
  512. if (flags & CONFIG_UPDATE_PHYMODE)
  513. rt2500pci_config_phymode(rt2x00dev, libconf->basic_rates);
  514. if (flags & CONFIG_UPDATE_CHANNEL)
  515. rt2500pci_config_channel(rt2x00dev, &libconf->rf,
  516. libconf->conf->power_level);
  517. if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
  518. rt2500pci_config_txpower(rt2x00dev,
  519. libconf->conf->power_level);
  520. if (flags & CONFIG_UPDATE_ANTENNA)
  521. rt2500pci_config_antenna(rt2x00dev, &libconf->ant);
  522. if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
  523. rt2500pci_config_duration(rt2x00dev, libconf);
  524. }
  525. /*
  526. * Link tuning
  527. */
  528. static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev,
  529. struct link_qual *qual)
  530. {
  531. u32 reg;
  532. /*
  533. * Update FCS error count from register.
  534. */
  535. rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
  536. qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
  537. /*
  538. * Update False CCA count from register.
  539. */
  540. rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
  541. qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
  542. }
  543. static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
  544. {
  545. rt2500pci_bbp_write(rt2x00dev, 17, 0x48);
  546. rt2x00dev->link.vgc_level = 0x48;
  547. }
  548. static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev)
  549. {
  550. int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
  551. u8 r17;
  552. /*
  553. * To prevent collisions with MAC ASIC on chipsets
  554. * up to version C the link tuning should halt after 20
  555. * seconds while being associated.
  556. */
  557. if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
  558. rt2x00dev->intf_associated &&
  559. rt2x00dev->link.count > 20)
  560. return;
  561. rt2500pci_bbp_read(rt2x00dev, 17, &r17);
  562. /*
  563. * Chipset versions C and lower should directly continue
  564. * to the dynamic CCA tuning. Chipset version D and higher
  565. * should go straight to dynamic CCA tuning when they
  566. * are not associated.
  567. */
  568. if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
  569. !rt2x00dev->intf_associated)
  570. goto dynamic_cca_tune;
  571. /*
  572. * A too low RSSI will cause too much false CCA which will
  573. * then corrupt the R17 tuning. To remidy this the tuning should
  574. * be stopped (While making sure the R17 value will not exceed limits)
  575. */
  576. if (rssi < -80 && rt2x00dev->link.count > 20) {
  577. if (r17 >= 0x41) {
  578. r17 = rt2x00dev->link.vgc_level;
  579. rt2500pci_bbp_write(rt2x00dev, 17, r17);
  580. }
  581. return;
  582. }
  583. /*
  584. * Special big-R17 for short distance
  585. */
  586. if (rssi >= -58) {
  587. if (r17 != 0x50)
  588. rt2500pci_bbp_write(rt2x00dev, 17, 0x50);
  589. return;
  590. }
  591. /*
  592. * Special mid-R17 for middle distance
  593. */
  594. if (rssi >= -74) {
  595. if (r17 != 0x41)
  596. rt2500pci_bbp_write(rt2x00dev, 17, 0x41);
  597. return;
  598. }
  599. /*
  600. * Leave short or middle distance condition, restore r17
  601. * to the dynamic tuning range.
  602. */
  603. if (r17 >= 0x41) {
  604. rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level);
  605. return;
  606. }
  607. dynamic_cca_tune:
  608. /*
  609. * R17 is inside the dynamic tuning range,
  610. * start tuning the link based on the false cca counter.
  611. */
  612. if (rt2x00dev->link.qual.false_cca > 512 && r17 < 0x40) {
  613. rt2500pci_bbp_write(rt2x00dev, 17, ++r17);
  614. rt2x00dev->link.vgc_level = r17;
  615. } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > 0x32) {
  616. rt2500pci_bbp_write(rt2x00dev, 17, --r17);
  617. rt2x00dev->link.vgc_level = r17;
  618. }
  619. }
  620. /*
  621. * Initialization functions.
  622. */
  623. static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
  624. struct queue_entry *entry)
  625. {
  626. struct queue_entry_priv_pci *entry_priv = entry->priv_data;
  627. u32 word;
  628. rt2x00_desc_read(entry_priv->desc, 1, &word);
  629. rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
  630. rt2x00_desc_write(entry_priv->desc, 1, word);
  631. rt2x00_desc_read(entry_priv->desc, 0, &word);
  632. rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
  633. rt2x00_desc_write(entry_priv->desc, 0, word);
  634. }
  635. static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev,
  636. struct queue_entry *entry)
  637. {
  638. struct queue_entry_priv_pci *entry_priv = entry->priv_data;
  639. u32 word;
  640. rt2x00_desc_read(entry_priv->desc, 0, &word);
  641. rt2x00_set_field32(&word, TXD_W0_VALID, 0);
  642. rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
  643. rt2x00_desc_write(entry_priv->desc, 0, word);
  644. }
  645. static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
  646. {
  647. struct queue_entry_priv_pci *entry_priv;
  648. u32 reg;
  649. /*
  650. * Initialize registers.
  651. */
  652. rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
  653. rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
  654. rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
  655. rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit);
  656. rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
  657. rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
  658. entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
  659. rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
  660. rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
  661. entry_priv->desc_dma);
  662. rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
  663. entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
  664. rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
  665. rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
  666. entry_priv->desc_dma);
  667. rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
  668. entry_priv = rt2x00dev->bcn[1].entries[0].priv_data;
  669. rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
  670. rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
  671. entry_priv->desc_dma);
  672. rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
  673. entry_priv = rt2x00dev->bcn[0].entries[0].priv_data;
  674. rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
  675. rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
  676. entry_priv->desc_dma);
  677. rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
  678. rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
  679. rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
  680. rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
  681. rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
  682. entry_priv = rt2x00dev->rx->entries[0].priv_data;
  683. rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
  684. rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
  685. entry_priv->desc_dma);
  686. rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
  687. return 0;
  688. }
  689. static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
  690. {
  691. u32 reg;
  692. rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
  693. rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
  694. rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
  695. rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
  696. rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
  697. rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
  698. rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
  699. rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
  700. rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
  701. rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
  702. rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
  703. rt2x00dev->rx->data_size / 128);
  704. rt2x00pci_register_write(rt2x00dev, CSR9, reg);
  705. /*
  706. * Always use CWmin and CWmax set in descriptor.
  707. */
  708. rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
  709. rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
  710. rt2x00pci_register_write(rt2x00dev, CSR11, reg);
  711. rt2x00pci_register_write(rt2x00dev, CNT3, 0);
  712. rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
  713. rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
  714. rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
  715. rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
  716. rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
  717. rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
  718. rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
  719. rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
  720. rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
  721. rt2x00pci_register_write(rt2x00dev, TXCSR8, reg);
  722. rt2x00pci_register_read(rt2x00dev, ARTCSR0, &reg);
  723. rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
  724. rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
  725. rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
  726. rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
  727. rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg);
  728. rt2x00pci_register_read(rt2x00dev, ARTCSR1, &reg);
  729. rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
  730. rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
  731. rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
  732. rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
  733. rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg);
  734. rt2x00pci_register_read(rt2x00dev, ARTCSR2, &reg);
  735. rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
  736. rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
  737. rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
  738. rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
  739. rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg);
  740. rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
  741. rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
  742. rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
  743. rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
  744. rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
  745. rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
  746. rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
  747. rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
  748. rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
  749. rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
  750. rt2x00pci_register_read(rt2x00dev, PCICSR, &reg);
  751. rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
  752. rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
  753. rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
  754. rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
  755. rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
  756. rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
  757. rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
  758. rt2x00pci_register_write(rt2x00dev, PCICSR, reg);
  759. rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
  760. rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
  761. rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
  762. if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
  763. return -EBUSY;
  764. rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
  765. rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
  766. rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
  767. rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
  768. rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
  769. rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
  770. rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
  771. rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
  772. rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
  773. rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
  774. rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
  775. rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
  776. rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
  777. rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
  778. rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
  779. rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
  780. rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
  781. rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
  782. rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
  783. rt2x00pci_register_write(rt2x00dev, CSR1, reg);
  784. rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
  785. rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
  786. rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
  787. rt2x00pci_register_write(rt2x00dev, CSR1, reg);
  788. /*
  789. * We must clear the FCS and FIFO error count.
  790. * These registers are cleared on read,
  791. * so we may pass a useless variable to store the value.
  792. */
  793. rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
  794. rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
  795. return 0;
  796. }
  797. static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
  798. {
  799. unsigned int i;
  800. u8 value;
  801. for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  802. rt2500pci_bbp_read(rt2x00dev, 0, &value);
  803. if ((value != 0xff) && (value != 0x00))
  804. return 0;
  805. udelay(REGISTER_BUSY_DELAY);
  806. }
  807. ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
  808. return -EACCES;
  809. }
  810. static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
  811. {
  812. unsigned int i;
  813. u16 eeprom;
  814. u8 reg_id;
  815. u8 value;
  816. if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev)))
  817. return -EACCES;
  818. rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
  819. rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
  820. rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
  821. rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
  822. rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
  823. rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
  824. rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
  825. rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
  826. rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
  827. rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
  828. rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
  829. rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
  830. rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
  831. rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
  832. rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
  833. rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
  834. rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
  835. rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
  836. rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
  837. rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
  838. rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
  839. rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
  840. rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
  841. rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
  842. rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
  843. rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
  844. rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
  845. rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
  846. rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
  847. rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
  848. for (i = 0; i < EEPROM_BBP_SIZE; i++) {
  849. rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
  850. if (eeprom != 0xffff && eeprom != 0x0000) {
  851. reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
  852. value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
  853. rt2500pci_bbp_write(rt2x00dev, reg_id, value);
  854. }
  855. }
  856. return 0;
  857. }
  858. /*
  859. * Device state switch handlers.
  860. */
  861. static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
  862. enum dev_state state)
  863. {
  864. u32 reg;
  865. rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
  866. rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
  867. (state == STATE_RADIO_RX_OFF) ||
  868. (state == STATE_RADIO_RX_OFF_LINK));
  869. rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
  870. }
  871. static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
  872. enum dev_state state)
  873. {
  874. int mask = (state == STATE_RADIO_IRQ_OFF);
  875. u32 reg;
  876. /*
  877. * When interrupts are being enabled, the interrupt registers
  878. * should clear the register to assure a clean state.
  879. */
  880. if (state == STATE_RADIO_IRQ_ON) {
  881. rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
  882. rt2x00pci_register_write(rt2x00dev, CSR7, reg);
  883. }
  884. /*
  885. * Only toggle the interrupts bits we are going to use.
  886. * Non-checked interrupt bits are disabled by default.
  887. */
  888. rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
  889. rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
  890. rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
  891. rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
  892. rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
  893. rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
  894. rt2x00pci_register_write(rt2x00dev, CSR8, reg);
  895. }
  896. static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
  897. {
  898. /*
  899. * Initialize all registers.
  900. */
  901. if (unlikely(rt2500pci_init_queues(rt2x00dev) ||
  902. rt2500pci_init_registers(rt2x00dev) ||
  903. rt2500pci_init_bbp(rt2x00dev)))
  904. return -EIO;
  905. return 0;
  906. }
  907. static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
  908. {
  909. u32 reg;
  910. rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
  911. /*
  912. * Disable synchronisation.
  913. */
  914. rt2x00pci_register_write(rt2x00dev, CSR14, 0);
  915. /*
  916. * Cancel RX and TX.
  917. */
  918. rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
  919. rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
  920. rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
  921. }
  922. static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
  923. enum dev_state state)
  924. {
  925. u32 reg;
  926. unsigned int i;
  927. char put_to_sleep;
  928. char bbp_state;
  929. char rf_state;
  930. put_to_sleep = (state != STATE_AWAKE);
  931. rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
  932. rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
  933. rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
  934. rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
  935. rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
  936. rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
  937. /*
  938. * Device is not guaranteed to be in the requested state yet.
  939. * We must wait until the register indicates that the
  940. * device has entered the correct state.
  941. */
  942. for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  943. rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
  944. bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
  945. rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
  946. if (bbp_state == state && rf_state == state)
  947. return 0;
  948. msleep(10);
  949. }
  950. return -EBUSY;
  951. }
  952. static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
  953. enum dev_state state)
  954. {
  955. int retval = 0;
  956. switch (state) {
  957. case STATE_RADIO_ON:
  958. retval = rt2500pci_enable_radio(rt2x00dev);
  959. break;
  960. case STATE_RADIO_OFF:
  961. rt2500pci_disable_radio(rt2x00dev);
  962. break;
  963. case STATE_RADIO_RX_ON:
  964. case STATE_RADIO_RX_ON_LINK:
  965. case STATE_RADIO_RX_OFF:
  966. case STATE_RADIO_RX_OFF_LINK:
  967. rt2500pci_toggle_rx(rt2x00dev, state);
  968. break;
  969. case STATE_RADIO_IRQ_ON:
  970. case STATE_RADIO_IRQ_OFF:
  971. rt2500pci_toggle_irq(rt2x00dev, state);
  972. break;
  973. case STATE_DEEP_SLEEP:
  974. case STATE_SLEEP:
  975. case STATE_STANDBY:
  976. case STATE_AWAKE:
  977. retval = rt2500pci_set_state(rt2x00dev, state);
  978. break;
  979. default:
  980. retval = -ENOTSUPP;
  981. break;
  982. }
  983. if (unlikely(retval))
  984. ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
  985. state, retval);
  986. return retval;
  987. }
  988. /*
  989. * TX descriptor initialization
  990. */
  991. static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
  992. struct sk_buff *skb,
  993. struct txentry_desc *txdesc)
  994. {
  995. struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
  996. struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
  997. __le32 *txd = skbdesc->desc;
  998. u32 word;
  999. /*
  1000. * Start writing the descriptor words.
  1001. */
  1002. rt2x00_desc_read(entry_priv->desc, 1, &word);
  1003. rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
  1004. rt2x00_desc_write(entry_priv->desc, 1, word);
  1005. rt2x00_desc_read(txd, 2, &word);
  1006. rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
  1007. rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs);
  1008. rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min);
  1009. rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max);
  1010. rt2x00_desc_write(txd, 2, word);
  1011. rt2x00_desc_read(txd, 3, &word);
  1012. rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal);
  1013. rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service);
  1014. rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, txdesc->length_low);
  1015. rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, txdesc->length_high);
  1016. rt2x00_desc_write(txd, 3, word);
  1017. rt2x00_desc_read(txd, 10, &word);
  1018. rt2x00_set_field32(&word, TXD_W10_RTS,
  1019. test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
  1020. rt2x00_desc_write(txd, 10, word);
  1021. rt2x00_desc_read(txd, 0, &word);
  1022. rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
  1023. rt2x00_set_field32(&word, TXD_W0_VALID, 1);
  1024. rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
  1025. test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
  1026. rt2x00_set_field32(&word, TXD_W0_ACK,
  1027. test_bit(ENTRY_TXD_ACK, &txdesc->flags));
  1028. rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
  1029. test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
  1030. rt2x00_set_field32(&word, TXD_W0_OFDM,
  1031. test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
  1032. rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
  1033. rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
  1034. rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
  1035. test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
  1036. rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
  1037. rt2x00_desc_write(txd, 0, word);
  1038. }
  1039. /*
  1040. * TX data initialization
  1041. */
  1042. static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
  1043. const enum data_queue_qid queue)
  1044. {
  1045. u32 reg;
  1046. if (queue == QID_BEACON) {
  1047. rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
  1048. if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
  1049. rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
  1050. rt2x00_set_field32(&reg, CSR14_TBCN, 1);
  1051. rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
  1052. rt2x00pci_register_write(rt2x00dev, CSR14, reg);
  1053. }
  1054. return;
  1055. }
  1056. rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
  1057. rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
  1058. rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue == QID_AC_BK));
  1059. rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, (queue == QID_ATIM));
  1060. rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
  1061. }
  1062. /*
  1063. * RX control handlers
  1064. */
  1065. static void rt2500pci_fill_rxdone(struct queue_entry *entry,
  1066. struct rxdone_entry_desc *rxdesc)
  1067. {
  1068. struct queue_entry_priv_pci *entry_priv = entry->priv_data;
  1069. u32 word0;
  1070. u32 word2;
  1071. rt2x00_desc_read(entry_priv->desc, 0, &word0);
  1072. rt2x00_desc_read(entry_priv->desc, 2, &word2);
  1073. if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
  1074. rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
  1075. if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
  1076. rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
  1077. /*
  1078. * Obtain the status about this packet.
  1079. * When frame was received with an OFDM bitrate,
  1080. * the signal is the PLCP value. If it was received with
  1081. * a CCK bitrate the signal is the rate in 100kbit/s.
  1082. */
  1083. rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
  1084. rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
  1085. entry->queue->rt2x00dev->rssi_offset;
  1086. rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
  1087. if (rt2x00_get_field32(word0, RXD_W0_OFDM))
  1088. rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
  1089. if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
  1090. rxdesc->dev_flags |= RXDONE_MY_BSS;
  1091. }
  1092. /*
  1093. * Interrupt functions.
  1094. */
  1095. static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
  1096. const enum data_queue_qid queue_idx)
  1097. {
  1098. struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
  1099. struct queue_entry_priv_pci *entry_priv;
  1100. struct queue_entry *entry;
  1101. struct txdone_entry_desc txdesc;
  1102. u32 word;
  1103. while (!rt2x00queue_empty(queue)) {
  1104. entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
  1105. entry_priv = entry->priv_data;
  1106. rt2x00_desc_read(entry_priv->desc, 0, &word);
  1107. if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
  1108. !rt2x00_get_field32(word, TXD_W0_VALID))
  1109. break;
  1110. /*
  1111. * Obtain the status about this packet.
  1112. */
  1113. txdesc.flags = 0;
  1114. switch (rt2x00_get_field32(word, TXD_W0_RESULT)) {
  1115. case 0: /* Success */
  1116. case 1: /* Success with retry */
  1117. __set_bit(TXDONE_SUCCESS, &txdesc.flags);
  1118. break;
  1119. case 2: /* Failure, excessive retries */
  1120. __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
  1121. /* Don't break, this is a failed frame! */
  1122. default: /* Failure */
  1123. __set_bit(TXDONE_FAILURE, &txdesc.flags);
  1124. }
  1125. txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
  1126. rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
  1127. }
  1128. }
  1129. static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
  1130. {
  1131. struct rt2x00_dev *rt2x00dev = dev_instance;
  1132. u32 reg;
  1133. /*
  1134. * Get the interrupt sources & saved to local variable.
  1135. * Write register value back to clear pending interrupts.
  1136. */
  1137. rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
  1138. rt2x00pci_register_write(rt2x00dev, CSR7, reg);
  1139. if (!reg)
  1140. return IRQ_NONE;
  1141. if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
  1142. return IRQ_HANDLED;
  1143. /*
  1144. * Handle interrupts, walk through all bits
  1145. * and run the tasks, the bits are checked in order of
  1146. * priority.
  1147. */
  1148. /*
  1149. * 1 - Beacon timer expired interrupt.
  1150. */
  1151. if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
  1152. rt2x00lib_beacondone(rt2x00dev);
  1153. /*
  1154. * 2 - Rx ring done interrupt.
  1155. */
  1156. if (rt2x00_get_field32(reg, CSR7_RXDONE))
  1157. rt2x00pci_rxdone(rt2x00dev);
  1158. /*
  1159. * 3 - Atim ring transmit done interrupt.
  1160. */
  1161. if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
  1162. rt2500pci_txdone(rt2x00dev, QID_ATIM);
  1163. /*
  1164. * 4 - Priority ring transmit done interrupt.
  1165. */
  1166. if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
  1167. rt2500pci_txdone(rt2x00dev, QID_AC_BE);
  1168. /*
  1169. * 5 - Tx ring transmit done interrupt.
  1170. */
  1171. if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
  1172. rt2500pci_txdone(rt2x00dev, QID_AC_BK);
  1173. return IRQ_HANDLED;
  1174. }
  1175. /*
  1176. * Device probe functions.
  1177. */
  1178. static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
  1179. {
  1180. struct eeprom_93cx6 eeprom;
  1181. u32 reg;
  1182. u16 word;
  1183. u8 *mac;
  1184. rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
  1185. eeprom.data = rt2x00dev;
  1186. eeprom.register_read = rt2500pci_eepromregister_read;
  1187. eeprom.register_write = rt2500pci_eepromregister_write;
  1188. eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
  1189. PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
  1190. eeprom.reg_data_in = 0;
  1191. eeprom.reg_data_out = 0;
  1192. eeprom.reg_data_clock = 0;
  1193. eeprom.reg_chip_select = 0;
  1194. eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
  1195. EEPROM_SIZE / sizeof(u16));
  1196. /*
  1197. * Start validation of the data that has been read.
  1198. */
  1199. mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
  1200. if (!is_valid_ether_addr(mac)) {
  1201. DECLARE_MAC_BUF(macbuf);
  1202. random_ether_addr(mac);
  1203. EEPROM(rt2x00dev, "MAC: %s\n",
  1204. print_mac(macbuf, mac));
  1205. }
  1206. rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
  1207. if (word == 0xffff) {
  1208. rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
  1209. rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
  1210. ANTENNA_SW_DIVERSITY);
  1211. rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
  1212. ANTENNA_SW_DIVERSITY);
  1213. rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
  1214. LED_MODE_DEFAULT);
  1215. rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
  1216. rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
  1217. rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
  1218. rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
  1219. EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
  1220. }
  1221. rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
  1222. if (word == 0xffff) {
  1223. rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
  1224. rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
  1225. rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
  1226. rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
  1227. EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
  1228. }
  1229. rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
  1230. if (word == 0xffff) {
  1231. rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
  1232. DEFAULT_RSSI_OFFSET);
  1233. rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
  1234. EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
  1235. }
  1236. return 0;
  1237. }
  1238. static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
  1239. {
  1240. u32 reg;
  1241. u16 value;
  1242. u16 eeprom;
  1243. /*
  1244. * Read EEPROM word for configuration.
  1245. */
  1246. rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
  1247. /*
  1248. * Identify RF chipset.
  1249. */
  1250. value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
  1251. rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
  1252. rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
  1253. if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
  1254. !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
  1255. !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
  1256. !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
  1257. !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
  1258. !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
  1259. ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
  1260. return -ENODEV;
  1261. }
  1262. /*
  1263. * Identify default antenna configuration.
  1264. */
  1265. rt2x00dev->default_ant.tx =
  1266. rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
  1267. rt2x00dev->default_ant.rx =
  1268. rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
  1269. /*
  1270. * Store led mode, for correct led behaviour.
  1271. */
  1272. #ifdef CONFIG_RT2500PCI_LEDS
  1273. value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
  1274. rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
  1275. if (value == LED_MODE_TXRX_ACTIVITY)
  1276. rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
  1277. LED_TYPE_ACTIVITY);
  1278. #endif /* CONFIG_RT2500PCI_LEDS */
  1279. /*
  1280. * Detect if this device has an hardware controlled radio.
  1281. */
  1282. #ifdef CONFIG_RT2500PCI_RFKILL
  1283. if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
  1284. __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
  1285. #endif /* CONFIG_RT2500PCI_RFKILL */
  1286. /*
  1287. * Check if the BBP tuning should be enabled.
  1288. */
  1289. rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
  1290. if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
  1291. __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
  1292. /*
  1293. * Read the RSSI <-> dBm offset information.
  1294. */
  1295. rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
  1296. rt2x00dev->rssi_offset =
  1297. rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
  1298. return 0;
  1299. }
  1300. /*
  1301. * RF value list for RF2522
  1302. * Supports: 2.4 GHz
  1303. */
  1304. static const struct rf_channel rf_vals_bg_2522[] = {
  1305. { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
  1306. { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
  1307. { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
  1308. { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
  1309. { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
  1310. { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
  1311. { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
  1312. { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
  1313. { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
  1314. { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
  1315. { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
  1316. { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
  1317. { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
  1318. { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
  1319. };
  1320. /*
  1321. * RF value list for RF2523
  1322. * Supports: 2.4 GHz
  1323. */
  1324. static const struct rf_channel rf_vals_bg_2523[] = {
  1325. { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
  1326. { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
  1327. { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
  1328. { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
  1329. { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
  1330. { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
  1331. { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
  1332. { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
  1333. { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
  1334. { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
  1335. { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
  1336. { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
  1337. { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
  1338. { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
  1339. };
  1340. /*
  1341. * RF value list for RF2524
  1342. * Supports: 2.4 GHz
  1343. */
  1344. static const struct rf_channel rf_vals_bg_2524[] = {
  1345. { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
  1346. { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
  1347. { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
  1348. { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
  1349. { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
  1350. { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
  1351. { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
  1352. { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
  1353. { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
  1354. { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
  1355. { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
  1356. { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
  1357. { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
  1358. { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
  1359. };
  1360. /*
  1361. * RF value list for RF2525
  1362. * Supports: 2.4 GHz
  1363. */
  1364. static const struct rf_channel rf_vals_bg_2525[] = {
  1365. { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
  1366. { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
  1367. { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
  1368. { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
  1369. { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
  1370. { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
  1371. { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
  1372. { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
  1373. { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
  1374. { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
  1375. { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
  1376. { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
  1377. { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
  1378. { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
  1379. };
  1380. /*
  1381. * RF value list for RF2525e
  1382. * Supports: 2.4 GHz
  1383. */
  1384. static const struct rf_channel rf_vals_bg_2525e[] = {
  1385. { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
  1386. { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
  1387. { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
  1388. { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
  1389. { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
  1390. { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
  1391. { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
  1392. { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
  1393. { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
  1394. { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
  1395. { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
  1396. { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
  1397. { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
  1398. { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
  1399. };
  1400. /*
  1401. * RF value list for RF5222
  1402. * Supports: 2.4 GHz & 5.2 GHz
  1403. */
  1404. static const struct rf_channel rf_vals_5222[] = {
  1405. { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
  1406. { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
  1407. { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
  1408. { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
  1409. { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
  1410. { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
  1411. { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
  1412. { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
  1413. { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
  1414. { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
  1415. { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
  1416. { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
  1417. { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
  1418. { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
  1419. /* 802.11 UNI / HyperLan 2 */
  1420. { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
  1421. { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
  1422. { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
  1423. { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
  1424. { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
  1425. { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
  1426. { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
  1427. { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
  1428. /* 802.11 HyperLan 2 */
  1429. { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
  1430. { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
  1431. { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
  1432. { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
  1433. { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
  1434. { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
  1435. { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
  1436. { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
  1437. { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
  1438. { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
  1439. /* 802.11 UNII */
  1440. { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
  1441. { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
  1442. { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
  1443. { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
  1444. { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
  1445. };
  1446. static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
  1447. {
  1448. struct hw_mode_spec *spec = &rt2x00dev->spec;
  1449. u8 *txpower;
  1450. unsigned int i;
  1451. /*
  1452. * Initialize all hw fields.
  1453. */
  1454. rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
  1455. IEEE80211_HW_SIGNAL_DBM;
  1456. rt2x00dev->hw->extra_tx_headroom = 0;
  1457. SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
  1458. SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
  1459. rt2x00_eeprom_addr(rt2x00dev,
  1460. EEPROM_MAC_ADDR_0));
  1461. /*
  1462. * Convert tx_power array in eeprom.
  1463. */
  1464. txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
  1465. for (i = 0; i < 14; i++)
  1466. txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
  1467. /*
  1468. * Initialize hw_mode information.
  1469. */
  1470. spec->supported_bands = SUPPORT_BAND_2GHZ;
  1471. spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
  1472. spec->tx_power_a = NULL;
  1473. spec->tx_power_bg = txpower;
  1474. spec->tx_power_default = DEFAULT_TXPOWER;
  1475. if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
  1476. spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
  1477. spec->channels = rf_vals_bg_2522;
  1478. } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
  1479. spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
  1480. spec->channels = rf_vals_bg_2523;
  1481. } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
  1482. spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
  1483. spec->channels = rf_vals_bg_2524;
  1484. } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
  1485. spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
  1486. spec->channels = rf_vals_bg_2525;
  1487. } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
  1488. spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
  1489. spec->channels = rf_vals_bg_2525e;
  1490. } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
  1491. spec->supported_bands |= SUPPORT_BAND_5GHZ;
  1492. spec->num_channels = ARRAY_SIZE(rf_vals_5222);
  1493. spec->channels = rf_vals_5222;
  1494. }
  1495. }
  1496. static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
  1497. {
  1498. int retval;
  1499. /*
  1500. * Allocate eeprom data.
  1501. */
  1502. retval = rt2500pci_validate_eeprom(rt2x00dev);
  1503. if (retval)
  1504. return retval;
  1505. retval = rt2500pci_init_eeprom(rt2x00dev);
  1506. if (retval)
  1507. return retval;
  1508. /*
  1509. * Initialize hw specifications.
  1510. */
  1511. rt2500pci_probe_hw_mode(rt2x00dev);
  1512. /*
  1513. * This device requires the atim queue
  1514. */
  1515. __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
  1516. /*
  1517. * Set the rssi offset.
  1518. */
  1519. rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
  1520. return 0;
  1521. }
  1522. /*
  1523. * IEEE80211 stack callback functions.
  1524. */
  1525. static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw,
  1526. u32 short_retry, u32 long_retry)
  1527. {
  1528. struct rt2x00_dev *rt2x00dev = hw->priv;
  1529. u32 reg;
  1530. rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
  1531. rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
  1532. rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
  1533. rt2x00pci_register_write(rt2x00dev, CSR11, reg);
  1534. return 0;
  1535. }
  1536. static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
  1537. {
  1538. struct rt2x00_dev *rt2x00dev = hw->priv;
  1539. u64 tsf;
  1540. u32 reg;
  1541. rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
  1542. tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
  1543. rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
  1544. tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
  1545. return tsf;
  1546. }
  1547. static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
  1548. {
  1549. struct rt2x00_dev *rt2x00dev = hw->priv;
  1550. struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
  1551. struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
  1552. struct queue_entry_priv_pci *entry_priv;
  1553. struct skb_frame_desc *skbdesc;
  1554. struct txentry_desc txdesc;
  1555. u32 reg;
  1556. if (unlikely(!intf->beacon))
  1557. return -ENOBUFS;
  1558. entry_priv = intf->beacon->priv_data;
  1559. /*
  1560. * Copy all TX descriptor information into txdesc,
  1561. * after that we are free to use the skb->cb array
  1562. * for our information.
  1563. */
  1564. intf->beacon->skb = skb;
  1565. rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
  1566. /*
  1567. * Fill in skb descriptor
  1568. */
  1569. skbdesc = get_skb_frame_desc(skb);
  1570. memset(skbdesc, 0, sizeof(*skbdesc));
  1571. skbdesc->desc = entry_priv->desc;
  1572. skbdesc->desc_len = intf->beacon->queue->desc_size;
  1573. skbdesc->entry = intf->beacon;
  1574. /*
  1575. * Disable beaconing while we are reloading the beacon data,
  1576. * otherwise we might be sending out invalid data.
  1577. */
  1578. rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
  1579. rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
  1580. rt2x00_set_field32(&reg, CSR14_TBCN, 0);
  1581. rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
  1582. rt2x00pci_register_write(rt2x00dev, CSR14, reg);
  1583. /*
  1584. * Enable beacon generation.
  1585. * Write entire beacon with descriptor to register,
  1586. * and kick the beacon generator.
  1587. */
  1588. memcpy(entry_priv->data, skb->data, skb->len);
  1589. rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
  1590. rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
  1591. return 0;
  1592. }
  1593. static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
  1594. {
  1595. struct rt2x00_dev *rt2x00dev = hw->priv;
  1596. u32 reg;
  1597. rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
  1598. return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
  1599. }
  1600. static const struct ieee80211_ops rt2500pci_mac80211_ops = {
  1601. .tx = rt2x00mac_tx,
  1602. .start = rt2x00mac_start,
  1603. .stop = rt2x00mac_stop,
  1604. .add_interface = rt2x00mac_add_interface,
  1605. .remove_interface = rt2x00mac_remove_interface,
  1606. .config = rt2x00mac_config,
  1607. .config_interface = rt2x00mac_config_interface,
  1608. .configure_filter = rt2x00mac_configure_filter,
  1609. .get_stats = rt2x00mac_get_stats,
  1610. .set_retry_limit = rt2500pci_set_retry_limit,
  1611. .bss_info_changed = rt2x00mac_bss_info_changed,
  1612. .conf_tx = rt2x00mac_conf_tx,
  1613. .get_tx_stats = rt2x00mac_get_tx_stats,
  1614. .get_tsf = rt2500pci_get_tsf,
  1615. .beacon_update = rt2500pci_beacon_update,
  1616. .tx_last_beacon = rt2500pci_tx_last_beacon,
  1617. };
  1618. static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
  1619. .irq_handler = rt2500pci_interrupt,
  1620. .probe_hw = rt2500pci_probe_hw,
  1621. .initialize = rt2x00pci_initialize,
  1622. .uninitialize = rt2x00pci_uninitialize,
  1623. .init_rxentry = rt2500pci_init_rxentry,
  1624. .init_txentry = rt2500pci_init_txentry,
  1625. .set_device_state = rt2500pci_set_device_state,
  1626. .rfkill_poll = rt2500pci_rfkill_poll,
  1627. .link_stats = rt2500pci_link_stats,
  1628. .reset_tuner = rt2500pci_reset_tuner,
  1629. .link_tuner = rt2500pci_link_tuner,
  1630. .write_tx_desc = rt2500pci_write_tx_desc,
  1631. .write_tx_data = rt2x00pci_write_tx_data,
  1632. .kick_tx_queue = rt2500pci_kick_tx_queue,
  1633. .fill_rxdone = rt2500pci_fill_rxdone,
  1634. .config_filter = rt2500pci_config_filter,
  1635. .config_intf = rt2500pci_config_intf,
  1636. .config_erp = rt2500pci_config_erp,
  1637. .config = rt2500pci_config,
  1638. };
  1639. static const struct data_queue_desc rt2500pci_queue_rx = {
  1640. .entry_num = RX_ENTRIES,
  1641. .data_size = DATA_FRAME_SIZE,
  1642. .desc_size = RXD_DESC_SIZE,
  1643. .priv_size = sizeof(struct queue_entry_priv_pci),
  1644. };
  1645. static const struct data_queue_desc rt2500pci_queue_tx = {
  1646. .entry_num = TX_ENTRIES,
  1647. .data_size = DATA_FRAME_SIZE,
  1648. .desc_size = TXD_DESC_SIZE,
  1649. .priv_size = sizeof(struct queue_entry_priv_pci),
  1650. };
  1651. static const struct data_queue_desc rt2500pci_queue_bcn = {
  1652. .entry_num = BEACON_ENTRIES,
  1653. .data_size = MGMT_FRAME_SIZE,
  1654. .desc_size = TXD_DESC_SIZE,
  1655. .priv_size = sizeof(struct queue_entry_priv_pci),
  1656. };
  1657. static const struct data_queue_desc rt2500pci_queue_atim = {
  1658. .entry_num = ATIM_ENTRIES,
  1659. .data_size = DATA_FRAME_SIZE,
  1660. .desc_size = TXD_DESC_SIZE,
  1661. .priv_size = sizeof(struct queue_entry_priv_pci),
  1662. };
  1663. static const struct rt2x00_ops rt2500pci_ops = {
  1664. .name = KBUILD_MODNAME,
  1665. .max_sta_intf = 1,
  1666. .max_ap_intf = 1,
  1667. .eeprom_size = EEPROM_SIZE,
  1668. .rf_size = RF_SIZE,
  1669. .tx_queues = NUM_TX_QUEUES,
  1670. .rx = &rt2500pci_queue_rx,
  1671. .tx = &rt2500pci_queue_tx,
  1672. .bcn = &rt2500pci_queue_bcn,
  1673. .atim = &rt2500pci_queue_atim,
  1674. .lib = &rt2500pci_rt2x00_ops,
  1675. .hw = &rt2500pci_mac80211_ops,
  1676. #ifdef CONFIG_RT2X00_LIB_DEBUGFS
  1677. .debugfs = &rt2500pci_rt2x00debug,
  1678. #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
  1679. };
  1680. /*
  1681. * RT2500pci module information.
  1682. */
  1683. static struct pci_device_id rt2500pci_device_table[] = {
  1684. { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
  1685. { 0, }
  1686. };
  1687. MODULE_AUTHOR(DRV_PROJECT);
  1688. MODULE_VERSION(DRV_VERSION);
  1689. MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
  1690. MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
  1691. MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
  1692. MODULE_LICENSE("GPL");
  1693. static struct pci_driver rt2500pci_driver = {
  1694. .name = KBUILD_MODNAME,
  1695. .id_table = rt2500pci_device_table,
  1696. .probe = rt2x00pci_probe,
  1697. .remove = __devexit_p(rt2x00pci_remove),
  1698. .suspend = rt2x00pci_suspend,
  1699. .resume = rt2x00pci_resume,
  1700. };
  1701. static int __init rt2500pci_init(void)
  1702. {
  1703. return pci_register_driver(&rt2500pci_driver);
  1704. }
  1705. static void __exit rt2500pci_exit(void)
  1706. {
  1707. pci_unregister_driver(&rt2500pci_driver);
  1708. }
  1709. module_init(rt2500pci_init);
  1710. module_exit(rt2500pci_exit);