config.c 15 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525
  1. /*
  2. * net/tipc/config.c: TIPC configuration management code
  3. *
  4. * Copyright (c) 2002-2006, Ericsson AB
  5. * Copyright (c) 2004-2007, Wind River Systems
  6. * All rights reserved.
  7. *
  8. * Redistribution and use in source and binary forms, with or without
  9. * modification, are permitted provided that the following conditions are met:
  10. *
  11. * 1. Redistributions of source code must retain the above copyright
  12. * notice, this list of conditions and the following disclaimer.
  13. * 2. Redistributions in binary form must reproduce the above copyright
  14. * notice, this list of conditions and the following disclaimer in the
  15. * documentation and/or other materials provided with the distribution.
  16. * 3. Neither the names of the copyright holders nor the names of its
  17. * contributors may be used to endorse or promote products derived from
  18. * this software without specific prior written permission.
  19. *
  20. * Alternatively, this software may be distributed under the terms of the
  21. * GNU General Public License ("GPL") version 2 as published by the Free
  22. * Software Foundation.
  23. *
  24. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25. * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  27. * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  28. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  29. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  30. * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  31. * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  32. * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  33. * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  34. * POSSIBILITY OF SUCH DAMAGE.
  35. */
  36. #include "core.h"
  37. #include "port.h"
  38. #include "name_table.h"
  39. #include "config.h"
  40. static u32 config_port_ref;
  41. static DEFINE_SPINLOCK(config_lock);
  42. static const void *req_tlv_area; /* request message TLV area */
  43. static int req_tlv_space; /* request message TLV area size */
  44. static int rep_headroom; /* reply message headroom to use */
  45. struct sk_buff *tipc_cfg_reply_alloc(int payload_size)
  46. {
  47. struct sk_buff *buf;
  48. buf = alloc_skb(rep_headroom + payload_size, GFP_ATOMIC);
  49. if (buf)
  50. skb_reserve(buf, rep_headroom);
  51. return buf;
  52. }
  53. int tipc_cfg_append_tlv(struct sk_buff *buf, int tlv_type,
  54. void *tlv_data, int tlv_data_size)
  55. {
  56. struct tlv_desc *tlv = (struct tlv_desc *)skb_tail_pointer(buf);
  57. int new_tlv_space = TLV_SPACE(tlv_data_size);
  58. if (skb_tailroom(buf) < new_tlv_space)
  59. return 0;
  60. skb_put(buf, new_tlv_space);
  61. tlv->tlv_type = htons(tlv_type);
  62. tlv->tlv_len = htons(TLV_LENGTH(tlv_data_size));
  63. if (tlv_data_size && tlv_data)
  64. memcpy(TLV_DATA(tlv), tlv_data, tlv_data_size);
  65. return 1;
  66. }
  67. static struct sk_buff *tipc_cfg_reply_unsigned_type(u16 tlv_type, u32 value)
  68. {
  69. struct sk_buff *buf;
  70. __be32 value_net;
  71. buf = tipc_cfg_reply_alloc(TLV_SPACE(sizeof(value)));
  72. if (buf) {
  73. value_net = htonl(value);
  74. tipc_cfg_append_tlv(buf, tlv_type, &value_net,
  75. sizeof(value_net));
  76. }
  77. return buf;
  78. }
  79. static struct sk_buff *tipc_cfg_reply_unsigned(u32 value)
  80. {
  81. return tipc_cfg_reply_unsigned_type(TIPC_TLV_UNSIGNED, value);
  82. }
  83. struct sk_buff *tipc_cfg_reply_string_type(u16 tlv_type, char *string)
  84. {
  85. struct sk_buff *buf;
  86. int string_len = strlen(string) + 1;
  87. buf = tipc_cfg_reply_alloc(TLV_SPACE(string_len));
  88. if (buf)
  89. tipc_cfg_append_tlv(buf, tlv_type, string, string_len);
  90. return buf;
  91. }
  92. #define MAX_STATS_INFO 2000
  93. static struct sk_buff *tipc_show_stats(void)
  94. {
  95. struct sk_buff *buf;
  96. struct tlv_desc *rep_tlv;
  97. struct print_buf pb;
  98. int str_len;
  99. u32 value;
  100. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  101. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  102. value = ntohl(*(u32 *)TLV_DATA(req_tlv_area));
  103. if (value != 0)
  104. return tipc_cfg_reply_error_string("unsupported argument");
  105. buf = tipc_cfg_reply_alloc(TLV_SPACE(MAX_STATS_INFO));
  106. if (buf == NULL)
  107. return NULL;
  108. rep_tlv = (struct tlv_desc *)buf->data;
  109. tipc_printbuf_init(&pb, (char *)TLV_DATA(rep_tlv), MAX_STATS_INFO);
  110. tipc_printf(&pb, "TIPC version " TIPC_MOD_VER "\n");
  111. /* Use additional tipc_printf()'s to return more info ... */
  112. str_len = tipc_printbuf_validate(&pb);
  113. skb_put(buf, TLV_SPACE(str_len));
  114. TLV_SET(rep_tlv, TIPC_TLV_ULTRA_STRING, NULL, str_len);
  115. return buf;
  116. }
  117. static struct sk_buff *cfg_enable_bearer(void)
  118. {
  119. struct tipc_bearer_config *args;
  120. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_BEARER_CONFIG))
  121. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  122. args = (struct tipc_bearer_config *)TLV_DATA(req_tlv_area);
  123. if (tipc_enable_bearer(args->name,
  124. ntohl(args->detect_scope),
  125. ntohl(args->priority)))
  126. return tipc_cfg_reply_error_string("unable to enable bearer");
  127. return tipc_cfg_reply_none();
  128. }
  129. static struct sk_buff *cfg_disable_bearer(void)
  130. {
  131. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_BEARER_NAME))
  132. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  133. if (tipc_disable_bearer((char *)TLV_DATA(req_tlv_area)))
  134. return tipc_cfg_reply_error_string("unable to disable bearer");
  135. return tipc_cfg_reply_none();
  136. }
  137. static struct sk_buff *cfg_set_own_addr(void)
  138. {
  139. u32 addr;
  140. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_NET_ADDR))
  141. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  142. addr = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  143. if (addr == tipc_own_addr)
  144. return tipc_cfg_reply_none();
  145. if (!tipc_addr_node_valid(addr))
  146. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  147. " (node address)");
  148. if (tipc_mode == TIPC_NET_MODE)
  149. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  150. " (cannot change node address once assigned)");
  151. /*
  152. * Must release all spinlocks before calling start_net() because
  153. * Linux version of TIPC calls eth_media_start() which calls
  154. * register_netdevice_notifier() which may block!
  155. *
  156. * Temporarily releasing the lock should be harmless for non-Linux TIPC,
  157. * but Linux version of eth_media_start() should really be reworked
  158. * so that it can be called with spinlocks held.
  159. */
  160. spin_unlock_bh(&config_lock);
  161. tipc_core_start_net(addr);
  162. spin_lock_bh(&config_lock);
  163. return tipc_cfg_reply_none();
  164. }
  165. static struct sk_buff *cfg_set_remote_mng(void)
  166. {
  167. u32 value;
  168. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  169. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  170. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  171. tipc_remote_management = (value != 0);
  172. return tipc_cfg_reply_none();
  173. }
  174. static struct sk_buff *cfg_set_max_publications(void)
  175. {
  176. u32 value;
  177. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  178. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  179. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  180. if (value != delimit(value, 1, 65535))
  181. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  182. " (max publications must be 1-65535)");
  183. tipc_max_publications = value;
  184. return tipc_cfg_reply_none();
  185. }
  186. static struct sk_buff *cfg_set_max_subscriptions(void)
  187. {
  188. u32 value;
  189. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  190. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  191. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  192. if (value != delimit(value, 1, 65535))
  193. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  194. " (max subscriptions must be 1-65535");
  195. tipc_max_subscriptions = value;
  196. return tipc_cfg_reply_none();
  197. }
  198. static struct sk_buff *cfg_set_max_ports(void)
  199. {
  200. u32 value;
  201. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  202. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  203. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  204. if (value == tipc_max_ports)
  205. return tipc_cfg_reply_none();
  206. if (value != delimit(value, 127, 65535))
  207. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  208. " (max ports must be 127-65535)");
  209. if (tipc_mode != TIPC_NOT_RUNNING)
  210. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  211. " (cannot change max ports while TIPC is active)");
  212. tipc_max_ports = value;
  213. return tipc_cfg_reply_none();
  214. }
  215. static struct sk_buff *cfg_set_max_nodes(void)
  216. {
  217. u32 value;
  218. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  219. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  220. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  221. if (value == tipc_max_nodes)
  222. return tipc_cfg_reply_none();
  223. if (value != delimit(value, 8, 2047))
  224. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  225. " (max nodes must be 8-2047)");
  226. if (tipc_mode == TIPC_NET_MODE)
  227. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  228. " (cannot change max nodes once TIPC has joined a network)");
  229. tipc_max_nodes = value;
  230. return tipc_cfg_reply_none();
  231. }
  232. static struct sk_buff *cfg_set_netid(void)
  233. {
  234. u32 value;
  235. if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
  236. return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
  237. value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
  238. if (value == tipc_net_id)
  239. return tipc_cfg_reply_none();
  240. if (value != delimit(value, 1, 9999))
  241. return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
  242. " (network id must be 1-9999)");
  243. if (tipc_mode == TIPC_NET_MODE)
  244. return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  245. " (cannot change network id once TIPC has joined a network)");
  246. tipc_net_id = value;
  247. return tipc_cfg_reply_none();
  248. }
  249. struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area,
  250. int request_space, int reply_headroom)
  251. {
  252. struct sk_buff *rep_tlv_buf;
  253. spin_lock_bh(&config_lock);
  254. /* Save request and reply details in a well-known location */
  255. req_tlv_area = request_area;
  256. req_tlv_space = request_space;
  257. rep_headroom = reply_headroom;
  258. /* Check command authorization */
  259. if (likely(orig_node == tipc_own_addr)) {
  260. /* command is permitted */
  261. } else if (cmd >= 0x8000) {
  262. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  263. " (cannot be done remotely)");
  264. goto exit;
  265. } else if (!tipc_remote_management) {
  266. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NO_REMOTE);
  267. goto exit;
  268. } else if (cmd >= 0x4000) {
  269. u32 domain = 0;
  270. if ((tipc_nametbl_translate(TIPC_ZM_SRV, 0, &domain) == 0) ||
  271. (domain != orig_node)) {
  272. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_ZONE_MSTR);
  273. goto exit;
  274. }
  275. }
  276. /* Call appropriate processing routine */
  277. switch (cmd) {
  278. case TIPC_CMD_NOOP:
  279. rep_tlv_buf = tipc_cfg_reply_none();
  280. break;
  281. case TIPC_CMD_GET_NODES:
  282. rep_tlv_buf = tipc_node_get_nodes(req_tlv_area, req_tlv_space);
  283. break;
  284. case TIPC_CMD_GET_LINKS:
  285. rep_tlv_buf = tipc_node_get_links(req_tlv_area, req_tlv_space);
  286. break;
  287. case TIPC_CMD_SHOW_LINK_STATS:
  288. rep_tlv_buf = tipc_link_cmd_show_stats(req_tlv_area, req_tlv_space);
  289. break;
  290. case TIPC_CMD_RESET_LINK_STATS:
  291. rep_tlv_buf = tipc_link_cmd_reset_stats(req_tlv_area, req_tlv_space);
  292. break;
  293. case TIPC_CMD_SHOW_NAME_TABLE:
  294. rep_tlv_buf = tipc_nametbl_get(req_tlv_area, req_tlv_space);
  295. break;
  296. case TIPC_CMD_GET_BEARER_NAMES:
  297. rep_tlv_buf = tipc_bearer_get_names();
  298. break;
  299. case TIPC_CMD_GET_MEDIA_NAMES:
  300. rep_tlv_buf = tipc_media_get_names();
  301. break;
  302. case TIPC_CMD_SHOW_PORTS:
  303. rep_tlv_buf = tipc_port_get_ports();
  304. break;
  305. case TIPC_CMD_SET_LOG_SIZE:
  306. rep_tlv_buf = tipc_log_resize_cmd(req_tlv_area, req_tlv_space);
  307. break;
  308. case TIPC_CMD_DUMP_LOG:
  309. rep_tlv_buf = tipc_log_dump();
  310. break;
  311. case TIPC_CMD_SHOW_STATS:
  312. rep_tlv_buf = tipc_show_stats();
  313. break;
  314. case TIPC_CMD_SET_LINK_TOL:
  315. case TIPC_CMD_SET_LINK_PRI:
  316. case TIPC_CMD_SET_LINK_WINDOW:
  317. rep_tlv_buf = tipc_link_cmd_config(req_tlv_area, req_tlv_space, cmd);
  318. break;
  319. case TIPC_CMD_ENABLE_BEARER:
  320. rep_tlv_buf = cfg_enable_bearer();
  321. break;
  322. case TIPC_CMD_DISABLE_BEARER:
  323. rep_tlv_buf = cfg_disable_bearer();
  324. break;
  325. case TIPC_CMD_SET_NODE_ADDR:
  326. rep_tlv_buf = cfg_set_own_addr();
  327. break;
  328. case TIPC_CMD_SET_REMOTE_MNG:
  329. rep_tlv_buf = cfg_set_remote_mng();
  330. break;
  331. case TIPC_CMD_SET_MAX_PORTS:
  332. rep_tlv_buf = cfg_set_max_ports();
  333. break;
  334. case TIPC_CMD_SET_MAX_PUBL:
  335. rep_tlv_buf = cfg_set_max_publications();
  336. break;
  337. case TIPC_CMD_SET_MAX_SUBSCR:
  338. rep_tlv_buf = cfg_set_max_subscriptions();
  339. break;
  340. case TIPC_CMD_SET_MAX_NODES:
  341. rep_tlv_buf = cfg_set_max_nodes();
  342. break;
  343. case TIPC_CMD_SET_NETID:
  344. rep_tlv_buf = cfg_set_netid();
  345. break;
  346. case TIPC_CMD_GET_REMOTE_MNG:
  347. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_remote_management);
  348. break;
  349. case TIPC_CMD_GET_MAX_PORTS:
  350. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_ports);
  351. break;
  352. case TIPC_CMD_GET_MAX_PUBL:
  353. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_publications);
  354. break;
  355. case TIPC_CMD_GET_MAX_SUBSCR:
  356. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_subscriptions);
  357. break;
  358. case TIPC_CMD_GET_MAX_NODES:
  359. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_nodes);
  360. break;
  361. case TIPC_CMD_GET_NETID:
  362. rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_net_id);
  363. break;
  364. case TIPC_CMD_NOT_NET_ADMIN:
  365. rep_tlv_buf =
  366. tipc_cfg_reply_error_string(TIPC_CFG_NOT_NET_ADMIN);
  367. break;
  368. case TIPC_CMD_SET_MAX_ZONES:
  369. case TIPC_CMD_GET_MAX_ZONES:
  370. case TIPC_CMD_SET_MAX_SLAVES:
  371. case TIPC_CMD_GET_MAX_SLAVES:
  372. case TIPC_CMD_SET_MAX_CLUSTERS:
  373. case TIPC_CMD_GET_MAX_CLUSTERS:
  374. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  375. " (obsolete command)");
  376. break;
  377. default:
  378. rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
  379. " (unknown command)");
  380. break;
  381. }
  382. /* Return reply buffer */
  383. exit:
  384. spin_unlock_bh(&config_lock);
  385. return rep_tlv_buf;
  386. }
  387. static void cfg_named_msg_event(void *userdata,
  388. u32 port_ref,
  389. struct sk_buff **buf,
  390. const unchar *msg,
  391. u32 size,
  392. u32 importance,
  393. struct tipc_portid const *orig,
  394. struct tipc_name_seq const *dest)
  395. {
  396. struct tipc_cfg_msg_hdr *req_hdr;
  397. struct tipc_cfg_msg_hdr *rep_hdr;
  398. struct sk_buff *rep_buf;
  399. /* Validate configuration message header (ignore invalid message) */
  400. req_hdr = (struct tipc_cfg_msg_hdr *)msg;
  401. if ((size < sizeof(*req_hdr)) ||
  402. (size != TCM_ALIGN(ntohl(req_hdr->tcm_len))) ||
  403. (ntohs(req_hdr->tcm_flags) != TCM_F_REQUEST)) {
  404. warn("Invalid configuration message discarded\n");
  405. return;
  406. }
  407. /* Generate reply for request (if can't, return request) */
  408. rep_buf = tipc_cfg_do_cmd(orig->node,
  409. ntohs(req_hdr->tcm_type),
  410. msg + sizeof(*req_hdr),
  411. size - sizeof(*req_hdr),
  412. BUF_HEADROOM + MAX_H_SIZE + sizeof(*rep_hdr));
  413. if (rep_buf) {
  414. skb_push(rep_buf, sizeof(*rep_hdr));
  415. rep_hdr = (struct tipc_cfg_msg_hdr *)rep_buf->data;
  416. memcpy(rep_hdr, req_hdr, sizeof(*rep_hdr));
  417. rep_hdr->tcm_len = htonl(rep_buf->len);
  418. rep_hdr->tcm_flags &= htons(~TCM_F_REQUEST);
  419. } else {
  420. rep_buf = *buf;
  421. *buf = NULL;
  422. }
  423. /* NEED TO ADD CODE TO HANDLE FAILED SEND (SUCH AS CONGESTION) */
  424. tipc_send_buf2port(port_ref, orig, rep_buf, rep_buf->len);
  425. }
  426. int tipc_cfg_init(void)
  427. {
  428. struct tipc_name_seq seq;
  429. int res;
  430. res = tipc_createport(NULL, TIPC_CRITICAL_IMPORTANCE,
  431. NULL, NULL, NULL,
  432. NULL, cfg_named_msg_event, NULL,
  433. NULL, &config_port_ref);
  434. if (res)
  435. goto failed;
  436. seq.type = TIPC_CFG_SRV;
  437. seq.lower = seq.upper = tipc_own_addr;
  438. res = tipc_nametbl_publish_rsv(config_port_ref, TIPC_ZONE_SCOPE, &seq);
  439. if (res)
  440. goto failed;
  441. return 0;
  442. failed:
  443. err("Unable to create configuration service\n");
  444. return res;
  445. }
  446. void tipc_cfg_stop(void)
  447. {
  448. if (config_port_ref) {
  449. tipc_deleteport(config_port_ref);
  450. config_port_ref = 0;
  451. }
  452. }