setup_percpu.c 9.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386
  1. #include <linux/kernel.h>
  2. #include <linux/module.h>
  3. #include <linux/init.h>
  4. #include <linux/bootmem.h>
  5. #include <linux/percpu.h>
  6. #include <linux/kexec.h>
  7. #include <linux/crash_dump.h>
  8. #include <asm/smp.h>
  9. #include <asm/percpu.h>
  10. #include <asm/sections.h>
  11. #include <asm/processor.h>
  12. #include <asm/setup.h>
  13. #include <asm/topology.h>
  14. #include <asm/mpspec.h>
  15. #include <asm/apicdef.h>
  16. #include <asm/highmem.h>
  17. #ifdef CONFIG_X86_LOCAL_APIC
  18. unsigned int num_processors;
  19. unsigned disabled_cpus __cpuinitdata;
  20. /* Processor that is doing the boot up */
  21. unsigned int boot_cpu_physical_apicid = -1U;
  22. unsigned int max_physical_apicid;
  23. EXPORT_SYMBOL(boot_cpu_physical_apicid);
  24. /* Bitmask of physically existing CPUs */
  25. physid_mask_t phys_cpu_present_map;
  26. #endif
  27. /* map cpu index to physical APIC ID */
  28. DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
  29. DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
  30. EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
  31. EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
  32. #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
  33. #define X86_64_NUMA 1
  34. /* map cpu index to node index */
  35. DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
  36. EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
  37. /* which logical CPUs are on which nodes */
  38. cpumask_t *node_to_cpumask_map;
  39. EXPORT_SYMBOL(node_to_cpumask_map);
  40. /* setup node_to_cpumask_map */
  41. static void __init setup_node_to_cpumask_map(void);
  42. #else
  43. static inline void setup_node_to_cpumask_map(void) { }
  44. #endif
  45. #if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
  46. /*
  47. * Copy data used in early init routines from the initial arrays to the
  48. * per cpu data areas. These arrays then become expendable and the
  49. * *_early_ptr's are zeroed indicating that the static arrays are gone.
  50. */
  51. static void __init setup_per_cpu_maps(void)
  52. {
  53. int cpu;
  54. for_each_possible_cpu(cpu) {
  55. per_cpu(x86_cpu_to_apicid, cpu) =
  56. early_per_cpu_map(x86_cpu_to_apicid, cpu);
  57. per_cpu(x86_bios_cpu_apicid, cpu) =
  58. early_per_cpu_map(x86_bios_cpu_apicid, cpu);
  59. #ifdef X86_64_NUMA
  60. per_cpu(x86_cpu_to_node_map, cpu) =
  61. early_per_cpu_map(x86_cpu_to_node_map, cpu);
  62. #endif
  63. }
  64. /* indicate the early static arrays will soon be gone */
  65. early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
  66. early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
  67. #ifdef X86_64_NUMA
  68. early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
  69. #endif
  70. }
  71. #ifdef CONFIG_X86_32
  72. /*
  73. * Great future not-so-futuristic plan: make i386 and x86_64 do it
  74. * the same way
  75. */
  76. unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
  77. EXPORT_SYMBOL(__per_cpu_offset);
  78. static inline void setup_cpu_pda_map(void) { }
  79. #elif !defined(CONFIG_SMP)
  80. static inline void setup_cpu_pda_map(void) { }
  81. #else /* CONFIG_SMP && CONFIG_X86_64 */
  82. /*
  83. * Allocate cpu_pda pointer table and array via alloc_bootmem.
  84. */
  85. static void __init setup_cpu_pda_map(void)
  86. {
  87. char *pda;
  88. struct x8664_pda **new_cpu_pda;
  89. unsigned long size;
  90. int cpu;
  91. size = roundup(sizeof(struct x8664_pda), cache_line_size());
  92. /* allocate cpu_pda array and pointer table */
  93. {
  94. unsigned long tsize = nr_cpu_ids * sizeof(void *);
  95. unsigned long asize = size * (nr_cpu_ids - 1);
  96. tsize = roundup(tsize, cache_line_size());
  97. new_cpu_pda = alloc_bootmem(tsize + asize);
  98. pda = (char *)new_cpu_pda + tsize;
  99. }
  100. /* initialize pointer table to static pda's */
  101. for_each_possible_cpu(cpu) {
  102. if (cpu == 0) {
  103. /* leave boot cpu pda in place */
  104. new_cpu_pda[0] = cpu_pda(0);
  105. continue;
  106. }
  107. new_cpu_pda[cpu] = (struct x8664_pda *)pda;
  108. new_cpu_pda[cpu]->in_bootmem = 1;
  109. pda += size;
  110. }
  111. /* point to new pointer table */
  112. _cpu_pda = new_cpu_pda;
  113. }
  114. #endif
  115. /*
  116. * Great future plan:
  117. * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
  118. * Always point %gs to its beginning
  119. */
  120. void __init setup_per_cpu_areas(void)
  121. {
  122. ssize_t size, old_size;
  123. char *ptr;
  124. int cpu;
  125. unsigned long align = 1;
  126. /* Setup cpu_pda map */
  127. setup_cpu_pda_map();
  128. /* Copy section for each CPU (we discard the original) */
  129. old_size = PERCPU_ENOUGH_ROOM;
  130. align = max_t(unsigned long, PAGE_SIZE, align);
  131. size = roundup(old_size, align);
  132. pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
  133. NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
  134. pr_info("PERCPU: Allocating %zd bytes of per cpu data\n", size);
  135. for_each_possible_cpu(cpu) {
  136. #ifndef CONFIG_NEED_MULTIPLE_NODES
  137. ptr = __alloc_bootmem(size, align,
  138. __pa(MAX_DMA_ADDRESS));
  139. #else
  140. int node = early_cpu_to_node(cpu);
  141. if (!node_online(node) || !NODE_DATA(node)) {
  142. ptr = __alloc_bootmem(size, align,
  143. __pa(MAX_DMA_ADDRESS));
  144. pr_info("cpu %d has no node %d or node-local memory\n",
  145. cpu, node);
  146. pr_debug("per cpu data for cpu%d at %016lx\n",
  147. cpu, __pa(ptr));
  148. } else {
  149. ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
  150. __pa(MAX_DMA_ADDRESS));
  151. pr_debug("per cpu data for cpu%d on node%d at %016lx\n",
  152. cpu, node, __pa(ptr));
  153. }
  154. #endif
  155. per_cpu_offset(cpu) = ptr - __per_cpu_start;
  156. memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
  157. }
  158. /* Setup percpu data maps */
  159. setup_per_cpu_maps();
  160. /* Setup node to cpumask map */
  161. setup_node_to_cpumask_map();
  162. }
  163. #endif
  164. #ifdef X86_64_NUMA
  165. /*
  166. * Allocate node_to_cpumask_map based on number of available nodes
  167. * Requires node_possible_map to be valid.
  168. *
  169. * Note: node_to_cpumask() is not valid until after this is done.
  170. */
  171. static void __init setup_node_to_cpumask_map(void)
  172. {
  173. unsigned int node, num = 0;
  174. cpumask_t *map;
  175. /* setup nr_node_ids if not done yet */
  176. if (nr_node_ids == MAX_NUMNODES) {
  177. for_each_node_mask(node, node_possible_map)
  178. num = node;
  179. nr_node_ids = num + 1;
  180. }
  181. /* allocate the map */
  182. map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
  183. pr_debug("Node to cpumask map at %p for %d nodes\n",
  184. map, nr_node_ids);
  185. /* node_to_cpumask() will now work */
  186. node_to_cpumask_map = map;
  187. }
  188. void __cpuinit numa_set_node(int cpu, int node)
  189. {
  190. int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
  191. if (cpu_pda(cpu) && node != NUMA_NO_NODE)
  192. cpu_pda(cpu)->nodenumber = node;
  193. if (cpu_to_node_map)
  194. cpu_to_node_map[cpu] = node;
  195. else if (per_cpu_offset(cpu))
  196. per_cpu(x86_cpu_to_node_map, cpu) = node;
  197. else
  198. pr_debug("Setting node for non-present cpu %d\n", cpu);
  199. }
  200. void __cpuinit numa_clear_node(int cpu)
  201. {
  202. numa_set_node(cpu, NUMA_NO_NODE);
  203. }
  204. #ifndef CONFIG_DEBUG_PER_CPU_MAPS
  205. void __cpuinit numa_add_cpu(int cpu)
  206. {
  207. cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
  208. }
  209. void __cpuinit numa_remove_cpu(int cpu)
  210. {
  211. cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]);
  212. }
  213. #else /* CONFIG_DEBUG_PER_CPU_MAPS */
  214. /*
  215. * --------- debug versions of the numa functions ---------
  216. */
  217. static void __cpuinit numa_set_cpumask(int cpu, int enable)
  218. {
  219. int node = cpu_to_node(cpu);
  220. cpumask_t *mask;
  221. char buf[64];
  222. if (node_to_cpumask_map == NULL) {
  223. printk(KERN_ERR "node_to_cpumask_map NULL\n");
  224. dump_stack();
  225. return;
  226. }
  227. mask = &node_to_cpumask_map[node];
  228. if (enable)
  229. cpu_set(cpu, *mask);
  230. else
  231. cpu_clear(cpu, *mask);
  232. cpulist_scnprintf(buf, sizeof(buf), mask);
  233. printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
  234. enable? "numa_add_cpu":"numa_remove_cpu", cpu, node, buf);
  235. }
  236. void __cpuinit numa_add_cpu(int cpu)
  237. {
  238. numa_set_cpumask(cpu, 1);
  239. }
  240. void __cpuinit numa_remove_cpu(int cpu)
  241. {
  242. numa_set_cpumask(cpu, 0);
  243. }
  244. int cpu_to_node(int cpu)
  245. {
  246. if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
  247. printk(KERN_WARNING
  248. "cpu_to_node(%d): usage too early!\n", cpu);
  249. dump_stack();
  250. return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
  251. }
  252. return per_cpu(x86_cpu_to_node_map, cpu);
  253. }
  254. EXPORT_SYMBOL(cpu_to_node);
  255. /*
  256. * Same function as cpu_to_node() but used if called before the
  257. * per_cpu areas are setup.
  258. */
  259. int early_cpu_to_node(int cpu)
  260. {
  261. if (early_per_cpu_ptr(x86_cpu_to_node_map))
  262. return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
  263. if (!per_cpu_offset(cpu)) {
  264. printk(KERN_WARNING
  265. "early_cpu_to_node(%d): no per_cpu area!\n", cpu);
  266. dump_stack();
  267. return NUMA_NO_NODE;
  268. }
  269. return per_cpu(x86_cpu_to_node_map, cpu);
  270. }
  271. /* empty cpumask */
  272. static const cpumask_t cpu_mask_none;
  273. /*
  274. * Returns a pointer to the bitmask of CPUs on Node 'node'.
  275. */
  276. const cpumask_t *cpumask_of_node(int node)
  277. {
  278. if (node_to_cpumask_map == NULL) {
  279. printk(KERN_WARNING
  280. "cpumask_of_node(%d): no node_to_cpumask_map!\n",
  281. node);
  282. dump_stack();
  283. return (const cpumask_t *)&cpu_online_map;
  284. }
  285. if (node >= nr_node_ids) {
  286. printk(KERN_WARNING
  287. "cpumask_of_node(%d): node > nr_node_ids(%d)\n",
  288. node, nr_node_ids);
  289. dump_stack();
  290. return &cpu_mask_none;
  291. }
  292. return &node_to_cpumask_map[node];
  293. }
  294. EXPORT_SYMBOL(cpumask_of_node);
  295. /*
  296. * Returns a bitmask of CPUs on Node 'node'.
  297. *
  298. * Side note: this function creates the returned cpumask on the stack
  299. * so with a high NR_CPUS count, excessive stack space is used. The
  300. * node_to_cpumask_ptr function should be used whenever possible.
  301. */
  302. cpumask_t node_to_cpumask(int node)
  303. {
  304. if (node_to_cpumask_map == NULL) {
  305. printk(KERN_WARNING
  306. "node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
  307. dump_stack();
  308. return cpu_online_map;
  309. }
  310. if (node >= nr_node_ids) {
  311. printk(KERN_WARNING
  312. "node_to_cpumask(%d): node > nr_node_ids(%d)\n",
  313. node, nr_node_ids);
  314. dump_stack();
  315. return cpu_mask_none;
  316. }
  317. return node_to_cpumask_map[node];
  318. }
  319. EXPORT_SYMBOL(node_to_cpumask);
  320. /*
  321. * --------- end of debug versions of the numa functions ---------
  322. */
  323. #endif /* CONFIG_DEBUG_PER_CPU_MAPS */
  324. #endif /* X86_64_NUMA */