Makefile 54 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597
  1. VERSION = 2
  2. PATCHLEVEL = 6
  3. SUBLEVEL = 31
  4. EXTRAVERSION =
  5. NAME = Man-Eating Seals of Antiquity
  6. # *DOCUMENTATION*
  7. # To see a list of typical targets execute "make help"
  8. # More info can be located in ./README
  9. # Comments in this file are targeted only to the developer, do not
  10. # expect to learn how to build the kernel reading this file.
  11. # Do not:
  12. # o use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour);
  14. # o print "Entering directory ...";
  15. MAKEFLAGS += -rR --no-print-directory
  16. # We are using a recursive build, so we need to do a little thinking
  17. # to get the ordering right.
  18. #
  19. # Most importantly: sub-Makefiles should only ever modify files in
  20. # their own directory. If in some directory we have a dependency on
  21. # a file in another dir (which doesn't happen often, but it's often
  22. # unavoidable when linking the built-in.o targets which finally
  23. # turn into vmlinux), we will call a sub make in that other dir, and
  24. # after that we are sure that everything which is in that other dir
  25. # is now up to date.
  26. #
  27. # The only cases where we need to modify files which have global
  28. # effects are thus separated out and done before the recursive
  29. # descending is started. They are now explicitly listed as the
  30. # prepare rule.
  31. # To put more focus on warnings, be less verbose as default
  32. # Use 'make V=1' to see the full commands
  33. ifeq ("$(origin V)", "command line")
  34. KBUILD_VERBOSE = $(V)
  35. endif
  36. ifndef KBUILD_VERBOSE
  37. KBUILD_VERBOSE = 0
  38. endif
  39. # Call a source code checker (by default, "sparse") as part of the
  40. # C compilation.
  41. #
  42. # Use 'make C=1' to enable checking of only re-compiled files.
  43. # Use 'make C=2' to enable checking of *all* source files, regardless
  44. # of whether they are re-compiled or not.
  45. #
  46. # See the file "Documentation/sparse.txt" for more details, including
  47. # where to get the "sparse" utility.
  48. ifeq ("$(origin C)", "command line")
  49. KBUILD_CHECKSRC = $(C)
  50. endif
  51. ifndef KBUILD_CHECKSRC
  52. KBUILD_CHECKSRC = 0
  53. endif
  54. # Use make M=dir to specify directory of external module to build
  55. # Old syntax make ... SUBDIRS=$PWD is still supported
  56. # Setting the environment variable KBUILD_EXTMOD take precedence
  57. ifdef SUBDIRS
  58. KBUILD_EXTMOD ?= $(SUBDIRS)
  59. endif
  60. ifeq ("$(origin M)", "command line")
  61. KBUILD_EXTMOD := $(M)
  62. endif
  63. # kbuild supports saving output files in a separate directory.
  64. # To locate output files in a separate directory two syntaxes are supported.
  65. # In both cases the working directory must be the root of the kernel src.
  66. # 1) O=
  67. # Use "make O=dir/to/store/output/files/"
  68. #
  69. # 2) Set KBUILD_OUTPUT
  70. # Set the environment variable KBUILD_OUTPUT to point to the directory
  71. # where the output files shall be placed.
  72. # export KBUILD_OUTPUT=dir/to/store/output/files/
  73. # make
  74. #
  75. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  76. # variable.
  77. # KBUILD_SRC is set on invocation of make in OBJ directory
  78. # KBUILD_SRC is not intended to be used by the regular user (for now)
  79. ifeq ($(KBUILD_SRC),)
  80. # OK, Make called in directory where kernel src resides
  81. # Do we want to locate output files in a separate directory?
  82. ifeq ("$(origin O)", "command line")
  83. KBUILD_OUTPUT := $(O)
  84. endif
  85. # That's our default target when none is given on the command line
  86. PHONY := _all
  87. _all:
  88. # Cancel implicit rules on top Makefile
  89. $(CURDIR)/Makefile Makefile: ;
  90. ifneq ($(KBUILD_OUTPUT),)
  91. # Invoke a second make in the output directory, passing relevant variables
  92. # check that the output directory actually exists
  93. saved-output := $(KBUILD_OUTPUT)
  94. KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
  95. $(if $(KBUILD_OUTPUT),, \
  96. $(error output directory "$(saved-output)" does not exist))
  97. PHONY += $(MAKECMDGOALS) sub-make
  98. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  99. $(Q)@:
  100. sub-make: FORCE
  101. $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
  102. KBUILD_SRC=$(CURDIR) \
  103. KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
  104. $(filter-out _all sub-make,$(MAKECMDGOALS))
  105. # Leave processing to above invocation of make
  106. skip-makefile := 1
  107. endif # ifneq ($(KBUILD_OUTPUT),)
  108. endif # ifeq ($(KBUILD_SRC),)
  109. # We process the rest of the Makefile if this is the final invocation of make
  110. ifeq ($(skip-makefile),)
  111. # If building an external module we do not care about the all: rule
  112. # but instead _all depend on modules
  113. PHONY += all
  114. ifeq ($(KBUILD_EXTMOD),)
  115. _all: all
  116. else
  117. _all: modules
  118. endif
  119. srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
  120. objtree := $(CURDIR)
  121. src := $(srctree)
  122. obj := $(objtree)
  123. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  124. export srctree objtree VPATH
  125. # SUBARCH tells the usermode build what the underlying arch is. That is set
  126. # first, and if a usermode build is happening, the "ARCH=um" on the command
  127. # line overrides the setting of ARCH below. If a native build is happening,
  128. # then ARCH is assigned, getting whatever value it gets normally, and
  129. # SUBARCH is subsequently ignored.
  130. SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
  131. -e s/arm.*/arm/ -e s/sa110/arm/ \
  132. -e s/s390x/s390/ -e s/parisc64/parisc/ \
  133. -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
  134. -e s/sh[234].*/sh/ )
  135. # Cross compiling and selecting different set of gcc/bin-utils
  136. # ---------------------------------------------------------------------------
  137. #
  138. # When performing cross compilation for other architectures ARCH shall be set
  139. # to the target architecture. (See arch/* for the possibilities).
  140. # ARCH can be set during invocation of make:
  141. # make ARCH=ia64
  142. # Another way is to have ARCH set in the environment.
  143. # The default ARCH is the host where make is executed.
  144. # CROSS_COMPILE specify the prefix used for all executables used
  145. # during compilation. Only gcc and related bin-utils executables
  146. # are prefixed with $(CROSS_COMPILE).
  147. # CROSS_COMPILE can be set on the command line
  148. # make CROSS_COMPILE=ia64-linux-
  149. # Alternatively CROSS_COMPILE can be set in the environment.
  150. # Default value for CROSS_COMPILE is not to prefix executables
  151. # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
  152. export KBUILD_BUILDHOST := $(SUBARCH)
  153. ARCH ?= $(SUBARCH)
  154. CROSS_COMPILE ?=
  155. # Architecture as present in compile.h
  156. UTS_MACHINE := $(ARCH)
  157. SRCARCH := $(ARCH)
  158. # Additional ARCH settings for x86
  159. ifeq ($(ARCH),i386)
  160. SRCARCH := x86
  161. endif
  162. ifeq ($(ARCH),x86_64)
  163. SRCARCH := x86
  164. endif
  165. # Additional ARCH settings for sparc
  166. ifeq ($(ARCH),sparc64)
  167. SRCARCH := sparc
  168. endif
  169. # Additional ARCH settings for sh
  170. ifeq ($(ARCH),sh64)
  171. SRCARCH := sh
  172. endif
  173. # Where to locate arch specific headers
  174. hdr-arch := $(SRCARCH)
  175. ifeq ($(ARCH),m68knommu)
  176. hdr-arch := m68k
  177. endif
  178. KCONFIG_CONFIG ?= .config
  179. # SHELL used by kbuild
  180. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  181. else if [ -x /bin/bash ]; then echo /bin/bash; \
  182. else echo sh; fi ; fi)
  183. HOSTCC = gcc
  184. HOSTCXX = g++
  185. HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
  186. HOSTCXXFLAGS = -O2
  187. # Decide whether to build built-in, modular, or both.
  188. # Normally, just do built-in.
  189. KBUILD_MODULES :=
  190. KBUILD_BUILTIN := 1
  191. # If we have only "make modules", don't compile built-in objects.
  192. # When we're building modules with modversions, we need to consider
  193. # the built-in objects during the descend as well, in order to
  194. # make sure the checksums are up to date before we record them.
  195. ifeq ($(MAKECMDGOALS),modules)
  196. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  197. endif
  198. # If we have "make <whatever> modules", compile modules
  199. # in addition to whatever we do anyway.
  200. # Just "make" or "make all" shall build modules as well
  201. ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  202. KBUILD_MODULES := 1
  203. endif
  204. ifeq ($(MAKECMDGOALS),)
  205. KBUILD_MODULES := 1
  206. endif
  207. export KBUILD_MODULES KBUILD_BUILTIN
  208. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  209. # Beautify output
  210. # ---------------------------------------------------------------------------
  211. #
  212. # Normally, we echo the whole command before executing it. By making
  213. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  214. # $(quiet) to choose other forms of output instead, e.g.
  215. #
  216. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  217. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  218. #
  219. # If $(quiet) is empty, the whole command will be printed.
  220. # If it is set to "quiet_", only the short version will be printed.
  221. # If it is set to "silent_", nothing will be printed at all, since
  222. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  223. #
  224. # A simple variant is to prefix commands with $(Q) - that's useful
  225. # for commands that shall be hidden in non-verbose mode.
  226. #
  227. # $(Q)ln $@ :<
  228. #
  229. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  230. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  231. ifeq ($(KBUILD_VERBOSE),1)
  232. quiet =
  233. Q =
  234. else
  235. quiet=quiet_
  236. Q = @
  237. endif
  238. # If the user is running make -s (silent mode), suppress echoing of
  239. # commands
  240. ifneq ($(findstring s,$(MAKEFLAGS)),)
  241. quiet=silent_
  242. endif
  243. export quiet Q KBUILD_VERBOSE
  244. # Look for make include files relative to root of kernel src
  245. MAKEFLAGS += --include-dir=$(srctree)
  246. # We need some generic definitions (do not try to remake the file).
  247. $(srctree)/scripts/Kbuild.include: ;
  248. include $(srctree)/scripts/Kbuild.include
  249. # Make variables (CC, etc...)
  250. AS = $(CROSS_COMPILE)as
  251. LD = $(CROSS_COMPILE)ld
  252. CC = $(CROSS_COMPILE)gcc
  253. CPP = $(CC) -E
  254. AR = $(CROSS_COMPILE)ar
  255. NM = $(CROSS_COMPILE)nm
  256. STRIP = $(CROSS_COMPILE)strip
  257. OBJCOPY = $(CROSS_COMPILE)objcopy
  258. OBJDUMP = $(CROSS_COMPILE)objdump
  259. AWK = awk
  260. GENKSYMS = scripts/genksyms/genksyms
  261. INSTALLKERNEL := installkernel
  262. DEPMOD = /sbin/depmod
  263. KALLSYMS = scripts/kallsyms
  264. PERL = perl
  265. CHECK = sparse
  266. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  267. -Wbitwise -Wno-return-void $(CF)
  268. MODFLAGS = -DMODULE
  269. CFLAGS_MODULE = $(MODFLAGS)
  270. AFLAGS_MODULE = $(MODFLAGS)
  271. LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds
  272. CFLAGS_KERNEL =
  273. AFLAGS_KERNEL =
  274. CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
  275. # Use LINUXINCLUDE when you must reference the include/ directory.
  276. # Needed to be compatible with the O= option
  277. LINUXINCLUDE := -Iinclude \
  278. $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
  279. -I$(srctree)/arch/$(hdr-arch)/include \
  280. -include include/linux/autoconf.h
  281. KBUILD_CPPFLAGS := -D__KERNEL__
  282. KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
  283. -fno-strict-aliasing -fno-common \
  284. -Werror-implicit-function-declaration \
  285. -Wno-format-security \
  286. -fno-delete-null-pointer-checks
  287. KBUILD_AFLAGS := -D__ASSEMBLY__
  288. # Read KERNELRELEASE from include/config/kernel.release (if it exists)
  289. KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
  290. KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  291. export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
  292. export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
  293. export CPP AR NM STRIP OBJCOPY OBJDUMP
  294. export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
  295. export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
  296. export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
  297. export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
  298. export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
  299. # When compiling out-of-tree modules, put MODVERDIR in the module
  300. # tree rather than in the kernel tree. The kernel tree might
  301. # even be read-only.
  302. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  303. # Files to ignore in find ... statements
  304. RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
  305. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
  306. # ===========================================================================
  307. # Rules shared between *config targets and build targets
  308. # Basic helpers built in scripts/
  309. PHONY += scripts_basic
  310. scripts_basic:
  311. $(Q)$(MAKE) $(build)=scripts/basic
  312. # To avoid any implicit rule to kick in, define an empty command.
  313. scripts/basic/%: scripts_basic ;
  314. PHONY += outputmakefile
  315. # outputmakefile generates a Makefile in the output directory, if using a
  316. # separate output directory. This allows convenient use of make in the
  317. # output directory.
  318. outputmakefile:
  319. ifneq ($(KBUILD_SRC),)
  320. $(Q)ln -fsn $(srctree) source
  321. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  322. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  323. endif
  324. # To make sure we do not include .config for any of the *config targets
  325. # catch them early, and hand them over to scripts/kconfig/Makefile
  326. # It is allowed to specify more targets when calling make, including
  327. # mixing *config targets and build targets.
  328. # For example 'make oldconfig all'.
  329. # Detect when mixed targets is specified, and make a second invocation
  330. # of make so .config is not included in this case either (for *config).
  331. no-dot-config-targets := clean mrproper distclean \
  332. cscope TAGS tags help %docs check% \
  333. include/linux/version.h headers_% \
  334. kernelrelease kernelversion
  335. config-targets := 0
  336. mixed-targets := 0
  337. dot-config := 1
  338. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  339. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  340. dot-config := 0
  341. endif
  342. endif
  343. ifeq ($(KBUILD_EXTMOD),)
  344. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  345. config-targets := 1
  346. ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
  347. mixed-targets := 1
  348. endif
  349. endif
  350. endif
  351. ifeq ($(mixed-targets),1)
  352. # ===========================================================================
  353. # We're called with mixed targets (*config and build targets).
  354. # Handle them one by one.
  355. %:: FORCE
  356. $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
  357. else
  358. ifeq ($(config-targets),1)
  359. # ===========================================================================
  360. # *config targets only - make sure prerequisites are updated, and descend
  361. # in scripts/kconfig to make the *config target
  362. # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
  363. # KBUILD_DEFCONFIG may point out an alternative default configuration
  364. # used for 'make defconfig'
  365. include $(srctree)/arch/$(SRCARCH)/Makefile
  366. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  367. config: scripts_basic outputmakefile FORCE
  368. $(Q)mkdir -p include/linux include/config
  369. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  370. %config: scripts_basic outputmakefile FORCE
  371. $(Q)mkdir -p include/linux include/config
  372. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  373. else
  374. # ===========================================================================
  375. # Build targets only - this includes vmlinux, arch specific targets, clean
  376. # targets and others. In general all targets except *config targets.
  377. ifeq ($(KBUILD_EXTMOD),)
  378. # Additional helpers built in scripts/
  379. # Carefully list dependencies so we do not try to build scripts twice
  380. # in parallel
  381. PHONY += scripts
  382. scripts: scripts_basic include/config/auto.conf
  383. $(Q)$(MAKE) $(build)=$(@)
  384. # Objects we will link into vmlinux / subdirs we need to visit
  385. init-y := init/
  386. drivers-y := drivers/ sound/ firmware/
  387. net-y := net/
  388. libs-y := lib/
  389. core-y := usr/
  390. endif # KBUILD_EXTMOD
  391. ifeq ($(dot-config),1)
  392. # Read in config
  393. -include include/config/auto.conf
  394. ifeq ($(KBUILD_EXTMOD),)
  395. # Read in dependencies to all Kconfig* files, make sure to run
  396. # oldconfig if changes are detected.
  397. -include include/config/auto.conf.cmd
  398. # To avoid any implicit rule to kick in, define an empty command
  399. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  400. # If .config is newer than include/config/auto.conf, someone tinkered
  401. # with it and forgot to run make oldconfig.
  402. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  403. # we execute the config step to be sure to catch updated Kconfig files
  404. include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  405. $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
  406. else
  407. # external modules needs include/linux/autoconf.h and include/config/auto.conf
  408. # but do not care if they are up-to-date. Use auto.conf to trigger the test
  409. PHONY += include/config/auto.conf
  410. include/config/auto.conf:
  411. $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
  412. echo; \
  413. echo " ERROR: Kernel configuration is invalid."; \
  414. echo " include/linux/autoconf.h or $@ are missing."; \
  415. echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
  416. echo; \
  417. /bin/false)
  418. endif # KBUILD_EXTMOD
  419. else
  420. # Dummy target needed, because used as prerequisite
  421. include/config/auto.conf: ;
  422. endif # $(dot-config)
  423. # The all: target is the default when no target is given on the
  424. # command line.
  425. # This allow a user to issue only 'make' to build a kernel including modules
  426. # Defaults vmlinux but it is usually overridden in the arch makefile
  427. all: vmlinux
  428. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  429. KBUILD_CFLAGS += -Os
  430. else
  431. KBUILD_CFLAGS += -O2
  432. endif
  433. include $(srctree)/arch/$(SRCARCH)/Makefile
  434. ifneq ($(CONFIG_FRAME_WARN),0)
  435. KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
  436. endif
  437. # Force gcc to behave correct even for buggy distributions
  438. ifndef CONFIG_CC_STACKPROTECTOR
  439. KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
  440. endif
  441. ifdef CONFIG_FRAME_POINTER
  442. KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
  443. else
  444. KBUILD_CFLAGS += -fomit-frame-pointer
  445. endif
  446. ifdef CONFIG_DEBUG_INFO
  447. KBUILD_CFLAGS += -g
  448. KBUILD_AFLAGS += -gdwarf-2
  449. endif
  450. ifdef CONFIG_FUNCTION_TRACER
  451. KBUILD_CFLAGS += -pg
  452. endif
  453. # We trigger additional mismatches with less inlining
  454. ifdef CONFIG_DEBUG_SECTION_MISMATCH
  455. KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
  456. endif
  457. # arch Makefile may override CC so keep this after arch Makefile is included
  458. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  459. CHECKFLAGS += $(NOSTDINC_FLAGS)
  460. # warn about C99 declaration after statement
  461. KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
  462. # disable pointer signed / unsigned warnings in gcc 4.0
  463. KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
  464. # disable invalid "can't wrap" optimizations for signed / pointers
  465. KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
  466. # revert to pre-gcc-4.4 behaviour of .eh_frame
  467. KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
  468. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  469. # But warn user when we do so
  470. warn-assign = \
  471. $(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
  472. ifneq ($(KCPPFLAGS),)
  473. $(call warn-assign,CPPFLAGS)
  474. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  475. endif
  476. ifneq ($(KAFLAGS),)
  477. $(call warn-assign,AFLAGS)
  478. KBUILD_AFLAGS += $(KAFLAGS)
  479. endif
  480. ifneq ($(KCFLAGS),)
  481. $(call warn-assign,CFLAGS)
  482. KBUILD_CFLAGS += $(KCFLAGS)
  483. endif
  484. # Use --build-id when available.
  485. LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
  486. $(call ld-option, -Wl$(comma)--build-id,))
  487. LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
  488. LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
  489. ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
  490. LDFLAGS_vmlinux += -X
  491. endif
  492. # Default kernel image to build when no specific target is given.
  493. # KBUILD_IMAGE may be overruled on the command line or
  494. # set in the environment
  495. # Also any assignments in arch/$(ARCH)/Makefile take precedence over
  496. # this default value
  497. export KBUILD_IMAGE ?= vmlinux
  498. #
  499. # INSTALL_PATH specifies where to place the updated kernel and system map
  500. # images. Default is /boot, but you can set it to other values
  501. export INSTALL_PATH ?= /boot
  502. #
  503. # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
  504. # relocations required by build roots. This is not defined in the
  505. # makefile but the argument can be passed to make if needed.
  506. #
  507. MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
  508. export MODLIB
  509. #
  510. # INSTALL_MOD_STRIP, if defined, will cause modules to be
  511. # stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
  512. # the default option --strip-debug will be used. Otherwise,
  513. # INSTALL_MOD_STRIP will used as the options to the strip command.
  514. ifdef INSTALL_MOD_STRIP
  515. ifeq ($(INSTALL_MOD_STRIP),1)
  516. mod_strip_cmd = $(STRIP) --strip-debug
  517. else
  518. mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
  519. endif # INSTALL_MOD_STRIP=1
  520. else
  521. mod_strip_cmd = true
  522. endif # INSTALL_MOD_STRIP
  523. export mod_strip_cmd
  524. ifeq ($(KBUILD_EXTMOD),)
  525. core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
  526. vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
  527. $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
  528. $(net-y) $(net-m) $(libs-y) $(libs-m)))
  529. vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
  530. $(init-n) $(init-) \
  531. $(core-n) $(core-) $(drivers-n) $(drivers-) \
  532. $(net-n) $(net-) $(libs-n) $(libs-))))
  533. init-y := $(patsubst %/, %/built-in.o, $(init-y))
  534. core-y := $(patsubst %/, %/built-in.o, $(core-y))
  535. drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
  536. net-y := $(patsubst %/, %/built-in.o, $(net-y))
  537. libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
  538. libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
  539. libs-y := $(libs-y1) $(libs-y2)
  540. # Build vmlinux
  541. # ---------------------------------------------------------------------------
  542. # vmlinux is built from the objects selected by $(vmlinux-init) and
  543. # $(vmlinux-main). Most are built-in.o files from top-level directories
  544. # in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
  545. # Ordering when linking is important, and $(vmlinux-init) must be first.
  546. #
  547. # vmlinux
  548. # ^
  549. # |
  550. # +-< $(vmlinux-init)
  551. # | +--< init/version.o + more
  552. # |
  553. # +--< $(vmlinux-main)
  554. # | +--< driver/built-in.o mm/built-in.o + more
  555. # |
  556. # +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
  557. #
  558. # vmlinux version (uname -v) cannot be updated during normal
  559. # descending-into-subdirs phase since we do not yet know if we need to
  560. # update vmlinux.
  561. # Therefore this step is delayed until just before final link of vmlinux -
  562. # except in the kallsyms case where it is done just before adding the
  563. # symbols to the kernel.
  564. #
  565. # System.map is generated to document addresses of all kernel symbols
  566. vmlinux-init := $(head-y) $(init-y)
  567. vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
  568. vmlinux-all := $(vmlinux-init) $(vmlinux-main)
  569. vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
  570. export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
  571. # Rule to link vmlinux - also used during CONFIG_KALLSYMS
  572. # May be overridden by arch/$(ARCH)/Makefile
  573. quiet_cmd_vmlinux__ ?= LD $@
  574. cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
  575. -T $(vmlinux-lds) $(vmlinux-init) \
  576. --start-group $(vmlinux-main) --end-group \
  577. $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
  578. # Generate new vmlinux version
  579. quiet_cmd_vmlinux_version = GEN .version
  580. cmd_vmlinux_version = set -e; \
  581. if [ ! -r .version ]; then \
  582. rm -f .version; \
  583. echo 1 >.version; \
  584. else \
  585. mv .version .old_version; \
  586. expr 0$$(cat .old_version) + 1 >.version; \
  587. fi; \
  588. $(MAKE) $(build)=init
  589. # Generate System.map
  590. quiet_cmd_sysmap = SYSMAP
  591. cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
  592. # Link of vmlinux
  593. # If CONFIG_KALLSYMS is set .version is already updated
  594. # Generate System.map and verify that the content is consistent
  595. # Use + in front of the vmlinux_version rule to silent warning with make -j2
  596. # First command is ':' to allow us to use + in front of the rule
  597. define rule_vmlinux__
  598. :
  599. $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
  600. $(call cmd,vmlinux__)
  601. $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
  602. $(Q)$(if $($(quiet)cmd_sysmap), \
  603. echo ' $($(quiet)cmd_sysmap) System.map' &&) \
  604. $(cmd_sysmap) $@ System.map; \
  605. if [ $$? -ne 0 ]; then \
  606. rm -f $@; \
  607. /bin/false; \
  608. fi;
  609. $(verify_kallsyms)
  610. endef
  611. ifdef CONFIG_KALLSYMS
  612. # Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
  613. # It's a three stage process:
  614. # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
  615. # empty
  616. # Running kallsyms on that gives us .tmp_kallsyms1.o with
  617. # the right size - vmlinux version (uname -v) is updated during this step
  618. # o .tmp_vmlinux2 now has a __kallsyms section of the right size,
  619. # but due to the added section, some addresses have shifted.
  620. # From here, we generate a correct .tmp_kallsyms2.o
  621. # o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
  622. # o Verify that the System.map from vmlinux matches the map from
  623. # .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
  624. # o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
  625. # .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
  626. # temporary bypass to allow the kernel to be built while the
  627. # maintainers work out what went wrong with kallsyms.
  628. ifdef CONFIG_KALLSYMS_EXTRA_PASS
  629. last_kallsyms := 3
  630. else
  631. last_kallsyms := 2
  632. endif
  633. kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
  634. define verify_kallsyms
  635. $(Q)$(if $($(quiet)cmd_sysmap), \
  636. echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
  637. $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
  638. $(Q)cmp -s System.map .tmp_System.map || \
  639. (echo Inconsistent kallsyms data; \
  640. echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
  641. rm .tmp_kallsyms* ; /bin/false )
  642. endef
  643. # Update vmlinux version before link
  644. # Use + in front of this rule to silent warning about make -j1
  645. # First command is ':' to allow us to use + in front of this rule
  646. cmd_ksym_ld = $(cmd_vmlinux__)
  647. define rule_ksym_ld
  648. :
  649. +$(call cmd,vmlinux_version)
  650. $(call cmd,vmlinux__)
  651. $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
  652. endef
  653. # Generate .S file with all kernel symbols
  654. quiet_cmd_kallsyms = KSYM $@
  655. cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
  656. $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
  657. .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
  658. $(call if_changed_dep,as_o_S)
  659. .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
  660. $(call cmd,kallsyms)
  661. # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
  662. .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
  663. $(call if_changed_rule,ksym_ld)
  664. .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
  665. $(call if_changed,vmlinux__)
  666. .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
  667. $(call if_changed,vmlinux__)
  668. # Needs to visit scripts/ before $(KALLSYMS) can be used.
  669. $(KALLSYMS): scripts ;
  670. # Generate some data for debugging strange kallsyms problems
  671. debug_kallsyms: .tmp_map$(last_kallsyms)
  672. .tmp_map%: .tmp_vmlinux% FORCE
  673. ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
  674. .tmp_map3: .tmp_map2
  675. .tmp_map2: .tmp_map1
  676. endif # ifdef CONFIG_KALLSYMS
  677. # Do modpost on a prelinked vmlinux. The finally linked vmlinux has
  678. # relevant sections renamed as per the linker script.
  679. quiet_cmd_vmlinux-modpost = LD $@
  680. cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
  681. $(vmlinux-init) --start-group $(vmlinux-main) --end-group \
  682. $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
  683. define rule_vmlinux-modpost
  684. :
  685. +$(call cmd,vmlinux-modpost)
  686. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
  687. $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
  688. endef
  689. # vmlinux image - including updated kernel symbols
  690. vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
  691. ifdef CONFIG_HEADERS_CHECK
  692. $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
  693. endif
  694. ifdef CONFIG_SAMPLES
  695. $(Q)$(MAKE) $(build)=samples
  696. endif
  697. ifdef CONFIG_BUILD_DOCSRC
  698. $(Q)$(MAKE) $(build)=Documentation
  699. endif
  700. $(call vmlinux-modpost)
  701. $(call if_changed_rule,vmlinux__)
  702. $(Q)rm -f .old_version
  703. # build vmlinux.o first to catch section mismatch errors early
  704. ifdef CONFIG_KALLSYMS
  705. .tmp_vmlinux1: vmlinux.o
  706. endif
  707. modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
  708. vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
  709. $(call if_changed_rule,vmlinux-modpost)
  710. # The actual objects are generated when descending,
  711. # make sure no implicit rule kicks in
  712. $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
  713. # Handle descending into subdirectories listed in $(vmlinux-dirs)
  714. # Preset locale variables to speed up the build process. Limit locale
  715. # tweaks to this spot to avoid wrong language settings when running
  716. # make menuconfig etc.
  717. # Error messages still appears in the original language
  718. PHONY += $(vmlinux-dirs)
  719. $(vmlinux-dirs): prepare scripts
  720. $(Q)$(MAKE) $(build)=$@
  721. # Build the kernel release string
  722. #
  723. # The KERNELRELEASE value built here is stored in the file
  724. # include/config/kernel.release, and is used when executing several
  725. # make targets, such as "make install" or "make modules_install."
  726. #
  727. # The eventual kernel release string consists of the following fields,
  728. # shown in a hierarchical format to show how smaller parts are concatenated
  729. # to form the larger and final value, with values coming from places like
  730. # the Makefile, kernel config options, make command line options and/or
  731. # SCM tag information.
  732. #
  733. # $(KERNELVERSION)
  734. # $(VERSION) eg, 2
  735. # $(PATCHLEVEL) eg, 6
  736. # $(SUBLEVEL) eg, 18
  737. # $(EXTRAVERSION) eg, -rc6
  738. # $(localver-full)
  739. # $(localver)
  740. # localversion* (files without backups, containing '~')
  741. # $(CONFIG_LOCALVERSION) (from kernel config setting)
  742. # $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set)
  743. # ./scripts/setlocalversion (SCM tag, if one exists)
  744. # $(LOCALVERSION) (from make command line if provided)
  745. #
  746. # Note how the final $(localver-auto) string is included *only* if the
  747. # kernel config option CONFIG_LOCALVERSION_AUTO is selected. Also, at the
  748. # moment, only git is supported but other SCMs can edit the script
  749. # scripts/setlocalversion and add the appropriate checks as needed.
  750. pattern = ".*/localversion[^~]*"
  751. string = $(shell cat /dev/null \
  752. `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
  753. localver = $(subst $(space),, $(string) \
  754. $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
  755. # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
  756. # and if the SCM is know a tag from the SCM is appended.
  757. # The appended tag is determined by the SCM used.
  758. #
  759. # .scmversion is used when generating rpm packages so we do not loose
  760. # the version information from the SCM when we do the build of the kernel
  761. # from the copied source
  762. ifdef CONFIG_LOCALVERSION_AUTO
  763. ifeq ($(wildcard .scmversion),)
  764. _localver-auto = $(shell $(CONFIG_SHELL) \
  765. $(srctree)/scripts/setlocalversion $(srctree))
  766. else
  767. _localver-auto = $(shell cat .scmversion 2> /dev/null)
  768. endif
  769. localver-auto = $(LOCALVERSION)$(_localver-auto)
  770. endif
  771. localver-full = $(localver)$(localver-auto)
  772. # Store (new) KERNELRELASE string in include/config/kernel.release
  773. kernelrelease = $(KERNELVERSION)$(localver-full)
  774. include/config/kernel.release: include/config/auto.conf FORCE
  775. $(Q)rm -f $@
  776. $(Q)echo $(kernelrelease) > $@
  777. # Things we need to do before we recursively start building the kernel
  778. # or the modules are listed in "prepare".
  779. # A multi level approach is used. prepareN is processed before prepareN-1.
  780. # archprepare is used in arch Makefiles and when processed asm symlink,
  781. # version.h and scripts_basic is processed / created.
  782. # Listed in dependency order
  783. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  784. # prepare3 is used to check if we are building in a separate output directory,
  785. # and if so do:
  786. # 1) Check that make has not been executed in the kernel src $(srctree)
  787. # 2) Create the include2 directory, used for the second asm symlink
  788. prepare3: include/config/kernel.release
  789. ifneq ($(KBUILD_SRC),)
  790. @$(kecho) ' Using $(srctree) as source for kernel'
  791. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  792. echo " $(srctree) is not clean, please run 'make mrproper'";\
  793. echo " in the '$(srctree)' directory.";\
  794. /bin/false; \
  795. fi;
  796. $(Q)if [ ! -d include2 ]; then \
  797. mkdir -p include2; \
  798. ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
  799. fi
  800. endif
  801. # prepare2 creates a makefile if using a separate output directory
  802. prepare2: prepare3 outputmakefile
  803. prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
  804. include/asm include/config/auto.conf
  805. $(cmd_crmodverdir)
  806. archprepare: prepare1 scripts_basic
  807. prepare0: archprepare FORCE
  808. $(Q)$(MAKE) $(build)=.
  809. $(Q)$(MAKE) $(build)=. missing-syscalls
  810. # All the preparing..
  811. prepare: prepare0
  812. # Leave this as default for preprocessing vmlinux.lds.S, which is now
  813. # done in arch/$(ARCH)/kernel/Makefile
  814. export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
  815. # The asm symlink changes when $(ARCH) changes.
  816. # Detect this and ask user to run make mrproper
  817. # If asm is a stale symlink (point to dir that does not exist) remove it
  818. define check-symlink
  819. set -e; \
  820. if [ -L include/asm ]; then \
  821. asmlink=`readlink include/asm | cut -d '-' -f 2`; \
  822. if [ "$$asmlink" != "$(SRCARCH)" ]; then \
  823. echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
  824. echo " set ARCH or save .config and run 'make mrproper' to fix it"; \
  825. exit 1; \
  826. fi; \
  827. test -e $$asmlink || rm include/asm; \
  828. elif [ -d include/asm ]; then \
  829. echo "ERROR: $@ is a directory but a symlink was expected";\
  830. exit 1; \
  831. fi
  832. endef
  833. # We create the target directory of the symlink if it does
  834. # not exist so the test in check-symlink works and we have a
  835. # directory for generated filesas used by some architectures.
  836. define create-symlink
  837. if [ ! -L include/asm ]; then \
  838. $(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \
  839. if [ ! -d include/asm-$(SRCARCH) ]; then \
  840. mkdir -p include/asm-$(SRCARCH); \
  841. fi; \
  842. ln -fsn asm-$(SRCARCH) $@; \
  843. fi
  844. endef
  845. include/asm: FORCE
  846. $(Q)$(check-symlink)
  847. $(Q)$(create-symlink)
  848. # Generate some files
  849. # ---------------------------------------------------------------------------
  850. # KERNELRELEASE can change from a few different places, meaning version.h
  851. # needs to be updated, so this check is forced on all builds
  852. uts_len := 64
  853. define filechk_utsrelease.h
  854. if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
  855. echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
  856. exit 1; \
  857. fi; \
  858. (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
  859. endef
  860. define filechk_version.h
  861. (echo \#define LINUX_VERSION_CODE $(shell \
  862. expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
  863. echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
  864. endef
  865. include/linux/version.h: $(srctree)/Makefile FORCE
  866. $(call filechk,version.h)
  867. include/linux/utsrelease.h: include/config/kernel.release FORCE
  868. $(call filechk,utsrelease.h)
  869. PHONY += headerdep
  870. headerdep:
  871. $(Q)find include/ -name '*.h' | xargs --max-args 1 scripts/headerdep.pl
  872. # ---------------------------------------------------------------------------
  873. PHONY += depend dep
  874. depend dep:
  875. @echo '*** Warning: make $@ is unnecessary now.'
  876. # ---------------------------------------------------------------------------
  877. # Firmware install
  878. INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
  879. export INSTALL_FW_PATH
  880. PHONY += firmware_install
  881. firmware_install: FORCE
  882. @mkdir -p $(objtree)/firmware
  883. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
  884. # ---------------------------------------------------------------------------
  885. # Kernel headers
  886. #Default location for installed headers
  887. export INSTALL_HDR_PATH = $(objtree)/usr
  888. hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
  889. # Find out where the Kbuild file is located to support
  890. # arch/$(ARCH)/include/asm
  891. hdr-dir = $(strip \
  892. $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \
  893. arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch)))
  894. # If we do an all arch process set dst to asm-$(hdr-arch)
  895. hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
  896. PHONY += __headers
  897. __headers: include/linux/version.h scripts_basic FORCE
  898. $(Q)$(MAKE) $(build)=scripts scripts/unifdef
  899. PHONY += headers_install_all
  900. headers_install_all:
  901. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
  902. PHONY += headers_install
  903. headers_install: __headers
  904. $(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \
  905. $(error Headers not exportable for the $(SRCARCH) architecture))
  906. $(Q)$(MAKE) $(hdr-inst)=include
  907. $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst)
  908. PHONY += headers_check_all
  909. headers_check_all: headers_install_all
  910. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
  911. PHONY += headers_check
  912. headers_check: headers_install
  913. $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
  914. $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1
  915. # ---------------------------------------------------------------------------
  916. # Modules
  917. ifdef CONFIG_MODULES
  918. # By default, build modules as well
  919. all: modules
  920. # Build modules
  921. #
  922. # A module can be listed more than once in obj-m resulting in
  923. # duplicate lines in modules.order files. Those are removed
  924. # using awk while concatenating to the final file.
  925. PHONY += modules
  926. modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
  927. $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
  928. @$(kecho) ' Building modules, stage 2.';
  929. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  930. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
  931. # Target to prepare building external modules
  932. PHONY += modules_prepare
  933. modules_prepare: prepare scripts
  934. # Target to install modules
  935. PHONY += modules_install
  936. modules_install: _modinst_ _modinst_post
  937. PHONY += _modinst_
  938. _modinst_:
  939. @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
  940. echo "Warning: you may need to install module-init-tools"; \
  941. echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
  942. sleep 1; \
  943. fi
  944. @rm -rf $(MODLIB)/kernel
  945. @rm -f $(MODLIB)/source
  946. @mkdir -p $(MODLIB)/kernel
  947. @ln -s $(srctree) $(MODLIB)/source
  948. @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
  949. rm -f $(MODLIB)/build ; \
  950. ln -s $(objtree) $(MODLIB)/build ; \
  951. fi
  952. @cp -f $(objtree)/modules.order $(MODLIB)/
  953. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
  954. # This depmod is only for convenience to give the initial
  955. # boot a modules.dep even before / is mounted read-write. However the
  956. # boot script depmod is the master version.
  957. PHONY += _modinst_post
  958. _modinst_post: _modinst_
  959. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
  960. $(call cmd,depmod)
  961. else # CONFIG_MODULES
  962. # Modules not configured
  963. # ---------------------------------------------------------------------------
  964. modules modules_install: FORCE
  965. @echo
  966. @echo "The present kernel configuration has modules disabled."
  967. @echo "Type 'make config' and enable loadable module support."
  968. @echo "Then build a kernel with module support enabled."
  969. @echo
  970. @exit 1
  971. endif # CONFIG_MODULES
  972. ###
  973. # Cleaning is done on three levels.
  974. # make clean Delete most generated files
  975. # Leave enough to build external modules
  976. # make mrproper Delete the current configuration, and all generated files
  977. # make distclean Remove editor backup files, patch leftover files and the like
  978. # Directories & files removed with 'make clean'
  979. CLEAN_DIRS += $(MODVERDIR)
  980. CLEAN_FILES += vmlinux System.map \
  981. .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
  982. # Directories & files removed with 'make mrproper'
  983. MRPROPER_DIRS += include/config include2 usr/include include/generated
  984. MRPROPER_FILES += .config .config.old include/asm .version .old_version \
  985. include/linux/autoconf.h include/linux/version.h \
  986. include/linux/utsrelease.h \
  987. include/linux/bounds.h include/asm*/asm-offsets.h \
  988. Module.symvers Module.markers tags TAGS cscope*
  989. # clean - Delete most, but leave enough to build external modules
  990. #
  991. clean: rm-dirs := $(CLEAN_DIRS)
  992. clean: rm-files := $(CLEAN_FILES)
  993. clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
  994. PHONY += $(clean-dirs) clean archclean
  995. $(clean-dirs):
  996. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  997. clean: archclean $(clean-dirs)
  998. $(call cmd,rmdirs)
  999. $(call cmd,rmfiles)
  1000. @find . $(RCS_FIND_IGNORE) \
  1001. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1002. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1003. -o -name '*.symtypes' -o -name 'modules.order' \
  1004. -o -name 'Module.markers' -o -name '.tmp_*.o.*' \
  1005. -o -name '*.gcno' \) -type f -print | xargs rm -f
  1006. # mrproper - Delete all generated files, including .config
  1007. #
  1008. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1009. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1010. mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
  1011. PHONY += $(mrproper-dirs) mrproper archmrproper
  1012. $(mrproper-dirs):
  1013. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1014. mrproper: clean archmrproper $(mrproper-dirs)
  1015. $(call cmd,rmdirs)
  1016. $(call cmd,rmfiles)
  1017. # distclean
  1018. #
  1019. PHONY += distclean
  1020. distclean: mrproper
  1021. @find $(srctree) $(RCS_FIND_IGNORE) \
  1022. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1023. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1024. -o -name '.*.rej' -o -size 0 \
  1025. -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
  1026. -type f -print | xargs rm -f
  1027. # Packaging of the kernel to various formats
  1028. # ---------------------------------------------------------------------------
  1029. # rpm target kept for backward compatibility
  1030. package-dir := $(srctree)/scripts/package
  1031. %pkg: include/config/kernel.release FORCE
  1032. $(Q)$(MAKE) $(build)=$(package-dir) $@
  1033. rpm: include/config/kernel.release FORCE
  1034. $(Q)$(MAKE) $(build)=$(package-dir) $@
  1035. # Brief documentation of the typical targets used
  1036. # ---------------------------------------------------------------------------
  1037. boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
  1038. boards := $(notdir $(boards))
  1039. board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
  1040. board-dirs := $(sort $(notdir $(board-dirs:/=)))
  1041. help:
  1042. @echo 'Cleaning targets:'
  1043. @echo ' clean - Remove most generated files but keep the config and'
  1044. @echo ' enough build support to build external modules'
  1045. @echo ' mrproper - Remove all generated files + config + various backup files'
  1046. @echo ' distclean - mrproper + remove editor backup and patch files'
  1047. @echo ''
  1048. @echo 'Configuration targets:'
  1049. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1050. @echo ''
  1051. @echo 'Other generic targets:'
  1052. @echo ' all - Build all targets marked with [*]'
  1053. @echo '* vmlinux - Build the bare kernel'
  1054. @echo '* modules - Build all modules'
  1055. @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
  1056. @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
  1057. @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
  1058. @echo ' dir/ - Build all files in dir and below'
  1059. @echo ' dir/file.[ois] - Build specified target only'
  1060. @echo ' dir/file.ko - Build module including final link'
  1061. @echo ' modules_prepare - Set up for building external modules'
  1062. @echo ' tags/TAGS - Generate tags file for editors'
  1063. @echo ' cscope - Generate cscope index'
  1064. @echo ' kernelrelease - Output the release version string'
  1065. @echo ' kernelversion - Output the version stored in Makefile'
  1066. @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
  1067. echo ' (default: $(INSTALL_HDR_PATH))'; \
  1068. echo ''
  1069. @echo 'Static analysers'
  1070. @echo ' checkstack - Generate a list of stack hogs'
  1071. @echo ' namespacecheck - Name space analysis on compiled kernel'
  1072. @echo ' versioncheck - Sanity check on version.h usage'
  1073. @echo ' includecheck - Check for duplicate included header files'
  1074. @echo ' export_report - List the usages of all exported symbols'
  1075. @echo ' headers_check - Sanity check on exported headers'
  1076. @echo ' headerdep - Detect inclusion cycles in headers'; \
  1077. echo ''
  1078. @echo 'Kernel packaging:'
  1079. @$(MAKE) $(build)=$(package-dir) help
  1080. @echo ''
  1081. @echo 'Documentation targets:'
  1082. @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
  1083. @echo ''
  1084. @echo 'Architecture specific targets ($(SRCARCH)):'
  1085. @$(if $(archhelp),$(archhelp),\
  1086. echo ' No architecture specific help defined for $(SRCARCH)')
  1087. @echo ''
  1088. @$(if $(boards), \
  1089. $(foreach b, $(boards), \
  1090. printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
  1091. echo '')
  1092. @$(if $(board-dirs), \
  1093. $(foreach b, $(board-dirs), \
  1094. printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
  1095. printf " %-16s - Show all of the above\\n" help-boards; \
  1096. echo '')
  1097. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1098. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1099. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1100. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1101. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1102. @echo ''
  1103. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1104. @echo 'For further info see the ./README file'
  1105. help-board-dirs := $(addprefix help-,$(board-dirs))
  1106. help-boards: $(help-board-dirs)
  1107. boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
  1108. $(help-board-dirs): help-%:
  1109. @echo 'Architecture specific targets ($(SRCARCH) $*):'
  1110. @$(if $(boards-per-dir), \
  1111. $(foreach b, $(boards-per-dir), \
  1112. printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
  1113. echo '')
  1114. # Documentation targets
  1115. # ---------------------------------------------------------------------------
  1116. %docs: scripts_basic FORCE
  1117. $(Q)$(MAKE) $(build)=Documentation/DocBook $@
  1118. else # KBUILD_EXTMOD
  1119. ###
  1120. # External module support.
  1121. # When building external modules the kernel used as basis is considered
  1122. # read-only, and no consistency checks are made and the make
  1123. # system is not used on the basis kernel. If updates are required
  1124. # in the basis kernel ordinary make commands (without M=...) must
  1125. # be used.
  1126. #
  1127. # The following are the only valid targets when building external
  1128. # modules.
  1129. # make M=dir clean Delete all automatically generated files
  1130. # make M=dir modules Make all modules in specified dir
  1131. # make M=dir Same as 'make M=dir modules'
  1132. # make M=dir modules_install
  1133. # Install the modules built in the module directory
  1134. # Assumes install directory is already created
  1135. # We are always building modules
  1136. KBUILD_MODULES := 1
  1137. PHONY += crmodverdir
  1138. crmodverdir:
  1139. $(cmd_crmodverdir)
  1140. PHONY += $(objtree)/Module.symvers
  1141. $(objtree)/Module.symvers:
  1142. @test -e $(objtree)/Module.symvers || ( \
  1143. echo; \
  1144. echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
  1145. echo " is missing; modules will have no dependencies and modversions."; \
  1146. echo )
  1147. module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
  1148. PHONY += $(module-dirs) modules
  1149. $(module-dirs): crmodverdir $(objtree)/Module.symvers
  1150. $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
  1151. modules: $(module-dirs)
  1152. @$(kecho) ' Building modules, stage 2.';
  1153. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1154. PHONY += modules_install
  1155. modules_install: _emodinst_ _emodinst_post
  1156. install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
  1157. PHONY += _emodinst_
  1158. _emodinst_:
  1159. $(Q)mkdir -p $(MODLIB)/$(install-dir)
  1160. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
  1161. PHONY += _emodinst_post
  1162. _emodinst_post: _emodinst_
  1163. $(call cmd,depmod)
  1164. clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
  1165. PHONY += $(clean-dirs) clean
  1166. $(clean-dirs):
  1167. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1168. clean: rm-dirs := $(MODVERDIR)
  1169. clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
  1170. $(KBUILD_EXTMOD)/Module.markers \
  1171. $(KBUILD_EXTMOD)/modules.order
  1172. clean: $(clean-dirs)
  1173. $(call cmd,rmdirs)
  1174. $(call cmd,rmfiles)
  1175. @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
  1176. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1177. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1178. -o -name '*.gcno' \) -type f -print | xargs rm -f
  1179. help:
  1180. @echo ' Building external modules.'
  1181. @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
  1182. @echo ''
  1183. @echo ' modules - default target, build the module(s)'
  1184. @echo ' modules_install - install the module'
  1185. @echo ' clean - remove generated files in module directory only'
  1186. @echo ''
  1187. # Dummies...
  1188. PHONY += prepare scripts
  1189. prepare: ;
  1190. scripts: ;
  1191. endif # KBUILD_EXTMOD
  1192. # Generate tags for editors
  1193. # ---------------------------------------------------------------------------
  1194. quiet_cmd_tags = GEN $@
  1195. cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
  1196. tags TAGS cscope: FORCE
  1197. $(call cmd,tags)
  1198. # Scripts to check various things for consistency
  1199. # ---------------------------------------------------------------------------
  1200. includecheck:
  1201. find * $(RCS_FIND_IGNORE) \
  1202. -name '*.[hcS]' -type f -print | sort \
  1203. | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
  1204. versioncheck:
  1205. find * $(RCS_FIND_IGNORE) \
  1206. -name '*.[hcS]' -type f -print | sort \
  1207. | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
  1208. namespacecheck:
  1209. $(PERL) $(srctree)/scripts/namespace.pl
  1210. export_report:
  1211. $(PERL) $(srctree)/scripts/export_report.pl
  1212. endif #ifeq ($(config-targets),1)
  1213. endif #ifeq ($(mixed-targets),1)
  1214. PHONY += checkstack kernelrelease kernelversion
  1215. # UML needs a little special treatment here. It wants to use the host
  1216. # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
  1217. # else wants $(ARCH), including people doing cross-builds, which means
  1218. # that $(SUBARCH) doesn't work here.
  1219. ifeq ($(ARCH), um)
  1220. CHECKSTACK_ARCH := $(SUBARCH)
  1221. else
  1222. CHECKSTACK_ARCH := $(ARCH)
  1223. endif
  1224. checkstack:
  1225. $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
  1226. $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
  1227. kernelrelease:
  1228. $(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
  1229. $(error kernelrelease not valid - run 'make prepare' to update it))
  1230. kernelversion:
  1231. @echo $(KERNELVERSION)
  1232. # Single targets
  1233. # ---------------------------------------------------------------------------
  1234. # Single targets are compatible with:
  1235. # - build with mixed source and output
  1236. # - build with separate output dir 'make O=...'
  1237. # - external modules
  1238. #
  1239. # target-dir => where to store outputfile
  1240. # build-dir => directory in kernel source tree to use
  1241. ifeq ($(KBUILD_EXTMOD),)
  1242. build-dir = $(patsubst %/,%,$(dir $@))
  1243. target-dir = $(dir $@)
  1244. else
  1245. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1246. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1247. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1248. endif
  1249. %.s: %.c prepare scripts FORCE
  1250. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1251. %.i: %.c prepare scripts FORCE
  1252. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1253. %.o: %.c prepare scripts FORCE
  1254. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1255. %.lst: %.c prepare scripts FORCE
  1256. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1257. %.s: %.S prepare scripts FORCE
  1258. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1259. %.o: %.S prepare scripts FORCE
  1260. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1261. %.symtypes: %.c prepare scripts FORCE
  1262. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1263. # Modules
  1264. /: prepare scripts FORCE
  1265. $(cmd_crmodverdir)
  1266. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1267. $(build)=$(build-dir)
  1268. %/: prepare scripts FORCE
  1269. $(cmd_crmodverdir)
  1270. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1271. $(build)=$(build-dir)
  1272. %.ko: prepare scripts FORCE
  1273. $(cmd_crmodverdir)
  1274. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1275. $(build)=$(build-dir) $(@:.ko=.o)
  1276. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1277. # FIXME Should go into a make.lib or something
  1278. # ===========================================================================
  1279. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1280. cmd_rmdirs = rm -rf $(rm-dirs)
  1281. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1282. cmd_rmfiles = rm -f $(rm-files)
  1283. # Run depmod only if we have System.map and depmod is executable
  1284. quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
  1285. cmd_depmod = \
  1286. if [ -r System.map -a -x $(DEPMOD) ]; then \
  1287. $(DEPMOD) -ae -F System.map \
  1288. $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
  1289. $(KERNELRELEASE); \
  1290. fi
  1291. # Create temporary dir for module support files
  1292. # clean it up only when building all modules
  1293. cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
  1294. $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
  1295. a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
  1296. $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
  1297. $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
  1298. quiet_cmd_as_o_S = AS $@
  1299. cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
  1300. # read all saved command lines
  1301. targets := $(wildcard $(sort $(targets)))
  1302. cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
  1303. ifneq ($(cmd_files),)
  1304. $(cmd_files): ; # Do not try to update included dependency files
  1305. include $(cmd_files)
  1306. endif
  1307. # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
  1308. # Usage:
  1309. # $(Q)$(MAKE) $(clean)=dir
  1310. clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
  1311. endif # skip-makefile
  1312. PHONY += FORCE
  1313. FORCE:
  1314. # Declare the contents of the .PHONY variable as phony. We keep that
  1315. # information in a variable so we can use it in if_changed and friends.
  1316. .PHONY: $(PHONY)