Kconfig 13 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429
  1. #
  2. # Multifunction miscellaneous devices
  3. #
  4. menu "Multifunction device drivers"
  5. depends on HAS_IOMEM
  6. config MFD_CORE
  7. tristate
  8. default n
  9. config MFD_88PM860X
  10. bool "Support Marvell 88PM8606/88PM8607"
  11. depends on I2C=y && GENERIC_HARDIRQS
  12. select MFD_CORE
  13. help
  14. This supports for Marvell 88PM8606/88PM8607 Power Management IC.
  15. This includes the I2C driver and the core APIs _only_, you have to
  16. select individual components like voltage regulators, RTC and
  17. battery-charger under the corresponding menus.
  18. config MFD_SM501
  19. tristate "Support for Silicon Motion SM501"
  20. ---help---
  21. This is the core driver for the Silicon Motion SM501 multimedia
  22. companion chip. This device is a multifunction device which may
  23. provide numerous interfaces including USB host controller, USB gadget,
  24. asynchronous serial ports, audio functions, and a dual display video
  25. interface. The device may be connected by PCI or local bus with
  26. varying functions enabled.
  27. config MFD_SM501_GPIO
  28. bool "Export GPIO via GPIO layer"
  29. depends on MFD_SM501 && GPIOLIB
  30. ---help---
  31. This option uses the gpio library layer to export the 64 GPIO
  32. lines on the SM501. The platform data is used to supply the
  33. base number for the first GPIO line to register.
  34. config MFD_ASIC3
  35. bool "Support for Compaq ASIC3"
  36. depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  37. select MFD_CORE
  38. ---help---
  39. This driver supports the ASIC3 multifunction chip found on many
  40. PDAs (mainly iPAQ and HTC based ones)
  41. config MFD_SH_MOBILE_SDHI
  42. bool "Support for SuperH Mobile SDHI"
  43. depends on SUPERH || ARCH_SHMOBILE
  44. select MFD_CORE
  45. ---help---
  46. This driver supports the SDHI hardware block found in many
  47. SuperH Mobile SoCs.
  48. config MFD_DAVINCI_VOICECODEC
  49. tristate
  50. select MFD_CORE
  51. config MFD_DM355EVM_MSP
  52. bool "DaVinci DM355 EVM microcontroller"
  53. depends on I2C && MACH_DAVINCI_DM355_EVM
  54. help
  55. This driver supports the MSP430 microcontroller used on these
  56. boards. MSP430 firmware manages resets and power sequencing,
  57. inputs from buttons and the IR remote, LEDs, an RTC, and more.
  58. config HTC_EGPIO
  59. bool "HTC EGPIO support"
  60. depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  61. help
  62. This driver supports the CPLD egpio chip present on
  63. several HTC phones. It provides basic support for input
  64. pins, output pins, and irqs.
  65. config HTC_PASIC3
  66. tristate "HTC PASIC3 LED/DS1WM chip support"
  67. select MFD_CORE
  68. help
  69. This core driver provides register access for the LED/DS1WM
  70. chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  71. HTC Magician devices, respectively. Actual functionality is
  72. handled by the leds-pasic3 and ds1wm drivers.
  73. config HTC_I2CPLD
  74. bool "HTC I2C PLD chip support"
  75. depends on I2C=y && GPIOLIB
  76. help
  77. If you say yes here you get support for the supposed CPLD
  78. found on omap850 HTC devices like the HTC Wizard and HTC Herald.
  79. This device provides input and output GPIOs through an I2C
  80. interface to one or more sub-chips.
  81. config UCB1400_CORE
  82. tristate "Philips UCB1400 Core driver"
  83. depends on AC97_BUS
  84. depends on GPIOLIB
  85. help
  86. This enables support for the Philips UCB1400 core functions.
  87. The UCB1400 is an AC97 audio codec.
  88. To compile this driver as a module, choose M here: the
  89. module will be called ucb1400_core.
  90. config TPS65010
  91. tristate "TPS6501x Power Management chips"
  92. depends on I2C && GPIOLIB
  93. default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  94. help
  95. If you say yes here you get support for the TPS6501x series of
  96. Power Management chips. These include voltage regulators,
  97. lithium ion/polymer battery charging, and other features that
  98. are often used in portable devices like cell phones and cameras.
  99. This driver can also be built as a module. If so, the module
  100. will be called tps65010.
  101. config MENELAUS
  102. bool "Texas Instruments TWL92330/Menelaus PM chip"
  103. depends on I2C=y && ARCH_OMAP2
  104. help
  105. If you say yes here you get support for the Texas Instruments
  106. TWL92330/Menelaus Power Management chip. This include voltage
  107. regulators, Dual slot memory card transceivers, real-time clock
  108. and other features that are often used in portable devices like
  109. cell phones and PDAs.
  110. config TWL4030_CORE
  111. bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
  112. depends on I2C=y && GENERIC_HARDIRQS
  113. help
  114. Say yes here if you have TWL4030 / TWL6030 family chip on your board.
  115. This core driver provides register access and IRQ handling
  116. facilities, and registers devices for the various functions
  117. so that function-specific drivers can bind to them.
  118. These multi-function chips are found on many OMAP2 and OMAP3
  119. boards, providing power management, RTC, GPIO, keypad, a
  120. high speed USB OTG transceiver, an audio codec (on most
  121. versions) and many other features.
  122. config TWL4030_POWER
  123. bool "Support power resources on TWL4030 family chips"
  124. depends on TWL4030_CORE && ARM
  125. help
  126. Say yes here if you want to use the power resources on the
  127. TWL4030 family chips. Most of these resources are regulators,
  128. which have a separate driver; some are control signals, such
  129. as clock request handshaking.
  130. This driver uses board-specific data to initialize the resources
  131. and load scripts controling which resources are switched off/on
  132. or reset when a sleep, wakeup or warm reset event occurs.
  133. config TWL4030_CODEC
  134. bool
  135. depends on TWL4030_CORE
  136. select MFD_CORE
  137. default n
  138. config MFD_TMIO
  139. bool
  140. default n
  141. config MFD_T7L66XB
  142. bool "Support Toshiba T7L66XB"
  143. depends on ARM && HAVE_CLK
  144. select MFD_CORE
  145. select MFD_TMIO
  146. help
  147. Support for Toshiba Mobile IO Controller T7L66XB
  148. config MFD_TC6387XB
  149. bool "Support Toshiba TC6387XB"
  150. depends on ARM && HAVE_CLK
  151. select MFD_CORE
  152. select MFD_TMIO
  153. help
  154. Support for Toshiba Mobile IO Controller TC6387XB
  155. config MFD_TC6393XB
  156. bool "Support Toshiba TC6393XB"
  157. depends on GPIOLIB && ARM
  158. select MFD_CORE
  159. select MFD_TMIO
  160. help
  161. Support for Toshiba Mobile IO Controller TC6393XB
  162. config PMIC_DA903X
  163. bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
  164. depends on I2C=y
  165. help
  166. Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
  167. ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
  168. usually found on PXA processors-based platforms. This includes
  169. the I2C driver and the core APIs _only_, you have to select
  170. individual components like LCD backlight, voltage regulators,
  171. LEDs and battery-charger under the corresponding menus.
  172. config PMIC_ADP5520
  173. bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
  174. depends on I2C=y
  175. help
  176. Say yes here to add support for Analog Devices AD5520 and ADP5501,
  177. Multifunction Power Management IC. This includes
  178. the I2C driver and the core APIs _only_, you have to select
  179. individual components like LCD backlight, LEDs, GPIOs and Kepad
  180. under the corresponding menus.
  181. config MFD_MAX8925
  182. bool "Maxim Semiconductor MAX8925 PMIC Support"
  183. depends on I2C=y && GENERIC_HARDIRQS
  184. select MFD_CORE
  185. help
  186. Say yes here to support for Maxim Semiconductor MAX8925. This is
  187. a Power Management IC. This driver provies common support for
  188. accessing the device, additional drivers must be enabled in order
  189. to use the functionality of the device.
  190. config MFD_WM8400
  191. tristate "Support Wolfson Microelectronics WM8400"
  192. select MFD_CORE
  193. depends on I2C
  194. help
  195. Support for the Wolfson Microelecronics WM8400 PMIC and audio
  196. CODEC. This driver provides common support for accessing
  197. the device, additional drivers must be enabled in order to use
  198. the functionality of the device.
  199. config MFD_WM831X
  200. bool "Support Wolfson Microelectronics WM831x/2x PMICs"
  201. select MFD_CORE
  202. depends on I2C=y && GENERIC_HARDIRQS
  203. help
  204. Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
  205. This driver provides common support for accessing the device,
  206. additional drivers must be enabled in order to use the
  207. functionality of the device.
  208. config MFD_WM8350
  209. bool
  210. depends on GENERIC_HARDIRQS
  211. config MFD_WM8350_CONFIG_MODE_0
  212. bool
  213. depends on MFD_WM8350
  214. config MFD_WM8350_CONFIG_MODE_1
  215. bool
  216. depends on MFD_WM8350
  217. config MFD_WM8350_CONFIG_MODE_2
  218. bool
  219. depends on MFD_WM8350
  220. config MFD_WM8350_CONFIG_MODE_3
  221. bool
  222. depends on MFD_WM8350
  223. config MFD_WM8351_CONFIG_MODE_0
  224. bool
  225. depends on MFD_WM8350
  226. config MFD_WM8351_CONFIG_MODE_1
  227. bool
  228. depends on MFD_WM8350
  229. config MFD_WM8351_CONFIG_MODE_2
  230. bool
  231. depends on MFD_WM8350
  232. config MFD_WM8351_CONFIG_MODE_3
  233. bool
  234. depends on MFD_WM8350
  235. config MFD_WM8352_CONFIG_MODE_0
  236. bool
  237. depends on MFD_WM8350
  238. config MFD_WM8352_CONFIG_MODE_1
  239. bool
  240. depends on MFD_WM8350
  241. config MFD_WM8352_CONFIG_MODE_2
  242. bool
  243. depends on MFD_WM8350
  244. config MFD_WM8352_CONFIG_MODE_3
  245. bool
  246. depends on MFD_WM8350
  247. config MFD_WM8350_I2C
  248. bool "Support Wolfson Microelectronics WM8350 with I2C"
  249. select MFD_WM8350
  250. depends on I2C=y && GENERIC_HARDIRQS
  251. help
  252. The WM8350 is an integrated audio and power management
  253. subsystem with watchdog and RTC functionality for embedded
  254. systems. This option enables core support for the WM8350 with
  255. I2C as the control interface. Additional options must be
  256. selected to enable support for the functionality of the chip.
  257. config MFD_WM8994
  258. bool "Support Wolfson Microelectronics WM8994"
  259. select MFD_CORE
  260. depends on I2C=y && GENERIC_HARDIRQS
  261. help
  262. The WM8994 is a highly integrated hi-fi CODEC designed for
  263. smartphone applicatiosn. As well as audio functionality it
  264. has on board GPIO and regulator functionality which is
  265. supported via the relevant subsystems. This driver provides
  266. core support for the WM8994, in order to use the actual
  267. functionaltiy of the device other drivers must be enabled.
  268. config MFD_PCF50633
  269. tristate "Support for NXP PCF50633"
  270. depends on I2C
  271. help
  272. Say yes here if you have NXP PCF50633 chip on your board.
  273. This core driver provides register access and IRQ handling
  274. facilities, and registers devices for the various functions
  275. so that function-specific drivers can bind to them.
  276. config MFD_MC13783
  277. tristate "Support Freescale MC13783"
  278. depends on SPI_MASTER
  279. select MFD_CORE
  280. help
  281. Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
  282. This driver provides common support for accessing the device,
  283. additional drivers must be enabled in order to use the
  284. functionality of the device.
  285. config PCF50633_ADC
  286. tristate "Support for NXP PCF50633 ADC"
  287. depends on MFD_PCF50633
  288. help
  289. Say yes here if you want to include support for ADC in the
  290. NXP PCF50633 chip.
  291. config PCF50633_GPIO
  292. tristate "Support for NXP PCF50633 GPIO"
  293. depends on MFD_PCF50633
  294. help
  295. Say yes here if you want to include support GPIO for pins on
  296. the PCF50633 chip.
  297. config AB3100_CORE
  298. bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
  299. depends on I2C=y
  300. default y if ARCH_U300
  301. help
  302. Select this to enable the AB3100 Mixed Signal IC core
  303. functionality. This connects to a AB3100 on the I2C bus
  304. and expose a number of symbols needed for dependent devices
  305. to read and write registers and subscribe to events from
  306. this multi-functional IC. This is needed to use other features
  307. of the AB3100 such as battery-backed RTC, charging control,
  308. LEDs, vibrator, system power and temperature, power management
  309. and ALSA sound.
  310. config AB3100_OTP
  311. tristate "ST-Ericsson AB3100 OTP functions"
  312. depends on AB3100_CORE
  313. default y if AB3100_CORE
  314. help
  315. Select this to enable the AB3100 Mixed Signal IC OTP (one-time
  316. programmable memory) support. This exposes a sysfs file to read
  317. out OTP values.
  318. config EZX_PCAP
  319. bool "PCAP Support"
  320. depends on GENERIC_HARDIRQS && SPI_MASTER
  321. help
  322. This enables the PCAP ASIC present on EZX Phones. This is
  323. needed for MMC, TouchScreen, Sound, USB, etc..
  324. config AB4500_CORE
  325. tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
  326. depends on SPI
  327. help
  328. Select this option to enable access to AB4500 power management
  329. chip. This connects to U8500 on the SSP/SPI bus and exports
  330. read/write functions for the devices to get access to this chip.
  331. This chip embeds various other multimedia funtionalities as well.
  332. config MFD_TIMBERDALE
  333. tristate "Support for the Timberdale FPGA"
  334. select MFD_CORE
  335. depends on PCI && GPIOLIB
  336. ---help---
  337. This is the core driver for the timberdale FPGA. This device is a
  338. multifunction device which exposes numerous platform devices.
  339. The timberdale FPGA can be found on the Intel Atom development board
  340. for in-vehicle infontainment, called Russellville.
  341. config LPC_SCH
  342. tristate "Intel SCH LPC"
  343. depends on PCI
  344. select MFD_CORE
  345. help
  346. LPC bridge function of the Intel SCH provides support for
  347. System Management Bus and General Purpose I/O.
  348. endmenu
  349. menu "Multimedia Capabilities Port drivers"
  350. depends on ARCH_SA1100
  351. config MCP
  352. tristate
  353. # Interface drivers
  354. config MCP_SA11X0
  355. tristate "Support SA11x0 MCP interface"
  356. depends on ARCH_SA1100
  357. select MCP
  358. # Chip drivers
  359. config MCP_UCB1200
  360. tristate "Support for UCB1200 / UCB1300"
  361. depends on MCP
  362. config MCP_UCB1200_TS
  363. tristate "Touchscreen interface support"
  364. depends on MCP_UCB1200 && INPUT
  365. endmenu