rd88f5181l-ge-setup.c 4.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189
  1. /*
  2. * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
  3. *
  4. * Marvell Orion-VoIP GE Reference Design Setup
  5. *
  6. * This file is licensed under the terms of the GNU General Public
  7. * License version 2. This program is licensed "as is" without any
  8. * warranty of any kind, whether express or implied.
  9. */
  10. #include <linux/gpio.h>
  11. #include <linux/kernel.h>
  12. #include <linux/init.h>
  13. #include <linux/platform_device.h>
  14. #include <linux/pci.h>
  15. #include <linux/irq.h>
  16. #include <linux/mtd/physmap.h>
  17. #include <linux/mv643xx_eth.h>
  18. #include <linux/ethtool.h>
  19. #include <linux/i2c.h>
  20. #include <net/dsa.h>
  21. #include <asm/mach-types.h>
  22. #include <asm/mach/arch.h>
  23. #include <asm/mach/pci.h>
  24. #include <mach/orion5x.h>
  25. #include "common.h"
  26. #include "mpp.h"
  27. /*****************************************************************************
  28. * RD-88F5181L GE Info
  29. ****************************************************************************/
  30. /*
  31. * 16M NOR flash Device bus boot chip select
  32. */
  33. #define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000
  34. #define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M
  35. /*****************************************************************************
  36. * 16M NOR Flash on Device bus Boot chip select
  37. ****************************************************************************/
  38. static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
  39. .width = 1,
  40. };
  41. static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
  42. .flags = IORESOURCE_MEM,
  43. .start = RD88F5181L_GE_NOR_BOOT_BASE,
  44. .end = RD88F5181L_GE_NOR_BOOT_BASE +
  45. RD88F5181L_GE_NOR_BOOT_SIZE - 1,
  46. };
  47. static struct platform_device rd88f5181l_ge_nor_boot_flash = {
  48. .name = "physmap-flash",
  49. .id = 0,
  50. .dev = {
  51. .platform_data = &rd88f5181l_ge_nor_boot_flash_data,
  52. },
  53. .num_resources = 1,
  54. .resource = &rd88f5181l_ge_nor_boot_flash_resource,
  55. };
  56. /*****************************************************************************
  57. * General Setup
  58. ****************************************************************************/
  59. static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
  60. MPP0_GPIO, /* LED1 */
  61. MPP1_GPIO, /* LED5 */
  62. MPP2_GPIO, /* LED4 */
  63. MPP3_GPIO, /* LED3 */
  64. MPP4_GPIO, /* PCI_intA */
  65. MPP5_GPIO, /* RTC interrupt */
  66. MPP6_PCI_CLK, /* CPU PCI refclk */
  67. MPP7_PCI_CLK, /* PCI/PCIe refclk */
  68. MPP8_GPIO, /* 88e6131 interrupt */
  69. MPP9_GPIO, /* GE_RXERR */
  70. MPP10_GPIO, /* PCI_intB */
  71. MPP11_GPIO, /* LED2 */
  72. MPP12_GIGE, /* GE_TXD[4] */
  73. MPP13_GIGE, /* GE_TXD[5] */
  74. MPP14_GIGE, /* GE_TXD[6] */
  75. MPP15_GIGE, /* GE_TXD[7] */
  76. MPP16_GIGE, /* GE_RXD[4] */
  77. MPP17_GIGE, /* GE_RXD[5] */
  78. MPP18_GIGE, /* GE_RXD[6] */
  79. MPP19_GIGE, /* GE_RXD[7] */
  80. 0,
  81. };
  82. static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
  83. .phy_addr = MV643XX_ETH_PHY_NONE,
  84. .speed = SPEED_1000,
  85. .duplex = DUPLEX_FULL,
  86. };
  87. static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
  88. .port_names[0] = "lan2",
  89. .port_names[1] = "lan1",
  90. .port_names[2] = "wan",
  91. .port_names[3] = "cpu",
  92. .port_names[5] = "lan4",
  93. .port_names[7] = "lan3",
  94. };
  95. static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
  96. .nr_chips = 1,
  97. .chip = &rd88f5181l_ge_switch_chip_data,
  98. };
  99. static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
  100. I2C_BOARD_INFO("ds1338", 0x68),
  101. };
  102. static void __init rd88f5181l_ge_init(void)
  103. {
  104. /*
  105. * Setup basic Orion functions. Need to be called early.
  106. */
  107. orion5x_init();
  108. orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
  109. /*
  110. * Configure peripherals.
  111. */
  112. orion5x_ehci0_init();
  113. orion5x_eth_init(&rd88f5181l_ge_eth_data);
  114. orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
  115. gpio_to_irq(8));
  116. orion5x_i2c_init();
  117. orion5x_uart0_init();
  118. orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
  119. RD88F5181L_GE_NOR_BOOT_SIZE);
  120. platform_device_register(&rd88f5181l_ge_nor_boot_flash);
  121. i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
  122. }
  123. static int __init
  124. rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  125. {
  126. int irq;
  127. /*
  128. * Check for devices with hard-wired IRQs.
  129. */
  130. irq = orion5x_pci_map_irq(dev, slot, pin);
  131. if (irq != -1)
  132. return irq;
  133. /*
  134. * Cardbus slot.
  135. */
  136. if (pin == 1)
  137. return gpio_to_irq(4);
  138. else
  139. return gpio_to_irq(10);
  140. }
  141. static struct hw_pci rd88f5181l_ge_pci __initdata = {
  142. .nr_controllers = 2,
  143. .setup = orion5x_pci_sys_setup,
  144. .scan = orion5x_pci_sys_scan_bus,
  145. .map_irq = rd88f5181l_ge_pci_map_irq,
  146. };
  147. static int __init rd88f5181l_ge_pci_init(void)
  148. {
  149. if (machine_is_rd88f5181l_ge()) {
  150. orion5x_pci_set_cardbus_mode();
  151. pci_common_init(&rd88f5181l_ge_pci);
  152. }
  153. return 0;
  154. }
  155. subsys_initcall(rd88f5181l_ge_pci_init);
  156. MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
  157. /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
  158. .atag_offset = 0x100,
  159. .init_machine = rd88f5181l_ge_init,
  160. .map_io = orion5x_map_io,
  161. .init_early = orion5x_init_early,
  162. .init_irq = orion5x_init_irq,
  163. .init_time = orion5x_timer_init,
  164. .fixup = tag_fixup_mem32,
  165. .restart = orion5x_restart,
  166. MACHINE_END