| 1234567891011121314151617181920 |
- SMSC USB3503 High-Speed Hub Controller
- Required properties:
- - compatible: Should be "smsc,usb3503".
- - reg: Specifies the i2c slave address, it should be 0x08.
- - connect-gpios: Should specify GPIO for connect.
- - intn-gpios: Should specify GPIO for interrupt.
- - reset-gpios: Should specify GPIO for reset.
- - initial-mode: Should specify initial mode.
- (1 for HUB mode, 2 for STANDBY mode)
- Examples:
- usb3503@08 {
- compatible = "smsc,usb3503";
- reg = <0x08>;
- connect-gpios = <&gpx3 0 1>;
- intn-gpios = <&gpx3 4 1>;
- reset-gpios = <&gpx3 5 1>;
- initial-mode = <1>;
- };
|
