pcm037.c 4.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172
  1. /*
  2. * Copyright (C) 2008 Sascha Hauer, Pengutronix
  3. *
  4. * This program is free software; you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License as published by
  6. * the Free Software Foundation; either version 2 of the License, or
  7. * (at your option) any later version.
  8. *
  9. * This program is distributed in the hope that it will be useful,
  10. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. * GNU General Public License for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License
  15. * along with this program; if not, write to the Free Software
  16. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  17. */
  18. #include <linux/types.h>
  19. #include <linux/init.h>
  20. #include <linux/platform_device.h>
  21. #include <linux/mtd/physmap.h>
  22. #include <linux/memory.h>
  23. #include <linux/gpio.h>
  24. #include <linux/smc911x.h>
  25. #include <linux/interrupt.h>
  26. #include <mach/hardware.h>
  27. #include <asm/mach-types.h>
  28. #include <asm/mach/arch.h>
  29. #include <asm/mach/time.h>
  30. #include <asm/mach/map.h>
  31. #include <mach/common.h>
  32. #include <mach/imx-uart.h>
  33. #include <mach/iomux-mx3.h>
  34. #include <mach/board-pcm037.h>
  35. #include "devices.h"
  36. static struct physmap_flash_data pcm037_flash_data = {
  37. .width = 2,
  38. };
  39. static struct resource pcm037_flash_resource = {
  40. .start = 0xa0000000,
  41. .end = 0xa1ffffff,
  42. .flags = IORESOURCE_MEM,
  43. };
  44. static struct platform_device pcm037_flash = {
  45. .name = "physmap-flash",
  46. .id = 0,
  47. .dev = {
  48. .platform_data = &pcm037_flash_data,
  49. },
  50. .resource = &pcm037_flash_resource,
  51. .num_resources = 1,
  52. };
  53. static struct imxuart_platform_data uart_pdata = {
  54. .flags = IMXUART_HAVE_RTSCTS,
  55. };
  56. static struct resource smc911x_resources[] = {
  57. [0] = {
  58. .start = CS1_BASE_ADDR + 0x300,
  59. .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
  60. .flags = IORESOURCE_MEM,
  61. },
  62. [1] = {
  63. .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
  64. .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
  65. .flags = IORESOURCE_IRQ,
  66. },
  67. };
  68. static struct smc911x_platdata smc911x_info = {
  69. .flags = SMC911X_USE_32BIT,
  70. .irq_flags = IRQF_SHARED | IRQF_TRIGGER_LOW,
  71. };
  72. static struct platform_device pcm037_eth = {
  73. .name = "smc911x",
  74. .id = -1,
  75. .num_resources = ARRAY_SIZE(smc911x_resources),
  76. .resource = smc911x_resources,
  77. .dev = {
  78. .platform_data = &smc911x_info,
  79. },
  80. };
  81. static struct platform_device *devices[] __initdata = {
  82. &pcm037_flash,
  83. &pcm037_eth,
  84. };
  85. /*
  86. * Board specific initialization.
  87. */
  88. static void __init mxc_board_init(void)
  89. {
  90. platform_add_devices(devices, ARRAY_SIZE(devices));
  91. mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
  92. mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
  93. mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
  94. mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
  95. mxc_register_device(&mxc_uart_device0, &uart_pdata);
  96. mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
  97. mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
  98. mxc_register_device(&mxc_uart_device2, &uart_pdata);
  99. mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
  100. mxc_register_device(&mxc_w1_master_device, NULL);
  101. /* SMSC9215 IRQ pin */
  102. mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
  103. if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
  104. gpio_direction_input(MX31_PIN_GPIO3_1);
  105. }
  106. /*
  107. * This structure defines static mappings for the pcm037 board.
  108. */
  109. static struct map_desc pcm037_io_desc[] __initdata = {
  110. {
  111. .virtual = AIPS1_BASE_ADDR_VIRT,
  112. .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
  113. .length = AIPS1_SIZE,
  114. .type = MT_DEVICE_NONSHARED
  115. }, {
  116. .virtual = AIPS2_BASE_ADDR_VIRT,
  117. .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
  118. .length = AIPS2_SIZE,
  119. .type = MT_DEVICE_NONSHARED
  120. },
  121. };
  122. /*
  123. * Set up static virtual mappings.
  124. */
  125. void __init pcm037_map_io(void)
  126. {
  127. mxc_map_io();
  128. iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
  129. }
  130. static void __init pcm037_timer_init(void)
  131. {
  132. mxc_clocks_init(26000000);
  133. mxc_timer_init("ipg_clk.0");
  134. }
  135. struct sys_timer pcm037_timer = {
  136. .init = pcm037_timer_init,
  137. };
  138. MACHINE_START(PCM037, "Phytec Phycore pcm037")
  139. /* Maintainer: Pengutronix */
  140. .phys_io = AIPS1_BASE_ADDR,
  141. .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
  142. .boot_params = PHYS_OFFSET + 0x100,
  143. .map_io = pcm037_map_io,
  144. .init_irq = mxc_init_irq,
  145. .init_machine = mxc_board_init,
  146. .timer = &pcm037_timer,
  147. MACHINE_END