pci.c 8.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326
  1. /*
  2. * Copyright (c) 2008-2009 Atheros Communications Inc.
  3. *
  4. * Permission to use, copy, modify, and/or distribute this software for any
  5. * purpose with or without fee is hereby granted, provided that the above
  6. * copyright notice and this permission notice appear in all copies.
  7. *
  8. * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  9. * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10. * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11. * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12. * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13. * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14. * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15. */
  16. #include <linux/nl80211.h>
  17. #include <linux/pci.h>
  18. #include <linux/pci-aspm.h>
  19. #include "../ath.h"
  20. #include "ath5k.h"
  21. #include "debug.h"
  22. #include "base.h"
  23. #include "reg.h"
  24. /* Known PCI ids */
  25. static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
  26. { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
  27. { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
  28. { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
  29. { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
  30. { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
  31. { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
  32. { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
  33. { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
  34. { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
  35. { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
  36. { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
  37. { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
  38. { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
  39. { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
  40. { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
  41. { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
  42. { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
  43. { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
  44. { 0 }
  45. };
  46. /* return bus cachesize in 4B word units */
  47. static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
  48. {
  49. struct ath5k_softc *sc = (struct ath5k_softc *) common->priv;
  50. u8 u8tmp;
  51. pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
  52. *csz = (int)u8tmp;
  53. /*
  54. * This check was put in to avoid "unplesant" consequences if
  55. * the bootrom has not fully initialized all PCI devices.
  56. * Sometimes the cache line size register is not set
  57. */
  58. if (*csz == 0)
  59. *csz = L1_CACHE_BYTES >> 2; /* Use the default size */
  60. }
  61. /*
  62. * Read from eeprom
  63. */
  64. bool ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
  65. {
  66. struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
  67. u32 status, timeout;
  68. /*
  69. * Initialize EEPROM access
  70. */
  71. if (ah->ah_version == AR5K_AR5210) {
  72. AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
  73. (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
  74. } else {
  75. ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
  76. AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
  77. AR5K_EEPROM_CMD_READ);
  78. }
  79. for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
  80. status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
  81. if (status & AR5K_EEPROM_STAT_RDDONE) {
  82. if (status & AR5K_EEPROM_STAT_RDERR)
  83. return -EIO;
  84. *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
  85. 0xffff);
  86. return 0;
  87. }
  88. udelay(15);
  89. }
  90. return -ETIMEDOUT;
  91. }
  92. int ath5k_hw_read_srev(struct ath5k_hw *ah)
  93. {
  94. ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
  95. return 0;
  96. }
  97. /* Common ath_bus_opts structure */
  98. static const struct ath_bus_ops ath_pci_bus_ops = {
  99. .ath_bus_type = ATH_PCI,
  100. .read_cachesize = ath5k_pci_read_cachesize,
  101. .eeprom_read = ath5k_pci_eeprom_read,
  102. };
  103. /********************\
  104. * PCI Initialization *
  105. \********************/
  106. static int __devinit
  107. ath5k_pci_probe(struct pci_dev *pdev,
  108. const struct pci_device_id *id)
  109. {
  110. void __iomem *mem;
  111. struct ath5k_softc *sc;
  112. struct ieee80211_hw *hw;
  113. int ret;
  114. u8 csz;
  115. /*
  116. * L0s needs to be disabled on all ath5k cards.
  117. *
  118. * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
  119. * by default in the future in 2.6.36) this will also mean both L1 and
  120. * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
  121. * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
  122. * though but cannot currently undue the effect of a blacklist, for
  123. * details you can read pcie_aspm_sanity_check() and see how it adjusts
  124. * the device link capability.
  125. *
  126. * It may be possible in the future to implement some PCI API to allow
  127. * drivers to override blacklists for pre 1.1 PCIe but for now it is
  128. * best to accept that both L0s and L1 will be disabled completely for
  129. * distributions shipping with CONFIG_PCIEASPM rather than having this
  130. * issue present. Motivation for adding this new API will be to help
  131. * with power consumption for some of these devices.
  132. */
  133. pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
  134. ret = pci_enable_device(pdev);
  135. if (ret) {
  136. dev_err(&pdev->dev, "can't enable device\n");
  137. goto err;
  138. }
  139. /* XXX 32-bit addressing only */
  140. ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
  141. if (ret) {
  142. dev_err(&pdev->dev, "32-bit DMA not available\n");
  143. goto err_dis;
  144. }
  145. /*
  146. * Cache line size is used to size and align various
  147. * structures used to communicate with the hardware.
  148. */
  149. pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
  150. if (csz == 0) {
  151. /*
  152. * Linux 2.4.18 (at least) writes the cache line size
  153. * register as a 16-bit wide register which is wrong.
  154. * We must have this setup properly for rx buffer
  155. * DMA to work so force a reasonable value here if it
  156. * comes up zero.
  157. */
  158. csz = L1_CACHE_BYTES >> 2;
  159. pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
  160. }
  161. /*
  162. * The default setting of latency timer yields poor results,
  163. * set it to the value used by other systems. It may be worth
  164. * tweaking this setting more.
  165. */
  166. pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
  167. /* Enable bus mastering */
  168. pci_set_master(pdev);
  169. /*
  170. * Disable the RETRY_TIMEOUT register (0x41) to keep
  171. * PCI Tx retries from interfering with C3 CPU state.
  172. */
  173. pci_write_config_byte(pdev, 0x41, 0);
  174. ret = pci_request_region(pdev, 0, "ath5k");
  175. if (ret) {
  176. dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
  177. goto err_dis;
  178. }
  179. mem = pci_iomap(pdev, 0, 0);
  180. if (!mem) {
  181. dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
  182. ret = -EIO;
  183. goto err_reg;
  184. }
  185. /*
  186. * Allocate hw (mac80211 main struct)
  187. * and hw->priv (driver private data)
  188. */
  189. hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
  190. if (hw == NULL) {
  191. dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
  192. ret = -ENOMEM;
  193. goto err_map;
  194. }
  195. dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
  196. sc = hw->priv;
  197. sc->hw = hw;
  198. sc->pdev = pdev;
  199. sc->dev = &pdev->dev;
  200. sc->irq = pdev->irq;
  201. sc->devid = id->device;
  202. sc->iobase = mem; /* So we can unmap it on detach */
  203. /* Initialize */
  204. ret = ath5k_init_softc(sc, &ath_pci_bus_ops);
  205. if (ret)
  206. goto err_free;
  207. /* Set private data */
  208. pci_set_drvdata(pdev, hw);
  209. return 0;
  210. err_free:
  211. ieee80211_free_hw(hw);
  212. err_map:
  213. pci_iounmap(pdev, mem);
  214. err_reg:
  215. pci_release_region(pdev, 0);
  216. err_dis:
  217. pci_disable_device(pdev);
  218. err:
  219. return ret;
  220. }
  221. static void __devexit
  222. ath5k_pci_remove(struct pci_dev *pdev)
  223. {
  224. struct ieee80211_hw *hw = pci_get_drvdata(pdev);
  225. struct ath5k_softc *sc = hw->priv;
  226. ath5k_deinit_softc(sc);
  227. pci_iounmap(pdev, sc->iobase);
  228. pci_release_region(pdev, 0);
  229. pci_disable_device(pdev);
  230. ieee80211_free_hw(hw);
  231. }
  232. #ifdef CONFIG_PM_SLEEP
  233. static int ath5k_pci_suspend(struct device *dev)
  234. {
  235. struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
  236. ath5k_led_off(sc);
  237. return 0;
  238. }
  239. static int ath5k_pci_resume(struct device *dev)
  240. {
  241. struct pci_dev *pdev = to_pci_dev(dev);
  242. struct ath5k_softc *sc = pci_get_drvdata(pdev);
  243. /*
  244. * Suspend/Resume resets the PCI configuration space, so we have to
  245. * re-disable the RETRY_TIMEOUT register (0x41) to keep
  246. * PCI Tx retries from interfering with C3 CPU state
  247. */
  248. pci_write_config_byte(pdev, 0x41, 0);
  249. ath5k_led_enable(sc);
  250. return 0;
  251. }
  252. static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
  253. #define ATH5K_PM_OPS (&ath5k_pm_ops)
  254. #else
  255. #define ATH5K_PM_OPS NULL
  256. #endif /* CONFIG_PM_SLEEP */
  257. static struct pci_driver ath5k_pci_driver = {
  258. .name = KBUILD_MODNAME,
  259. .id_table = ath5k_pci_id_table,
  260. .probe = ath5k_pci_probe,
  261. .remove = __devexit_p(ath5k_pci_remove),
  262. .driver.pm = ATH5K_PM_OPS,
  263. };
  264. /*
  265. * Module init/exit functions
  266. */
  267. static int __init
  268. init_ath5k_pci(void)
  269. {
  270. int ret;
  271. ret = pci_register_driver(&ath5k_pci_driver);
  272. if (ret) {
  273. printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
  274. return ret;
  275. }
  276. return 0;
  277. }
  278. static void __exit
  279. exit_ath5k_pci(void)
  280. {
  281. pci_unregister_driver(&ath5k_pci_driver);
  282. }
  283. module_init(init_ath5k_pci);
  284. module_exit(exit_ath5k_pci);