core.c 26 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068
  1. /*
  2. * This is the linux wireless configuration interface.
  3. *
  4. * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
  5. */
  6. #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  7. #include <linux/if.h>
  8. #include <linux/module.h>
  9. #include <linux/err.h>
  10. #include <linux/list.h>
  11. #include <linux/slab.h>
  12. #include <linux/nl80211.h>
  13. #include <linux/debugfs.h>
  14. #include <linux/notifier.h>
  15. #include <linux/device.h>
  16. #include <linux/etherdevice.h>
  17. #include <linux/rtnetlink.h>
  18. #include <linux/sched.h>
  19. #include <net/genetlink.h>
  20. #include <net/cfg80211.h>
  21. #include "nl80211.h"
  22. #include "core.h"
  23. #include "sysfs.h"
  24. #include "debugfs.h"
  25. #include "wext-compat.h"
  26. #include "ethtool.h"
  27. /* name for sysfs, %d is appended */
  28. #define PHY_NAME "phy"
  29. MODULE_AUTHOR("Johannes Berg");
  30. MODULE_LICENSE("GPL");
  31. MODULE_DESCRIPTION("wireless configuration support");
  32. /* RCU-protected (and cfg80211_mutex for writers) */
  33. LIST_HEAD(cfg80211_rdev_list);
  34. int cfg80211_rdev_list_generation;
  35. DEFINE_MUTEX(cfg80211_mutex);
  36. /* for debugfs */
  37. static struct dentry *ieee80211_debugfs_dir;
  38. /* for the cleanup, scan and event works */
  39. struct workqueue_struct *cfg80211_wq;
  40. static bool cfg80211_disable_40mhz_24ghz;
  41. module_param(cfg80211_disable_40mhz_24ghz, bool, 0644);
  42. MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz,
  43. "Disable 40MHz support in the 2.4GHz band");
  44. /* requires cfg80211_mutex to be held! */
  45. struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
  46. {
  47. struct cfg80211_registered_device *result = NULL, *rdev;
  48. if (!wiphy_idx_valid(wiphy_idx))
  49. return NULL;
  50. assert_cfg80211_lock();
  51. list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
  52. if (rdev->wiphy_idx == wiphy_idx) {
  53. result = rdev;
  54. break;
  55. }
  56. }
  57. return result;
  58. }
  59. int get_wiphy_idx(struct wiphy *wiphy)
  60. {
  61. struct cfg80211_registered_device *rdev;
  62. if (!wiphy)
  63. return WIPHY_IDX_STALE;
  64. rdev = wiphy_to_dev(wiphy);
  65. return rdev->wiphy_idx;
  66. }
  67. /* requires cfg80211_rdev_mutex to be held! */
  68. struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
  69. {
  70. struct cfg80211_registered_device *rdev;
  71. if (!wiphy_idx_valid(wiphy_idx))
  72. return NULL;
  73. assert_cfg80211_lock();
  74. rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
  75. if (!rdev)
  76. return NULL;
  77. return &rdev->wiphy;
  78. }
  79. /* requires cfg80211_mutex to be held! */
  80. struct cfg80211_registered_device *
  81. __cfg80211_rdev_from_info(struct genl_info *info)
  82. {
  83. int ifindex;
  84. struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
  85. struct net_device *dev;
  86. int err = -EINVAL;
  87. assert_cfg80211_lock();
  88. if (info->attrs[NL80211_ATTR_WIPHY]) {
  89. bywiphyidx = cfg80211_rdev_by_wiphy_idx(
  90. nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
  91. err = -ENODEV;
  92. }
  93. if (info->attrs[NL80211_ATTR_IFINDEX]) {
  94. ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
  95. dev = dev_get_by_index(genl_info_net(info), ifindex);
  96. if (dev) {
  97. if (dev->ieee80211_ptr)
  98. byifidx =
  99. wiphy_to_dev(dev->ieee80211_ptr->wiphy);
  100. dev_put(dev);
  101. }
  102. err = -ENODEV;
  103. }
  104. if (bywiphyidx && byifidx) {
  105. if (bywiphyidx != byifidx)
  106. return ERR_PTR(-EINVAL);
  107. else
  108. return bywiphyidx; /* == byifidx */
  109. }
  110. if (bywiphyidx)
  111. return bywiphyidx;
  112. if (byifidx)
  113. return byifidx;
  114. return ERR_PTR(err);
  115. }
  116. struct cfg80211_registered_device *
  117. cfg80211_get_dev_from_info(struct genl_info *info)
  118. {
  119. struct cfg80211_registered_device *rdev;
  120. mutex_lock(&cfg80211_mutex);
  121. rdev = __cfg80211_rdev_from_info(info);
  122. /* if it is not an error we grab the lock on
  123. * it to assure it won't be going away while
  124. * we operate on it */
  125. if (!IS_ERR(rdev))
  126. mutex_lock(&rdev->mtx);
  127. mutex_unlock(&cfg80211_mutex);
  128. return rdev;
  129. }
  130. struct cfg80211_registered_device *
  131. cfg80211_get_dev_from_ifindex(struct net *net, int ifindex)
  132. {
  133. struct cfg80211_registered_device *rdev = ERR_PTR(-ENODEV);
  134. struct net_device *dev;
  135. mutex_lock(&cfg80211_mutex);
  136. dev = dev_get_by_index(net, ifindex);
  137. if (!dev)
  138. goto out;
  139. if (dev->ieee80211_ptr) {
  140. rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
  141. mutex_lock(&rdev->mtx);
  142. } else
  143. rdev = ERR_PTR(-ENODEV);
  144. dev_put(dev);
  145. out:
  146. mutex_unlock(&cfg80211_mutex);
  147. return rdev;
  148. }
  149. /* requires cfg80211_mutex to be held */
  150. int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
  151. char *newname)
  152. {
  153. struct cfg80211_registered_device *rdev2;
  154. int wiphy_idx, taken = -1, result, digits;
  155. assert_cfg80211_lock();
  156. /* prohibit calling the thing phy%d when %d is not its number */
  157. sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
  158. if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
  159. /* count number of places needed to print wiphy_idx */
  160. digits = 1;
  161. while (wiphy_idx /= 10)
  162. digits++;
  163. /*
  164. * deny the name if it is phy<idx> where <idx> is printed
  165. * without leading zeroes. taken == strlen(newname) here
  166. */
  167. if (taken == strlen(PHY_NAME) + digits)
  168. return -EINVAL;
  169. }
  170. /* Ignore nop renames */
  171. if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0)
  172. return 0;
  173. /* Ensure another device does not already have this name. */
  174. list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
  175. if (strcmp(newname, dev_name(&rdev2->wiphy.dev)) == 0)
  176. return -EINVAL;
  177. result = device_rename(&rdev->wiphy.dev, newname);
  178. if (result)
  179. return result;
  180. if (rdev->wiphy.debugfsdir &&
  181. !debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
  182. rdev->wiphy.debugfsdir,
  183. rdev->wiphy.debugfsdir->d_parent,
  184. newname))
  185. pr_err("failed to rename debugfs dir to %s!\n", newname);
  186. nl80211_notify_dev_rename(rdev);
  187. return 0;
  188. }
  189. int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
  190. struct net *net)
  191. {
  192. struct wireless_dev *wdev;
  193. int err = 0;
  194. if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK))
  195. return -EOPNOTSUPP;
  196. list_for_each_entry(wdev, &rdev->netdev_list, list) {
  197. wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
  198. err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
  199. if (err)
  200. break;
  201. wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
  202. }
  203. if (err) {
  204. /* failed -- clean up to old netns */
  205. net = wiphy_net(&rdev->wiphy);
  206. list_for_each_entry_continue_reverse(wdev, &rdev->netdev_list,
  207. list) {
  208. wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
  209. err = dev_change_net_namespace(wdev->netdev, net,
  210. "wlan%d");
  211. WARN_ON(err);
  212. wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
  213. }
  214. return err;
  215. }
  216. wiphy_net_set(&rdev->wiphy, net);
  217. err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev));
  218. WARN_ON(err);
  219. return 0;
  220. }
  221. static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
  222. {
  223. struct cfg80211_registered_device *rdev = data;
  224. rdev->ops->rfkill_poll(&rdev->wiphy);
  225. }
  226. static int cfg80211_rfkill_set_block(void *data, bool blocked)
  227. {
  228. struct cfg80211_registered_device *rdev = data;
  229. struct wireless_dev *wdev;
  230. if (!blocked)
  231. return 0;
  232. rtnl_lock();
  233. mutex_lock(&rdev->devlist_mtx);
  234. list_for_each_entry(wdev, &rdev->netdev_list, list)
  235. dev_close(wdev->netdev);
  236. mutex_unlock(&rdev->devlist_mtx);
  237. rtnl_unlock();
  238. return 0;
  239. }
  240. static void cfg80211_rfkill_sync_work(struct work_struct *work)
  241. {
  242. struct cfg80211_registered_device *rdev;
  243. rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync);
  244. cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill));
  245. }
  246. static void cfg80211_event_work(struct work_struct *work)
  247. {
  248. struct cfg80211_registered_device *rdev;
  249. rdev = container_of(work, struct cfg80211_registered_device,
  250. event_work);
  251. rtnl_lock();
  252. cfg80211_lock_rdev(rdev);
  253. cfg80211_process_rdev_events(rdev);
  254. cfg80211_unlock_rdev(rdev);
  255. rtnl_unlock();
  256. }
  257. /* exported functions */
  258. struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
  259. {
  260. static int wiphy_counter;
  261. struct cfg80211_registered_device *rdev;
  262. int alloc_size;
  263. WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
  264. WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
  265. WARN_ON(ops->connect && !ops->disconnect);
  266. WARN_ON(ops->join_ibss && !ops->leave_ibss);
  267. WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
  268. WARN_ON(ops->add_station && !ops->del_station);
  269. WARN_ON(ops->add_mpath && !ops->del_mpath);
  270. WARN_ON(ops->join_mesh && !ops->leave_mesh);
  271. alloc_size = sizeof(*rdev) + sizeof_priv;
  272. rdev = kzalloc(alloc_size, GFP_KERNEL);
  273. if (!rdev)
  274. return NULL;
  275. rdev->ops = ops;
  276. mutex_lock(&cfg80211_mutex);
  277. rdev->wiphy_idx = wiphy_counter++;
  278. if (unlikely(!wiphy_idx_valid(rdev->wiphy_idx))) {
  279. wiphy_counter--;
  280. mutex_unlock(&cfg80211_mutex);
  281. /* ugh, wrapped! */
  282. kfree(rdev);
  283. return NULL;
  284. }
  285. mutex_unlock(&cfg80211_mutex);
  286. /* give it a proper name */
  287. dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
  288. mutex_init(&rdev->mtx);
  289. mutex_init(&rdev->devlist_mtx);
  290. mutex_init(&rdev->sched_scan_mtx);
  291. INIT_LIST_HEAD(&rdev->netdev_list);
  292. spin_lock_init(&rdev->bss_lock);
  293. INIT_LIST_HEAD(&rdev->bss_list);
  294. INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
  295. INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
  296. #ifdef CONFIG_CFG80211_WEXT
  297. rdev->wiphy.wext = &cfg80211_wext_handler;
  298. #endif
  299. device_initialize(&rdev->wiphy.dev);
  300. rdev->wiphy.dev.class = &ieee80211_class;
  301. rdev->wiphy.dev.platform_data = rdev;
  302. #ifdef CONFIG_CFG80211_DEFAULT_PS
  303. rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
  304. #endif
  305. wiphy_net_set(&rdev->wiphy, &init_net);
  306. rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
  307. rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
  308. &rdev->wiphy.dev, RFKILL_TYPE_WLAN,
  309. &rdev->rfkill_ops, rdev);
  310. if (!rdev->rfkill) {
  311. kfree(rdev);
  312. return NULL;
  313. }
  314. INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work);
  315. INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
  316. INIT_WORK(&rdev->event_work, cfg80211_event_work);
  317. init_waitqueue_head(&rdev->dev_wait);
  318. /*
  319. * Initialize wiphy parameters to IEEE 802.11 MIB default values.
  320. * Fragmentation and RTS threshold are disabled by default with the
  321. * special -1 value.
  322. */
  323. rdev->wiphy.retry_short = 7;
  324. rdev->wiphy.retry_long = 4;
  325. rdev->wiphy.frag_threshold = (u32) -1;
  326. rdev->wiphy.rts_threshold = (u32) -1;
  327. rdev->wiphy.coverage_class = 0;
  328. return &rdev->wiphy;
  329. }
  330. EXPORT_SYMBOL(wiphy_new);
  331. static int wiphy_verify_combinations(struct wiphy *wiphy)
  332. {
  333. const struct ieee80211_iface_combination *c;
  334. int i, j;
  335. /* If we have combinations enforce them */
  336. if (wiphy->n_iface_combinations)
  337. wiphy->flags |= WIPHY_FLAG_ENFORCE_COMBINATIONS;
  338. for (i = 0; i < wiphy->n_iface_combinations; i++) {
  339. u32 cnt = 0;
  340. u16 all_iftypes = 0;
  341. c = &wiphy->iface_combinations[i];
  342. /* Combinations with just one interface aren't real */
  343. if (WARN_ON(c->max_interfaces < 2))
  344. return -EINVAL;
  345. /* Need at least one channel */
  346. if (WARN_ON(!c->num_different_channels))
  347. return -EINVAL;
  348. if (WARN_ON(!c->n_limits))
  349. return -EINVAL;
  350. for (j = 0; j < c->n_limits; j++) {
  351. u16 types = c->limits[j].types;
  352. /*
  353. * interface types shouldn't overlap, this is
  354. * used in cfg80211_can_change_interface()
  355. */
  356. if (WARN_ON(types & all_iftypes))
  357. return -EINVAL;
  358. all_iftypes |= types;
  359. if (WARN_ON(!c->limits[j].max))
  360. return -EINVAL;
  361. /* Shouldn't list software iftypes in combinations! */
  362. if (WARN_ON(wiphy->software_iftypes & types))
  363. return -EINVAL;
  364. cnt += c->limits[j].max;
  365. /*
  366. * Don't advertise an unsupported type
  367. * in a combination.
  368. */
  369. if (WARN_ON((wiphy->interface_modes & types) != types))
  370. return -EINVAL;
  371. }
  372. /* You can't even choose that many! */
  373. if (WARN_ON(cnt < c->max_interfaces))
  374. return -EINVAL;
  375. }
  376. return 0;
  377. }
  378. int wiphy_register(struct wiphy *wiphy)
  379. {
  380. struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
  381. int res;
  382. enum ieee80211_band band;
  383. struct ieee80211_supported_band *sband;
  384. bool have_band = false;
  385. int i;
  386. u16 ifmodes = wiphy->interface_modes;
  387. if (WARN_ON((wiphy->wowlan.flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
  388. !(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
  389. return -EINVAL;
  390. if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
  391. return -EINVAL;
  392. if (WARN_ON(wiphy->addresses &&
  393. !is_zero_ether_addr(wiphy->perm_addr) &&
  394. memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
  395. ETH_ALEN)))
  396. return -EINVAL;
  397. if (wiphy->addresses)
  398. memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
  399. /* sanity check ifmodes */
  400. WARN_ON(!ifmodes);
  401. ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1;
  402. if (WARN_ON(ifmodes != wiphy->interface_modes))
  403. wiphy->interface_modes = ifmodes;
  404. res = wiphy_verify_combinations(wiphy);
  405. if (res)
  406. return res;
  407. /* sanity check supported bands/channels */
  408. for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
  409. sband = wiphy->bands[band];
  410. if (!sband)
  411. continue;
  412. sband->band = band;
  413. if (WARN_ON(!sband->n_channels || !sband->n_bitrates))
  414. return -EINVAL;
  415. /*
  416. * Since cfg80211_disable_40mhz_24ghz is global, we can
  417. * modify the sband's ht data even if the driver uses a
  418. * global structure for that.
  419. */
  420. if (cfg80211_disable_40mhz_24ghz &&
  421. band == IEEE80211_BAND_2GHZ &&
  422. sband->ht_cap.ht_supported) {
  423. sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
  424. sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
  425. }
  426. /*
  427. * Since we use a u32 for rate bitmaps in
  428. * ieee80211_get_response_rate, we cannot
  429. * have more than 32 legacy rates.
  430. */
  431. if (WARN_ON(sband->n_bitrates > 32))
  432. return -EINVAL;
  433. for (i = 0; i < sband->n_channels; i++) {
  434. sband->channels[i].orig_flags =
  435. sband->channels[i].flags;
  436. sband->channels[i].orig_mag =
  437. sband->channels[i].max_antenna_gain;
  438. sband->channels[i].orig_mpwr =
  439. sband->channels[i].max_power;
  440. sband->channels[i].band = band;
  441. }
  442. have_band = true;
  443. }
  444. if (!have_band) {
  445. WARN_ON(1);
  446. return -EINVAL;
  447. }
  448. if (rdev->wiphy.wowlan.n_patterns) {
  449. if (WARN_ON(!rdev->wiphy.wowlan.pattern_min_len ||
  450. rdev->wiphy.wowlan.pattern_min_len >
  451. rdev->wiphy.wowlan.pattern_max_len))
  452. return -EINVAL;
  453. }
  454. /* check and set up bitrates */
  455. ieee80211_set_bitrate_flags(wiphy);
  456. mutex_lock(&cfg80211_mutex);
  457. res = device_add(&rdev->wiphy.dev);
  458. if (res) {
  459. mutex_unlock(&cfg80211_mutex);
  460. return res;
  461. }
  462. /* set up regulatory info */
  463. regulatory_update(wiphy, NL80211_REGDOM_SET_BY_CORE);
  464. list_add_rcu(&rdev->list, &cfg80211_rdev_list);
  465. cfg80211_rdev_list_generation++;
  466. /* add to debugfs */
  467. rdev->wiphy.debugfsdir =
  468. debugfs_create_dir(wiphy_name(&rdev->wiphy),
  469. ieee80211_debugfs_dir);
  470. if (IS_ERR(rdev->wiphy.debugfsdir))
  471. rdev->wiphy.debugfsdir = NULL;
  472. if (wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
  473. struct regulatory_request request;
  474. request.wiphy_idx = get_wiphy_idx(wiphy);
  475. request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
  476. request.alpha2[0] = '9';
  477. request.alpha2[1] = '9';
  478. nl80211_send_reg_change_event(&request);
  479. }
  480. cfg80211_debugfs_rdev_add(rdev);
  481. mutex_unlock(&cfg80211_mutex);
  482. /*
  483. * due to a locking dependency this has to be outside of the
  484. * cfg80211_mutex lock
  485. */
  486. res = rfkill_register(rdev->rfkill);
  487. if (res)
  488. goto out_rm_dev;
  489. rtnl_lock();
  490. rdev->wiphy.registered = true;
  491. rtnl_unlock();
  492. return 0;
  493. out_rm_dev:
  494. device_del(&rdev->wiphy.dev);
  495. return res;
  496. }
  497. EXPORT_SYMBOL(wiphy_register);
  498. void wiphy_rfkill_start_polling(struct wiphy *wiphy)
  499. {
  500. struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
  501. if (!rdev->ops->rfkill_poll)
  502. return;
  503. rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
  504. rfkill_resume_polling(rdev->rfkill);
  505. }
  506. EXPORT_SYMBOL(wiphy_rfkill_start_polling);
  507. void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
  508. {
  509. struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
  510. rfkill_pause_polling(rdev->rfkill);
  511. }
  512. EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
  513. void wiphy_unregister(struct wiphy *wiphy)
  514. {
  515. struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
  516. rtnl_lock();
  517. rdev->wiphy.registered = false;
  518. rtnl_unlock();
  519. rfkill_unregister(rdev->rfkill);
  520. /* protect the device list */
  521. mutex_lock(&cfg80211_mutex);
  522. wait_event(rdev->dev_wait, ({
  523. int __count;
  524. mutex_lock(&rdev->devlist_mtx);
  525. __count = rdev->opencount;
  526. mutex_unlock(&rdev->devlist_mtx);
  527. __count == 0;}));
  528. mutex_lock(&rdev->devlist_mtx);
  529. BUG_ON(!list_empty(&rdev->netdev_list));
  530. mutex_unlock(&rdev->devlist_mtx);
  531. /*
  532. * First remove the hardware from everywhere, this makes
  533. * it impossible to find from userspace.
  534. */
  535. debugfs_remove_recursive(rdev->wiphy.debugfsdir);
  536. list_del_rcu(&rdev->list);
  537. synchronize_rcu();
  538. /*
  539. * Try to grab rdev->mtx. If a command is still in progress,
  540. * hopefully the driver will refuse it since it's tearing
  541. * down the device already. We wait for this command to complete
  542. * before unlinking the item from the list.
  543. * Note: as codified by the BUG_ON above we cannot get here if
  544. * a virtual interface is still present. Hence, we can only get
  545. * to lock contention here if userspace issues a command that
  546. * identified the hardware by wiphy index.
  547. */
  548. cfg80211_lock_rdev(rdev);
  549. /* nothing */
  550. cfg80211_unlock_rdev(rdev);
  551. /* If this device got a regulatory hint tell core its
  552. * free to listen now to a new shiny device regulatory hint */
  553. reg_device_remove(wiphy);
  554. cfg80211_rdev_list_generation++;
  555. device_del(&rdev->wiphy.dev);
  556. mutex_unlock(&cfg80211_mutex);
  557. flush_work(&rdev->scan_done_wk);
  558. cancel_work_sync(&rdev->conn_work);
  559. flush_work(&rdev->event_work);
  560. }
  561. EXPORT_SYMBOL(wiphy_unregister);
  562. void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
  563. {
  564. struct cfg80211_internal_bss *scan, *tmp;
  565. rfkill_destroy(rdev->rfkill);
  566. mutex_destroy(&rdev->mtx);
  567. mutex_destroy(&rdev->devlist_mtx);
  568. mutex_destroy(&rdev->sched_scan_mtx);
  569. list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
  570. cfg80211_put_bss(&scan->pub);
  571. cfg80211_rdev_free_wowlan(rdev);
  572. kfree(rdev);
  573. }
  574. void wiphy_free(struct wiphy *wiphy)
  575. {
  576. put_device(&wiphy->dev);
  577. }
  578. EXPORT_SYMBOL(wiphy_free);
  579. void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
  580. {
  581. struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
  582. if (rfkill_set_hw_state(rdev->rfkill, blocked))
  583. schedule_work(&rdev->rfkill_sync);
  584. }
  585. EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
  586. static void wdev_cleanup_work(struct work_struct *work)
  587. {
  588. struct wireless_dev *wdev;
  589. struct cfg80211_registered_device *rdev;
  590. wdev = container_of(work, struct wireless_dev, cleanup_work);
  591. rdev = wiphy_to_dev(wdev->wiphy);
  592. cfg80211_lock_rdev(rdev);
  593. if (WARN_ON(rdev->scan_req && rdev->scan_req->dev == wdev->netdev)) {
  594. rdev->scan_req->aborted = true;
  595. ___cfg80211_scan_done(rdev, true);
  596. }
  597. cfg80211_unlock_rdev(rdev);
  598. mutex_lock(&rdev->sched_scan_mtx);
  599. if (WARN_ON(rdev->sched_scan_req &&
  600. rdev->sched_scan_req->dev == wdev->netdev)) {
  601. __cfg80211_stop_sched_scan(rdev, false);
  602. }
  603. mutex_unlock(&rdev->sched_scan_mtx);
  604. mutex_lock(&rdev->devlist_mtx);
  605. rdev->opencount--;
  606. mutex_unlock(&rdev->devlist_mtx);
  607. wake_up(&rdev->dev_wait);
  608. dev_put(wdev->netdev);
  609. }
  610. static struct device_type wiphy_type = {
  611. .name = "wlan",
  612. };
  613. static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
  614. unsigned long state,
  615. void *ndev)
  616. {
  617. struct net_device *dev = ndev;
  618. struct wireless_dev *wdev = dev->ieee80211_ptr;
  619. struct cfg80211_registered_device *rdev;
  620. int ret;
  621. if (!wdev)
  622. return NOTIFY_DONE;
  623. rdev = wiphy_to_dev(wdev->wiphy);
  624. WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
  625. switch (state) {
  626. case NETDEV_POST_INIT:
  627. SET_NETDEV_DEVTYPE(dev, &wiphy_type);
  628. break;
  629. case NETDEV_REGISTER:
  630. /*
  631. * NB: cannot take rdev->mtx here because this may be
  632. * called within code protected by it when interfaces
  633. * are added with nl80211.
  634. */
  635. mutex_init(&wdev->mtx);
  636. INIT_WORK(&wdev->cleanup_work, wdev_cleanup_work);
  637. INIT_LIST_HEAD(&wdev->event_list);
  638. spin_lock_init(&wdev->event_lock);
  639. INIT_LIST_HEAD(&wdev->mgmt_registrations);
  640. spin_lock_init(&wdev->mgmt_registrations_lock);
  641. mutex_lock(&rdev->devlist_mtx);
  642. list_add_rcu(&wdev->list, &rdev->netdev_list);
  643. rdev->devlist_generation++;
  644. /* can only change netns with wiphy */
  645. dev->features |= NETIF_F_NETNS_LOCAL;
  646. if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
  647. "phy80211")) {
  648. pr_err("failed to add phy80211 symlink to netdev!\n");
  649. }
  650. wdev->netdev = dev;
  651. wdev->sme_state = CFG80211_SME_IDLE;
  652. mutex_unlock(&rdev->devlist_mtx);
  653. #ifdef CONFIG_CFG80211_WEXT
  654. wdev->wext.default_key = -1;
  655. wdev->wext.default_mgmt_key = -1;
  656. wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
  657. #endif
  658. if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
  659. wdev->ps = true;
  660. else
  661. wdev->ps = false;
  662. /* allow mac80211 to determine the timeout */
  663. wdev->ps_timeout = -1;
  664. if (!dev->ethtool_ops)
  665. dev->ethtool_ops = &cfg80211_ethtool_ops;
  666. if ((wdev->iftype == NL80211_IFTYPE_STATION ||
  667. wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
  668. wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
  669. dev->priv_flags |= IFF_DONT_BRIDGE;
  670. break;
  671. case NETDEV_GOING_DOWN:
  672. switch (wdev->iftype) {
  673. case NL80211_IFTYPE_ADHOC:
  674. cfg80211_leave_ibss(rdev, dev, true);
  675. break;
  676. case NL80211_IFTYPE_P2P_CLIENT:
  677. case NL80211_IFTYPE_STATION:
  678. mutex_lock(&rdev->sched_scan_mtx);
  679. __cfg80211_stop_sched_scan(rdev, false);
  680. mutex_unlock(&rdev->sched_scan_mtx);
  681. wdev_lock(wdev);
  682. #ifdef CONFIG_CFG80211_WEXT
  683. kfree(wdev->wext.ie);
  684. wdev->wext.ie = NULL;
  685. wdev->wext.ie_len = 0;
  686. wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
  687. #endif
  688. __cfg80211_disconnect(rdev, dev,
  689. WLAN_REASON_DEAUTH_LEAVING, true);
  690. cfg80211_mlme_down(rdev, dev);
  691. wdev_unlock(wdev);
  692. break;
  693. case NL80211_IFTYPE_MESH_POINT:
  694. cfg80211_leave_mesh(rdev, dev);
  695. break;
  696. default:
  697. break;
  698. }
  699. wdev->beacon_interval = 0;
  700. break;
  701. case NETDEV_DOWN:
  702. dev_hold(dev);
  703. queue_work(cfg80211_wq, &wdev->cleanup_work);
  704. break;
  705. case NETDEV_UP:
  706. /*
  707. * If we have a really quick DOWN/UP succession we may
  708. * have this work still pending ... cancel it and see
  709. * if it was pending, in which case we need to account
  710. * for some of the work it would have done.
  711. */
  712. if (cancel_work_sync(&wdev->cleanup_work)) {
  713. mutex_lock(&rdev->devlist_mtx);
  714. rdev->opencount--;
  715. mutex_unlock(&rdev->devlist_mtx);
  716. dev_put(dev);
  717. }
  718. cfg80211_lock_rdev(rdev);
  719. mutex_lock(&rdev->devlist_mtx);
  720. wdev_lock(wdev);
  721. switch (wdev->iftype) {
  722. #ifdef CONFIG_CFG80211_WEXT
  723. case NL80211_IFTYPE_ADHOC:
  724. cfg80211_ibss_wext_join(rdev, wdev);
  725. break;
  726. case NL80211_IFTYPE_STATION:
  727. cfg80211_mgd_wext_connect(rdev, wdev);
  728. break;
  729. #endif
  730. #ifdef CONFIG_MAC80211_MESH
  731. case NL80211_IFTYPE_MESH_POINT:
  732. {
  733. /* backward compat code... */
  734. struct mesh_setup setup;
  735. memcpy(&setup, &default_mesh_setup,
  736. sizeof(setup));
  737. /* back compat only needed for mesh_id */
  738. setup.mesh_id = wdev->ssid;
  739. setup.mesh_id_len = wdev->mesh_id_up_len;
  740. if (wdev->mesh_id_up_len)
  741. __cfg80211_join_mesh(rdev, dev,
  742. &setup,
  743. &default_mesh_config);
  744. break;
  745. }
  746. #endif
  747. default:
  748. break;
  749. }
  750. wdev_unlock(wdev);
  751. rdev->opencount++;
  752. mutex_unlock(&rdev->devlist_mtx);
  753. cfg80211_unlock_rdev(rdev);
  754. /*
  755. * Configure power management to the driver here so that its
  756. * correctly set also after interface type changes etc.
  757. */
  758. if ((wdev->iftype == NL80211_IFTYPE_STATION ||
  759. wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
  760. rdev->ops->set_power_mgmt)
  761. if (rdev->ops->set_power_mgmt(wdev->wiphy, dev,
  762. wdev->ps,
  763. wdev->ps_timeout)) {
  764. /* assume this means it's off */
  765. wdev->ps = false;
  766. }
  767. break;
  768. case NETDEV_UNREGISTER:
  769. /*
  770. * NB: cannot take rdev->mtx here because this may be
  771. * called within code protected by it when interfaces
  772. * are removed with nl80211.
  773. */
  774. mutex_lock(&rdev->devlist_mtx);
  775. /*
  776. * It is possible to get NETDEV_UNREGISTER
  777. * multiple times. To detect that, check
  778. * that the interface is still on the list
  779. * of registered interfaces, and only then
  780. * remove and clean it up.
  781. */
  782. if (!list_empty(&wdev->list)) {
  783. sysfs_remove_link(&dev->dev.kobj, "phy80211");
  784. list_del_rcu(&wdev->list);
  785. rdev->devlist_generation++;
  786. cfg80211_mlme_purge_registrations(wdev);
  787. #ifdef CONFIG_CFG80211_WEXT
  788. kfree(wdev->wext.keys);
  789. #endif
  790. }
  791. mutex_unlock(&rdev->devlist_mtx);
  792. /*
  793. * synchronise (so that we won't find this netdev
  794. * from other code any more) and then clear the list
  795. * head so that the above code can safely check for
  796. * !list_empty() to avoid double-cleanup.
  797. */
  798. synchronize_rcu();
  799. INIT_LIST_HEAD(&wdev->list);
  800. break;
  801. case NETDEV_PRE_UP:
  802. if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
  803. return notifier_from_errno(-EOPNOTSUPP);
  804. if (rfkill_blocked(rdev->rfkill))
  805. return notifier_from_errno(-ERFKILL);
  806. ret = cfg80211_can_add_interface(rdev, wdev->iftype);
  807. if (ret)
  808. return notifier_from_errno(ret);
  809. break;
  810. }
  811. return NOTIFY_DONE;
  812. }
  813. static struct notifier_block cfg80211_netdev_notifier = {
  814. .notifier_call = cfg80211_netdev_notifier_call,
  815. };
  816. static void __net_exit cfg80211_pernet_exit(struct net *net)
  817. {
  818. struct cfg80211_registered_device *rdev;
  819. rtnl_lock();
  820. mutex_lock(&cfg80211_mutex);
  821. list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
  822. if (net_eq(wiphy_net(&rdev->wiphy), net))
  823. WARN_ON(cfg80211_switch_netns(rdev, &init_net));
  824. }
  825. mutex_unlock(&cfg80211_mutex);
  826. rtnl_unlock();
  827. }
  828. static struct pernet_operations cfg80211_pernet_ops = {
  829. .exit = cfg80211_pernet_exit,
  830. };
  831. static int __init cfg80211_init(void)
  832. {
  833. int err;
  834. err = register_pernet_device(&cfg80211_pernet_ops);
  835. if (err)
  836. goto out_fail_pernet;
  837. err = wiphy_sysfs_init();
  838. if (err)
  839. goto out_fail_sysfs;
  840. err = register_netdevice_notifier(&cfg80211_netdev_notifier);
  841. if (err)
  842. goto out_fail_notifier;
  843. err = nl80211_init();
  844. if (err)
  845. goto out_fail_nl80211;
  846. ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
  847. err = regulatory_init();
  848. if (err)
  849. goto out_fail_reg;
  850. cfg80211_wq = create_singlethread_workqueue("cfg80211");
  851. if (!cfg80211_wq)
  852. goto out_fail_wq;
  853. return 0;
  854. out_fail_wq:
  855. regulatory_exit();
  856. out_fail_reg:
  857. debugfs_remove(ieee80211_debugfs_dir);
  858. out_fail_nl80211:
  859. unregister_netdevice_notifier(&cfg80211_netdev_notifier);
  860. out_fail_notifier:
  861. wiphy_sysfs_exit();
  862. out_fail_sysfs:
  863. unregister_pernet_device(&cfg80211_pernet_ops);
  864. out_fail_pernet:
  865. return err;
  866. }
  867. subsys_initcall(cfg80211_init);
  868. static void __exit cfg80211_exit(void)
  869. {
  870. debugfs_remove(ieee80211_debugfs_dir);
  871. nl80211_exit();
  872. unregister_netdevice_notifier(&cfg80211_netdev_notifier);
  873. wiphy_sysfs_exit();
  874. regulatory_exit();
  875. unregister_pernet_device(&cfg80211_pernet_ops);
  876. destroy_workqueue(cfg80211_wq);
  877. }
  878. module_exit(cfg80211_exit);