linux-vybrid_public/arch/powerpc/boot/dts/p3060si.dtsi

/*
 * P3060 Silicon Device Tree Source
 *
 * Copyright 2011 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/dts-v1/;

/ {
	compatible = "fsl,P3060";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		ccsr = &soc;
		dcsr = &dcsr;

		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		pci0 = &pci0;
		pci1 = &pci1;
		usb0 = &usb0;
		usb1 = &usb1;
		dma0 = &dma0;
		dma1 = &dma1;
		msi0 = &msi0;
		msi1 = &msi1;
		msi2 = &msi2;

		crypto = &crypto;
		sec_jr0 = &sec_jr0;
		sec_jr1 = &sec_jr1;
		sec_jr2 = &sec_jr2;
		sec_jr3 = &sec_jr3;
		rtic_a = &rtic_a;
		rtic_b = &rtic_b;
		rtic_c = &rtic_c;
		rtic_d = &rtic_d;
		sec_mon = &sec_mon;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: PowerPC,e500mc@0 {
			device_type = "cpu";
			reg = <0>;
			next-level-cache = <&L2_0>;
			L2_0: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu1: PowerPC,e500mc@1 {
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2_1>;
			L2_1: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu4: PowerPC,e500mc@4 {
			device_type = "cpu";
			reg = <4>;
			next-level-cache = <&L2_4>;
			L2_4: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu5: PowerPC,e500mc@5 {
			device_type = "cpu";
			reg = <5>;
			next-level-cache = <&L2_5>;
			L2_5: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu6: PowerPC,e500mc@6 {
			device_type = "cpu";
			reg = <6>;
			next-level-cache = <&L2_6>;
			L2_6: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu7: PowerPC,e500mc@7 {
			device_type = "cpu";
			reg = <7>;
			next-level-cache = <&L2_7>;
			L2_7: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
	};

	dcsr: dcsr@f00000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,dcsr", "simple-bus";

		dcsr-epu@0 {
			compatible = "fsl,dcsr-epu";
			interrupts = <52 2 0 0
				      84 2 0 0
				      85 2 0 0>;
			interrupt-parent = <&mpic>;
			reg = <0x0 0x1000>;
		};
		dcsr-npc {
			compatible = "fsl,dcsr-npc";
			reg = <0x1000 0x1000 0x1000000 0x8000>;
		};
		dcsr-nxc@2000 {
			compatible = "fsl,dcsr-nxc";
			reg = <0x2000 0x1000>;
		};
		dcsr-corenet {
			compatible = "fsl,dcsr-corenet";
			reg = <0x8000 0x1000 0xB0000 0x1000>;
		};
		dcsr-dpaa@9000 {
			compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
			reg = <0x9000 0x1000>;
		};
		dcsr-ocn@11000 {
			compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
			reg = <0x11000 0x1000>;
		};
		dcsr-ddr@12000 {
			compatible = "fsl,dcsr-ddr";
			dev-handle = <&ddr>;
			reg = <0x12000 0x1000>;
		};
		dcsr-nal@18000 {
			compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
			reg = <0x18000 0x1000>;
		};
		dcsr-rcpm@22000 {
			compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
			reg = <0x22000 0x1000>;
		};
		dcsr-cpu-sb-proxy@40000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu0>;
			reg = <0x40000 0x1000>;
		};
		dcsr-cpu-sb-proxy@41000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu1>;
			reg = <0x41000 0x1000>;
		};
		dcsr-cpu-sb-proxy@44000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu4>;
			reg = <0x44000 0x1000>;
		};
		dcsr-cpu-sb-proxy@45000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu5>;
			reg = <0x45000 0x1000>;
		};
		dcsr-cpu-sb-proxy@46000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu6>;
			reg = <0x46000 0x1000>;
		};
		dcsr-cpu-sb-proxy@47000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu7>;
			reg = <0x47000 0x1000>;
		};
	};

	soc: soc@ffe000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;

		soc-sram-error {
			compatible = "fsl,soc-sram-error";
			interrupts = <16 2 1 29>;
		};

		corenet-law@0 {
			compatible = "fsl,corenet-law";
			reg = <0x0 0x1000>;
			fsl,num-laws = <32>;
		};

		ddr: memory-controller@8000 {
			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
			reg = <0x8000 0x1000>;
			interrupts = <16 2 1 23>;
		};

		cpc: l3-cache-controller@10000 {
			compatible = "fsl,p3060-l3-cache-controller", "cache";
			reg = <0x10000 0x1000
			       0x11000 0x1000>;
			interrupts = <16 2 1 27>;
		};

		corenet-cf@18000 {
			compatible = "fsl,corenet-cf";
			reg = <0x18000 0x1000>;
			interrupts = <16 2 1 31>;
			fsl,ccf-num-csdids = <32>;
			fsl,ccf-num-snoopids = <32>;
		};

		iommu@20000 {
			compatible = "fsl,pamu-v1.0", "fsl,pamu";
			reg = <0x20000 0x5000>;
			interrupts = <
				24 2 0 0
				16 2 1 30>;
		};

		mpic: pic@40000 {
			clock-frequency = <0>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <4>;
			reg = <0x40000 0x40000>;
			compatible = "fsl,mpic", "chrp,open-pic";
			device_type = "open-pic";
		};

		msi0: msi@41600 {
			compatible = "fsl,mpic-msi";
			reg = <0x41600 0x200>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xe0 0 0 0
				0xe1 0 0 0
				0xe2 0 0 0
				0xe3 0 0 0
				0xe4 0 0 0
				0xe5 0 0 0
				0xe6 0 0 0
				0xe7 0 0 0>;
		};

		msi1: msi@41800 {
			compatible = "fsl,mpic-msi";
			reg = <0x41800 0x200>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xe8 0 0 0
				0xe9 0 0 0
				0xea 0 0 0
				0xeb 0 0 0
				0xec 0 0 0
				0xed 0 0 0
				0xee 0 0 0
				0xef 0 0 0>;
		};

		msi2: msi@41a00 {
			compatible = "fsl,mpic-msi";
			reg = <0x41a00 0x200>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xf0 0 0 0
				0xf1 0 0 0
				0xf2 0 0 0
				0xf3 0 0 0
				0xf4 0 0 0
				0xf5 0 0 0
				0xf6 0 0 0
				0xf7 0 0 0>;
		};

		rmu: rmu@d3000 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,srio-rmu";
			reg = <0xd3000 0x500>;
			ranges = <0x0 0xd3000 0x500>;

			message-unit@0 {
				compatible = "fsl,srio-msg-unit";
				reg = <0x0 0x100>;
				interrupts = <
					60 2 0 0  /* msg1_tx_irq */
					61 2 0 0>;/* msg1_rx_irq */
			};
			message-unit@100 {
				compatible = "fsl,srio-msg-unit";
				reg = <0x100 0x100>;
				interrupts = <
					62 2 0 0  /* msg2_tx_irq */
					63 2 0 0>;/* msg2_rx_irq */
			};
			doorbell-unit@400 {
				compatible = "fsl,srio-dbell-unit";
				reg = <0x400 0x80>;
				interrupts = <
					56 2 0 0  /* bell_outb_irq */
					57 2 0 0>;/* bell_inb_irq */
			};
			port-write-unit@4e0 {
				compatible = "fsl,srio-port-write-unit";
				reg = <0x4e0 0x20>;
				interrupts = <16 2 1 11>;
			};
		};

		guts: global-utilities@e0000 {
			compatible = "fsl,qoriq-device-config-1.0";
			reg = <0xe0000 0xe00>;
			fsl,has-rstcr;
			#sleep-cells = <1>;
			fsl,liodn-bits = <12>;
		};

		pins: global-utilities@e0e00 {
			compatible = "fsl,qoriq-pin-control-1.0";
			reg = <0xe0e00 0x200>;
			#sleep-cells = <2>;
		};

		clockgen: global-utilities@e1000 {
			compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
			reg = <0xe1000 0x1000>;
			clock-frequency = <0>;
		};

		rcpm: global-utilities@e2000 {
			compatible = "fsl,qoriq-rcpm-1.0";
			reg = <0xe2000 0x1000>;
			#sleep-cells = <1>;
		};

		sfp: sfp@e8000 {
			compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
			reg	   = <0xe8000 0x1000>;
		};

		serdes: serdes@ea000 {
			compatible = "fsl,p3060-serdes";
			reg	   = <0xea000 0x1000>;
		};

		dma0: dma@100300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
			reg = <0x100300 0x4>;
			ranges = <0x0 0x100100 0x200>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupts = <28 2 0 0>;
			};
			dma-channel@80 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupts = <29 2 0 0>;
			};
			dma-channel@100 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupts = <30 2 0 0>;
			};
			dma-channel@180 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupts = <31 2 0 0>;
			};
		};

		dma1: dma@101300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
			reg = <0x101300 0x4>;
			ranges = <0x0 0x101100 0x200>;
			cell-index = <1>;
			dma-channel@0 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupts = <32 2 0 0>;
			};
			dma-channel@80 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupts = <33 2 0 0>;
			};
			dma-channel@100 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupts = <34 2 0 0>;
			};
			dma-channel@180 {
				compatible = "fsl,p3060-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupts = <35 2 0 0>;
			};
		};

		spi@110000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
			reg = <0x110000 0x1000>;
			interrupts = <53 0x2 0 0>;
			fsl,espi-num-chipselects = <4>;
		};

		i2c@118000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x118000 0x100>;
			interrupts = <38 2 0 0>;
			dfsrr;
		};

		i2c@118100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x118100 0x100>;
			interrupts = <38 2 0 0>;
			dfsrr;
		};

		i2c@119000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <2>;
			compatible = "fsl-i2c";
			reg = <0x119000 0x100>;
			interrupts = <39 2 0 0>;
			dfsrr;
		};

		i2c@119100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <3>;
			compatible = "fsl-i2c";
			reg = <0x119100 0x100>;
			interrupts = <39 2 0 0>;
			dfsrr;
		};

		serial0: serial@11c500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11c500 0x100>;
			clock-frequency = <0>;
			interrupts = <36 2 0 0>;
		};

		serial1: serial@11c600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11c600 0x100>;
			clock-frequency = <0>;
			interrupts = <36 2 0 0>;
		};

		serial2: serial@11d500 {
			cell-index = <2>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11d500 0x100>;
			clock-frequency = <0>;
			interrupts = <37 2 0 0>;
		};

		serial3: serial@11d600 {
			cell-index = <3>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11d600 0x100>;
			clock-frequency = <0>;
			interrupts = <37 2 0 0>;
		};

		gpio0: gpio@130000 {
			compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
			reg = <0x130000 0x1000>;
			interrupts = <55 2 0 0>;
			#gpio-cells = <2>;
			gpio-controller;
		};

		usb0: usb@210000 {
			compatible = "fsl,p3060-usb2-mph",
					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
			reg = <0x210000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <44 0x2 0 0>;
		};

		usb1: usb@211000 {
			compatible = "fsl,p3060-usb2-dr",
					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
			reg = <0x211000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <45 0x2 0 0>;
		};

		crypto: crypto@300000 {
			compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x300000 0x10000>;
			ranges = <0 0x300000 0x10000>;
			interrupt-parent = <&mpic>;
			interrupts = <92 2 0 0>;

			sec_jr0: jr@1000 {
				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
				reg = <0x1000 0x1000>;
				interrupt-parent = <&mpic>;
				interrupts = <88 2 0 0>;
			};

			sec_jr1: jr@2000 {
				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
				reg = <0x2000 0x1000>;
				interrupt-parent = <&mpic>;
				interrupts = <89 2 0 0>;
			};

			sec_jr2: jr@3000 {
				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
				reg = <0x3000 0x1000>;
				interrupt-parent = <&mpic>;
				interrupts = <90 2 0 0>;
			};

			sec_jr3: jr@4000 {
				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
				reg = <0x4000 0x1000>;
				interrupt-parent = <&mpic>;
				interrupts = <91 2 0 0>;
			};

			rtic@6000 {
				compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x6000 0x100>;
				ranges = <0x0 0x6100 0xe00>;

				rtic_a: rtic-a@0 {
					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
					reg = <0x00 0x20 0x100 0x80>;
				};

				rtic_b: rtic-b@20 {
					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
					reg = <0x20 0x20 0x200 0x80>;
				};

				rtic_c: rtic-c@40 {
					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
					reg = <0x40 0x20 0x300 0x80>;
				};

				rtic_d: rtic-d@60 {
					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
					reg = <0x60 0x20 0x500 0x80>;
				};
			};
		};

		sec_mon: sec_mon@314000 {
			compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
			reg = <0x314000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <93 2 0 0>;
		};
	};

	rapidio@ffe0c0000 {
		compatible = "fsl,srio";
		interrupts = <16 2 1 11>;
		#address-cells = <2>;
		#size-cells = <2>;
		fsl,srio-rmu-handle = <&rmu>;
		ranges;

		port1 {
			#address-cells = <2>;
			#size-cells = <2>;
			cell-index = <1>;
		};

		port2 {
			#address-cells = <2>;
			#size-cells = <2>;
			cell-index = <2>;
		};
	};

	localbus@ffe124000 {
		compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
		interrupts = <25 2 0 0>;
		#address-cells = <2>;
		#size-cells = <1>;
	};

	pci0: pcie@ffe200000 {
		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0x0 0xff>;
		clock-frequency = <33333333>;
		fsl,msi = <&msi0>;
		interrupts = <16 2 1 15>;
		pcie@0 {
			reg = <0 0 0 0 0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			interrupts = <16 2 1 15>;
			interrupt-map-mask = <0xf800 0 0 7>;
			interrupt-map = <
				/* IDSEL 0x0 */
				0000 0 0 1 &mpic 40 1 0 0
				0000 0 0 2 &mpic 1 1 0 0
				0000 0 0 3 &mpic 2 1 0 0
				0000 0 0 4 &mpic 3 1 0 0
				>;
		};
	};

	pci1: pcie@ffe201000 {
		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0 0xff>;
		clock-frequency = <33333333>;
		fsl,msi = <&msi1>;
		interrupts = <16 2 1 14>;
		pcie@0 {
			reg = <0 0 0 0 0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			interrupts = <16 2 1 14>;
			interrupt-map-mask = <0xf800 0 0 7>;
			interrupt-map = <
				/* IDSEL 0x0 */
				0000 0 0 1 &mpic 41 1 0 0
				0000 0 0 2 &mpic 5 1 0 0
				0000 0 0 3 &mpic 6 1 0 0
				0000 0 0 4 &mpic 7 1 0 0
				>;
		};
	};
};