1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283 |
- /*
- * Alchemy GPIO support.
- *
- * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
- * the same kernel image.
- * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
- * appropriate CPU type (AU1000 currently).
- */
- #ifndef _ALCHEMY_GPIO_H_
- #define _ALCHEMY_GPIO_H_
- #include <asm/mach-au1x00/au1000.h>
- #include <asm/mach-au1x00/gpio-au1000.h>
- /* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
- * register enables use of GPIOs as wake source.
- */
- static inline void alchemy_gpio1_input_enable(void)
- {
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
- __raw_writel(0, base + 0x110); /* the write op is key */
- wmb();
- }
- /* Linux gpio framework integration.
- *
- * 4 use cases of Alchemy GPIOS:
- *(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
- * Board must register gpiochips.
- *(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
- * A gpiochip for the 75 GPIOs is registered.
- *
- *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
- * the boards' gpio.h must provide the linux gpio wrapper functions,
- *
- *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
- * inlinable gpio functions are provided which enable access to the
- * Au1300 gpios only by using the numbers straight out of the data-
- * sheets.
- * Cases 1 and 3 are intended for boards which want to provide their own
- * GPIO namespace and -operations (i.e. for example you have 8 GPIOs
- * which are in part provided by spare Au1300 GPIO pins and in part by
- * an external FPGA but you still want them to be accssible in linux
- * as gpio0-7. The board can of course use the alchemy_gpioX_* functions
- * as required).
- */
- #ifdef CONFIG_GPIOLIB
- /* wraps the cpu-dependent irq_to_gpio functions */
- /* FIXME: gpiolib needs an irq_to_gpio hook */
- static inline int __au_irq_to_gpio(unsigned int irq)
- {
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
- return alchemy_irq_to_gpio(irq);
- }
- return -EINVAL;
- }
- /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
- #ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
- /* get everything through gpiolib */
- #define gpio_to_irq __gpio_to_irq
- #define gpio_get_value __gpio_get_value
- #define gpio_set_value __gpio_set_value
- #define gpio_cansleep __gpio_cansleep
- #define irq_to_gpio __au_irq_to_gpio
- #include <asm-generic/gpio.h>
- #endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
- #endif /* CONFIG_GPIOLIB */
- #endif /* _ALCHEMY_GPIO_H_ */
|