123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134 |
- /*
- * linux/include/asm-arm/arch-pxa/balloon3.h
- *
- * Authors: Nick Bane and Wookey
- * Created: Oct, 2005
- * Copyright: Toby Churchill Ltd
- * Cribbed from mainstone.c, by Nicholas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #ifndef ASM_ARCH_BALLOON3_H
- #define ASM_ARCH_BALLOON3_H
- enum balloon3_features {
- BALLOON3_FEATURE_OHCI,
- BALLOON3_FEATURE_MMC,
- BALLOON3_FEATURE_CF,
- BALLOON3_FEATURE_AUDIO,
- BALLOON3_FEATURE_TOPPOLY,
- };
- #define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
- #define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
- #define BALLOON3_FPGA_LENGTH 0x01000000
- /* FPGA/CPLD registers */
- #define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
- /* fixme - same for now */
- #define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
- #define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
- /* fpga/cpld interrupt control register */
- #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
- #define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
- #define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
- #define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
- #define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
- #define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
- #define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
- /* GPIOs for irqs */
- #define BALLOON3_GPIO_AUX_NIRQ (94)
- #define BALLOON3_GPIO_CODEC_IRQ (95)
- /* Timer and Idle LED locations */
- #define BALLOON3_GPIO_LED_NAND (9)
- #define BALLOON3_GPIO_LED_IDLE (10)
- /* backlight control */
- #define BALLOON3_GPIO_RUN_BACKLIGHT (99)
- #define BALLOON3_GPIO_S0_CD (105)
- /* FPGA Interrupt Mask/Acknowledge Register */
- #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
- #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
- /* CF Status Register */
- #define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
- #define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
- /* VDD sense / card status changed */
- /* CF control register (write) */
- #define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
- #define BALLOON3_PCMCIA_ENABLE (1 << 1)
- #define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
- /* CPLD (and FPGA) interface definitions */
- #define CPLD_LCD0_DATA_SET 0x00
- #define CPLD_LCD0_DATA_CLR 0x10
- #define CPLD_LCD0_COMMAND_SET 0x01
- #define CPLD_LCD0_COMMAND_CLR 0x11
- #define CPLD_LCD1_DATA_SET 0x02
- #define CPLD_LCD1_DATA_CLR 0x12
- #define CPLD_LCD1_COMMAND_SET 0x03
- #define CPLD_LCD1_COMMAND_CLR 0x13
- #define CPLD_MISC_SET 0x07
- #define CPLD_MISC_CLR 0x17
- #define CPLD_MISC_LOON_NRESET_BIT 0
- #define CPLD_MISC_LOON_UNSUSP_BIT 1
- #define CPLD_MISC_RUN_5V_BIT 2
- #define CPLD_MISC_CHG_D0_BIT 3
- #define CPLD_MISC_CHG_D1_BIT 4
- #define CPLD_MISC_DAC_NCS_BIT 5
- #define CPLD_LCD_SET 0x08
- #define CPLD_LCD_CLR 0x18
- #define CPLD_LCD_BACKLIGHT_EN_0_BIT 0
- #define CPLD_LCD_BACKLIGHT_EN_1_BIT 1
- #define CPLD_LCD_LED_RED_BIT 4
- #define CPLD_LCD_LED_GREEN_BIT 5
- #define CPLD_LCD_NRESET_BIT 7
- #define CPLD_LCD_RO_SET 0x09
- #define CPLD_LCD_RO_CLR 0x19
- #define CPLD_LCD_RO_LCD0_nWAIT_BIT 0
- #define CPLD_LCD_RO_LCD1_nWAIT_BIT 1
- #define CPLD_SERIAL_SET 0x0a
- #define CPLD_SERIAL_CLR 0x1a
- #define CPLD_SERIAL_GSM_RI_BIT 0
- #define CPLD_SERIAL_GSM_CTS_BIT 1
- #define CPLD_SERIAL_GSM_DTR_BIT 2
- #define CPLD_SERIAL_LPR_CTS_BIT 3
- #define CPLD_SERIAL_TC232_CTS_BIT 4
- #define CPLD_SERIAL_TC232_DSR_BIT 5
- #define CPLD_SROUTING_SET 0x0b
- #define CPLD_SROUTING_CLR 0x1b
- #define CPLD_SROUTING_MSP430_LPR 0
- #define CPLD_SROUTING_MSP430_TC232 1
- #define CPLD_SROUTING_MSP430_GSM 2
- #define CPLD_SROUTING_LOON_LPR (0 << 4)
- #define CPLD_SROUTING_LOON_TC232 (1 << 4)
- #define CPLD_SROUTING_LOON_GSM (2 << 4)
- #define CPLD_AROUTING_SET 0x0c
- #define CPLD_AROUTING_CLR 0x1c
- #define CPLD_AROUTING_MIC2PHONE_BIT 0
- #define CPLD_AROUTING_PHONE2INT_BIT 1
- #define CPLD_AROUTING_PHONE2EXT_BIT 2
- #define CPLD_AROUTING_LOONL2INT_BIT 3
- #define CPLD_AROUTING_LOONL2EXT_BIT 4
- #define CPLD_AROUTING_LOONR2PHONE_BIT 5
- #define CPLD_AROUTING_LOONR2INT_BIT 6
- #define CPLD_AROUTING_LOONR2EXT_BIT 7
- extern int balloon3_has(enum balloon3_features feature);
- #endif
|