ahci.c 30 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152
  1. /*
  2. * ahci.c - AHCI SATA support
  3. *
  4. * Maintained by: Jeff Garzik <jgarzik@pobox.com>
  5. * Please ALWAYS copy linux-ide@vger.kernel.org
  6. * on emails.
  7. *
  8. * Copyright 2004-2005 Red Hat, Inc.
  9. *
  10. *
  11. * This program is free software; you can redistribute it and/or modify
  12. * it under the terms of the GNU General Public License as published by
  13. * the Free Software Foundation; either version 2, or (at your option)
  14. * any later version.
  15. *
  16. * This program is distributed in the hope that it will be useful,
  17. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  19. * GNU General Public License for more details.
  20. *
  21. * You should have received a copy of the GNU General Public License
  22. * along with this program; see the file COPYING. If not, write to
  23. * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24. *
  25. *
  26. * libata documentation is available via 'make {ps|pdf}docs',
  27. * as Documentation/DocBook/libata.*
  28. *
  29. * AHCI hardware documentation:
  30. * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
  31. * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
  32. *
  33. */
  34. #include <linux/kernel.h>
  35. #include <linux/module.h>
  36. #include <linux/pci.h>
  37. #include <linux/init.h>
  38. #include <linux/blkdev.h>
  39. #include <linux/delay.h>
  40. #include <linux/interrupt.h>
  41. #include <linux/sched.h>
  42. #include <linux/dma-mapping.h>
  43. #include <linux/device.h>
  44. #include <scsi/scsi_host.h>
  45. #include <scsi/scsi_cmnd.h>
  46. #include <linux/libata.h>
  47. #include <asm/io.h>
  48. #define DRV_NAME "ahci"
  49. #define DRV_VERSION "1.01"
  50. enum {
  51. AHCI_PCI_BAR = 5,
  52. AHCI_MAX_SG = 168, /* hardware max is 64K */
  53. AHCI_DMA_BOUNDARY = 0xffffffff,
  54. AHCI_USE_CLUSTERING = 0,
  55. AHCI_CMD_SLOT_SZ = 32 * 32,
  56. AHCI_RX_FIS_SZ = 256,
  57. AHCI_CMD_TBL_HDR = 0x80,
  58. AHCI_CMD_TBL_CDB = 0x40,
  59. AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
  60. AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
  61. AHCI_RX_FIS_SZ,
  62. AHCI_IRQ_ON_SG = (1 << 31),
  63. AHCI_CMD_ATAPI = (1 << 5),
  64. AHCI_CMD_WRITE = (1 << 6),
  65. RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
  66. board_ahci = 0,
  67. /* global controller registers */
  68. HOST_CAP = 0x00, /* host capabilities */
  69. HOST_CTL = 0x04, /* global host control */
  70. HOST_IRQ_STAT = 0x08, /* interrupt status */
  71. HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
  72. HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
  73. /* HOST_CTL bits */
  74. HOST_RESET = (1 << 0), /* reset controller; self-clear */
  75. HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
  76. HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
  77. /* HOST_CAP bits */
  78. HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
  79. /* registers for each SATA port */
  80. PORT_LST_ADDR = 0x00, /* command list DMA addr */
  81. PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
  82. PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
  83. PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
  84. PORT_IRQ_STAT = 0x10, /* interrupt status */
  85. PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
  86. PORT_CMD = 0x18, /* port command */
  87. PORT_TFDATA = 0x20, /* taskfile data */
  88. PORT_SIG = 0x24, /* device TF signature */
  89. PORT_CMD_ISSUE = 0x38, /* command issue */
  90. PORT_SCR = 0x28, /* SATA phy register block */
  91. PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
  92. PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
  93. PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
  94. PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
  95. /* PORT_IRQ_{STAT,MASK} bits */
  96. PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
  97. PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
  98. PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
  99. PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
  100. PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
  101. PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
  102. PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
  103. PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
  104. PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
  105. PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
  106. PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
  107. PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
  108. PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
  109. PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
  110. PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
  111. PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
  112. PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
  113. PORT_IRQ_FATAL = PORT_IRQ_TF_ERR |
  114. PORT_IRQ_HBUS_ERR |
  115. PORT_IRQ_HBUS_DATA_ERR |
  116. PORT_IRQ_IF_ERR,
  117. DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY |
  118. PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE |
  119. PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS |
  120. PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS |
  121. PORT_IRQ_D2H_REG_FIS,
  122. /* PORT_CMD bits */
  123. PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
  124. PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
  125. PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
  126. PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
  127. PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
  128. PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
  129. PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
  130. PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
  131. PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
  132. PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
  133. /* hpriv->flags bits */
  134. AHCI_FLAG_MSI = (1 << 0),
  135. };
  136. struct ahci_cmd_hdr {
  137. u32 opts;
  138. u32 status;
  139. u32 tbl_addr;
  140. u32 tbl_addr_hi;
  141. u32 reserved[4];
  142. };
  143. struct ahci_sg {
  144. u32 addr;
  145. u32 addr_hi;
  146. u32 reserved;
  147. u32 flags_size;
  148. };
  149. struct ahci_host_priv {
  150. unsigned long flags;
  151. u32 cap; /* cache of HOST_CAP register */
  152. u32 port_map; /* cache of HOST_PORTS_IMPL reg */
  153. };
  154. struct ahci_port_priv {
  155. struct ahci_cmd_hdr *cmd_slot;
  156. dma_addr_t cmd_slot_dma;
  157. void *cmd_tbl;
  158. dma_addr_t cmd_tbl_dma;
  159. struct ahci_sg *cmd_tbl_sg;
  160. void *rx_fis;
  161. dma_addr_t rx_fis_dma;
  162. };
  163. static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
  164. static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
  165. static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
  166. static int ahci_qc_issue(struct ata_queued_cmd *qc);
  167. static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
  168. static void ahci_phy_reset(struct ata_port *ap);
  169. static void ahci_irq_clear(struct ata_port *ap);
  170. static void ahci_eng_timeout(struct ata_port *ap);
  171. static int ahci_port_start(struct ata_port *ap);
  172. static void ahci_port_stop(struct ata_port *ap);
  173. static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
  174. static void ahci_qc_prep(struct ata_queued_cmd *qc);
  175. static u8 ahci_check_status(struct ata_port *ap);
  176. static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
  177. static void ahci_remove_one (struct pci_dev *pdev);
  178. static struct scsi_host_template ahci_sht = {
  179. .module = THIS_MODULE,
  180. .name = DRV_NAME,
  181. .ioctl = ata_scsi_ioctl,
  182. .queuecommand = ata_scsi_queuecmd,
  183. .eh_strategy_handler = ata_scsi_error,
  184. .can_queue = ATA_DEF_QUEUE,
  185. .this_id = ATA_SHT_THIS_ID,
  186. .sg_tablesize = AHCI_MAX_SG,
  187. .max_sectors = ATA_MAX_SECTORS,
  188. .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
  189. .emulated = ATA_SHT_EMULATED,
  190. .use_clustering = AHCI_USE_CLUSTERING,
  191. .proc_name = DRV_NAME,
  192. .dma_boundary = AHCI_DMA_BOUNDARY,
  193. .slave_configure = ata_scsi_slave_config,
  194. .bios_param = ata_std_bios_param,
  195. .ordered_flush = 1,
  196. };
  197. static const struct ata_port_operations ahci_ops = {
  198. .port_disable = ata_port_disable,
  199. .check_status = ahci_check_status,
  200. .check_altstatus = ahci_check_status,
  201. .dev_select = ata_noop_dev_select,
  202. .tf_read = ahci_tf_read,
  203. .phy_reset = ahci_phy_reset,
  204. .qc_prep = ahci_qc_prep,
  205. .qc_issue = ahci_qc_issue,
  206. .eng_timeout = ahci_eng_timeout,
  207. .irq_handler = ahci_interrupt,
  208. .irq_clear = ahci_irq_clear,
  209. .scr_read = ahci_scr_read,
  210. .scr_write = ahci_scr_write,
  211. .port_start = ahci_port_start,
  212. .port_stop = ahci_port_stop,
  213. };
  214. static struct ata_port_info ahci_port_info[] = {
  215. /* board_ahci */
  216. {
  217. .sht = &ahci_sht,
  218. .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
  219. ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
  220. ATA_FLAG_PIO_DMA,
  221. .pio_mask = 0x1f, /* pio0-4 */
  222. .udma_mask = 0x7f, /* udma0-6 ; FIXME */
  223. .port_ops = &ahci_ops,
  224. },
  225. };
  226. static const struct pci_device_id ahci_pci_tbl[] = {
  227. { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  228. board_ahci }, /* ICH6 */
  229. { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  230. board_ahci }, /* ICH6M */
  231. { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  232. board_ahci }, /* ICH7 */
  233. { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  234. board_ahci }, /* ICH7M */
  235. { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  236. board_ahci }, /* ICH7R */
  237. { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  238. board_ahci }, /* ULi M5288 */
  239. { PCI_VENDOR_ID_INTEL, 0x2681, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  240. board_ahci }, /* ESB2 */
  241. { PCI_VENDOR_ID_INTEL, 0x2682, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  242. board_ahci }, /* ESB2 */
  243. { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  244. board_ahci }, /* ESB2 */
  245. { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
  246. board_ahci }, /* ICH7-M DH */
  247. { } /* terminate list */
  248. };
  249. static struct pci_driver ahci_pci_driver = {
  250. .name = DRV_NAME,
  251. .id_table = ahci_pci_tbl,
  252. .probe = ahci_init_one,
  253. .remove = ahci_remove_one,
  254. };
  255. static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port)
  256. {
  257. return base + 0x100 + (port * 0x80);
  258. }
  259. static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port)
  260. {
  261. return (void __iomem *) ahci_port_base_ul((unsigned long)base, port);
  262. }
  263. static int ahci_port_start(struct ata_port *ap)
  264. {
  265. struct device *dev = ap->host_set->dev;
  266. struct ahci_host_priv *hpriv = ap->host_set->private_data;
  267. struct ahci_port_priv *pp;
  268. void __iomem *mmio = ap->host_set->mmio_base;
  269. void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
  270. void *mem;
  271. dma_addr_t mem_dma;
  272. int rc;
  273. pp = kmalloc(sizeof(*pp), GFP_KERNEL);
  274. if (!pp)
  275. return -ENOMEM;
  276. memset(pp, 0, sizeof(*pp));
  277. rc = ata_pad_alloc(ap, dev);
  278. if (rc) {
  279. kfree(pp);
  280. return rc;
  281. }
  282. mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL);
  283. if (!mem) {
  284. ata_pad_free(ap, dev);
  285. kfree(pp);
  286. return -ENOMEM;
  287. }
  288. memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
  289. /*
  290. * First item in chunk of DMA memory: 32-slot command table,
  291. * 32 bytes each in size
  292. */
  293. pp->cmd_slot = mem;
  294. pp->cmd_slot_dma = mem_dma;
  295. mem += AHCI_CMD_SLOT_SZ;
  296. mem_dma += AHCI_CMD_SLOT_SZ;
  297. /*
  298. * Second item: Received-FIS area
  299. */
  300. pp->rx_fis = mem;
  301. pp->rx_fis_dma = mem_dma;
  302. mem += AHCI_RX_FIS_SZ;
  303. mem_dma += AHCI_RX_FIS_SZ;
  304. /*
  305. * Third item: data area for storing a single command
  306. * and its scatter-gather table
  307. */
  308. pp->cmd_tbl = mem;
  309. pp->cmd_tbl_dma = mem_dma;
  310. pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR;
  311. ap->private_data = pp;
  312. if (hpriv->cap & HOST_CAP_64)
  313. writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
  314. writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
  315. readl(port_mmio + PORT_LST_ADDR); /* flush */
  316. if (hpriv->cap & HOST_CAP_64)
  317. writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
  318. writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
  319. readl(port_mmio + PORT_FIS_ADDR); /* flush */
  320. writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
  321. PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
  322. PORT_CMD_START, port_mmio + PORT_CMD);
  323. readl(port_mmio + PORT_CMD); /* flush */
  324. return 0;
  325. }
  326. static void ahci_port_stop(struct ata_port *ap)
  327. {
  328. struct device *dev = ap->host_set->dev;
  329. struct ahci_port_priv *pp = ap->private_data;
  330. void __iomem *mmio = ap->host_set->mmio_base;
  331. void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
  332. u32 tmp;
  333. tmp = readl(port_mmio + PORT_CMD);
  334. tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX);
  335. writel(tmp, port_mmio + PORT_CMD);
  336. readl(port_mmio + PORT_CMD); /* flush */
  337. /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so
  338. * this is slightly incorrect.
  339. */
  340. msleep(500);
  341. ap->private_data = NULL;
  342. dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ,
  343. pp->cmd_slot, pp->cmd_slot_dma);
  344. ata_pad_free(ap, dev);
  345. kfree(pp);
  346. }
  347. static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
  348. {
  349. unsigned int sc_reg;
  350. switch (sc_reg_in) {
  351. case SCR_STATUS: sc_reg = 0; break;
  352. case SCR_CONTROL: sc_reg = 1; break;
  353. case SCR_ERROR: sc_reg = 2; break;
  354. case SCR_ACTIVE: sc_reg = 3; break;
  355. default:
  356. return 0xffffffffU;
  357. }
  358. return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
  359. }
  360. static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
  361. u32 val)
  362. {
  363. unsigned int sc_reg;
  364. switch (sc_reg_in) {
  365. case SCR_STATUS: sc_reg = 0; break;
  366. case SCR_CONTROL: sc_reg = 1; break;
  367. case SCR_ERROR: sc_reg = 2; break;
  368. case SCR_ACTIVE: sc_reg = 3; break;
  369. default:
  370. return;
  371. }
  372. writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
  373. }
  374. static void ahci_phy_reset(struct ata_port *ap)
  375. {
  376. void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
  377. struct ata_taskfile tf;
  378. struct ata_device *dev = &ap->device[0];
  379. u32 new_tmp, tmp;
  380. __sata_phy_reset(ap);
  381. if (ap->flags & ATA_FLAG_PORT_DISABLED)
  382. return;
  383. tmp = readl(port_mmio + PORT_SIG);
  384. tf.lbah = (tmp >> 24) & 0xff;
  385. tf.lbam = (tmp >> 16) & 0xff;
  386. tf.lbal = (tmp >> 8) & 0xff;
  387. tf.nsect = (tmp) & 0xff;
  388. dev->class = ata_dev_classify(&tf);
  389. if (!ata_dev_present(dev)) {
  390. ata_port_disable(ap);
  391. return;
  392. }
  393. /* Make sure port's ATAPI bit is set appropriately */
  394. new_tmp = tmp = readl(port_mmio + PORT_CMD);
  395. if (dev->class == ATA_DEV_ATAPI)
  396. new_tmp |= PORT_CMD_ATAPI;
  397. else
  398. new_tmp &= ~PORT_CMD_ATAPI;
  399. if (new_tmp != tmp) {
  400. writel(new_tmp, port_mmio + PORT_CMD);
  401. readl(port_mmio + PORT_CMD); /* flush */
  402. }
  403. }
  404. static u8 ahci_check_status(struct ata_port *ap)
  405. {
  406. void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
  407. return readl(mmio + PORT_TFDATA) & 0xFF;
  408. }
  409. static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
  410. {
  411. struct ahci_port_priv *pp = ap->private_data;
  412. u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
  413. ata_tf_from_fis(d2h_fis, tf);
  414. }
  415. static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc)
  416. {
  417. struct ahci_port_priv *pp = qc->ap->private_data;
  418. struct scatterlist *sg;
  419. struct ahci_sg *ahci_sg;
  420. unsigned int n_sg = 0;
  421. VPRINTK("ENTER\n");
  422. /*
  423. * Next, the S/G list.
  424. */
  425. ahci_sg = pp->cmd_tbl_sg;
  426. ata_for_each_sg(sg, qc) {
  427. dma_addr_t addr = sg_dma_address(sg);
  428. u32 sg_len = sg_dma_len(sg);
  429. ahci_sg->addr = cpu_to_le32(addr & 0xffffffff);
  430. ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
  431. ahci_sg->flags_size = cpu_to_le32(sg_len - 1);
  432. ahci_sg++;
  433. n_sg++;
  434. }
  435. return n_sg;
  436. }
  437. static void ahci_qc_prep(struct ata_queued_cmd *qc)
  438. {
  439. struct ata_port *ap = qc->ap;
  440. struct ahci_port_priv *pp = ap->private_data;
  441. u32 opts;
  442. const u32 cmd_fis_len = 5; /* five dwords */
  443. unsigned int n_elem;
  444. /*
  445. * Fill in command slot information (currently only one slot,
  446. * slot 0, is currently since we don't do queueing)
  447. */
  448. opts = cmd_fis_len;
  449. if (qc->tf.flags & ATA_TFLAG_WRITE)
  450. opts |= AHCI_CMD_WRITE;
  451. if (is_atapi_taskfile(&qc->tf))
  452. opts |= AHCI_CMD_ATAPI;
  453. pp->cmd_slot[0].opts = cpu_to_le32(opts);
  454. pp->cmd_slot[0].status = 0;
  455. pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
  456. pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
  457. /*
  458. * Fill in command table information. First, the header,
  459. * a SATA Register - Host to Device command FIS.
  460. */
  461. ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0);
  462. if (opts & AHCI_CMD_ATAPI) {
  463. memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
  464. memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len);
  465. }
  466. if (!(qc->flags & ATA_QCFLAG_DMAMAP))
  467. return;
  468. n_elem = ahci_fill_sg(qc);
  469. pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16);
  470. }
  471. static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
  472. {
  473. void __iomem *mmio = ap->host_set->mmio_base;
  474. void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
  475. u32 tmp;
  476. int work;
  477. /* stop DMA */
  478. tmp = readl(port_mmio + PORT_CMD);
  479. tmp &= ~PORT_CMD_START;
  480. writel(tmp, port_mmio + PORT_CMD);
  481. /* wait for engine to stop. TODO: this could be
  482. * as long as 500 msec
  483. */
  484. work = 1000;
  485. while (work-- > 0) {
  486. tmp = readl(port_mmio + PORT_CMD);
  487. if ((tmp & PORT_CMD_LIST_ON) == 0)
  488. break;
  489. udelay(10);
  490. }
  491. /* clear SATA phy error, if any */
  492. tmp = readl(port_mmio + PORT_SCR_ERR);
  493. writel(tmp, port_mmio + PORT_SCR_ERR);
  494. /* if DRQ/BSY is set, device needs to be reset.
  495. * if so, issue COMRESET
  496. */
  497. tmp = readl(port_mmio + PORT_TFDATA);
  498. if (tmp & (ATA_BUSY | ATA_DRQ)) {
  499. writel(0x301, port_mmio + PORT_SCR_CTL);
  500. readl(port_mmio + PORT_SCR_CTL); /* flush */
  501. udelay(10);
  502. writel(0x300, port_mmio + PORT_SCR_CTL);
  503. readl(port_mmio + PORT_SCR_CTL); /* flush */
  504. }
  505. /* re-start DMA */
  506. tmp = readl(port_mmio + PORT_CMD);
  507. tmp |= PORT_CMD_START;
  508. writel(tmp, port_mmio + PORT_CMD);
  509. readl(port_mmio + PORT_CMD); /* flush */
  510. printk(KERN_WARNING "ata%u: error occurred, port reset (%s%s%s%s)\n",
  511. ap->id,
  512. irq_stat & PORT_IRQ_TF_ERR ? "taskf " : "",
  513. irq_stat & PORT_IRQ_HBUS_ERR ? "hbus " : "",
  514. irq_stat & PORT_IRQ_HBUS_DATA_ERR ? "hbus_data " : "",
  515. irq_stat & PORT_IRQ_IF_ERR ? "if " : "");
  516. }
  517. static void ahci_eng_timeout(struct ata_port *ap)
  518. {
  519. struct ata_host_set *host_set = ap->host_set;
  520. void __iomem *mmio = host_set->mmio_base;
  521. void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
  522. struct ata_queued_cmd *qc;
  523. unsigned long flags;
  524. DPRINTK("ENTER\n");
  525. spin_lock_irqsave(&host_set->lock, flags);
  526. qc = ata_qc_from_tag(ap, ap->active_tag);
  527. if (!qc) {
  528. printk(KERN_ERR "ata%u: BUG: timeout without command\n",
  529. ap->id);
  530. } else {
  531. ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT));
  532. /* hack alert! We cannot use the supplied completion
  533. * function from inside the ->eh_strategy_handler() thread.
  534. * libata is the only user of ->eh_strategy_handler() in
  535. * any kernel, so the default scsi_done() assumes it is
  536. * not being called from the SCSI EH.
  537. */
  538. qc->scsidone = scsi_finish_command;
  539. ata_qc_complete(qc, AC_ERR_OTHER);
  540. }
  541. spin_unlock_irqrestore(&host_set->lock, flags);
  542. }
  543. static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
  544. {
  545. void __iomem *mmio = ap->host_set->mmio_base;
  546. void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
  547. u32 status, serr, ci;
  548. serr = readl(port_mmio + PORT_SCR_ERR);
  549. writel(serr, port_mmio + PORT_SCR_ERR);
  550. status = readl(port_mmio + PORT_IRQ_STAT);
  551. writel(status, port_mmio + PORT_IRQ_STAT);
  552. ci = readl(port_mmio + PORT_CMD_ISSUE);
  553. if (likely((ci & 0x1) == 0)) {
  554. if (qc) {
  555. ata_qc_complete(qc, 0);
  556. qc = NULL;
  557. }
  558. }
  559. if (status & PORT_IRQ_FATAL) {
  560. unsigned int err_mask;
  561. if (status & PORT_IRQ_TF_ERR)
  562. err_mask = AC_ERR_DEV;
  563. else if (status & PORT_IRQ_IF_ERR)
  564. err_mask = AC_ERR_ATA_BUS;
  565. else
  566. err_mask = AC_ERR_HOST_BUS;
  567. if (err_mask != AC_ERR_DEV)
  568. ahci_intr_error(ap, status);
  569. if (qc)
  570. ata_qc_complete(qc, err_mask);
  571. }
  572. return 1;
  573. }
  574. static void ahci_irq_clear(struct ata_port *ap)
  575. {
  576. /* TODO */
  577. }
  578. static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
  579. {
  580. struct ata_host_set *host_set = dev_instance;
  581. struct ahci_host_priv *hpriv;
  582. unsigned int i, handled = 0;
  583. void __iomem *mmio;
  584. u32 irq_stat, irq_ack = 0;
  585. VPRINTK("ENTER\n");
  586. hpriv = host_set->private_data;
  587. mmio = host_set->mmio_base;
  588. /* sigh. 0xffffffff is a valid return from h/w */
  589. irq_stat = readl(mmio + HOST_IRQ_STAT);
  590. irq_stat &= hpriv->port_map;
  591. if (!irq_stat)
  592. return IRQ_NONE;
  593. spin_lock(&host_set->lock);
  594. for (i = 0; i < host_set->n_ports; i++) {
  595. struct ata_port *ap;
  596. if (!(irq_stat & (1 << i)))
  597. continue;
  598. ap = host_set->ports[i];
  599. if (ap) {
  600. struct ata_queued_cmd *qc;
  601. qc = ata_qc_from_tag(ap, ap->active_tag);
  602. if (!ahci_host_intr(ap, qc))
  603. if (ata_ratelimit()) {
  604. struct pci_dev *pdev =
  605. to_pci_dev(ap->host_set->dev);
  606. dev_printk(KERN_WARNING, &pdev->dev,
  607. "unhandled interrupt on port %u\n",
  608. i);
  609. }
  610. VPRINTK("port %u\n", i);
  611. } else {
  612. VPRINTK("port %u (no irq)\n", i);
  613. if (ata_ratelimit()) {
  614. struct pci_dev *pdev =
  615. to_pci_dev(ap->host_set->dev);
  616. dev_printk(KERN_WARNING, &pdev->dev,
  617. "interrupt on disabled port %u\n", i);
  618. }
  619. }
  620. irq_ack |= (1 << i);
  621. }
  622. if (irq_ack) {
  623. writel(irq_ack, mmio + HOST_IRQ_STAT);
  624. handled = 1;
  625. }
  626. spin_unlock(&host_set->lock);
  627. VPRINTK("EXIT\n");
  628. return IRQ_RETVAL(handled);
  629. }
  630. static int ahci_qc_issue(struct ata_queued_cmd *qc)
  631. {
  632. struct ata_port *ap = qc->ap;
  633. void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
  634. writel(1, port_mmio + PORT_CMD_ISSUE);
  635. readl(port_mmio + PORT_CMD_ISSUE); /* flush */
  636. return 0;
  637. }
  638. static void ahci_setup_port(struct ata_ioports *port, unsigned long base,
  639. unsigned int port_idx)
  640. {
  641. VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx);
  642. base = ahci_port_base_ul(base, port_idx);
  643. VPRINTK("base now==0x%lx\n", base);
  644. port->cmd_addr = base;
  645. port->scr_addr = base + PORT_SCR;
  646. VPRINTK("EXIT\n");
  647. }
  648. static int ahci_host_init(struct ata_probe_ent *probe_ent)
  649. {
  650. struct ahci_host_priv *hpriv = probe_ent->private_data;
  651. struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
  652. void __iomem *mmio = probe_ent->mmio_base;
  653. u32 tmp, cap_save;
  654. u16 tmp16;
  655. unsigned int i, j, using_dac;
  656. int rc;
  657. void __iomem *port_mmio;
  658. cap_save = readl(mmio + HOST_CAP);
  659. cap_save &= ( (1<<28) | (1<<17) );
  660. cap_save |= (1 << 27);
  661. /* global controller reset */
  662. tmp = readl(mmio + HOST_CTL);
  663. if ((tmp & HOST_RESET) == 0) {
  664. writel(tmp | HOST_RESET, mmio + HOST_CTL);
  665. readl(mmio + HOST_CTL); /* flush */
  666. }
  667. /* reset must complete within 1 second, or
  668. * the hardware should be considered fried.
  669. */
  670. ssleep(1);
  671. tmp = readl(mmio + HOST_CTL);
  672. if (tmp & HOST_RESET) {
  673. dev_printk(KERN_ERR, &pdev->dev,
  674. "controller reset failed (0x%x)\n", tmp);
  675. return -EIO;
  676. }
  677. writel(HOST_AHCI_EN, mmio + HOST_CTL);
  678. (void) readl(mmio + HOST_CTL); /* flush */
  679. writel(cap_save, mmio + HOST_CAP);
  680. writel(0xf, mmio + HOST_PORTS_IMPL);
  681. (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
  682. pci_read_config_word(pdev, 0x92, &tmp16);
  683. tmp16 |= 0xf;
  684. pci_write_config_word(pdev, 0x92, tmp16);
  685. hpriv->cap = readl(mmio + HOST_CAP);
  686. hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
  687. probe_ent->n_ports = (hpriv->cap & 0x1f) + 1;
  688. VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n",
  689. hpriv->cap, hpriv->port_map, probe_ent->n_ports);
  690. using_dac = hpriv->cap & HOST_CAP_64;
  691. if (using_dac &&
  692. !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
  693. rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
  694. if (rc) {
  695. rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
  696. if (rc) {
  697. dev_printk(KERN_ERR, &pdev->dev,
  698. "64-bit DMA enable failed\n");
  699. return rc;
  700. }
  701. }
  702. } else {
  703. rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
  704. if (rc) {
  705. dev_printk(KERN_ERR, &pdev->dev,
  706. "32-bit DMA enable failed\n");
  707. return rc;
  708. }
  709. rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
  710. if (rc) {
  711. dev_printk(KERN_ERR, &pdev->dev,
  712. "32-bit consistent DMA enable failed\n");
  713. return rc;
  714. }
  715. }
  716. for (i = 0; i < probe_ent->n_ports; i++) {
  717. #if 0 /* BIOSen initialize this incorrectly */
  718. if (!(hpriv->port_map & (1 << i)))
  719. continue;
  720. #endif
  721. port_mmio = ahci_port_base(mmio, i);
  722. VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio);
  723. ahci_setup_port(&probe_ent->port[i],
  724. (unsigned long) mmio, i);
  725. /* make sure port is not active */
  726. tmp = readl(port_mmio + PORT_CMD);
  727. VPRINTK("PORT_CMD 0x%x\n", tmp);
  728. if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
  729. PORT_CMD_FIS_RX | PORT_CMD_START)) {
  730. tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
  731. PORT_CMD_FIS_RX | PORT_CMD_START);
  732. writel(tmp, port_mmio + PORT_CMD);
  733. readl(port_mmio + PORT_CMD); /* flush */
  734. /* spec says 500 msecs for each bit, so
  735. * this is slightly incorrect.
  736. */
  737. msleep(500);
  738. }
  739. writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
  740. j = 0;
  741. while (j < 100) {
  742. msleep(10);
  743. tmp = readl(port_mmio + PORT_SCR_STAT);
  744. if ((tmp & 0xf) == 0x3)
  745. break;
  746. j++;
  747. }
  748. tmp = readl(port_mmio + PORT_SCR_ERR);
  749. VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
  750. writel(tmp, port_mmio + PORT_SCR_ERR);
  751. /* ack any pending irq events for this port */
  752. tmp = readl(port_mmio + PORT_IRQ_STAT);
  753. VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
  754. if (tmp)
  755. writel(tmp, port_mmio + PORT_IRQ_STAT);
  756. writel(1 << i, mmio + HOST_IRQ_STAT);
  757. /* set irq mask (enables interrupts) */
  758. writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
  759. }
  760. tmp = readl(mmio + HOST_CTL);
  761. VPRINTK("HOST_CTL 0x%x\n", tmp);
  762. writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
  763. tmp = readl(mmio + HOST_CTL);
  764. VPRINTK("HOST_CTL 0x%x\n", tmp);
  765. pci_set_master(pdev);
  766. return 0;
  767. }
  768. static void ahci_print_info(struct ata_probe_ent *probe_ent)
  769. {
  770. struct ahci_host_priv *hpriv = probe_ent->private_data;
  771. struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
  772. void __iomem *mmio = probe_ent->mmio_base;
  773. u32 vers, cap, impl, speed;
  774. const char *speed_s;
  775. u16 cc;
  776. const char *scc_s;
  777. vers = readl(mmio + HOST_VERSION);
  778. cap = hpriv->cap;
  779. impl = hpriv->port_map;
  780. speed = (cap >> 20) & 0xf;
  781. if (speed == 1)
  782. speed_s = "1.5";
  783. else if (speed == 2)
  784. speed_s = "3";
  785. else
  786. speed_s = "?";
  787. pci_read_config_word(pdev, 0x0a, &cc);
  788. if (cc == 0x0101)
  789. scc_s = "IDE";
  790. else if (cc == 0x0106)
  791. scc_s = "SATA";
  792. else if (cc == 0x0104)
  793. scc_s = "RAID";
  794. else
  795. scc_s = "unknown";
  796. dev_printk(KERN_INFO, &pdev->dev,
  797. "AHCI %02x%02x.%02x%02x "
  798. "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
  799. ,
  800. (vers >> 24) & 0xff,
  801. (vers >> 16) & 0xff,
  802. (vers >> 8) & 0xff,
  803. vers & 0xff,
  804. ((cap >> 8) & 0x1f) + 1,
  805. (cap & 0x1f) + 1,
  806. speed_s,
  807. impl,
  808. scc_s);
  809. dev_printk(KERN_INFO, &pdev->dev,
  810. "flags: "
  811. "%s%s%s%s%s%s"
  812. "%s%s%s%s%s%s%s\n"
  813. ,
  814. cap & (1 << 31) ? "64bit " : "",
  815. cap & (1 << 30) ? "ncq " : "",
  816. cap & (1 << 28) ? "ilck " : "",
  817. cap & (1 << 27) ? "stag " : "",
  818. cap & (1 << 26) ? "pm " : "",
  819. cap & (1 << 25) ? "led " : "",
  820. cap & (1 << 24) ? "clo " : "",
  821. cap & (1 << 19) ? "nz " : "",
  822. cap & (1 << 18) ? "only " : "",
  823. cap & (1 << 17) ? "pmp " : "",
  824. cap & (1 << 15) ? "pio " : "",
  825. cap & (1 << 14) ? "slum " : "",
  826. cap & (1 << 13) ? "part " : ""
  827. );
  828. }
  829. static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
  830. {
  831. static int printed_version;
  832. struct ata_probe_ent *probe_ent = NULL;
  833. struct ahci_host_priv *hpriv;
  834. unsigned long base;
  835. void __iomem *mmio_base;
  836. unsigned int board_idx = (unsigned int) ent->driver_data;
  837. int have_msi, pci_dev_busy = 0;
  838. int rc;
  839. VPRINTK("ENTER\n");
  840. if (!printed_version++)
  841. dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
  842. rc = pci_enable_device(pdev);
  843. if (rc)
  844. return rc;
  845. rc = pci_request_regions(pdev, DRV_NAME);
  846. if (rc) {
  847. pci_dev_busy = 1;
  848. goto err_out;
  849. }
  850. if (pci_enable_msi(pdev) == 0)
  851. have_msi = 1;
  852. else {
  853. pci_intx(pdev, 1);
  854. have_msi = 0;
  855. }
  856. probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
  857. if (probe_ent == NULL) {
  858. rc = -ENOMEM;
  859. goto err_out_msi;
  860. }
  861. memset(probe_ent, 0, sizeof(*probe_ent));
  862. probe_ent->dev = pci_dev_to_dev(pdev);
  863. INIT_LIST_HEAD(&probe_ent->node);
  864. mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0);
  865. if (mmio_base == NULL) {
  866. rc = -ENOMEM;
  867. goto err_out_free_ent;
  868. }
  869. base = (unsigned long) mmio_base;
  870. hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
  871. if (!hpriv) {
  872. rc = -ENOMEM;
  873. goto err_out_iounmap;
  874. }
  875. memset(hpriv, 0, sizeof(*hpriv));
  876. probe_ent->sht = ahci_port_info[board_idx].sht;
  877. probe_ent->host_flags = ahci_port_info[board_idx].host_flags;
  878. probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask;
  879. probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask;
  880. probe_ent->port_ops = ahci_port_info[board_idx].port_ops;
  881. probe_ent->irq = pdev->irq;
  882. probe_ent->irq_flags = SA_SHIRQ;
  883. probe_ent->mmio_base = mmio_base;
  884. probe_ent->private_data = hpriv;
  885. if (have_msi)
  886. hpriv->flags |= AHCI_FLAG_MSI;
  887. /* initialize adapter */
  888. rc = ahci_host_init(probe_ent);
  889. if (rc)
  890. goto err_out_hpriv;
  891. ahci_print_info(probe_ent);
  892. /* FIXME: check ata_device_add return value */
  893. ata_device_add(probe_ent);
  894. kfree(probe_ent);
  895. return 0;
  896. err_out_hpriv:
  897. kfree(hpriv);
  898. err_out_iounmap:
  899. pci_iounmap(pdev, mmio_base);
  900. err_out_free_ent:
  901. kfree(probe_ent);
  902. err_out_msi:
  903. if (have_msi)
  904. pci_disable_msi(pdev);
  905. else
  906. pci_intx(pdev, 0);
  907. pci_release_regions(pdev);
  908. err_out:
  909. if (!pci_dev_busy)
  910. pci_disable_device(pdev);
  911. return rc;
  912. }
  913. static void ahci_remove_one (struct pci_dev *pdev)
  914. {
  915. struct device *dev = pci_dev_to_dev(pdev);
  916. struct ata_host_set *host_set = dev_get_drvdata(dev);
  917. struct ahci_host_priv *hpriv = host_set->private_data;
  918. struct ata_port *ap;
  919. unsigned int i;
  920. int have_msi;
  921. for (i = 0; i < host_set->n_ports; i++) {
  922. ap = host_set->ports[i];
  923. scsi_remove_host(ap->host);
  924. }
  925. have_msi = hpriv->flags & AHCI_FLAG_MSI;
  926. free_irq(host_set->irq, host_set);
  927. for (i = 0; i < host_set->n_ports; i++) {
  928. ap = host_set->ports[i];
  929. ata_scsi_release(ap->host);
  930. scsi_host_put(ap->host);
  931. }
  932. kfree(hpriv);
  933. pci_iounmap(pdev, host_set->mmio_base);
  934. kfree(host_set);
  935. if (have_msi)
  936. pci_disable_msi(pdev);
  937. else
  938. pci_intx(pdev, 0);
  939. pci_release_regions(pdev);
  940. pci_disable_device(pdev);
  941. dev_set_drvdata(dev, NULL);
  942. }
  943. static int __init ahci_init(void)
  944. {
  945. return pci_module_init(&ahci_pci_driver);
  946. }
  947. static void __exit ahci_exit(void)
  948. {
  949. pci_unregister_driver(&ahci_pci_driver);
  950. }
  951. MODULE_AUTHOR("Jeff Garzik");
  952. MODULE_DESCRIPTION("AHCI SATA low-level driver");
  953. MODULE_LICENSE("GPL");
  954. MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
  955. MODULE_VERSION(DRV_VERSION);
  956. module_init(ahci_init);
  957. module_exit(ahci_exit);