upd64031a.c 6.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244
  1. /*
  2. * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan
  3. *
  4. * 2003 by T.Adachi <tadachi@tadachi-net.com>
  5. * 2003 by Takeru KOMORIYA <komoriya@paken.org>
  6. * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
  7. *
  8. * This program is free software; you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation; either version 2 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21. */
  22. #include <linux/version.h>
  23. #include <linux/module.h>
  24. #include <linux/kernel.h>
  25. #include <linux/i2c.h>
  26. #include <linux/videodev2.h>
  27. #include <media/v4l2-common.h>
  28. #include <media/v4l2-chip-ident.h>
  29. #include <media/v4l2-i2c-drv.h>
  30. #include <media/upd64031a.h>
  31. /* --------------------- read registers functions define -------------------- */
  32. /* bit masks */
  33. #define GR_MODE_MASK 0xc0
  34. #define DIRECT_3DYCS_CONNECT_MASK 0xc0
  35. #define SYNC_CIRCUIT_MASK 0xa0
  36. /* -------------------------------------------------------------------------- */
  37. MODULE_DESCRIPTION("uPD64031A driver");
  38. MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
  39. MODULE_LICENSE("GPL");
  40. static int debug;
  41. module_param(debug, int, 0644);
  42. MODULE_PARM_DESC(debug, "Debug level (0-1)");
  43. enum {
  44. R00 = 0, R01, R02, R03, R04,
  45. R05, R06, R07, R08, R09,
  46. R0A, R0B, R0C, R0D, R0E, R0F,
  47. /* unused registers
  48. R10, R11, R12, R13, R14,
  49. R15, R16, R17,
  50. */
  51. TOT_REGS
  52. };
  53. struct upd64031a_state {
  54. u8 regs[TOT_REGS];
  55. u8 gr_mode;
  56. u8 direct_3dycs_connect;
  57. u8 ext_comp_sync;
  58. u8 ext_vert_sync;
  59. };
  60. static u8 upd64031a_init[] = {
  61. 0x00, 0xb8, 0x48, 0xd2, 0xe6,
  62. 0x03, 0x10, 0x0b, 0xaf, 0x7f,
  63. 0x00, 0x00, 0x1d, 0x5e, 0x00,
  64. 0xd0
  65. };
  66. /* ------------------------------------------------------------------------ */
  67. static u8 upd64031a_read(struct i2c_client *client, u8 reg)
  68. {
  69. u8 buf[2];
  70. if (reg >= sizeof(buf))
  71. return 0xff;
  72. i2c_master_recv(client, buf, 2);
  73. return buf[reg];
  74. }
  75. /* ------------------------------------------------------------------------ */
  76. static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val)
  77. {
  78. u8 buf[2];
  79. buf[0] = reg;
  80. buf[1] = val;
  81. v4l_dbg(1, debug, client, "write reg: %02X val: %02X\n", reg, val);
  82. if (i2c_master_send(client, buf, 2) != 2)
  83. v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val);
  84. }
  85. /* ------------------------------------------------------------------------ */
  86. /* The input changed due to new input or channel changed */
  87. static void upd64031a_change(struct i2c_client *client)
  88. {
  89. struct upd64031a_state *state = i2c_get_clientdata(client);
  90. u8 reg = state->regs[R00];
  91. v4l_dbg(1, debug, client, "changed input or channel\n");
  92. upd64031a_write(client, R00, reg | 0x10);
  93. upd64031a_write(client, R00, reg & ~0x10);
  94. }
  95. /* ------------------------------------------------------------------------ */
  96. static int upd64031a_command(struct i2c_client *client, unsigned cmd, void *arg)
  97. {
  98. struct upd64031a_state *state = i2c_get_clientdata(client);
  99. struct v4l2_routing *route = arg;
  100. switch (cmd) {
  101. case VIDIOC_S_FREQUENCY:
  102. upd64031a_change(client);
  103. break;
  104. case VIDIOC_INT_G_VIDEO_ROUTING:
  105. route->input = (state->gr_mode >> 6) |
  106. (state->direct_3dycs_connect >> 4) |
  107. (state->ext_comp_sync >> 1) |
  108. (state->ext_vert_sync >> 2);
  109. route->output = 0;
  110. break;
  111. case VIDIOC_INT_S_VIDEO_ROUTING:
  112. {
  113. u8 r00, r05, r08;
  114. state->gr_mode = (route->input & 3) << 6;
  115. state->direct_3dycs_connect = (route->input & 0xc) << 4;
  116. state->ext_comp_sync =
  117. (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1;
  118. state->ext_vert_sync =
  119. (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2;
  120. r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode;
  121. r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) |
  122. state->ext_comp_sync | state->ext_vert_sync;
  123. r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) |
  124. state->direct_3dycs_connect;
  125. upd64031a_write(client, R00, r00);
  126. upd64031a_write(client, R05, r05);
  127. upd64031a_write(client, R08, r08);
  128. upd64031a_change(client);
  129. break;
  130. }
  131. case VIDIOC_LOG_STATUS:
  132. v4l_info(client, "Status: SA00=0x%02x SA01=0x%02x\n",
  133. upd64031a_read(client, 0), upd64031a_read(client, 1));
  134. break;
  135. #ifdef CONFIG_VIDEO_ADV_DEBUG
  136. case VIDIOC_DBG_G_REGISTER:
  137. case VIDIOC_DBG_S_REGISTER:
  138. {
  139. struct v4l2_register *reg = arg;
  140. if (!v4l2_chip_match_i2c_client(client,
  141. reg->match_type, reg->match_chip))
  142. return -EINVAL;
  143. if (!capable(CAP_SYS_ADMIN))
  144. return -EPERM;
  145. if (cmd == VIDIOC_DBG_G_REGISTER) {
  146. reg->val = upd64031a_read(client, reg->reg & 0xff);
  147. break;
  148. }
  149. upd64031a_write(client, reg->reg & 0xff, reg->val & 0xff);
  150. break;
  151. }
  152. #endif
  153. case VIDIOC_G_CHIP_IDENT:
  154. return v4l2_chip_ident_i2c_client(client, arg,
  155. V4L2_IDENT_UPD64031A, 0);
  156. default:
  157. break;
  158. }
  159. return 0;
  160. }
  161. /* ------------------------------------------------------------------------ */
  162. /* i2c implementation */
  163. static int upd64031a_probe(struct i2c_client *client,
  164. const struct i2c_device_id *id)
  165. {
  166. struct upd64031a_state *state;
  167. int i;
  168. if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
  169. return -EIO;
  170. v4l_info(client, "chip found @ 0x%x (%s)\n",
  171. client->addr << 1, client->adapter->name);
  172. state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
  173. if (state == NULL)
  174. return -ENOMEM;
  175. i2c_set_clientdata(client, state);
  176. memcpy(state->regs, upd64031a_init, sizeof(state->regs));
  177. state->gr_mode = UPD64031A_GR_ON << 6;
  178. state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4;
  179. state->ext_comp_sync = state->ext_vert_sync = 0;
  180. for (i = 0; i < TOT_REGS; i++)
  181. upd64031a_write(client, i, state->regs[i]);
  182. return 0;
  183. }
  184. static int upd64031a_remove(struct i2c_client *client)
  185. {
  186. kfree(i2c_get_clientdata(client));
  187. return 0;
  188. }
  189. /* ----------------------------------------------------------------------- */
  190. static const struct i2c_device_id upd64031a_id[] = {
  191. { "upd64031a", 0 },
  192. { }
  193. };
  194. MODULE_DEVICE_TABLE(i2c, upd64031a_id);
  195. static struct v4l2_i2c_driver_data v4l2_i2c_data = {
  196. .name = "upd64031a",
  197. .driverid = I2C_DRIVERID_UPD64031A,
  198. .command = upd64031a_command,
  199. .probe = upd64031a_probe,
  200. .remove = upd64031a_remove,
  201. .id_table = upd64031a_id,
  202. };