pata_rb532_cf.c 6.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279
  1. /*
  2. * A low-level PATA driver to handle a Compact Flash connected on the
  3. * Mikrotik's RouterBoard 532 board.
  4. *
  5. * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
  6. * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
  7. *
  8. * This file was based on: drivers/ata/pata_ixp4xx_cf.c
  9. * Copyright (C) 2006-07 Tower Technologies
  10. * Author: Alessandro Zummo <a.zummo@towertech.it>
  11. *
  12. * Also was based on the driver for Linux 2.4.xx published by Mikrotik for
  13. * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
  14. * seems not to have a license.
  15. *
  16. * This program is free software; you can redistribute it and/or modify
  17. * it under the terms of the GNU General Public License version 2 as
  18. * published by the Free Software Foundation.
  19. *
  20. */
  21. #include <linux/kernel.h>
  22. #include <linux/module.h>
  23. #include <linux/platform_device.h>
  24. #include <linux/io.h>
  25. #include <linux/interrupt.h>
  26. #include <linux/irq.h>
  27. #include <linux/libata.h>
  28. #include <scsi/scsi_host.h>
  29. #include <asm/gpio.h>
  30. #define DRV_NAME "pata-rb532-cf"
  31. #define DRV_VERSION "0.1.0"
  32. #define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
  33. #define RB500_CF_MAXPORTS 1
  34. #define RB500_CF_IO_DELAY 400
  35. #define RB500_CF_REG_CMD 0x0800
  36. #define RB500_CF_REG_CTRL 0x080E
  37. #define RB500_CF_REG_DATA 0x0C00
  38. struct rb532_cf_info {
  39. void __iomem *iobase;
  40. unsigned int gpio_line;
  41. int frozen;
  42. unsigned int irq;
  43. };
  44. /* ------------------------------------------------------------------------ */
  45. static inline void rb532_pata_finish_io(struct ata_port *ap)
  46. {
  47. struct ata_host *ah = ap->host;
  48. struct rb532_cf_info *info = ah->private_data;
  49. /* FIXME: Keep previous delay. If this is merely a fence then
  50. ata_sff_sync might be sufficient. */
  51. ata_sff_dma_pause(ap);
  52. ndelay(RB500_CF_IO_DELAY);
  53. set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
  54. }
  55. static void rb532_pata_exec_command(struct ata_port *ap,
  56. const struct ata_taskfile *tf)
  57. {
  58. writeb(tf->command, ap->ioaddr.command_addr);
  59. rb532_pata_finish_io(ap);
  60. }
  61. static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
  62. unsigned int buflen, int write_data)
  63. {
  64. struct ata_port *ap = adev->link->ap;
  65. void __iomem *ioaddr = ap->ioaddr.data_addr;
  66. if (write_data) {
  67. for (; buflen > 0; buflen--, buf++)
  68. writeb(*buf, ioaddr);
  69. } else {
  70. for (; buflen > 0; buflen--, buf++)
  71. *buf = readb(ioaddr);
  72. }
  73. rb532_pata_finish_io(adev->link->ap);
  74. }
  75. static void rb532_pata_freeze(struct ata_port *ap)
  76. {
  77. struct rb532_cf_info *info = ap->host->private_data;
  78. info->frozen = 1;
  79. }
  80. static void rb532_pata_thaw(struct ata_port *ap)
  81. {
  82. struct rb532_cf_info *info = ap->host->private_data;
  83. info->frozen = 0;
  84. }
  85. static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
  86. {
  87. struct ata_host *ah = dev_instance;
  88. struct rb532_cf_info *info = ah->private_data;
  89. if (gpio_get_value(info->gpio_line)) {
  90. set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
  91. if (!info->frozen)
  92. ata_sff_interrupt(info->irq, dev_instance);
  93. } else {
  94. set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
  95. }
  96. return IRQ_HANDLED;
  97. }
  98. static struct ata_port_operations rb532_pata_port_ops = {
  99. .inherits = &ata_sff_port_ops,
  100. .sff_exec_command = rb532_pata_exec_command,
  101. .sff_data_xfer = rb532_pata_data_xfer,
  102. .freeze = rb532_pata_freeze,
  103. .thaw = rb532_pata_thaw,
  104. };
  105. /* ------------------------------------------------------------------------ */
  106. static struct scsi_host_template rb532_pata_sht = {
  107. ATA_PIO_SHT(DRV_NAME),
  108. };
  109. /* ------------------------------------------------------------------------ */
  110. static void rb532_pata_setup_ports(struct ata_host *ah)
  111. {
  112. struct rb532_cf_info *info = ah->private_data;
  113. struct ata_port *ap;
  114. ap = ah->ports[0];
  115. ap->ops = &rb532_pata_port_ops;
  116. ap->pio_mask = 0x1f; /* PIO4 */
  117. ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
  118. ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
  119. ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
  120. ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
  121. ata_sff_std_ports(&ap->ioaddr);
  122. ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
  123. }
  124. static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
  125. {
  126. unsigned int irq;
  127. int gpio;
  128. struct resource *res;
  129. struct ata_host *ah;
  130. struct rb532_cf_info *info;
  131. int ret;
  132. res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  133. if (!res) {
  134. dev_err(&pdev->dev, "no IOMEM resource found\n");
  135. return -EINVAL;
  136. }
  137. irq = platform_get_irq(pdev, 0);
  138. if (irq <= 0) {
  139. dev_err(&pdev->dev, "no IRQ resource found\n");
  140. return -ENOENT;
  141. }
  142. gpio = irq_to_gpio(irq);
  143. if (gpio < 0) {
  144. dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
  145. return -ENOENT;
  146. }
  147. ret = gpio_request(gpio, DRV_NAME);
  148. if (ret) {
  149. dev_err(&pdev->dev, "GPIO request failed\n");
  150. return ret;
  151. }
  152. /* allocate host */
  153. ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS);
  154. if (!ah)
  155. return -ENOMEM;
  156. platform_set_drvdata(pdev, ah);
  157. info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
  158. if (!info)
  159. return -ENOMEM;
  160. ah->private_data = info;
  161. info->gpio_line = gpio;
  162. info->irq = irq;
  163. info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
  164. res->end - res->start + 1);
  165. if (!info->iobase)
  166. return -ENOMEM;
  167. ret = gpio_direction_input(gpio);
  168. if (ret) {
  169. dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
  170. ret);
  171. goto err_free_gpio;
  172. }
  173. rb532_pata_setup_ports(ah);
  174. ret = ata_host_activate(ah, irq, rb532_pata_irq_handler,
  175. IRQF_TRIGGER_LOW, &rb532_pata_sht);
  176. if (ret)
  177. goto err_free_gpio;
  178. return 0;
  179. err_free_gpio:
  180. gpio_free(gpio);
  181. return ret;
  182. }
  183. static __devexit int rb532_pata_driver_remove(struct platform_device *pdev)
  184. {
  185. struct ata_host *ah = platform_get_drvdata(pdev);
  186. struct rb532_cf_info *info = ah->private_data;
  187. ata_host_detach(ah);
  188. gpio_free(info->gpio_line);
  189. return 0;
  190. }
  191. /* work with hotplug and coldplug */
  192. MODULE_ALIAS("platform:" DRV_NAME);
  193. static struct platform_driver rb532_pata_platform_driver = {
  194. .probe = rb532_pata_driver_probe,
  195. .remove = __devexit_p(rb532_pata_driver_remove),
  196. .driver = {
  197. .name = DRV_NAME,
  198. .owner = THIS_MODULE,
  199. },
  200. };
  201. /* ------------------------------------------------------------------------ */
  202. #define DRV_INFO DRV_DESC " version " DRV_VERSION
  203. static int __init rb532_pata_module_init(void)
  204. {
  205. printk(KERN_INFO DRV_INFO "\n");
  206. return platform_driver_register(&rb532_pata_platform_driver);
  207. }
  208. static void __exit rb532_pata_module_exit(void)
  209. {
  210. platform_driver_unregister(&rb532_pata_platform_driver);
  211. }
  212. MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
  213. MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
  214. MODULE_DESCRIPTION(DRV_DESC);
  215. MODULE_VERSION(DRV_VERSION);
  216. MODULE_LICENSE("GPL");
  217. module_init(rb532_pata_module_init);
  218. module_exit(rb532_pata_module_exit);